Search NASA⌕ Search

SEARCH · Search NASA

Results for “ion-exchange”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Self‐Assembled Membranes for High Ion Selectivity and Proton Blocking in Electrochemical Applications

Anion-exchange membranes (AEMs) with high anion/cation selectivity and exceptional proton-blocking ability are critical for applications such as bipolar membrane electrodialysis and electrochemical acid recovery. However, existing AEMs are constrained by a trade-off between ionic conductivity and selectivity, largely due to the intrinsic coupling between charge density and water content, and they suffer from excessive proton leakage facilitated by the Grotthuss hopping mechanism. In this work, poly(vinylimidazolium) membranes functionalized with long alkyl side chains that self-assemble into well-defined microphase-separated morphologies stabilized by hydrophobic and electrostatic interactions are reported. These unique structures localize the charge density along the polymer backbone to promote fast and selective ion transport. As a result, these membranes exhibit ionic conductivities and counter-ion diffusivities surpassing those of conventional homogeneous membranes, along with unprecedented counter-ion/co-ion selectivity and proton-blocking ability. These results establish a new design paradigm for high-performance, phase separated charged polymer membranes that overcome the limitations of homogeneous membranes, with broad implications for advanced electrochemical technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Time‐Dependent Cation Selectivity of Titanium Carbide MXene in Aqueous Solution

Abstract Electrochemical ion separation is a promising technology to recover valuable ionic species from water. Pseudocapacitive materials, especially 2D materials, are up‐and‐coming electrodes for electrochemical ion separation. For implementation, it is essential to understand the interplay of the intrinsic preference of a specific ion (by charge/size), kinetic ion preference (by mobility), and crystal structure changes. Ti 3 C 2 T z MXene is chosen here to investigate its selective behavior toward alkali and alkaline earth cations. Utilizing an online inductively coupled plasma system, it is found that Ti 3 C 2 T z shows a time‐dependent selectivity feature. In the early stage of charging (up to about 50 min), K + is preferred, while ultimately Ca 2+ and Mg 2+ uptake dominate; this unique phenomenon is related to dehydration energy barriers and the ion exchange effect between divalent and monovalent cations. Given the wide variety of MXenes, this work opens the door to a new avenue where selective ion‐separation with MXene can be further engineered and optimized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Response surface methodology guided adsorption and recovery of free fatty acids from oil using resin

The presence of free fatty acids interferes with the conversion of plant oils to biodiesel. In this work, four strong and weak base resins were evaluated for the removal of free fatty acids (FFA) from oil. Amberlite FPA 51 showed the highest adsorption capacity of FFA. A resin concentration above 3% could enable a higher percentage FFA adsorption. The adsorption process fitted a pseudo-first-order kinetic model and achieved equilibrium in approximately 8 h. A full factorial design was used to optimize the resin and FFA concentrations at a fixed temperature (40°C). A ratio of resin to fatty acid concentrations above 1.875 was sufficient for 70% adsorption and the amount adsorbed continued to increase with further added resin. A two-step washing of resin using hexane and ethanol recovered approximately 67.55%±4.05% of the initially added fatty acid. The resin that was used was regenerated with 5% NaOH and re-used for a minimum of three consecutive cycles. However, the adsorption capacity diminished to 75% of the initial cycle in cycles 2 and 3. Thus, the work presents a resin-based process for deacidification of oil to reduce fatty acid content of oil for biodiesel production.

