Search NASA⌕ Search

SEARCH · Search NASA

Results for “linear accelerator,”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Integral Field Probe for Mapping of Curved Magnets

The Single Stretched Wire (SSW) method allows highly precise integral field measurements by recording voltage across a tensioned wire mounted to 2-axis linear stages at either end of the magnet aperture. However, traditional SSW probes are not well suited for curved accelerator magnets, which are essential for steering charged particles along arced trajectories in storage rings or beamlines. The tension required to eliminate sag demands a purely straight path, making them incompatible with non-linear magnet geometries. To address this limitation for curved magnets, a modified approach was developed using a segmented, 3D-printed support structure that incorporates a pre-shaped anti-sag curve. Under its own weight and that of the wire bundle, the structure deforms to lie flat while conforming to the curvature of the magnet in the horizontal plane. The optimal geometry of the probe was derived using an iterative process combining FEA simulations in Ansys Mechanical with testing of various carbon fiber-reinforced filaments. The printed and assembled probe was successfully used to measure the SDD-059 magnet at Fermilab, yielding promising results.

Jakopin, Alexander [Northern Illinois U.]↗
DOE OSTI2025

Accelerating magnonic simulations with the pseudospectral Landau-Lifshitz equation

The pseudospectral Landau-Lifshitz (PS-LL) model can describe atomic-scale magnetic exchange interactions within a continuum framework. This is achieved by employing a convolution kernel that models the nonlocal interaction in a grid-independent manner. Even though the PS-LL was originally introduced to address atomic exchange, any nonlocal kernel can be modeled. In the field of magnonics, the dipole field is fundamental to describe the dispersion relation of magnons, the quasiparticle representation of angular momentum. Because dipole-dipole interactions are long-range, numerical approaches typically rely on convolutions. Here, we demonstrate that the PS-LL model can be used to perform magnonic simulations with a single convolution kernel derived from analytical solutions. We demonstrate a twofold increase in computational speed compared with the full dipole calculation. This approach is valid insofar as the excitations are linear, which is typically the case for magnons. Our results have the potential to accelerate magnonic research, particularly for the inverse design method, where several simulations must be performed to achieve the desired outcome.

Mathematics and computing↗
DOE OSTI2024

Linear Solvers for Collector Systems of Generalized Large-scale Inverter-Based Resources

Collector systems for inverter-based resources (IBRs) are typically represented by equivalent circuits for electromagnetic transient (EMT) simulations. Recent studies have revealed that modeling a detailed collector system is essential to accurately represent the behavior of IBRs, especially when dealing with partial tripping during external disturbances. However, there are several challenges in simulating a detailed EMT model of a collector system due to the time required to simulate such systems. Thus, this paper investigates the modeling of a detailed collector system, taking into account its configuration and components as defined in IEEE standard 2800. The configurations include the collector systems of generalized large-scale IBR plants. The components include the main IBR transformer, collector bus, and feeders with lines and/or cables. The EMT model of the collector system is represented by differential algebraic equations (DAEs) that are discretized to form linear equations that are solved using linear solvers. In this paper, linear solvers are proposed based on the Schur complement method, which are utilized for simulation of the EMT model of collector systems of generalized large-scale IBRs to accelerate simulation speed while maintaining the accuracy of the results. The proposed solvers are verified by comparing the performance to that of linear solvers provided in MATLAB.

Choi, Jongchan↗
DOE OSTI2024

RF Frontiers for Particle Physics, the US View

In this talk I provide an update on the RF research for future colliders in the U.S., through the prism of Snowmass and P5 report. During Snowmass, we considered various applications of RF technology to the proposed future colliders and other accelerator- and non-accelerator-based experiments. P5 narrowed down the choices of future machines. The colliders include circular and linear $e^+ e^-$ Higgs factories, and longer-term options such as muon and hadron high energy colliders. I will start with Snowmass and P5 recommendations. As it is impossible to cover all possible RF R&D topics, I will discuss only three critical topics relevant to future colliders: efficiency of RF power sources, cold normal conducting RF, and cavities for ionization channel of muon collider. Progress on SRF accelerating cavities for future colliders will be covered in a separate talk. The choice of topics reflects my preference and in some cases ignorance, which I think is inevitable when one tries to cover such a broad subject.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Predicting non-linear stress–strain response of mesostructured cellular materials using supervised autoencoder

