Search NASA⌕ Search

SEARCH · Search NASA

Results for “interdiffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Controllable Growth of Perovskite Films by Room‐Temperature Air Exposure for Efficient Planar Heterojunction Photovoltaic Cells

Abstract A two‐step solution processing approach has been established to grow void‐free perovskite films for low‐cost high‐performance planar heterojunction photovoltaic devices. A high‐temperature thermal annealing treatment was applied to drive the diffusion of CH 3 NH 3 I precursor molecules into a compact PbI 2 layer to form perovskite films. However, thermal annealing for extended periods led to degraded device performance owing to the defects generated by decomposition of perovskite into PbI 2 . A controllable layer‐by‐layer spin‐coating method was used to grow “bilayer” CH 3 NH 3 I/PbI 2 films, and then drive the interdiffusion between PbI 2 and CH 3 NH 3 I layers by a simple air exposure at room temperature for making well‐oriented, highly crystalline perovskite films without thermal annealing. This high degree of crystallinity resulted in a carrier diffusion length of ca. 800 nm and a high device efficiency of 15.6 %, which is comparable to values reported for thermally annealed perovskite films.

Yang, Bin↗

Controllable Growth of Perovskite Films by Room-Temperature Air Exposure for Efficient Planar Heterojunction Photovoltaic Cells

A two-step-solution-processing approach has been established to grow void-free perovskite films for low-cost and high-performance planar heterojunction photovoltaic devices. We generally applied a high-temperature thermal annealing treatment in order to drive the diffusion of CH 3 NH 3 I precursor molecules into the compact PbI 2 layer to form perovskite films. But, thermal annealing for extended periods would lead to degraded device performance due to the defects generated by decomposition of perovskite into PbI 2 . In this work, we explored a controllable layer-by-layer spin-coating method to grow bilayer CH 3 NH 3 I/PbI 2 films, and then drive the interdiffusion between PbI 2 and CH 3 NH 3 I layers by a simple room-temperature-air-exposure for making well-oriented, highly-crystalline perovskite films without thermal annealing. This high degree of crystallinity resulted in a carrier diffusion length of ~ 800 nm and high device efficiency of 15.6%, which is comparable to the reported values from thermally-annealed perovskite films based counterparts. Finally, the simplicity and high device performance of this processing approach is highly promising for direct integration into industrial-scale device manufacture.

14 SOLAR ENERGY↗

Sulfidation and selenidation of nickel nanoparticles

Abstract Transition metal chalcogenide nanoparticles (NPs) are of interest for energy applications, including batteries, supercapacitors, and electrocatalysis. Many methods have been established for synthesizing Ni NPs, and conversion chemistry to form Ni oxide and phosphides from template Ni NPs is well‐understood. Sulfidation and selenidation of Ni NPs have been much less explored, however. We report a method for the conversion of Ni template NPs into sulfide and selenide product NPs using elemental sulfur, 1‐hexadecanthiol, thiourea, trioctylphosphine sulfide, elemental selenium, and selenourea. While maintaining mole ratios of 2 mmol sulfur/selenium precursor: mmol Ni, products with phases of Ni 3 S 2 , Ni 9 S 8 , NiS, NiSO 4 ·6H 2 O, Ni 3 S 4 , Ni 3 Se 2 , and NiSe have been obtained. The products have voids that form through the Kirkendall effect during interdiffusion. Trends relating the chemical properties of the precursors to the phases of the products have been identified. While some precursors contained phosphorus, there was no significant incorporation of phosphorus in any of the products. An increase of the NP size during sulfidation and selenidation is consistent with ripening. The application of Ni sulfide and selenide NPs as electrocatalysts for the hydrogen evolution reaction is also demonstrated.

Lynch, Brian B.↗

Surface Modification of Nickel-Rich Cathode Materials by Ionically Conductive Materials at Room Temperature

Nickel-rich cathode materials (LiNi x Mn y Co 1-x-y O 2 , NMC) are promising to push the limits of lithium-ion batteries to higher energy density. This approach is favored in practical applications including electric vehicles and aviation transportation. However, the instability of the NMC at charged state results in safety concerns and poor cycling stability. Surface coating is a practical and effective strategy to address this. Cubic Li7La3Zr2O12 (LLZO) is an ideal coating material regarding the low electron transfer rate and high Li+ conductivity. Thus, a LLZO coating layer can suppress the parasitic reactions in the electrode/electrolyte interface without deteriorating the lithium migration. However, high-temperature calcination seems to inevitably create the chemical couplings between NMC and LLZO, leading to the interdiffusion and degradation of NMC and LLZO crystal structures. This work presents a simple mechanochemical method to effectively coat LLZO on the NMC particle surface. Furthermore, the coated cathode demonstrates superior electrochemical performance compared with the pristine NMC cathode.