09 BIOMASS FUELS↗
DOE OSTI2021

Characterizing mechanical and microstructural properties of novel montmorillonite-rich polyethylene composites

Montmorillonite (MMT) clays are important industrial materials used as catalysts, chemical sorbents and fillers in polymer–clay nanocomposites. The layered structure of these clays has motivated research into further applications of these low-cost materials, including use as ion exchange media and solid-state ionic conductors. In these applications, the mechanical properties of MMT are key when considering long-term, reliable performance. Previous studies have focused on the mechanical properties of nanocomposites with MMT as the minority component or pure MMT thin films. In this work, the microstructure and mechanical properties of pure MMT and majority MMT/polyethylene composites pressed into dense pellets are examined. Characterization methods such as X-ray diffraction, atomic force microscopy and scanning electron microscopy together with nanoindentation reveal important structure–property relationships in the clay-based materials. Here, utilizing these techniques, we have discovered that MMT processing impacts the layered microstructure, chemical stability and, critically, the elastic modulus and hardness of bulk MMT samples. Particularly, the density of the pellets and the ordering of the clay platelets within them strongly influence the elastic modulus and hardness of the pellets. By increasing pressing force or by incorporating secondary components, the density, and therefore mechanical properties, can be increased. If the layered structure of the clay is destroyed by exfoliation, the mechanical properties will be compromised. Understanding these relationships will help guide new studies to engineer mechanically stable MMT-based materials for industrial applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Deactivation trends of Pd/SSZ-13 under the simultaneous presence of NO, CO, hydrocarbons and water for passive NO x adsorption

Pd-functionalized chabazite (Pd/SSZ-13) was evaluated for passive NO x adsorption (PNA) using low temperature combustion with diesel (LTC-D) reaction feed of the “United States Driving Research and Innovation for Vehicle efficiency and Energy sustainability” (U.S.DRIVE) protocol. Notably as per the protocol conditions, 12% O 2 + 6% CO 2 + 6% H 2 O was flown in all cases. NO-uptake studies in the presence of the LTC-D feed showed a systematic decline with (NO:Pd)molar changing from 0.5 to 0.4 after 10 trials. Control experiments showed more pronounced decline for NO + CO case, with appreciable intial (NO:Pd)molar value of 0.4 yet comparable-to-the-LTC-D-feed decline after 8 trials. CO-induced particle formation and larger extent of particle sintering was also evident from TEM analysis. Other controls did not exhibit trial-dependent deactivation as(NO:Pd)molar values were constant, at 0.3, 0.2, 0.5 and 0.2 for the NO, NO+H 2 , NO + unsaturated hydrocarbon (C 2 H 4 , C 3 H 6 ) and NO + saturated HC (C 3 H 8 , C 10 H 22 ) feeds respectively. In addition to these quantitative differences, desorption behaviors are qualitatively different. While only one major desorption event is observed for the full LTC-D, NO+ CO and NO+ unsaturated HC-controls, desorption occurs in two distinct stages for NO, NO + saturated HCs and initial-NO+H 2 trials. This arises due to inherent differences in Pd sites while exposed to these chemically distinct feeds. Furthermore, presence of reducing agents such as CO and unsaturated HCs in the feed result in almost complete elimination of lower, sub-200 °C desorption peak. The higher temperature desorption peaks, at > 300 °C is associated with NO strongly bound to ionic Pd sites and are prevalent under reducing conditions. Using DRIFTS also, three complexes leading to PNA are assigned, [O = N–Pd 2 +(OH)–Z], [O = N–Pd 2 +(Z2)] and [O = N–Pd 2 +(H 2 O)y–Z] with the latter being clearly observed upon water exposure. Pd/SSZ-13 showed higher hydrocarbon trapping than the SSZ-13 counterpart.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Enhanced pozzolanic reactivity in hydrogen-form zeolites as supplementary cementitious materials