Recent breakthroughs in advanced manufacturing capabilities have made it possible to design and print sophisticated topologies of cellular structures using diverse engineering materials such as metals, polymers, and ceramics. In these architectured materials, it is often desirable to tailor the mechanical properties by altering the unit cell topology. This necessitates an in-depth understanding of how the topology of the unit cell structure affects the macroscopic behavior of the material in both the linear and the non-linear regimes encountered under large compression. Here, we have developed a machine learning (ML) approach capable of accelerating the prediction of the stress–strain response of a polymer-based cellular structure under uniaxial confined compression. As part of generating the training data for ML, 60,000 mesostructures were generated using a relatively novel approach based on cellular automata, and their corresponding stress–strain responses were obtained from the finite element simulations. Principal component analysis (PCA) was used to reduce the dimensionality of the stress–strain curves. With only 20 principal components, PCA captured 99.89% of the variance in the stress–strain curves while reducing the dimensionality by 5X. ML using supervised autoencoder was able to successfully speed up the prediction of the non-linear stress–strain response of a unit cell by up to 4600X. The proposed method can serve as an efficient data generation tool and a rapid means for predicting the structure–property relationship through accelerated forward modeling of cellular materials under compaction, in cases where the macroscopic stress–strain response is governed by the unit-cell topology.

36 MATERIALS SCIENCE↗
DOE OSTI2026

A linear collider vision for the future of particle physics

In this paper we review the physics opportunities at linear e + e - colliders with a special focus on high centre-of-mass energies and beam polarisation, take a fresh look at the various accelerator technologies available or under development and, for the first time, discuss how a facility first equipped with a technology that is mature today could be upgraded with technologies of tomorrow to reach much higher energies and/or luminosities. In addition, we discuss detectors, alternative collider modes, as well as opportunities for beyond-collider experiments and R&D facilities as part of a linear collider facility (LCF). The material of this paper supports all plans for e + e - linear colliders and the additional opportunities they offer, independently of technology choice or proposed site, as well as R&D for advanced accelerator technologies. This joint perspective on the physics goals, early technologies and upgrade strategies has been developed by the LCVision team based on an initial discussion at LCWS2024 in Tokyo and a follow-up at the LCVision Community Event at CERN in January 2025. It heavily builds on decades of achievements of the global linear collider community, in particular in the context of CLIC and ILC.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

The temporal onset of associations of cortical proteins with cognitive resilience vary during late life

Background: Cortical proteins associated with cognitive resilience have been identified but their temporal onset in older adults is unknown. We present a multistage approach to first identify cortical proteins associated with cognitive resilience and then examine their associated temporal onset. Methods: We used data from a subset of 1088 decedents from two cohort-studies who had selected reaction monitoring proteomics from the dorsolateral prefrontal cortex, and at least 3 cognitive assessments. Cognition was assessed using a composite derived from 19 tests. We first used linear mixed-effects models to identify cortical proteins associated with cognitive resilience. We then used functional mixed-effects models to examine non-linear associations between proteins and cognitive resilience to identify their temporal onset. Results: Mean age at death was 90 years (SD = 6.4); 69 % were female. On average, cognition started to decline at around 15 years before death, with accelerated decline in the last 7 years. We identified 40 proteins associated with cognitive resilience, of which 17 proteins also showed non-linear associations. Non-linear associations indicated that higher levels of 10 proteins were associated with slower cognitive decline between 23 and 4 years before death. In contrast, higher levels of 7 proteins were associated with faster decline only within the last 7 years before death. Conclusions: Cognitive resilience proteins are differentially related to late-life cognitive aging; the onset of proteins that maintain cognition may begin many years before the onset of proteins that hasten cognitive decline. The temporal onset of cognitive resilience proteins may be crucial for timing efficacious interventions.

Zammit, Andrea↗
DOE OSTI2026

SAIGE-GPU: accelerating genome- and phenome-wide association studies using GPUs

Genome-wide association studies (GWAS) at biobank scale are computationally intensive, especially for admixed populations requiring robust statistical models. SAIGE is a widely used method for generalized linear mixed-model GWAS but is limited by its CPU-based implementation, making phenome-wide association studies impractical for many research groups. We developed SAIGE-GPU, a GPU-accelerated version of SAIGE that replaces CPU-intensive matrix operations with GPU-optimized kernels. The core innovation is distributing genetic relationship matrix calculations across GPUs and communication layers. Applied to 2068 phenotypes from 635 969 participants in the Million Veteran Program, including diverse and admixed populations, SAIGE-GPU achieved a 5-fold speedup in mixed model fitting on supercomputing infrastructure and cloud platforms. We further optimized the variant association testing step through multi-core and multi-trait parallelization. Deployed on Google Cloud Platform and Azure, the method provided substantial cost and time savings. Source code and binaries are available for download at https://github.com/saigegit/SAIGE/tree/SAIGE-GPU-1.3.3. A code snapshot is archived at Zenodo for reproducibility (DOI: [10.5281/zenodo.17642591]). SAIGE-GPU is available in a containerized format for use across HPC and cloud environments and is implemented in R/C++ and runs on Linux systems.

