Search NASA⌕ Search

SEARCH · Search NASA

Results for “linear approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Comparison of measured and modelled negative hydrogen ion densities at the ECR-discharge HOMER

As the negative hydrogen ion density n{sub H{sup −}} is a key parameter for the investigation of negative ion sources, its diagnostic quantification is essential in source development and operation as well as for fundamental research. By utilizing the photodetachment process of negative ions, generally two different diagnostic methods can be applied: via laser photodetachment, the density of negative ions is measured locally, but only relatively to the electron density. To obtain absolute densities, the electron density has to be measured additionally, which induces further uncertainties. Via cavity ring-down spectroscopy (CRDS), the absolute density of H{sup −} is measured directly, however LOS-averaged over the plasma length. At the ECR-discharge HOMER, where H{sup −} is produced in the plasma volume, laser photodetachment is applied as the standard method to measure n{sub H{sup −}}. The additional application of CRDS provides the possibility to directly obtain absolute values of n{sub H{sup −}}, thereby successfully bench-marking the laser photodetachment system as both diagnostics are in good agreement. In the investigated pressure range from 0.3 to 3 Pa, the measured negative hydrogen ion density shows a maximum at 1 to 1.5 Pa and an approximately linear response to increasing input microwave powers from 200 up to 500 W. Additionally, the volume production of negative ions is 0-dimensionally modelled by balancing H{sup −} production and destruction processes. The modelled densities are adapted to the absolute measurements of n{sub H{sup −}} via CRDS, allowing to identify collisions of H{sup −} with hydrogen atoms (associative and non-associative detachment) to be the dominant loss process of H{sup −} in the plasma volume at HOMER. Furthermore, the characteristic peak of n{sub H{sup −}} observed at 1 to 1.5 Pa is identified to be caused by a comparable behaviour of the electron density with varying pressure, as n{sub e} determines the volume production rate via dissociative electron attachment to vibrationally excited hydrogen molecules.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optical design of the short pulse x-ray imaging and microscopy time-angle correlated diffraction beamline at the Advanced Photon Source

The short pulse x-ray imaging and microscopy beamline is one of the two x-ray beamlines that will take full advantage of the short pulse x-ray source in the Advanced Photon Source (APS) upgrade. A horizontally diffracting double crystal monochromator which includes a sagittally focusing second crystal will collect most of the photons generated when the chirped electron beam traverses the undulator. A Kirkpatrick-Baez mirror system after the monochromator will deliver to the sample a beam which has an approximately linear correlation between time and vertical beam angle. The correlation at the sample position has a slope of 0.052 ps/{mu}rad extending over an angular range of 800 {mu}rad for a cavity deflection voltage of 2 MV. The expected time resolution of the whole system is 2.6 ps. The total flux expected at the sample position at 10 keV with a 0.9 eV energy resolution is 5.7 Multiplication-Sign 10{sup 12} photons/s at a spot having horizontal and vertical full width at half maximum of 33 {mu}m horizontal by 14 {mu}m vertical. This new beamline will enable novel time-dispersed diffraction experiments on small samples using the full repetition rate of the APS.

43 PARTICLE ACCELERATORS↗

The Star Formation Main Sequence in the Hubble Space Telescope Frontier Fields

We investigate the relation between star formation rate (SFR) and stellar mass (M), i.e., the main sequence (MS) relation of star-forming galaxies, at 1.3⩽z<6 in the first four Hubble Space Telescope (HST) Frontier Fields, on the basis of rest-frame UV observations. Gravitational lensing combined with deep HST observations allows us to extend the analysis of the MS down to log M/M{sub ⊙}∼7.5 at z≲4 and log M/M{sub ⊙}∼8 at higher redshifts, a factor of ∼10 below most previous results. We perform an accurate simulation to take into account the effect of observational uncertainties and correct for the Eddington bias. This step allows us to reliably measure the MS and in particular its slope. While the normalization increases with redshift, we fit an unevolving and approximately linear slope. We nicely extend to lower masses the results of brighter surveys. Thanks to the large dynamic range in mass and by making use of the simulation, we analyzed any possible mass dependence of the dispersion around the MS. We find tentative evidence that the scatter decreases with increasing mass, suggesting a larger variety of star formation histories in low-mass galaxies. This trend agrees with theoretical predictions and is explained as either a consequence of the smaller number of progenitors of low-mass galaxies in a hierarchical scenario and/or of the efficient but intermittent stellar feedback processes in low-mass halos. Finally, we observe an increase in the SFR per unit stellar mass with redshift milder than predicted by theoretical models, implying a still incomplete understanding of the processes responsible for galaxy growth.