25 ENERGY STORAGE↗

Characterization of Interaction between Fe‐Infiltrates and LSM Backbone in Solid Oxide Fuel Cells

In this paper, detailed materials characterization analyses on the interaction between FeO x nanoparticles infiltrated onto a La 0.8 Sr 0.2 MnO 3 (LSM) backbone cathode in a solid oxide fuel cell (SOFC) are reported. The infiltration process leads to an increase of 3.4% in cell performance. X‐ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM) as well as energy dispersive X‐ray spectroscopy (EDS) and electron energy loss spectroscopy (EELS) are utilized to perform a comprehensive examination of the microstructure and chemical properties at the interface of the infiltrate and backbone materials. Mn from the LSM backbone diffuses into the FeO x infiltrate and forms a Fe‐Mn‐O spinel. A small amount of Fe also diffuses into the LSM backbone, which could partially be responsible for the enhanced performance of the cell. The valence state of Mn increases from the surface of the Fe‐Mn‐O particle into bulk LSM, with the highest value being at the interface of the Fe‐Mn‐O/LSM backbone. Possible mechanisms are discussed for the change in Mn valence state within the LSM phase. Trace amounts of Mn and La are found in the YSZ phase, as a result of interdiffusion between LSM and YSZ.

Yu, Yang↗

Structural Properties of Nanometer‐Sized Gold Nanoparticles on a Silicon Substrate

Properties of gold nanoparticles (Au NPs) supported on Si substrates, which have been the focus of recent attention, depend sensitively on the size, structure, and coordination of Au NPs as well as on the processes of interdiffusion and chemical bonding at the Au–Si interface. There is a great need, therefore, for developing structural techniques capable of imaging such nanosystems in atomic detail. Here, it is discussed how the atomic structure of nanometer‐sized Au NPs deposited on a silicon surface can be determined by using high‐energy X‐ray diffraction measurements in combination with an analysis based on atomic‐pair‐distribution functions and advanced reverse Monte Carlo methods. This approach delivers simple and incisive pictures of the structure of Au clusters on Si and reveals direct structural evidence for the emergence of a Au‐silicide interface following room temperature deposition of Au NPs on Si. This study will contribute to designing Au/Si nanostructures with desirable properties.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

3D LiMn 2 O 4 nThin Film Deposited by ALD: A Road toward High-Capacity Electrode for 3D Li-Ion Microbatteries

Miniaturized electronics suffer from a lack of energy autonomy. In that context, the fabrication of lithium-ion solid-state microbatteries with high performance is mandatory for powering the next generation of portable electronic devices. Here, the fabrication of a thin film positive electrode for 3D Li-ion microbatteries made by the atomic layer deposition (ALD) method and in situ lithiation step is demonstrated. The 3D electrodes based on spinel LiMn 2 O 4 films operate at high working potential (4.1 V vs Li/Li + ) and are capable of delivering a remarkable surface capacity (approximate to 180 mu Ah cm -2 ) at low C-rate while maintaining more than 40 mu Ah cm -2 at C/2 (time constant = 2 h). Both the thickness of the electrode material and the 3D gain of the template are carefully tuned to maximize the electrode performance. Further, advanced characterization techniques such as transmission electron and X-ray transmission microscopies are proposed as perfect tools to study the conformality of the deposited films and the interfaces between each layer: no interdiffusion or segregation are observed. This work represents a major issue towards the fabrication of 3D-lithiated electrode by ALD-without any prelithiation step by electrochemical technique-making it an attractive solution for the fabrication of 3D Li-ion solid-state microbatteries with semiconductor processing methods.