Rodriguez, Alex [Argonne National Laboratory (ANL)↗
DOE OSTI2024

A Performance and Energy Study of GPU-Resident Preconditioners for Conjugate Gradient Solvers: In the Context of Existing and Novel Approaches

Optimizing a particular subprogram out of the set of Basic (sparse) Linear Algebra Subprograms (BLAS) for a given architecture is a common topic of research. In applications, however, these BLAS functions rarely appear in isolation; usually, many of them are used together, in various combinations and with varying inputs. As the need to solve a large, sparse linear system is ubiquitous throughout HPC applications, linear solvers constitute a realistic, sufficiently complex and well-defined representative use case for composite BLAS routines. To this end, based on a representative set of matrices drawn from a diverse set of fields, we present a framework to study, from the performance and energy perspective, the efficacy of GPU- resident parallel Conjugate Gradient (CG) linear solver with different preconditioner options, including Gauss-Seidel, Jacobi, and incomplete Cholesky. We also propose a novel GPU-based preconditioner, in which the triangular solves are approximated by an iterative process. The development of this preconditioner was motivated by solving large graph Laplacian linear systems, for which the existing preconditioners either perform slow on GPU-based platforms or are not applicable. We compare the performance of these preconditioners on different hardware accelerator architectures, i.e., AMD MI250X, MI100, Nvidia A100, V100, and Jetson. Our experiments reveal performance trade-offs and provide information on how to select the best strategy for the given linear system, dictated by its properties, and the platform of interest. We demonstrate the application of our novel preconditioner for solving CG and graph Laplacian systems. Overall, the framework can be utilized as a benchmark to guide informed decisions in choosing a specific preconditioner, i.e., whether it is better to rely on the performance of a triangular solver or on the performance of sparse matrix-vector product. Finally, by considering power consumption to solve the linear systems, we report the energy footprint for the solvers.

Preconditioned Conjugate Gradient, GPUs, iterative↗
DOE OSTI2024

Threshold charmonium photoproduction with GlueX

We report the total and differential cross sections for J/ψ photoproduction obtained using the large acceptance GlueX spectrometer at the 12 GeV JLab accelerator over the full near-threshold kinematic region. The GlueX experiment uses tagged linearly-polarized photon beam from coherent Bremsstrahlung off a thin diamond. Charmonium photoproduction near threshold, under certain assumptions including gluon exchange and factorization, can be used to study important aspects of the gluon structure of the proton, such as the gluon GPD, the gravitational form factors, the mass radius of the proton, and the anomalous contribution to the proton mass. In the measured cross sections we find evidence for possible contributions beyond gluon exchange. The results are compared to a wide range of theoretical predictions including GPD calculations and models with open-charm intermediate states. Photoproduction near threshold of charmonium states with opposite-to-photon parity offer another opportunity, complementary to the J/ψ, to understand the reaction mechanism of the charmonium photoproduction. While we see some evidence for such states, comprehensive studies of such higher-mass charmonia can be done only with the proposed JLab energy upgrade. An electron beam energy of up to 22 GeV significantly increases the photon flux and polarization in the corresponding threshold regions allowing for precise cross section and polarization measurements there.

Pentchev, Lubomir↗
DOE OSTI2024

Initial PIP-II Beam Current Monitor Fault Case Analyses & Beam Position Monitor Linearity Studies in CST Studio Suite

The use of non-invasive sensors & systems to measure particle beam characteristics is a crucial part of modern accelerator control systems due to their ability to return real time beam data while minimizing negative effects on beam quality. To ensure that one can be reasonably confident these sensors will behave as desired upon be-ing implemented within the beamline, simulations pre-dicting the performance of these sensors under beamline conditions can be used as a valuable tool for checking sensor functionality without a physical test bench. This paper details the design, testing, and results of two sensor models developed using CST Studio Suite soft-ware designed to mimic two sensors to be implemented within the PIP-III beamline: an elliptical, large-aperture beam position monitor (BPM) for which vertical & hori-zontal position signal linearity was analyzed, and an AC current transformer (ACCT) beam current monitor (BCM) used to search for potential fault cases within the BCM and beam pipe flange gaps. Special focus is given to the discovery of linearity variations within the BPM and the use of frequency domain techniques in the BCM fault case analyses.

