SEARCH · Search NASA

Results for “inverted structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

NASA NTRS1983

Coaxial supersonic jet-flows, shock structure and related problems with noise-suppression assessment and prediction

It is now reasonably well established that the intense noise radiated by a single turbulent, heated, under or overexpanded round jet of high specific thrust can be significantly reduced if instead, 'equivalent' multinozzle coaxial supersonic jet flows of the same total thrust and mass flow rate were to be operated in the inverted pressure mode. A summary of some of the relevant observations on the coaxial supersonic jet flows and their shock structure is presented. Attention is given to the scope of the optical studies, the development of shock structure, the effects of exit stagger, coaxial supersonic jet flows with inner nozzle overexpanded, the role of the lip thickness, the role of the exit area ratios, cold/heated coaxial supersonic jet flows, acoustic observations, the conventional pressure mode of operation, comparative noise reduction assessment, and problems and prospects of noise prediction.

Dosanjh, D. S.↗

NASA NTRS1983

Seismic velocity structure of the lunar mantle

The recently completed set of seismic arrival times from the Apollo lunar seismic network are inverted to estimate the average seismic velocities in three sections of the lunar mantle: two for the upper mantle and one for the middle mantle. The method used is a variation of the linearized least squares inversion where the inversion is accomplished in steps. The estimated average velocities in the upper mantle decrease from Vp = 7.74 km/sec and Vs = 4.49 km/sec in the section above 270-km depth to Vp = 7.46 km/sec and Vs = 4.25 km/sec in the section between 270- and 500-km depth, confirming the earlier finding of negative gradients based on seismic amplitude variations. The average velocities in the middle mantle between the depths of 500 km and 1000 km of Vp = 8.26 km/sec and Vs = 4.65 km/sec are significantly higher than those in the upper mantle, contradicting earlier estimates based on more limited data. The higher velocities may suggest initial melting of the moon down to at least 1000-km depth.

Nakamura, Y.↗

NASA NTRS2010

Optimization Testbed Cometboards Extended into Stochastic Domain

COMparative Evaluation Testbed of Optimization and Analysis Routines for the Design of Structures (CometBoards) is a multidisciplinary design optimization software. It was originally developed for deterministic calculation. It has now been extended into the stochastic domain for structural design problems. For deterministic problems, CometBoards is introduced through its subproblem solution strategy as well as the approximation concept in optimization. In the stochastic domain, a design is formulated as a function of the risk or reliability. Optimum solution including the weight of a structure, is also obtained as a function of reliability. Weight versus reliability traced out an inverted-S-shaped graph. The center of the graph corresponded to 50 percent probability of success, or one failure in two samples. A heavy design with weight approaching infinity could be produced for a near-zero rate of failure that corresponded to unity for reliability. Weight can be reduced to a small value for the most failure-prone design with a compromised reliability approaching zero. The stochastic design optimization (SDO) capability for an industrial problem was obtained by combining three codes: MSC/Nastran code was the deterministic analysis tool, fast probabilistic integrator, or the FPI module of the NESSUS software, was the probabilistic calculator, and CometBoards became the optimizer. The SDO capability requires a finite element structural model, a material model, a load model, and a design model. The stochastic optimization concept is illustrated considering an academic example and a real-life airframe component made of metallic and composite materials.

Patnaik, Surya N.↗

DOE OSTI2023

Charged Hole‐Transporting Materials Based on Imidazolium for Defect Passivation in Inverted Perovskite Solar Cells

The hole‐transporting material (HTM) in perovskite solar cells (PSCs) provides an ideal interface with the perovskite layer for hole collection while influencing the perovskite crystalline structure and morphology. This article presents SIM and DIM, two new dopant‐free imidazolium‐based HTMs with charged units accompanied by counter ions that show the potential to function as ionic HTMs and ionic liquid additives and help improve the efficiency and stability of inverted PSCs. DIM‐based PSCs demonstrates exceptional performance with a high‐power conversion efficiency of 19.15%, attributed to improved passivation of perovskite interface defects. Furthermore, these new imidazolium salt‐based HTMs can be manufactured economically, making them a viable option for mass production and PSC commercialization.

