Search NASA⌕ Search

SEARCH · Search NASA

Results for “lighter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

A preliminary design study of a laminar flow control wing of composite materials for long range transport aircraft

The results of an aircraft wing design study are reported. The selected study airplane configuration is defined. The suction surface, ducting, and compressor systems are described. Techniques of manufacturing suction surfaces are identified and discussed. A wing box of graphite/epoxy composite is defined. Leading and trailing edge structures of composite construction are described. Control surfaces, engine installation, and landing gear are illustrated and discussed. The preliminary wing design is appraised from the standpoint of manufacturing, weight, operations, and durability. It is concluded that a practical laminar flow control (LFC) wing of composite material can be built, and that such a wing will be lighter than an equivalent metal wing. As a result, a program of suction surface evaluation and other studies of configuration, aerodynamics, structural design and manufacturing, and suction systems are recommended.

Swinford, G. R.↗
NASA NTRS1976

Cargo transportation by airships: A systems study

A systems engineering study of a lighter than air airship transportation system was conducted. The feasibility of the use of airships in hauling cargo was demonstrated. Social, legal, environmental and political factors were considered as well as the technical factors necessary to design an effective airship transportation system. In order to accomplish an effective airship transportation program two phases of implementation were recommended. Phase I would involve a fleet of rigid airships of 3.5 million cubic feet displacement capable of carrying 25 tons of cargo internal to the helium-filled gas bag. The Phase I fleet would demonstrate the economic and technical feasibility of modern-day airships while providing a training capability for the construction and operation of larger airships. The Phase II portion would be a fleet of rigid airships of 12 million cubic feet displacement capable of carrying a cargo of 100 tons a distance of 2,000 miles at a cruising speed of 60 mph. An economic analysis is given for a variety of missions for both Phase I and Phase II airships.

Huang, C. J.↗
NASA NTRS1976

Space shuttle engineering and operations support. Isolation between the S-band quad antenna and the S-band payload antenna. Engineering systems analysis

The isolation between the upper S-band quad antenna and the S-band payload antenna on the shuttle orbiter is calculated using a combination of plane surface and curved surface theories along with worst case values. A minimum value of 60 db isolation is predicted based on recent antenna pattern data, antenna locations on the orbiter, curvature effects, dielectric covering effects and edge effects of the payload bay. The calculated value of 60 db is significantly greater than the baseline value of 40 db. Use of the new value will result in the design of smaller, lighter weight and less expensive filters for S-band transponder and the S-band payload interrogator.

Lindsey, J. F.↗
NASA NTRS1975

Mass fractionation of the lunar surface by solar wind sputtering

The sputtering of the lunar surface by the solar wind is examined as a possible mechanism of mass fractionation. Simple arguments based on current theories of sputtering and the ballistics of the sputtered atoms suggest that most ejected atoms will have sufficiently high energy to escape lunar gravity. However, the fraction of atoms which falls back to the surface is enriched in the heavier atomic components relative to the lighter ones. This material is incorporated into the heavily radiation-damaged outer surfaces of grains where it is subject to resputtering. Over the course of several hundred years an equilibrium surface layer, enriched in heavier atoms, is found to form. The dependence of the calculated results upon the sputtering rate and on the details of the energy spectrum of sputtered particles is investigated. It is concluded that mass fractionation by solar wind sputtering is likely to be an important phenomenon on the lunar surface.

Switkowski, Z. E.↗
NASA NTRS1975

Evaluation of all-parachute and hybrid /parachute-retrorocket/ recovery systems for a one-million-pound booster

Both an all-parachute recovery system and a hybrid parachute-retrorocket recovery system for a one-million-pound booster are evaluated in order to determine what parachute sizes and number in a cluster are required for an all-parachute system to provide impact velocities of less than 100 ft/sec and in order to determine whether the hybrid system permits a weight reduction over an all-parachute system. A minimum-weight hybrid decelerator system using Kevlar materials for a cluster of three parachutes with two stages of reefing is analyzed. Major conclusions are that for an impact velocity of less than 100 ft/sec the hybrid decelerator system is lighter in weight, and that the use of Kevlar rather than Nylon material results in hybrid decelerator system weight savings of over 40% for impact velocities in the range 60-30 ft/sec.