Pozzolans rich in silica and alumina react with lime to form cementing compounds and are incorporated into portland cement as supplementary cementitious materials (SCMs). However, pozzolanic reactions progress slower than portland cement hydration, limiting their use in modern construction due to insufficient early-age strength. Hence, alternative SCMs that enable faster pozzolanic reactions are necessary including synthetic zeolites, which have high surface areas and compositional purity that indicate the possibility of rapid pozzolanic reactivity. Synthetic zeolites with varying cation composition (Na-zeolite, H-zeolite), SiO 2 /Al 2 O 3 ratio, and framework type were evaluated for pozzolanic reactivity via Ca(OH) 2 consumption using ion exchange and in-situ X-ray diffraction experiments. Na-zeolites exhibited limited exchange reactions with KOH and Ca(OH) 2 due to the occupancy of acid sites by Na + and hydroxyl groups. Meanwhile, H-zeolites readily adsorbed K + and Ca 2+ from a hydroxide solution by exchanging cations with H + at Brønsted acid sites or cation adsorption at vacant acid sites. By adsorbing cations, the H-zeolite reduced the pH and increased Ca 2+ solubility to promote pozzolanic reactions in a system where Ca(OH) 2 dissolution/diffusion was a rate limiting factor. High H-zeolite reactivity resulted in 0.8 g of Ca(OH) 2 consumed per 1 g of zeolites after 16 h of reaction versus 0.4 g of Ca(OH) 2 consumed per 1 g of Na-zeolite. The H-zeolite modulated the pore fluid alkalinity and created a low-density amorphous silicate phase via mechanisms analogous to two-step C-S-H nucleation experiments. Finally, controlling these reaction mechanisms is key to developing next generation pozzolanic cementitious systems with comparable hydration rates to portland cement.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Cation uptake by fine aggregate in hardened cement mortar and its effect on electrical properties

Electrical resistivity tests can be used to evaluate the transport properties of concrete and provide a durability assessment. However, the electrical resistivity is largely dependent on the pore solution composition and recent work suggests that some aggregates have the capacity for cation uptake. This study first aims to provide further evidence for adsorption of cations on aggregate surfaces, without formation of reaction products (e.g. alkali-silica reaction). Secondly, hardened mortar samples were prepared using a fine aggregate with a high alkali affinity and a non-reactive fine aggregate as a control. The electrical resistivity of mortars was measured, and the pore solution of these mortars was obtained through high-pressure extraction. The effect of aggregate moisture dilution on the pore solution was decoupled by using a pore partitioning model. The results indicate that aggregate minerology can influence the pore solution composition through cation uptake. Specific minerals of minor quantity, like biotite, may be responsible for cation exchange. While adsorbed cations strongly affected pore solution and formation factor measurement, the bulk resistivity measurements on hardened mortar were only marginally influenced. Research on other implications of similar aggregate interactions with pore solutions are an intriguing area for future research.

Alkali-aggregate reaction↗
DOE OSTI2020

Degradation mechanism of lead-vanado-iodoapatite in NaCl solution

Degradation mechanism of lead-vanado-iodoapatite (IAPT) in NaCl solution at 90 °C was investigated through systematic characterization of surface morphology, microstructure and microchemistry evolution of the alteration layer. Nano-scale characterization indicated that IAPT crystals degraded from grain boundaries toward inner grains, forming ultrafine Cl-bearing crystallites. A coupled interface dissolution-reprecipitation replacement mechanism and the ion exchange between Cl - and I - across the degradation zone may together play roles in determining the nano-scale degradation behavior of IAPT. This work highlights the degradation through multiple reactions and elemental transport across the liquid-solid and solid-solid interfaces at length scales from sub-millimeter to nanoscale.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Thermodynamics and kinetics of interconversion between platinum nanoparticles and cations in zeolites

In metal-containing zeolites, sintering and redispersion processes exercise control over the identity of metal site structures, but the thermodynamic and kinetic factors that influence these molecular-level processes are not completely understood. Furthermore, we assess the ability of first principles informed free energy models (for supported and unsupported nanoparticles) and kinetic models integrating Ostwald ripening with atom trapping to describe the interconversion between Pt cations and nanoparticles encapsulated in chabazite (CHA) zeolites. Density functional theory-derived thermodynamic phase diagrams show that the interconversion between cations, favored in oxidizing environments, and particles, favored in reducing environments, is fully reversible within a wide range of their respective conditions (temperatures and pressures) for CHA and several other zeolite topologies. Kinetic Monte Carlo simulations of Pt redispersion are consistent with experimentally observed redispersion kinetics of encapsulated Pt nanoparticles in CHA zeolites, and model results suggest the zeolite host imparts additional stability for Pt nanoparticles. We envision our thermodynamic and kinetic models for Pt-CHA are also capable of describing nanoparticle and cation interconversions for other zeolite frameworks under similar conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Adsorptive recovery of volatile fatty acids from wastewater fermentation broth