Tingare, Yogesh S.↗

DOE OSTI2021

Electronic structure and two-band superconductivity in unconventional high- T c cuprates Ba 2 CuO 3+δ

We report that the recently discovered cuprate superconductor Ba 2 CuO 3+δ exhibits a high T c ≃73 K at δ ≃ 0.2. The polycrystal grown under high pressure has a structure similar to La 2 CuO 4 but with dramatically different lattice parameters due to the CuO 6 octahedron compression. The crystal field in the compressed Ba 2 CuO 4 leads to an inverted Cu 3d e g complex with the d x 2 -y 2 orbital sitting below the d 3z 2 - r 2 and an electronic structure highly unusual compared to the conventional cuprates. We construct a two-orbital Hubbard model for the Cu d 9 state at hole doping x = 2δ and study the orbital-dependent strong correlation and superconductivity. For the undoped case at x = 0 , we found that strong correlation drives an orbital-polarized Mott-insulating state with the spin-1/2 moment of the localized d 3z 2 - r 2 orbital. In contrast to the single-band cuprates where superconductivity is suppressed in the overdoped regime, hole doping the two-orbital Mott insulator leads to orbital-dependent correlations and the robust spin and orbital exchange interactions produce a high-T c antiphase d-wave superconductor even in the heavily doped regime at x = 0.4 . We conjecture that Ba 2 CuO 3+δ realizes mixtures of such heavily hole-doped superconducting Ba 2 CuO 4 and disordered Ba 2 CuO 3 chains in a single-layer or predominately separated bilayer structure. Our findings suggest that unconventional cuprates with liberated orbitals as doped two-band Mott insulators can be a direction for realizing high-T c superconductivity with enhanced transition temperature T c .

36 MATERIALS SCIENCE↗

DOE OSTI2025

Rotated-Droop Control for Enhanced Stability and Power Decoupling in Microgrids With Complex Line Impedances

Classical droop control in microgrids predominantly assumes inductive line impedance, which simplifies implementation but causes power coupling and steady-state errors in systems with resistive and inductive lines. This paper proposes a rotated-droop control strategy for grid-forming inverters that reformulates the power equations by incorporating the magnitude and angle of the line impedance within a rotated reference frame. This method enhances the decoupling of active and reactive power dynamics without increasing complexity or requiring communication links. A small-signal state-space model was created to capture the dynamic behavior of the system under varying impedance parameters, preserving the original droop gains by rotating the power control structure. This allows eigenvalue-based stability analysis and enhances damping and transient performance. Simulation and experimental results validated the improved power-sharing performance, faster response, and robustness of the proposed method under different impedance conditions. This approach maintains the decentralized structure of the conventional droop control while enabling greater adaptability and scalability, making it suitable for modern inverter-based microgrids with dynamic topologies.

Campo-Ossa, Daniel Dario [Univ. of Puerto Rico, Ag↗

NASA NTRS1982

Narrow bursts of intense electron precipitation fluxes within inverted-V events

The rate of energy deposition into the atmosphere by inverted-V event precipitating electrons was computed, from the energy spectra measured by 30 passes of the AE-D satellite, in an attempt to identify small-scale structures within them which may bear a relation to the auroral arcs. High-deposition rate bursts with a duration of less than 5 sec were found inside inverted-V events, and an examination of 45 bursts showed most to have a latitudinal width of less than 0.2 deg, with occurrences over 65-75 deg invariant latitude during the evening hours. Optical emission intensities of 5577 A and 6300 A were inferred from the measured electron fluxes, showing the bursts to be capable of producing bright emissions. Results also suggest that the narrow burst electron fluxes have characteristics appropriate for the causing of discrete auroral arcs in the atmosphere.

Lin, C. S.↗

DOE OSTI2021

Operando X-ray Diffraction Studies of the Mg-Ion Migration Mechanisms in Spinel Cathodes for Rechargeable Mg-Ion Batteries

A promising high-voltage spinel oxide cathode material MgCrMnO 4 with 18% Mg/Mn inversion was synthesized successfully. A new custom operando battery device was designed to study the cation migration mechanisms of the MgCrMnO 4 cathode using 0.1 M Mg(TPFA) 2 electrolyte dissolved in triglyme and activated carbon as the anode. For the first time in multivalent batteries, high-quality operando diffraction data enabled the accurate quantification of cation contents in the host structure. Besides the exceptional reversibility of 12% Mg 2+ insertion in Mg 1- x CrMnO 4 ( x ≤ 1), a partially reversible insertion of excess Mg 2+ during overdischarging was also observed. Moreover, the insertion/extraction reaction was experimentally shown to be accompanied by a series of cation redistributions in the spinel framework, which were further supported by density functional theory calculations. Furthermore, the inverted Mn is believed to be directly involved in the cation migrations, which would cause voltage hysteresis and irreversible structural evolution after overdischarging. Tuning the Mg/Mn inversion rate could provide a direct path to further optimize spinel oxide cathodes for Mg-ion batteries, and more generally, the operando techniques developed in this work should play a key role in understanding the complex mechanisms involved in multivalent ion insertion systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS2002

