Search NASA⌕ Search

SEARCH · Search NASA

Results for “kinetic instabilities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Evaluation of Cathode Materials with Lithium-Metal Anodes: Baseline Performance and Protocol Standardization of Coin Cells

The collaborative evaluation of electrode materials across multiple research entities requires standardized electrochemical testing protocols to produce reliable, one-to-one comparisons between different systems of interest. Similar to the work done by Long et al. on protocol standardization for coin-cell testing with graphite anodes [J. Electrochem. Soc., 163, A2999, (2016)], here we introduce two standardized testing protocols designed to quickly evaluate important electrochemical properties of cathode materials using lithium-metal anodes. The two protocols measure kinetic and thermodynamic capacity losses, rate- and voltage-dependent cycling capacities, instabilities at high voltage and high cycling rate, and overpotentials at various states of charge. We then apply these protocols to four commercially available cathode materials to establish benchmark performance metrics that can be used to screen and evaluate new cathode materials.

25 ENERGY STORAGE↗
DOE OSTI2023

Interaction of Inner Heliosheath Ions with Electromagnetic Ion Cyclotron Waves

Abstract Inner heliosheath (IHS) ions are expected to be exposed to various waves, shocks, and turbulence, which can affect ion distributions and thus their charge-exchange rates with interstellar neutral atoms. This work addresses the potential significance of electromagnetic ion cyclotron (EMIC) waves under expected IHS conditions. From a kinetic dispersion relation, we find the possibility of frequent triggering of EMIC instability in the IHS. The threshold anisotropy of proton temperatures required for the instability is small, ( T ⊥ – T ∣∣ )/ T ∣∣ ≈ 0.1 or less, mainly due to high plasma β (ratio of the plasma to magnetic pressures). Numerical calculations on the scattering of ions (protons, He + , and He 2+ with energy of 0.01–50 keV) based on two models for EMIC waves with a moderate intensity indicate significant scattering in the pitch angle (mostly a few tens of degrees) and energy (mostly a few tens of percent) although details depend on the energy and pitch angle of each species and adopted EMIC wave models. This occurs on a short timescale (<100 times the gyro-period of each ion species). Resonant scattering in a few to a few tens of keV (corresponding to the expected pickup ion energy in the IHS) is easily expected unless the wavenumber is too large. The scattering effect is distinguished among different species such that for lower gyrofrequency ions (He + versus He 2+ and He 2+ versus protons), the main scattering effect moves toward a lower energy domain. All these results imply continuous disturbance of ion distributions by possibly prevailing EMIC waves in the IHS.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Hybrid particle-in-cell simulations of electromagnetic coupling and waves from streaming burst debris

Various systems can be modeled as a point-like explosion of ionized debris into a magnetized, collisionless background plasma-including astrophysical examples, active experiments in space, and laser-driven laboratory experiments. Debris streaming from the explosion parallel to the magnetic field may drive multiple resonant and non-resonant ion-ion beam instabilities, some of which can efficiently couple the debris energy to the background and may even support the formation of shocks. We present a large-scale hybrid (kinetic ions + fluid electrons) particle-in-cell simulation, extending hundreds of ion inertial lengths from a 3D explosion, that resolves these instabilities. We show that the character of these instabilities differs notably from the 1D equivalent by the presence of unique transverse structure. Additional 2D simulations explore how the debris beam length, width, density, and speed affect debris-background coupling, with implications for the generation of quasi-parallel shocks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Baroclinic Control of Southern Ocean Eddy Upwelling Near Topography

In the Southern Ocean, mesoscale eddies contribute to the upwelling of deep waters along sloping isopycnals, helping to close the upper branch of the meridional overturning circulation. Eddy energy (EE) is not uniformly distributed along the Antarctic Circumpolar Current (ACC). Instead, “hotspots” of EE that are associated with enhanced eddy-induced upwelling exist downstream of topographic features. This study shows that, in idealized eddy-resolved simulations, a topographic feature in the ACC path can enhance and localize eddy-induced upwelling. However, the upwelling systematically occurs in regions where eddies grow through baroclinic instability, rather than in regions where EE is large. Across a range of parameters, along-stream eddy growth rate is a more reliable indicator of eddy upwelling than traditional parameterizations such as eddy kinetic energy, eddy potential energy, or isopycnal slope. Ocean eddy parameterizations should consider metrics specific to the growth of baroclinic instability to accurately model eddy upwelling near topography.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Beryllium–tungsten graded density inner shells in double shell capsules for improved hydrodynamic stability