3D Li-ion micro-batteries↗

Microstructural, Magnetic, and Nanoindentation Studies of the Ball-Milled Ti80Ni20 Alloy

Nanostructured Ti{sub 80}Ni{sub 20} material was elaborated by mechanical alloying from pure Ti and Ni powders in a planetary ball-mill P7 under argon atmosphere at ambient temperature. Morphological, microstructural, magnetic, and nanoindentation properties were studied using scanning electron microscopy, X-ray diffraction, magnetic measurements, and nanoindentation test. The morphological observations show the predominance of the welding phenomenon during the milling process. The Rietveld refinement of the X-ray diffraction pattern reveals, after 4 h of milling, the formation of the disordered hcp-Ti (Ni) solid solution in addition to elemental hcp-Ti and fcc-Ni. On further milling (20 h), the interdiffusion between Ti and Ni atoms is evidenced by the formation of disordered hcp-Ti (Ni) and fcc-Ni (Ti) solid solutions. The saturation magnetization and coercivity values are about of 159.8 emu/g and 80.79 Oe, respectively, after 20 h of milling. M{sub r}/M{sub s} ratio indicates the existence of small magnetic particles which are typically single domains (M{sub r}/M{sub s} 0.1–0.5) and/or multidomain (M{sub r}/M{sub s} < 0.1). Nanohardness values of the sintered powders fluctuates between 1.53 and 5.98 GPa while those of the elastic modulus varies in the range 130.73 to 164.53 GPa.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Growth and Nanofabrication of All-Perovskite Superconducting/Ferromagnetic/Superconducting Junctions

We fabricate and study experimentally all-perovskite-oxide superconductor/ferromagnetic insulator/superconductor (S/FI/S) tunnel junctions made out of the high-temperature cuprate superconductor YBa{sub 2}Cu{sub 3}O{sub 7−y} (YBCO) and the colossal magnetoresistive manganite LaMnO{sub 3} (LMO) in the ferromagnetic insulator state. YBCO/LMO/YBCO heterostructures with different LMO thicknesses (5, 10, and 20 nm) are grown epitaxially via pulsed laser deposition. Nanoscale S/FI/S junctions with sizes down to 300 nm are made by three-dimensional nano-sculpturing with focused ion beam. Junctions with a thick (20 nm) LMO barrier exhibit a large negative magnetoresistance below T{sub Curie}∼160 K, typical for colossal magnetoresistive manganites, as well as a kink in the current-voltage characteristics at large bias (V∼1–2 Volts), attributed to Zener-type tunneling. However, they do not show a measurable Josephson current. On the contrary, junctions with the thinnest 5-nm LMO barrier exhibit a large supercurrent and no signs of magnetism. The latter may indicate the presence of pinholes due to thickness inhomogeneity and/or a ∼ 2 nm dead magnetic layer at the YBCO / LMO interface caused, e.g., by interdiffusion or strain. The junction with an intermediate 10-nm LMO barrier exhibited a desired S/FI/S junction behavior with significant negative magnetoresistance and signatures of a small Josephson current.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mutual Diffusion Coefficients and Refractive Index Increments of K 2 SO 4 (aq) at 298.15 K from Rayleigh Interferometry

Here, isothermal mutual diffusion coefficients (interdiffusion coefficients) were measured for K 2 SO 4 (aq) at 298.15 ± 0.005 K, at numerous concentrations ranging from dilute solutions to near saturation (0.59648 mol∙dm -3 ; 0.61349 mol∙kg -1 ) under free diffusion boundary conditions, using high precision Rayleigh interferometry. Under the experimental conditions these diffusion coefficients are on the volume-fixed reference frame D v . Two series of experiments were performed, the first using the traditional experimental approach with a mercury lamp source and with the interference patterns being recorded on glass photographic plates, and the second with a He-Ne laser light source and computerized data acquisition using a photodiode array. The results from both series of experiments are in excellent agreement, and generally yield diffusion coefficients precise to at least 0.002 x 10 -9 m 2 ∙s 1 (0.15% to 0.19%) and in most cases to 0.001 x 10 -9 m 2 ∙s -1 (0.07% to 0.1%). These experiments also yield accurate values of the refractive index differences for the solution pairs used in the diffusion experiments. The new diffusion coefficients are compared to two sets of published values of diffusion coefficients for K 2 SO 4 (aq) which are somewhat discrepant from each other. This study extends and complements our earlier work on the diffusion coefficients of the most common brine salts: NaCl(aq), KCl(aq), MgCl 2 (aq), CaCl 2 (aq), Na 2 SO 4 (aq), ] MgSO 4 (aq), NaHCO 3 (aq), and KHCO 3 (aq) at 298.15 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influences of superalloy composition and Pt content on the oxidation behavior of gamma–gamma prime NiPtAl bond coatings