Isocyanate Cross-Linked Silica: Structurally Strong Aerogels

Molecular-level synergism between the silica nanoparticles of pre-formed monoliths and molecular cross-linkers inverts the relative host-guest roles in glass-polymer composites, leading to new strong low-density materials. Attempts to load gels with variable amounts of polyurethane precursors such as di-ISO and diol end-capped polybutylene adipate followed by heat treatment, washing, and supercritical drying led to opaque materials, somewhat stronger than silica but still quite brittle and much inferior to the materials described above. Direct mixing of a diisocyanate and an alcohol-free sol has been attempted recently by Yim et al. Reportedly, that procedure leads to week-long gelation times and requires an at least equally long aging period. In our attempt to add various amounts of di-ISO in a base-catalyzed sol in PC, we also noticed a week-long gelation time. The resulting aerogels were translucent but no less brittle than native silica. According to more recent studies, if propylene carbonate is replaced with acetone, it leads not only to shorter processing times, but also to much stronger gels that can tolerate loads in excess of 40 kg in the arrangement presented. We attribute that behavior to the lower viscosity of acetone, that allows faster diffusion of the di-ISO solution within the pores before di-ISO has time to react with the surface of silica. Further studies are underway to vary the chemical identity of the diisocyanate, as well as the composition and density of silica.

Leventis, Nicholas↗

DOE OSTI2023

Synthesis and Crystal Structure of the Zintl Phases NaSrSb, NaBaSb and NaEuSb

This work details the synthesis and the crystal structures of the ternary compounds NaSrSb, NaBaSb and NaEuSb. They are isostructural and adopt the hexagonal ZrNiAl-type structure (space group P6¯2m; Pearson code hP9). The structure determination in all three cases was performed using single-crystal X-ray diffraction methods. The structure features isolated Sb3– anions arranged in layers stacked along the crystallographic c-axis. In the interstices, alkali and alkaline-earth metal cations are found in tetrahedral and square pyramidal coordination environments, respectively. The formal partitioning of the valence electrons adheres to the valence rules, i.e., Na+Sr2+Sb3–, Na+Ba2+Sb3– and Na+Eu2+Sb3– can be considered as Zintl phases with intrinsic semiconductor behavior. Electronic band structure calculations conducted for NaBaSb are consistent with this notion and show a direct gap of approx. 0.9 eV. Additionally, the calculations hint at possible inverted Dirac cones, a feature that is reminiscent of topological quantum materials.

36 MATERIALS SCIENCE↗

NASA NTRS1994

Two-Dimensional Scramjet Inlet Unstart Model: Wind-Tunnel Blockage and Actuation Systems Test

This supplement to NASA TM 109152 shows the Schlieren video (10 min. 52 sec., color, Beta and VHS) of the external flow field and a portion of the internal flow field of a two-dimensional scramjet inlet model in the NASA Langley 20-Inch Mach 6 Tunnel. The intent of the overall test program is to study (both experimentally and computationally) the dynamics of the inlet unstart; this (phase I) effort examines potential wind-tunnel blockage issues related to model sizing and the adequacy of the actuation systems in accomplishing the start and unstart. The model is equipped with both a moveable cowl and aft plug. Windows in the inlet sidewalls allow limited optical access to the internal shock structure. In the video, flow is from right to left, and the inlet is oriented inverted with respect to flight, i.e., with the cowl on top. The plug motion is obvious because the plug is visible in the aft window. The cowl motion, however, is not as obvious because the cowl is hidden from view by the inlet sidewall. The end of the cowl actuator arm, however, becomes visible above the inlet sidewalls between the windows when the cowl is up (see figure 1b of the primary document). The model is injected into the tunnel and observed though several actuation sequences with two plug configurations over a range of unit freestream Reynolds number at a nominal freestream Mach number of 6. The framing rate and shutter speed of the camera were too slow to fully capture the dynamics of the unstart but did prove sufficient to identify inlet start and unstart. This series of tests indicated that the model was appropriately sized for this facility and identified operability limits required first to allow the inlet to start and second to force the unstart.