This work developed an adsorptive separation and recovery process for anaerobically generated volatile fatty acids (VFAs) from swine wastewater fermentation. Batch adsorption studies were conducted using several weak anion exchange resins and synthetic adsorbent resins to identify a suitable candidate. Relite RAM2 with a tertiary amine functional group showed the highest adsorption (over 98%) of hexanoic acid. Under the different pH values (1.8–7.5) and extraction temperatures (30–50 ↑C), the highest adsorption was observed at a pH of 3.2, which is below the pKa of hexanoic acid, at all the evaluated temperatures. A full factorial design was used to optimize the resin and VFA concentrations, wherein over 99% adsorption could be achieved when the ratio of VFA to resin was below 0.23 (g/g) for model solution (VFAs in water). The adsorption equilibrium could be achieved within 30 min of contact time and 0.5% w/v NaOH was identified as a suitable desorption agent. Under the optimal conditions, 65–72% of VFAs present in fermentation broth was adsorbed, which was increased to 72–76% by using fresh resins. The VFAs adsorption and recovery efficiency were maintained for 9 successive cycles without requiring extensive resin washing and regeneration for both model solution and fermentation broth. Altogether, the work presents a comprehensive study for resin adsorption to recover VFAs and provides a potential industrial-relevant process to recover VFAs from fermentation broth.

09 BIOMASS FUELS↗
DOE OSTI2020

Co-ion specific effect on sodium halides sorption and transport in a cross-linked poly(p-styrene sulfonate-co-divinylbenzene) for membrane applications

Here, sodium halide sorption and transport in a cation exchange membrane based on cross-linked poly(p-styrene sulfonate-co-divinylbenzene) (CR61) were investigated experimentally and theoretically. At fixed co-ion valence, sodium halide partitioning between aqueous electrolyte solutions and ion exchange polymers is only minimally sensitive to co-ion chemical identity. NaCl, NaF and NaI exhibit similar solubility coefficients in CR61, which agrees reasonably well with predictions of the Donnan-Manning model, especially at high external salt concentrations. Ion activity coefficients in the membrane were evaluated and ion sorption thermodynamics were investigated. Ion diffusion coefficients in CR61 were predicted using a recently developed framework based on the Manning diffusion model, which accounts for electrostatic effects on ion diffusion, and the Mackie-Meares model, which accounts for tortuosity/area effects on ion diffusion in swollen polymers. Model predictions agree reasonably well with the experimental data, especially at high external salt concentrations. The observed decrease in salt diffusion coefficients in CR61 relative to values in aqueous solutions is due primarily to tortuosity/area effects. Salt diffusion coefficients correlate with co-ion hydrated radius and membrane water content. Finally, salt permeability coefficients predicted using the solution-diffusion model exhibit good agreement with experimental data, especially at external salt concentration greater than 0.1 mol/L.

42 ENGINEERING↗
DOE OSTI2022

Electrodialysis through nafion membranes coated with polyelectrolyte multilayers yields >99% pure monovalent ions at high recoveries