Rouzky, A. R.↗
DOE OSTI2025

Leveraging operator learning to accelerate convergence of the preconditioned conjugate gradient method

We propose a new deflation strategy to accelerate the convergence of the preconditioned conjugate gradient (PCG) method for solving parametric large-scale linear systems of equations. Unlike traditional deflation techniques that rely on eigenvector approximations or recycled Krylov subspaces, we generate the deflation subspaces using operator learning, specifically the Deep Operator Network (DeepONet). To this aim, we introduce two complementary approaches for assembling the deflation operators. The first approach approximates near-null space vectors of the discrete PDE operator using the basis functions learned by the DeepONet. The second approach directly leverages solutions predicted by the DeepONet. To further enhance convergence, we also propose several strategies for prescribing the sparsity pattern of the deflation operator. Here, a comprehensive set of numerical experiments encompassing steady-state, time-dependent, scalar, and vector-valued problems posed on both structured and unstructured geometries is presented and demonstrates the effectiveness of the proposed DeepONet-based deflated PCG method, as well as its generalization across a wide range of model parameters and problem resolutions.

Deflation↗
DOE OSTI2025

Analysis of the Blowout Plasma Wakefields Produced by Drive Beams with Elliptical Symmetry

In the underdense, or blowout regime, of plasma wakefield acceleration, the particle beam is denser than the plasma. In this scenario, the plasma electrons are nearly completely rarefied from the beam channel, leaving only a nominally uniform ion-filled “bubble.” Extensive investigations of this interaction assuming axisymmetry have been undertaken. However, the blowout produced by a transversely asymmetric (flat) driver, which would be present in linear collider “afterburner” schemes, possesses quite different characteristics. Such beams create an asymmetric plasma bubble which leads to unequal focusing in the two transverse dimensions, accompanied by a nonuniform accelerating gradient. The asymmetric blowout cross section is found through simulation to be elliptical, and treating it as such permits a simple extension of the symmetric theory. In particular, focusing fields linear in both transverse directions inside the bubble are found. The form of the wake potential and the associated beam-matching conditions in this elliptical cavity are discussed. Here, we also examine blowout boundary estimation in the long driver limit and applications of the salient asymmetric features of the wakefield.

Manwani, P. [University of California, Los Angeles↗
DOE OSTI2025

Evaluation of data driven low-rank matrix factorization for accelerated solutions of the Vlasov equation

Low-rank methods have shown success in accelerating simulations of a collisionless plasma described by the Vlasov equation, but still rely on computationally costly linear algebra every time step. We propose a data-driven factorization method using artificial neural networks, specifically with convolutional layer architecture, that trains on existing simulation data. At inference time, the model outputs a low-rank decomposition of the distribution field of the charged particles, and we demonstrate that this step is faster than the standard linear algebra technique. Numerical experiments show that the method achieves comparable reconstruction accuracy for interpolation tasks, generalizing to unseen test data in a manner beyond just memorizing training data; patterns in factorization also inherently followed the same numerical trend as those within algebraic methods (e.g., truncated singular-value decomposition). However, when training on the first 70% of a time-series data and testing on the remaining 30%, the method fails to meaningfully extrapolate. Despite this limiting result, the technique may have benefits for simulations in a statistical steady-state or otherwise showing temporal stability. These results suggest that while the model offers a computationally efficient alternative for datasets with temporal stability, its current formulation is best suited for interpolation rather than for predicting future states in time-evolving systems. This study thus lays the groundwork for further refinement of neural network-based approaches to low-rank matrix factorization in high-dimensional plasma simulations.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Proton Dynamics Scenarios in the Integrable Optics Test Accelerator (IOTA) at Fermilab

The Integrable Optics Test Accelerator (IOTA) at Fermilab provides a versatile platform for studying the interplay of space-charge, impedance, and non-linear optics in high-intensity hadron beams within synchrotrons and storage rings. This report examines the parameters and dynamics of 2.5~MeV proton beam operations in two configurations of the bare IOTA lattice: one for demonstrating Non-linear Integrable Optics with the Danilov-Nagaitsev magnet, and the other for use with electron cooling. We offer order-of-magnitude estimates of the transverse emittance growth rate as a function of beam intensity, highlighting contributions from residual gas scattering, intra-beam scattering, and space-charge effects. Under nominal conditions, the beam lifetime is projected to be less than 7~minutes at low intensity with the current vacuum quality, and fewer than 100,000~turns at high intensity due to strong space-charge effects. The calculations presented here will guide strategies to mitigate emittance growth and inform future IOTA experiments.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