Holland, Scott D.↗

DOE OSTI2026

Neutrinos as Dark Matter

Active neutrinos in standard cosmology were ruled out as a dark matter candidate in the 1980's. The reason is twofold: they are too light to account for the observed energy density of dark matter in the Universe, and their relativistic nature would spoil structure formation. In this note we suggest that an enhanced density of cold Standard Model active neutrinos today could behave effectively as dark matter, avoiding constraints from recombination and structure formation. Such an enhancement could be produced, for instance, by late-time decays of a light scalar field that is not in thermal equilibrium with the plasma. This mechanism is testable through the detection of the Cosmic Neutrino Background (C$\nu$B), which could have an average cosmological energy density a factor of $\sim 100-200$ times larger than expected in $\Lambda$CDM. The postulated light neutrinophilic scalar field may be observable, with Yukawa couplings in the range $y \sim 5 \times 10^{-16}-10^{-12}$. A scenario preferred by structure formation constraints is that the scalar is a Majoron, and the neutrinos have an inverted mass hierarchy.

Cline, James M. [McGill U.] (ORCID:000000017437419↗

NASA NTRS1994

Noise Radiation by Instability Waves in Coaxial Jets

In this paper predictions are made for the noise radiation from supersonic coaxial jets. The noise in the downstream arc of a supersonic jet is dominated by highly directional radiation from the supersonically convecting large scale structures in the jet mixing layer. Since the mean flow is not described easily in terms of simple analytic functions, a numerical prediction is made for its development. The compressible Reynolds-averaged boundary layer equations in cylindrical polar coordinates are solved. A mixing length turbulence model is used. Empirical correlations are developed the effects of velocity and temperature ratio and Mach number. Both normal and inverted velocity profiles are considered. Comparisons with measurements for both single and coaxial jets show good agreement. The large scale structures are modeled as instability waves. The noise radiation generated by the instability waves is determined by a matching between the inner instability wave solution and the outer acoustic solution. Predictions are made for the differences between the noise radiated by coaxial jets with different operating conditions and a single equivalent jet with the same exit area, thrust, and mass-flow.

Dahl, Milo D.↗

DOE OSTI2024

Measurement of the Static Nonlinear Third-Order Elastic Moduli of Rocks: Problems and Applicability

The third-order elastic (TOE) model has been used to describe the widely observed nonlinear mechanical behaviors of earth materials. In addition to linear elastic constants ( λ , μ ), three nonlinear elastic moduli ( A , B , C ) are required for isotropic rocks. Contrary to previous research on dynamic TOE moduli, this study followed the protocol to measure strain and stress under uniaxial and hydrostatic compressive tests statically, which were later used to invert for the full set of TOE moduli for four standard rock types with differing pore structures of a porous oolitic limestone, quartz-rich sandstones, and a dense crystalline basalt. The applicability of the TOE model to characterize nonlinearity depends on the fulfillment of path-independence and small-strain assumptions. Using the measured static TOE moduli, the finite element model demonstrates that the stress in the vicinity of the wellbore is more amplified than the stress in the linear elastic case, which leads to a wider zone of rock failure around the wellbore. Due to the long-standing discrepancy between static and dynamic moduli, the rarely reported full set of static TOE moduli is necessary and will benefit future research in understanding the effect of rock nonlinearity on geophysical and geomechanical applications, such as long-term safe storage of CO 2 and generating process of geohazards.

58 GEOSCIENCES↗

NASA NTRS2007

Microscopic Observation of Self-Propagation of Calcifying Nanoparticles (Nanobacteria)

Biologists typically define living organisms as carbon and water-based cellular forms with :self-replication" as the fundamental trait of the life process. However, this standard dictionary definition of life does not help scientists to categorize self-replicators like viruses, prions, proteons and artificial life. CNP also named nanobacteria were discovered in early 1990s as about 100 nanometer-sized bacteria-like particles with unique apatite mineral-shells around them, and found to be associated with pathological-calcification related diseases. Although CNP have been isolated and cultured from mammalian blood and diseased calcified tissues, and their biomineralizing properties well established, their biological nature and self-replicating capability have always been severely challenged. The terms "self-replication", "self-assembly" or "self-propagation" have been widely used for all systems including nanomachines, crystals, computer viruses and memes. In a simple taxonomy, all biological and non-biological "self replicators", have been classified into "living" or "nonliving" based on the properties of the systems and the amount of support they require to self-replicate. To enhance our understanding about self-replicating nature of CNP, we have investigated their growth in specific culture conditions using conventional inverted light microscope and BioStation IM, Nikon s latest time-lapse imaging system. Their morphological structure was examined using scanning (SEM) and transmission (TEM) electron microscopy. This present study, in conjunction with previous findings of metabolic activity, antibiotic sensitivity, antibody specificity, morphological aspects and infectivity, all concomitantly validate CNP as living self-replicators.