Separation of monovalent and multivalent ions is important in processes ranging from water softening to recycling of Li. Previous studies show that cation-exchange membranes coated with multilayer polyelectrolyte films exhibit monovalent/divalent ion selectivities as high as 1000 in electrodialysis (ED) under ideal conditions with low ion recoveries. This work shows that even at 60-80% monovalent-ion recoveries, ED through Nafion membranes coated with protonated poly(allylamine)/poly(4-styrenesulfonate) multilayers can separate equimolar K + and Mg 2+ or Li + and Mg 2+ to give 99.5% pure monovalent ion. Moreover, the use of a low-volume receiving phase allows ED to concentrate the monovalent ion. Typical current efficiencies are around 70% for these separations. Selectivities appear to increase when the membrane-coating procedure uses a higher polyelectrolyte concentration in the deposition solution. Because the limiting current declines with ED time due to depletion of the monovalent ion in the source phase, use of a gradually decreasing applied current enhances current efficiency compared to ED at a constant high current. Further, the membranes also show Li + /Mg 2+ selectivities around 100 when Mg 2+ is in a 20-fold excess in the source phase at an ionic strength of 0.6 M, but selectivity decreases at even higher ionic strengths.

15 GEOTHERMAL ENERGY↗
DOE OSTI2022

Accurately measuring the ionic conductivity of membranes via the direct contact method

Accurately measuring the ionic conductivity of membranes is important both for assessing the performance of new membranes as well as for advancing the fundamental understanding of electric field-driven ion transport in membranes. Yet, despite a considerable number of reports on the topic, there is no standardized method for ionic conductivity measurements. One of the main challenges with ionic conductivity measurements is isolating the membrane resistance from the other resistances in the electrochemical cell. In this study, we present a detailed discussion of factors that affect ionic conductivity measurements with the commonly used direct contact method, in which the membrane contacts the electrodes. Such factors include external resistances due to imperfect contact between the membrane and electrodes, residual impedances due to the sample holder and wiring, and fringe effects. Further, we also present and validate simple methods for isolating the true membrane ionic conductivity in both the through-plane and in-plane orientations. These methods can be implemented with virtually any membrane to obtain accurate and reproducible ionic conductivity values. Finally, we outline recommendations for performing ionic conductivity measurements with the direct contact method and a set of parameters to verify when reporting these results.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Extended Donnan-Manning theory for selective ion partition and transport in ion exchange membrane

The use of ion exchange membranes (IEMs) for electrochemical ion-ion separation leverages the selectivity of the IEMs toward like-charged species via valence difference and/or other ion membrane interactions. A mechanistic model that relates selectivity with membrane structural and chemical properties is lacking in the literature. Here, in this study, we extend the Manning’s counter-ion condensation model for describing ion partition and ion mobility inside IEMs to mixed salts scenarios. We evaluate the extended Donnan-Manning model against experimental data from literature and compare the performance the Donnan-Manning model to that of the ideal Donnan model and the Donnan-Affinity model. Our analysis shows that, despite its structural complexity, the Donnan-Manning model has less fitting parameters than the Donnan-Affinity model and generally outperforms the two other models in predicting counter-ion and co-ion partition. With the assumption of a higher mobility of condensed ions than that of uncondensed ions, the generalized Manning’s model can also predict counter-ion mobility selectivity for cation exchange membranes, but its performance for predicting mobility selectivity for anion exchange membranes is still unsatisfactory.

42 ENGINEERING↗
DOE OSTI2025

Selective concentration of multivalent cations via electrodialysis through tandem membranes

Selective electrodialysis is attractive for recovering and recycling valuable ions. However, most studies in this field focus on membranes that are selective for monovalent ions. Multivalent cations preferentially partition into cation-exchange membranes, but low mobilities and concentration polarization limit electrodialysis selectivities for these cations. This work employs electrodialysis through an “in-series” combination of a Nafion membrane and a multilayer polyelectrolyte film (MPF)-coated Nafion membrane to concentrate and isolate La 3+ or Mg 2+ from monovalent ions. The bare Nafion membrane gives a La 3+ /Na + selectivity up to 4 (depending on conditions), which enables concentration of La 3+ with a high current efficiency. The MPF-coated membrane allows selective passage of Na + while rejecting La 3+ to increase the purity of the concentrated multivalent cation. For example, the concentration of La 3+ in the accumulation solution can reach 9 times its original concentration in the feed solution with a purity of 93 mol% (99 wt%) when starting with equimolar mixtures of NaNO 3 and La(NO 3 ) 3 . This study examines how the separation varies with the type of polyelectrolyte, the applied voltage, and the composition of feed, accumulation, and cathode solutions. Here, a high nitric acid concentration (0.5 M) in the cathode compartment allows monovalent anions to pass through the MPF-coated Nafion membrane to maintain the electroneutrality of the accumulation solution. With a low acid concentration (0.04 M) in the cathode chamber, water splitting occurs at the MPF-coated membrane and La(OH) 3 precipitates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Hybrid Sorbents for 129 I Capture from Contaminated Groundwater