Here, the effects of superalloy composition and Pt content on the high-temperature oxidation behavior of γ–γ’ NiPtAl diffusion coatings were investigated over the temperature range of 1050–1150 °C. Simple NiPtAl diffusion coatings with 7 or 12 µm electroplated Pt thickness were evaluated in 1-h cycles in dry O 2 for up to 2500 cycles on four superalloys: directionally solidified (DS) alloy 142, 1st generation single-crystal (SX) alloy 1483, and 2nd generation SX alloys X4 and N5. Coatings on high-Hf alloy 142 experienced severe internal oxidation of Hf at all temperatures. Coatings on ~5 at.% Ti alloy 1483 were protective at 1050 °C, but exhibited severe scale spallation at 1100 °C, with extensive formation of Ti- and Ni-rich oxides at the gas interface. Coatings with 7-µm Pt on X 4 were extremely protective at 1100 °C, but failed rapidly at 1150 °C, which also was associated with the formation of Ti-rich oxides. Increasing the coating Pt content on X 4 improved the 1150 °C oxidation behavior. Coatings on Ti-free N 5 showed the best performance at 1150 °C, especially with 12-µm Pt. Although γ–γ’ coatings can exhibit outstanding cyclic oxidation resistance with minimal Al depletion, they appear to be sensitive to substrate composition, as well as eventual Pt depletion due to interdiffusion.

36 MATERIALS SCIENCE↗

Cation exchange kinetics of pyridinecarboxylic acids

The sorption—desorption kinetics of nicotinic and isonicotinic acids on strong acid cationites (sulfocationite CU-2-8, sulfonated polycalixarene) were considered. The rate of the processes, following both the cation exchange mechanism H{sup +} ⇄ Cat{sup +} and the ion exchange mechanism accompanied by the chemical reaction of protonation of pyridinecarboxylic acid zwitterions, is determined by a slow diffusion of components in the polymeric phase. The interdiffusion coefficient in sulfocationite CU-2-8 for the process H{sup +} ⇄ Cat{sup +} was equal to ~1•10{sup –11} m{sup 2} s{sup –1}, in sulfonated polycalixarene the corresponding value was in the range of (1—4)•10{sup –12} m{sup 2} s{sup –1}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation and Oxidation Performance of a NiCoCrAlYSiHf + NiAl Composite Coating Deposited by Arc Ion Plating and Magnetron Sputtering Techniques

A NiCoCrAlYSiHf+NiAl composite coating was deposited onto a second-generation single-crystal superalloy René N5 by methods of arc ion plating and magnetron sputtering. After vacuum annealing, the composite coating exhibited a gradient distribution of elements, in which Al was enriched in outer layer and Cr was enriched in inner layer. Compared with conventional NiCoCrAlYSiHf and β-NiAl coatings, the composite coating was evaluated in isothermal and cyclic oxidation tests at 1100 °C in ambient air. The results showed that the oxidation rate of the composite coating was lower than that of NiCoCrAlYSiHf coating. Meanwhile, the extent of interdiffusion between coating and substrate in the composite coating was slighter compared with that in the β-NiAl coating. Microstructure evolutions of the composite coating after annealing and further oxidation test are investigated.

36 MATERIALS SCIENCE↗

Thermally Assisted Adhesion Enhancement in High-Phosphorous Electroless Nickel Plating

High-phosphorus electroless nickel is a widely recognized protective plating for oilfield metallic parts subject to corrosion and wear. In the present investigation, thermally activated diffusion treatment was applied to enhance electroless nickel (10-13 wt.% P) plating adhesion on low-alloy steel (UNS G41400) and reduce the risks of spalling. High-phosphorus electroless nickel (10-13 wt.% P) was applied to a variety of UNS G41400 low-alloy steel test samples as per ASTM B733 that were subsequently heat-treated in air for four distinct temperatures, i.e., 510, 540, 570, and 600 °C for 2-10 h. Following post-plating diffusion heat treatments, the initial amorphous electroless nickel was replaced by Ni{sub 3}P precipitates dispersed in a crystalline nickel-rich phase, with an average hardness improvement from 500 to 700 HK. An increased atomic interdiffusion (from 400 to 3.5 µm) was observed at plating–substrate interfaces, resulting in enhanced adhesion and reduced susceptibility toward spalling. This improvement in adhesion was measured repeatedly through post-bending crack analyses and subsequently validated by interface microindentation. Along with diffusion across plating–substrate interface, nickel oxide formation on surface by oxidation was observed to grow at quasi-parabolic rate with no detrimental impact on spalling. In all cases, plating adhesion was improved by heat treatments due to the diffusion-controlled formation of a seemingly ductile layer.