Mathew, Grace↗

DOE OSTI2021

Post-remediation geophysical assessment: Investigating long-term electrical geophysical signatures resulting from bioremediation at a chlorinated solvent contaminated site

There is a growing need to assess long-term impacts of active remediation strategies on treated aquifers. A variety of biogeochemical alterations can result from interactions of the amendment with the aquifer, conceivably leading to a geophysical footprint of the long-term alteration of an aquifer. This concept of post-remediation geophysical assessment was investigated in a shallow, chlorinated solvent-contaminated aquifer six to eight years after amendment delivery. Surface resistivity imaging and cross-borehole resistivity and induced polarization (IP) imaging were performed on a transect that spanned treated and untreated zones of the aquifer. Established relationships between IP parameters and surface electrical conductivity were used to predict vertical profiles of electrolytic conductivity and surface conductivity from the inverted cross-borehole images. Aqueous geochemistry data, along with natural gamma and magnetic susceptibility logs, were used to constrain the interpretation. The electrical conductivity structure determined from surface and borehole imaging was foremost controlled by the electrolytic conductivity of the interconnected pore space, being linearly related to fluid specific conductance. The electrolytic conductivity (and thus the conductivity images alone) did not discriminate between treated and untreated zones of the aquifer. In contrast, inverted phase angles and surface conductivities did discriminate between treated and untreated zones of the aquifer, with the treated zone being up to an order of magnitude more polarizable in places. Supporting aqueous chemistry and borehole logging datasets indicate that this geophysical footprint of the long-term impact of the remediation on the aquifer is most likely associated with the formation of polarizable, dispersed iron sulfide minerals. The study opens the door to the possibility of employing time-lapse electrical geophysical measurements to assist with long-term environmental stewardship of legacy sites undergoing active remediation.

bioremediation↗

DOE OSTI2021

Interplay Between Crustal‐Scale Thrusting, High Metamorphic Heating Rates, and the Development of Inverted Thermal‐Metamorphic Gradients: Numerical Models and Examples From the Caledonides of Northern Scotland

Abstract Understanding the processes that produce high prograde metamorphic heating rates and the development of inverted metamorphic sequences in collisional thrust belts remains a fundamental challenge for tectonics and metamorphic petrology. New 2D finite element models of crustal‐scale thrusts with variable slip rates (10, 20, 35, 50 km Myr −1 ) are used to examine how thrust sheet emplacement contributes to these processes. In the models, average prograde heating rates of 31–118 °C Myr −1 are observed in the footwall, with maximum transient heating rates of ∼167 °C Myr −1 occurring at the highest slip rate. Also, thrust sheet emplacement produces an inverted thermal gradient in the model footwall. At slip rates of 10 km Myr −1 , heating magnitudes >200 °C are observed >7 km structurally beneath the thrust plane. At slip rates of 20–50 km Myr −1 , models produce thermal penetration depths of 4–5 km for similar heating magnitudes. Petrologically determined heating rates for thrust footwalls in the Scandian orogenic wedge of northern Scotland mostly yield rates consistent with model results (10–230 °C Myr −1 ). The model‐derived magnitude of inverted thermal gradients is also similar to those indicated in texturally determined deformation temperature transects across the Scandian orogenic wedge (100 °C–180 °C). Combined, these results indicate that high heating rates can be produced by fault slip at typical plate velocities. Additionally, this implies that crustal‐scale thrusts are likely to produce inverted metamorphic sequences in most systems, provided that P‐T conditions during slip allow for metamorphic or recrystallization processes that would preserve evidence for such features.

Thigpen, J. Ryan↗

NASA NTRS1985

Cosmological density fluctuations and large-scale structure From N-point correlation functions to the probability distribution

Knowledge of N-point correlation functions for all N allows one to invert and obtain the probability distribution of mass fluctuations in a fixed volume. The hierarchical sequence of higher order is applied to correlations with dimensionless amplitudes suggested by the BBGKY equations. The resulting distribution is significantly non-Gaussian, even for quite small mean square fluctuations. The qualitative and to some degree quantitative results are to a large degree independent of the exact sequence of amplitudes. An ensemble of such models compared with N-body simulations fails in detail to account for the low-density frequency distribution.

Fry, J. N.↗