A multifrequency study of sub-parsec jets with the Event Horizon Telescope

Context. The 2017 observing campaign of the Event Horizon Telescope (EHT) delivered the first very long baseline interferometry (VLBI) images at the observing frequency of 230 GHz, leading to a number of unique studies on black holes and relativistic jets from active galactic nuclei (AGN). In total, eighteen sources were observed, including the main science targets, Sgr A* and M 87, and various calibrators. Sixteen sources were AGN.Aims. We investigated the morphology of the sixteen AGN in the EHT 2017 data set, focusing on the properties of the VLBI cores: size, flux density, and brightness temperature. We studied their dependence on the observing frequency in order to compare it with the Blandford-Königl (BK) jet model. In particular, we aimed to study the signatures of jet acceleration and magnetic energy conversion.Methods. We modeled the source structure of seven AGN in the EHT 2017 data set using linearly polarized circular Gaussian components (1749+096, 1055+018, BL Lac, J0132–1654, J0006–0623, CTA 102, and 3C 454.3) and collected results for the other nine AGN from dedicated EHT publications, complemented by lower frequency data in the 2–86 GHz range. Combining these data into a multifrequency EHT+ data set, we studied the dependences of the VLBI core component flux density, size, and brightness temperature on the frequency measured in the AGN host frame (and hence on the distance from the central black hole), characterizing them with power law fits. We compared the observations with the BK jet model and estimated the magnetic field strength dependence on the distance from the central black hole.Results. Our observations spanning event horizon to parsec scales indicate a deviation from the standard BK model, particularly in the decrease of the brightness temperature with the observing frequency. Only some of the discrepancies may be alleviated by tweaking the model parameters or the jet collimation profile. Either bulk acceleration of the jet material, energy transfer from the magnetic field to the particles, or both are required to explain the observations. For our sample, we estimate a general radial dependence of the Doppler factor δ ∝ r≤0.5. This interpretation is consistent with a magnetically accelerated sub-parsec jet. We also estimate a steep decrease of the magnetic field strength with radius B ∝ r−3, hinting at jet acceleration or efficient magnetic energy dissipation.Key words: techniques: interferometric / galaxies: active / galaxies: jets / galaxies: nuclei / quasars: general / quasars: supermassive black holes⋆⋆ Deceased.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Dedicated beam position monitor pair for model-independent lattice characterization at NSLS-II

This paper reports recent lattice characterization results obtained at the National Synchrotron Light Source II (NSLS-II) storage ring, conducted without reliance on a lattice model. A pair of beam position monitors (BPMs) with bunch-by-bunch (B×B) resolution, were recently installed in a section of the storage ring free of magnetic fields. The new BPM pair measured the beam, or bunch’s transverse Poincar´e map precisely after the beam was excited. Linear one-turn-matrices (OTM) were then derived, and from these, the 4-dimensional coupled Twiss parameters were extracted at the locations of the BPM pair. By normalizing beam oscillation amplitudes with the Twiss parameters, the global action-variables were obtained. These action-variables facilitated the measurement of the local Twiss parameters observed by other BPMs independent on lattice model. This method is general, and particularly useful in certain scenarios such as a round beam mode in a diffraction-limited light source ring. We applied it to assess both weakly and strongly coupled lattices at the NSLS-II ring. Through analysis of the strongly coupled lattice, the quadrupole tilt errors were estimated to be less than 400 µrad. Utilizing the BPMs’ B×B resolution, for the first time we observed the variations of the linear lattice along a long bunch-train.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Accelerators for the Future: R&D at the Fermilab FAST Facility

High energy physics in the U.S. has ambitious plans requiring new and improved accelerator technologies, including an upgraded complex at Fermilab for DUNE, next-generation light sources, and the potential of a future collider to be built on U.S. soil. To address these requirements, Fermilab operates the Fermilab Accelerator Science and Technology (FAST) facility, dedicated to accelerator R&D. FAST includes an electron gun and superconducting RF linac (up to 300 MeV), a storage ring, and an upcoming proton source and injector line (up to 2.5 MeV). In addition to the future of Fermilab accelerators, the broad physics program includes general R&D with potential impact across the DOE science program. This colloquium will provide a basic introduction to accelerator technologies and describe the principles of proton and electron accelerators, including the challenges associated with next-generation operations. We will discuss the exciting R&D ongoing at FAST to address the required technological advancements, focusing on Non-Linear Integrable Optics (NIO) for improved beam intensity and Optical Stochastic Cooling (OSC) for improved beam quality, and touching on a wide range of additional ongoing research. I intend to make the content interesting and accessible to those who have never taken any formal courses in accelerator physics.

43 PARTICLE ACCELERATORS↗