The outer surface of the high-Z inner shell in the double shell configuration of inertial confinement fusion experiments experiences Rayleigh–Taylor instability growth during the implosion process due to inverted density and pressure gradients between a highly compressed foam interstitial layer and the accelerating dense inner shell. Graded density layers have long been known to reduce instability growth rates. In this study, we employ high-fidelity radiation hydrodynamic simulations to demonstrate this improved stability when grading beryllium into tungsten. We first characterize the response to L-band preheat of these layers using a newly calibrated radiation drive. While graded layer capsules suffer reduced performance (here, measured as DD neutron yield from a CD foam fuel) in 1D simulations due to reduced kinetic energy coupling and reduced fuel compression, they suffer less of a performance drop when 2D instabilities are accounted for. With the improved stability of graded layers, we explore the performance of capsules with larger fuel radii and thinner shells as a preliminary study to find new designs in which graded layers produce the highest yields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Numerical investigation of the influence of shear and thermal stratification on the wind turbine tip‐vortex stability

Summary The interaction between wind turbine wakes and atmospheric turbulence is characterised by complex dynamics. In this study, two major components of the atmospheric boundary layer dynamics have been isolated, namely, the mean velocity profile shear and the thermal stratification, to examine their impact on the near‐wake development by undertaking a series of highly resolved large‐eddy simulations. Subsequently, instantaneous flow fields are extracted from the simulations and used to conduct Fourier analysis and proper orthogonal decomposition (POD) and compute the mean kinetic energy fluxes by different POD modes to better understand the tip‐vortex instability mechanisms. Our findings indicate that shear can significantly affect the breakup of the wind turbine tip‐vortices and the shape and stable length of the wake, whereas thermal stratification seems to only have limited contribution to the spatial development of the near‐wake field. Finally, our analysis shows that the applied perturbation frequency determines the tip‐vortex breakup location as it controls the onset of the mutual inductance instability.

17 WIND ENERGY↗
DOE OSTI2022

Cross-beam energy transfer in direct-drive ICF. I. Nonlinear and kinetic effects

Results are presented from a series of simulations examining the susceptibility of the cross-beam energy transfer (CBET) instability to nonlinear processes in the context of direct-drive inertial confinement fusion experiments on the OMEGA laser facility. These form the basis for the second paper of this series [A. G. Seaton, L. Yin, R. Follett, B. J. Albright, and A. Le, “Cross-beam energy transfer in direct-drive ICF. II. Theory and simulation of mitigation through increased laser bandwidth,” Phys. Plasmas 29, 042707 (2022)], where we examine the efficacy of increases in laser bandwidth at suppressing CBET. We choose laser and plasma conditions for the simulations that are favorable to CBET and promote nonlinearity. Through a comparison of outputs from the particle-in-cell code vector particle in cell (VPIC) and the linearized fluid code laser-plasma simulation environment (LPSE), a series of nonlinear effects have been identified in the kinetic simulations that include particle trapping, the two-ion wave decay, and ion-acoustic wave self-focusing. These effects produce time-dependent energy transfer, in contrast to the linearized fluid simulations in which a steady state is reached after an initial transient. Ion trapping is shown to allow for increased energy transfer relative to fluid simulations, with the remaining nonlinear processes acting to reduce the energy transfer. Nonlinear dynamics is contrasted for low- and high-intensity beams as well as between speckled and planar beams. For the parameters under consideration, beam profile has a significant effect on nonlinear dynamics, though the greatest sensitivity is to beam intensity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Plasma thermal-chemical instability of low-temperature dimethyl ether oxidation in a nanosecond-pulsed dielectric barrier discharge