Eckstrom, C. V.↗
NASA NTRS1976

Study of two axisymmetric inlets designed for Mach 3.5

Results from wind-tunnel tests of two large-scale models of axisymmetric mixed-compression inlet systems designed for Mach number 3.5 are compared. One inlet incorporated a 'traveling'-bleed system in an effort to achieve maximum transonic engine airflow supply. The other inlet required only a 'fixed'-bleed system, but had 21 percent less transonic airflow supply. The inlet with fixed bleed appears more attractive, if auxiliary airflow systems are used to increase the transonic airflow supply, because it can be 45 percent shorter and would be considerably lighter than the traveling-bleed inlet. In addition, the fixed-bleed inlet offers more operating-control margin at supersonic Mach numbers when the inlet is started. Further, its off-design performance is higher because separation of the flow in the subsonic diffuser can be avoided - something that apparently cannot be done with a traveling-bleed inlet without reducing the transonic airflow supply. Finally, it appears that the management and efficiency of bleed airflow for the fixed-bleed inlet can be improved using analytical methods verified by the tests.

Sorensen, N. E.↗
NASA NTRS1976

Composition waves in the thermosphere

Neutral-composition waves excited by auroral heat sources are investigated. For horizontal wavelengths of the order of 1000 km, it is concluded that diffusion processes (1) play a significant role such that deviations from diffusive equilibrium prevail for He throughout the thermosphere; (2) produce phase differences of about 220 deg (or -140 deg) between He and N2, and (3) account for He amplitudes comparable to those of N2. These results basically explain recent AE-C satellite measurements which have revealed an anticorrelation between the heavier and lighter constituents of the thermosphere. The calculations also indicate that temperature and N2 concentration are generally out of phase by about 100 deg.

Mayr, H. G.↗
NASA NTRS1975

Fiber optic multiplexed optical transmission systems for space vehicle launch facilities

Low loss Fiber Optic Cable is being evaluated as a potential future replacement for Kennedy Space Center's 13,000 mile Wideband cable system. In order to make economical use of the wide bandwidth characteristic of glass fibers, a Frequency Division Multiplexing (FDM) scheme has been devised to stack many analog and digital data channels on a single fiber. The Multiplexed Optical Transmission System (MOTS) will offer a unique flexibility of plug-in modularity to meet changing data and bandwidth requirements in addition to the standard 'goodies' of immunity to lightning and other EMI, RFI type interferences, and of smaller size and lighter weight.

Bell, C. H.↗
NASA NTRS1976

Satellite measurements of ion composition and temperatures in the topside ionosphere during medium solar activity

Information on both ion density and temperature is obtained from analysis of Retarding Potential Analyzer data from the OGO-4 and Explorer-31 satellites. Results obtained from data in the altitude range of 700-2000 km during medium solar activity are presented. An attempt is made to describe the major altitude variations of ion densities and temperatures at middle and low latitudes. The transition heights, where the heavier and lighter ions are equal, are found to be about 1600 and 1300 km at middle and low latitudes, respectively, for daytime and 700 km at night for middle latitudes. Based on the observed data and using diffusive equilibrium as a first-order approximation, topside ionospheric composition models are given for medium solar activity.

Goel, M. K.↗
NASA NTRS1977

Extruded edge members for honeycombs

Edge members in bonded honeycomb panel structures are conventionally made by machining channels in aluminum bars. Open ends are stuffed with honeycomb core, using intumescent adhesive. Less expensive technique eliminates need for stuffing. Extended edges are more reliable, lighter, and easier to install. New manufacturing method may prove useful in fabricating structures such as air-frames, recreational-vehicle frame members, and the like in which weight savings is primary goal.

Haskell, D. R.↗
NASA NTRS1977

Changing sunlight to microwaves: A concept

Electromechanical device converts sunlight into microwave energy by direct process. Still in conceptual stage, device is expected to be lighter and more efficient (ninety percent conversion efficiency) than less-direct conversion systems that employ solar panels and magnetrons. Besides uses in satellites and spacecraft as microwave source, device has many terrestrial applications, including use in fuel-saving sun-powered microwave oven.