Radioiodine ( 129 I) poses a risk to the environment due to its long half-life, toxicity, and mobility. It is found at the U.S. Department of Energy Hanford Site due to legacy releases of nuclear wastes to the subsurface where 129 I is predominantly present as iodate (IO 3 – ). To date, a cost-effective and scalable cleanup technology for 129 I has not been identified, with hydraulic containment implemented as the remedial approach. Here, novel high-performing sorbents for 129 I remediation with the capacity to reduce 129 I concentrations to or below the US Environmental Protection Agency (EPA) drinking water standard and procedures to deploy them in an ex-situ pump and treat (P&T) system are introduced. Furthermore, this includes implementation of hybridized polyacrylonitrile (PAN) beads for ex-situ remediation of IO 3 – -contaminated groundwater for the first time. Iron (Fe) oxyhydroxide and bismuth (Bi) oxyhydroxide sorbents were deployed on silica substrates or encapsulated in porous PAN beads. In addition, Fe–, cerium (Ce)–, and Bi–oxyhydroxides were encapsulated with anion-exchange resins. The PAN–bismuth oxyhydroxide and PAN–ferrihydrite composites along with Fe- and Ce-based hybrid anion-exchange resins performed well in batch sorption experiments with distribution coefficients for IO 3 – of >1000 mL/g and rapid removal kinetics. Of the tested materials, the Ce-based hybrid anion-exchange resin was the most efficient for removal of IO 3 – from Hanford groundwater in a column system, with 50% breakthrough occurring at 324 pore volumes. The functional amine groups on the parent resin and amount of active sorbent in the resin can be customized to improve the iodine loading capacity. These results highlight the potential for IO 3 – remediation by hybrid sorbents and represent a benchmark for the implementation of commercially available materials to meet EPA standards for cleanup of 129 I in a large-scale P&T system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Removal of Selenium Oxyanions from Aqueous Solutions by Ion Exchange: Equilibrium, Kinetics, and Mechanistic Modeling

Selenium (Se) is an essential micronutrient but toxic at high concentrations, posing challenges for water treatment. This study investigated the removal of selenate (SeO 4 2– ) and selenite (SeO 3 2– ) using the strong-base anion-exchange resin IRA-900, particularly in the presence of competing sulfate (SO 4 2– ). The performance of the commercially available resin IRA-900 was systematically investigated. The batch equilibrium behavior was studied in both single- and binary-component systems, and the kinetic behavior was investigated in single-component systems. Results confirmed a selectivity order of SeO 4 2– > SO 4 2– > SeO 3 2– , indicating preferential SeO 4 2– removal over competing SO 4 2– but lower affinity for SeO 3 2– . The maximum total exchange capacity was determined to be 2.04 mequiv/g. Furthermore, SeO 3 2– uptake was found to be pH-dependent, whereas SeO 4 2– uptake remained stable across a broad pH range. From a modeling perspective, the Law of Mass Action model effectively described equilibrium data, and a transport–reaction modeling framework captured removal kinetics of oxyanions including film and intraparticle diffusion. Finally, X-ray photoelectron spectroscopy confirmed ion exchange between chloride and Se oxyanions as the primary removal mechanism. These findings provide fundamental insights into the removal of Se oxyanions from aqueous solutions by ion exchange.

IRA-900↗