Plasma stability in reactive mixtures is critical for various applications from plasma-assisted combustion to gas conversion. To generate stable and uniform plasmas and control the transition towards filamentation, the underlying physics and chemistry need a further look. Here, this work investigates the plasma thermal-chemical instability triggered by dimethyl-ether (DME) low-temperature oxidation in a repetitive nanosecond pulsed dielectric barrier discharge. First, a plasma-combustion kinetic mechanism of DME/air is developed and validated using temperature and ignition delay time measurements in quasi-uniform plasmas. Then the multi-stage dynamics of thermal-chemical instability is experimentally explored: the DME/air discharge was initially uniform, then contracted to filaments, and finally became uniform again before ignition. By performing chemistry modeling and analyzing the local thermal balance, it is found that such nonlinear development of the thermal-chemical instability is controlled by the competition between plasma-enhanced low-temperature heat release and the increasing thermal diffusion at higher temperature. Further thermal-chemical mode analysis identifies the chemical origin of this instability as DME low-temperature chemistry. This work connects experiment measurements with theoretical analysis of plasma thermal-chemical instability and sheds light on future chemical control of the plasma uniformity.

repetitive nanosecond pulses↗
DOE OSTI2021

Dynamics and energy coupling of gas puff Z-pinches on a fast linear transformer driver

Gas puff Z-pinch experiments with annular Ar and Ne gas shells have been conducted on the Compact Experimental System for Z-pinch and Ablation Research (CESZAR) linear transformer driver (LTD) with 500 kA current and 160 ns rise time. Here, we present results from the first systematic gas puff Z-pinch experiments using a fast (≤ 200 ns) LTD as a driver, in which we show that 7% of the stored energy in the capacitors is coupled to plasma kinetic energy as estimated via self-emission and laser schlieren images. 0D and 1D simulations—which do not allow instability growth and thus reach greater maximum average velocities—using initial conditions inferred from experimental implosion trajectories predict coupling in excess of 10% of the stored energy. Additionally, the Ar and Ne implosions were comparably massed and thus achieved similar maximum kinetic energies, though the Ne pinches were more stable and the x-ray pulses were longer and produced higher yield: 2–5 ns and 0.21–0.52 J (0.15–0.37 J/cm) of Ar K-shell and 12–25 ns and 2.2–3.9 J (1.6–2.6 J/cm) of Ne K-shell, respectively. The difference in stability is most likely attributed to variations in initial conditions such as density distribution and gas breakdown initiation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Compressible Rayleigh–Taylor instability subject to isochoric initial background state

The effect of compressibility on the single-mode Rayleigh–Taylor instability is examined using two (2D) and three-dimensional (3D) direct numerical simulations. To isolate compressibility from background stratification effects, this work employs a constant density profile on each side of the interface. The numerical simulations are performed at various Reynolds numbers using the gas kinetic method for static Mach numbers up to M = 0.4. The most important finding is that compressibility acting in isolation enhances the instability and perturbations grows faster with increasing Mach number, unlike previous results with background isothermal state, which show suppression of the instability at higher static Mach numbers. In addition, compressibility is also shown to increase the bubble-spike asymmetry. While the instability grows faster for the 3D case, the findings are qualitatively similar in 2D and 3D. Furthermore, the dynamical reasons underlying the effect of compressibility are elucidated by examining the evolution of vorticity and turbulent kinetic energy transport equations.

42 ENGINEERING↗
DOE OSTI2024

Latched detection of zeptojoule spin echoes with a kinetic inductance parametric oscillator

When strongly pumped at twice their resonant frequency, nonlinear resonators develop a high-amplitude intracavity field, a phenomenon known as parametric self-oscillations. The boundary over which this instability occurs can be extremely sharp and thereby presents an opportunity for realizing a detector. Here, we operate such a device based on a superconducting microwave resonator whose nonlinearity is engineered from kinetic inductance. The device indicates the absorption of low-power microwave wavepackets by transitioning to a self-oscillating state. Using calibrated pulses, we measure the detection efficiency to zeptojoule energy wavepackets. We then apply it to measurements of electron spin resonance, using an ensemble of 209 Bi donors in silicon that are inductively coupled to the resonator. We achieve a latched readout of the spin signal with an amplitude that is five hundred times greater than the underlying spin echoes.