Dickinson, R. M.↗
NASA NTRS1977

Fireman's lamp

Rugged lamp used by miners is adapted for firefighters by utilization of smaller, rechargeable 3-hour-life gel-cell battery. Lighter, maintenance free unit can be clipped to outer clothing for convenience. Small monitor circuit indicates need to recharge battery.

Britz, W. J.↗
NASA NTRS1976

Research on the exploitation of advanced composite materials to lightly loaded structures

The objective was to create a sailplane which could fly in weaker thermals than present day sailplanes (by being lighter) and to fly in stronger thermals than present sailplanes (by carrying more water ballast). The research was to tackle the interaction of advanced composites and the aerodynamic performance, the interaction of fabrication procedures and the advanced composites, and the interaction of advanced composites and the design process. Many pieces of the overall system were investigated but none were carried to the resolution required for engineering application. Nonetheless, interesting and useful results were obtained and are here reported.

Mar, J. W.↗
NASA NTRS1976

Preliminary study of effects of winglets on wing flutter

Some experimental flutter results are presented over a Mach number range from about 0.70 to 0.95 for a simple, swept, tapered, flat-plate wing model having a planform representative of subsonic transport airplanes and for the same wing model equipped with two different upper surface winglets. Both winglets had the same planform and area (about 2 percent of the basic-wing area); however, one weighed about 0.3 percent of the basic-wing weight, and the other weighed about 1.8 percent of the wing weight. The addition of the lighter winglet reduced the wing-flutter dynamic pressure by about 3 percent; the heavier winglet reduced the wing-flutter dynamic pressure by about 12 percent. The experimental flutter results are compared at a Mach number of 0.80 with analytical flutter results obtained by using doublet-lattice and lifting-surface (kernel-function) unsteady aerodynamic theories.

Doggett, R. V., Jr.↗
NASA NTRS1976

Analytical structural efficiency studies of borsic/aluminum compression panels

Analytically determined mass-strength curves, strain-strength curves, and dimensions are presented for structurally efficient hat-stiffened panels, corrugation-stiffened panels, hat-stiffened honeycomb-core sandwich panels, open-section corrugation panels, and honeycomb-core sandwich panels. The panels were assumed to be fabricated from either titanium, borsic/aluminum, or a combination of these materials. Borsic/aluminum panels and titanium panels reinforced with borsic/aluminum were lighter and stiffer than comparably designed titanium panels. Reinforced titanium panels had the same extensional stiffness as comparably designed Borsic/aluminum panels. For a given load, the structural efficiency of the hat-stiffened honeycomb-core sandwich panel was higher than the structural efficiency of the other stiffened panels.

Mcwithey, R. R.↗
NASA NTRS1977

Oblique wing transonic transport configuration development

Studies of transport aircraft designed for boom-free supersonic flight show the variable sweep oblique wing to be the most efficient configuration for flight at low supersonic speeds. Use of this concept leads to a configuration that is lighter, quieter, and more fuel efficient than symmetric aircraft designed for the same mission. Aerodynamic structural, weight, aeroelastic and flight control studies show the oblique wing concept to be technically feasible. Investigations are reported for wing planform and thickness, pivot design and weight estimation, engine cycle (bypass ratio), and climb, descent and reserve fuel. Results are incorporated into a final configuration. Performance, weight, and balance characteristics are evaluated. Flight control requirements are reviewed, and areas in which further research is needed are identified.

Source record↗
NASA NTRS1976

Structural design studies of a supersonic cruise arrow wing configuration

Structural member cross sections were sized with a system of integrated computer programs to satisfy strength and flutter design requirements for several variants of the arrow wing supersonic cruise vehicle. The resulting structural weights provide a measure of the structural efficiency of the planform geometry, structural layout, type of construction, and type of material including composites. The material distribution was determined for a baseline metallic structure and the results indicate that an approximate fatigue constraint has an important effect on the structural weight required for strength but, in all cases, additional material had to be added to satisfy flutter requirements with lighter mass engines with minimum fuel onboard. The use of composite materials on the baseline configuration was explored and indicated increased structural efficiency. In the strength sizing, the all-composite construction provided a lower weight design than the hybrid construction which contained composites only in the wing cover skins. Subsequent flutter analyses indicated a corresponding lower flutter speed.

Sobieszczanski, J.↗