36 MATERIALS SCIENCE↗

Effects of Holding Time on the Sintering of Cemented Tungsten Carbide Powder and Bonding with High-Strength Steel Wire

Cemented tungsten carbide (WC-10Co) and high-strength (AISI 4340) steel were successfully bonded by hot compaction diffusion bonding at a low temperature. The effects of holding time (5-50 min) on microstructure and mechanical properties of the sintered carbides and bonding strengths of the dissimilar bilayered composite materials were examined. The results show that the mechanical properties of the carbides increase, but the bonding strength increases firstly and then decreases with the increase in holding time. The maximum density and hardness achieved are 95.92 and 99.5%, respectively. A transitional layer forms at the interface as a result of elemental interdiffusion. The depth of the layer increases with the increase in holding time. The optimal bonding time is determined to be 40 min at a temperature of 1200°C and a pressure 160 MPa, by which the maximum bonding strength of 204 MPa of the WC-10Co/4340 steel joints can be achieved.

36 MATERIALS SCIENCE↗

Investigation on Microstructure and Mechanical Properties of TA10–Q245R Composite Plate Formed by Explosive Welding

The titanium alloy TA10 and the carbon steel Q245R are welded by explosive welding, and post-weld heat treatment (PWHT) is carried out for the TA10–Q245R composite plate. Microstructure and mechanical properties of the composite plate are investigated both in as-welded (AW) condition and after PWHT, respectively. Results show that, in AW condition, the bonding interface of composite plate presents wavy morphology, and at both sides of the interface plastic deformation is generated to a certain degree. Near the interface interdiffusion zone of alloying elements exists, and no Fe-Ti intermetallic compound is produced at the interface. SEM images indicate that the tensile fracture of composite plate presents the characteristic of ductile fracture, and no defects such as gas pores or impurities are found on the surface of shear fracture. After PWHT, the interfacial microstructure of the composite plate is obviously changed. Compared with the mechanical properties of the composite plate in AW condition, both tensile strength and shear strength of the composite plate are decreased to a certain extent after PWHT. With various factors into consideration, the suitable heat treatment procedure of TA10–Q245R composite plate is determined as follows: 550 °C × 1.5 h.

36 MATERIALS SCIENCE↗

On the Dependence of Durability of Thermal Barrier Coatings on the Oxidation Resistance of Composite Substrate Systems Produced by Diffusing Platinum into Selected Ni-Based Superalloys

Platinum is diffused into the single-crystal superalloys CMSX-4 and CMSX-10 to integrate a surface protection layer consisting of a mixture of γ′- and γ-phases. It is shown that the Pt/CMSX-10 system is characterized by higher thermal stability and resistance to oxidation in comparison with the Pt/CMSX-4 system. Such difference is correlated with the initial microstructure and composition of the two systems and is reflected on their performance in thermal barrier coatings utilizing yttria-stabilized zirconia as top coating. Based upon cyclic oxidation tests, the Pt/CMSX-10 system is found to provide about threefold increase in useful life. However, both coatings are found to fail by spallation of the top coating due to decohesion of the thermally grown oxide developed by each system. It is concluded that the higher performance provided by the Pt/CMSX-10 stems from decelerated kinetics of interdiffusion and oxidation.

36 MATERIALS SCIENCE↗

Investigation of Compatibility Between M-Cr-Al-X Thermal Spray Coatings and Third Generation γ-TiAl Alloys

In this work, the physical and chemical compatibility of cast Ti-Al-Nb-Cr-Zr and Ti-Al-Nb-Cr-Zr-B-La alloys was investigated with oxidation-resistant M-Cr-Al-X thermal spray coatings. Ti and Al are main alloy elements to form γ-TiAl and α{sub 2}-Ti{sub 3}Al phases. To obtain coatings, we used air plasma spray and high-velocity oxygen fuel equipment. Four commercially available M-Cr-Al-X powders, including Ta-containing, were used as starting materials. Our investigation of compatibility between M-Cr-Al-X thermal spray coatings and γ-TiAl alloys consists of isothermal annealing in air muffle furnace during 100 h at 920 °C, followed by samples investigation. Oxidation products formed at coatings surface were studied by XRD analysis with Rietveld refinement. Interdiffusion between coatings and alloys was studied by means of cross-sectional SEM with EDX analysis. Plots were made to show concentration of each main element at the end of experiments. Samples were subjected to dynamic mechanical thermal analysis in order to determine the effect of high-temperature exposure on complex elastic modulus. Finally, burner rig cycling test was performed to estimate the thermal shock resistance of M-Cr-Al-X coatings.

36 MATERIALS SCIENCE↗