42 ENGINEERING↗
DOE OSTI2020

Measurement of Ehrlich-Schwoebel barrier contribution to the self-organized formation of ordered surface patterns on Ge(001)

Normal-incidence 1-keV Ar + ion bombardment leads to amorphization and ultrasmoothing of Ge at room temperature, but at elevated temperatures the Ge surface remains crystalline and is unstable to the formation of self-organized nanoscale patterns of ordered pyramid-shaped pits. The physical phenomenon distinguishing the high-temperature patterning from room-temperature ultrasmoothing is believed to be a surface instability due to the Ehrlich-Schwoebel barrier for diffusing vacancies and adatoms, which is not present on the amorphous material. This real-time grazing-incidence small-angle x-ray scattering study compares smoothing of a prepatterned Ge sample at room temperature with patterning of an initially flat Ge sample at an elevated temperature. In both experiments, when the nanoscale structures are relatively small in height, the average kinetics can be explained by a linear theory. Furthermore, the linear theory coefficients, indicating surface stability or instability, were extracted for both experiments. A comparison between the two measurements allows estimation of the contribution of the Ehrlich-Schwoebel barrier to the self-organized formation of ordered nanoscale patterns on crystalline Ge surfaces.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Approximating the particle distribution in rotating and tandem mirror traps

Steady-state distribution functions can be used to calculate stability conditions for modes, radiation energy losses and particle loss rates. Heuristic analytic approximations to these distributions can capture key behaviors of the true distributions such as the relative speeds of different transport processes while possessing computational advantages over their numerical counterparts. In this paper, we motivate and present a closed-form analytic model for a distribution of particles in a centrifugal or tandem mirror. We find that our model outperforms other known models in approximating numerical steady-state simulations outside of a narrow range of low confining potentials. We demonstrate the model’s suitability in the high confining potential regime for applications such as loss-cone stability thresholds, fusion yields and available energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Nanoscopic strain evolution in single-crystal battery positive electrodes

Single-crystal Ni-rich layered oxides (SC-NMC) with a grain-boundary-free configuration have effectively addressed the long-standing cracking issue of conventional polycrystalline Ni-rich materials (PC-NMC) in lithium-ion batteries, prompting a shift in optimization strategies. However, continued reliance on anisotropic lattice volume change—a well-established failure indicator in PC-NMC—as a metric for understanding strain and guiding compositional design for SC-NMC becomes controversial. Here, in this study, by leveraging multiscale diagnostic techniques, we unravelled the distinct nanoscopic strain evolution in SC-NMC during battery operation, challenging the conventional composition-driven strategies and mechanical degradation indicators used for PC-NMC. Through particle-level chemomechanical analysis, we reveal a decoupling between mechanical stability and lattice volume change in SC-NMC, identifying that structural instability in SC materials is primarily driven by multidimensional lattice distortions induced by kinetics-driven reaction heterogeneity and progressively deactivating chemical phases. Using this mechanical failure mode, we redefine the roles of cobalt and manganese in maintaining mechanical stability. Unlike cobalt’s detrimental role in PC-NMC, we find cobalt to be critical in enhancing the longevity of SC-NMC by mitigating localized strain along the extended diffusion pathway, whereas manganese exacerbates mechanical degradation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Implications of Shear and Thermal Stratification on Wind Turbine Tip-Vortex Stability

The interaction between wind turbines in a wind farm through their wakes is a phenomenon that has been studied for decades and is still relevant today. Turbines clustered together in arrays will often operate in the wake of other upstream turbines which may lead to significant power losses and fatigue loads. For modern large-scale wind turbines, the mean shear velocity profile and thermal stratification are major components of the atmospheric boundary layer so it is important to understand their impact on near-wake development. Additionally, veer is present due to the rotation of the Earth. The impact of shear, thermal stratification and veer on the stable wake length of turbines with a dynamic control strategy is studied numerically in this work using a suite of highly resolved large-eddy simulations. Instantaneous flow fields are extracted from the simulations and used to conduct proper orthogonal decomposition (POD) and compute the mean kinetic energy fluxes by different POD modes to better understand the tip-vortex instability mechanisms. Our findings show that the dynamic pitch control scheme is able to shorten the stable wake length to about 1.5R in uniform flow. Shear can significantly affect the break up of wind turbine tip-vortices as well as the shape and stable length of the wake, whereas thermal stratification seems to only have limited contribution to the spatial development of the near-wake field. Veer causes the wake boundary to skew but has a limited impact on the wake length.

length thermal stratification↗
DOE OSTI2020

Final Report for Tech-X Corporations’s contribution to Enhancing Understanding of High Energy Density Plasmas from Wire Array and Solid Liner Implosions Using Fluid Modeling with Kinetic Closures

Recent results from experiments and simulation of magnetically driven pulsed power liners have explored the role of the early-time electrothermal instability in the evolution of the magneto-Rayleigh-Taylor instability. Our focus will be on understanding the development of such instabilities and the potential stabilization mechanisms via electron thermal conduction, viscosity, and large magnetic fields which we expect could play a significant role in supporting the success of the MagLIF program. Experiments have shown that studies of high-energy density plasmas from wire-array implosions require physics modeling that goes well beyond simple models such as ideal magnetohydrodynamics. The goal of this work is to provide increased understanding of these experiments by employing simulations with a multi-fluid extended-MHD model which uses kinetic closures for thermal conduction, resistivity and viscosity. We will use codes easily available to the wider research community, including university students, with a secondary goal of providing the community with well-benchmarked tools capable of advanced modeling of high-energy-density plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Do ambient shear and thermal stratification impact wind turbine tip-vortex breakdown?

Modern wind turbines experience uneven inflow conditions across the rotor, due to the ambient flow’s shear and thermal stratification. Such conditions alter the shape and length of turbine wakes and thus impact the loads and power generation of downstream turbines. To this end, understanding the spatial evolution of the individual wakes under different atmospheric conditions is key to controlling and optimising turbine arrays. With this numerical study we aim to obtain a better understanding of the fundamental physics governing the near-wake dynamics of wind turbines under shear and thermal stability, by examining their tip-vortex breakup mechanisms. Our approach considers scale-resolving simulations of a single turbine wake under a linear shear profile as well as the application of harmonic tip perturbations to trigger flow instabilities. For the subsequent analysis we use the proper orthogonal decomposition (POD) method to extract coherent structures from the flow, and we also calculate mean kinetic energy fluxes to quantify each coherent structure’s contribution to wake recovery. The wake’s helical spiral is found to hinder wake recovery for all studied ambient flow conditions, whereas the mutual inductance instability has positive MKE flux leading to an enhanced wake recovery. Finally, the ambient shear has the largest impact on the local MKE flux with respect to downstream location by changing the shape of the curve and location of extrema, whereas thermal stratification has only a minimal impact on the magnitude of the near-wake local MKE flux distribution.

17 WIND ENERGY↗
DOE OSTI2023

Boosting Hydrogen Evolution in Neutral Medium by Accelerating Water Dissociation with Ru Clusters Loaded on Mo 2 CTx MXene

Abstract Electrocatalytic hydrogen evolution reaction (HER) in mild neutral medium is a compelling goal for environmentally sustainable energy conversion, but its development is greatly limited by slow kinetics. Platinum group noble metals exhibit ultra‐high HER activities, but their scarcity and performance instability restrict wide application. Herein, taking advantage of excellent catalyst carrier properties of 2D‐layered transition metal carbides (MXenes), highly dispersed of Ru clusters anchored on Mo 2 CT x MXene are demonstrated as a superior HER electrocatalyst, which is prepared by a facile in situ reduction strategy. The as‐prepared Ru/Mo 2 CT x catalyst exhibits a very low overpotential of 73 mV to achieve a current density of −10 mA cm −2 and Tafel slope of 57 mV dec −1 in neutral medium, surpassing performance of most previously reported MXene‐based catalysts. In addition, Ru/Mo 2 CT x catalyst also presents superior stability compared to commercial Pt/C. Experimental results and theoretical calculations indicate that the interaction between Ru clusters modulates the electronic structure of active sites and promotes H 2 O dissociation and hydrogen desorption.

Wu, Yanze↗