79 ASTRONOMY AND ASTROPHYSICS↗

ISM masses and the star formation law at Z = 1 to 6: ALMA observations of dust continuum in 145 galaxies in the cosmos survey field

ALMA Cycle 2 observations of long-wavelength dust emission in 145 star-forming galaxies are used to probe the evolution of the star-forming interstellar medium (ISM). We also develop a physical basis and empirical calibration (with 72 low-z and z ∼ 2 galaxies) for using the dust continuum as a quantitative probe of ISM masses. The galaxies with the highest star formation rates (SFRs) at 〈z〉 = 2.2 and 4.4 have gas masses up to 100 times that of the Milky Way and gas mass fractions reaching 50%–80%, i.e., gas masses 1-4× their stellar masses. We find a single high-z star formation law: SFR=35 M{sub mol}{sup 0.89}×(1+z){sub z=2}{sup 0.95}×(sSFR){sub MS}{sup 0.23} M{sub ⊙} yr{sup −1}—an approximately linear dependence on the ISM mass and an increased star formation efficiency per unit gas mass at higher redshift. Galaxies above the main sequence (MS) have larger gas masses but are converting their ISM into stars on a timescale only slightly shorter than those on the MS; thus, these “starbursts” are largely the result of having greatly increased gas masses rather than an increased efficiency of converting gas to stars. At z > 1, the entire population of star-forming galaxies has ∼2–5 times shorter gas depletion times than low-z galaxies. These shorter depletion times indicate a different mode of star formation in the early universe—most likely dynamically driven by compressive, high-dispersion gas motions—a natural consequence of the high gas accretion rates.

79 ASTRONOMY AND ASTROPHYSICS↗

THREE-DIMENSIONAL HYDRODYNAMIC SIMULATIONS OF MULTIPHASE GALACTIC DISKS WITH STAR FORMATION FEEDBACK. I. REGULATION OF STAR FORMATION RATES

The energy and momentum feedback from young stars has a profound impact on the interstellar medium (ISM), including heating and driving turbulence in the neutral gas that fuels future star formation. Recent theory has argued that this leads to a quasi-equilibrium self-regulated state, and for outer atomic-dominated disks results in the surface density of star formation Σ{sub SFR} varying approximately linearly with the weight of the ISM (or midplane turbulent + thermal pressure). We use three-dimensional numerical hydrodynamic simulations to test the theoretical predictions for thermal, turbulent, and vertical dynamical equilibrium, and the implied functional dependence of Σ{sub SFR} on local disk properties. Our models demonstrate that all equilibria are established rapidly, and that the expected proportionalities between mean thermal and turbulent pressures and Σ{sub SFR} apply. For outer disk regions, this results in Σ{sub SFR}∝Σ√(ρ{sub sd}), where Σ is the total gas surface density and ρ{sub sd} is the midplane density of the stellar disk (plus dark matter). This scaling law arises because ρ{sub sd} sets the vertical dynamical time in our models (and outer disk regions generally). The coefficient in the star formation law varies inversely with the specific energy and momentum yield from massive stars. We find proportions of warm and cold atomic gas, turbulent-to-thermal pressure, and mean velocity dispersions that are consistent with solar-neighborhood and other outer disk observations. This study confirms the conclusions of a previous set of simulations, which incorporated the same physics treatment but was restricted to radial-vertical slices through the ISM.

79 ASTRONOMY AND ASTROPHYSICS↗

THE RELATION BETWEEN DYNAMICAL MASS-TO-LIGHT RATIO AND COLOR FOR MASSIVE QUIESCENT GALAXIES OUT TO z ∼ 2 AND COMPARISON WITH STELLAR POPULATION SYNTHESIS MODELS

We explore the relation between the dynamical mass-to-light ratio (M/L) and rest-frame color of massive quiescent galaxies out to z ∼ 2. We use a galaxy sample with measured stellar velocity dispersions in combination with Hubble Space Telescope and ground-based multi-band photometry. Our sample spans a large range in log M {sub dyn}/L {sub g} (of 1.6 dex) and log M {sub dyn}/L {sub K} (of 1.3 dex). There is a strong, approximately linear correlation between the M/L for different wavebands and rest-frame color. The root-mean-square scatter in log M {sub dyn}/L residuals implies that it is possible to estimate the M/L with an accuracy of ∼0.25 dex from a single rest-frame optical color. Stellar population synthesis (SPS) models with a Salpeter stellar initial mass function (IMF) cannot simultaneously match M {sub dyn}/L {sub g} versus (g – z){sub rest-frame} and M {sub dyn}/L {sub K} versus (g – K){sub rest-frame}. By changing the slope of the IMF we are still unable to explain the M/L of the bluest and reddest galaxies. We find that an IMF with a slope between α = 2.35 and α = 1.35 provides the best match. We also explore a broken IMF with a Salpeter slope at M < 1 M {sub ☉} and M > 4 M {sub ☉} and a slope α in the intermediate region. The data favor a slope of α = 1.35 over α = 2.35. Nonetheless, our results show that variations between different SPS models are comparable to the IMF variations. In our analysis we assume that the variation in M/L and color is driven by differences in age, and that other contributions (e.g., metallicity evolution, dark matter) are small. These assumptions may be an important source of uncertainty as galaxies evolve in more complex ways.

79 ASTRONOMY AND ASTROPHYSICS↗

Fractal dimension of cohesive sediment flocs at steady state under seven shear flow conditions

The morphological properties of kaolin flocs were investigated in a Couette-flow experiment at the steady state under seven shear flow conditions (shear rates of 5.36, 9.17, 14, 24, 31, 41 and 53 s -1 ). These properties include a one-dimensional (1-D) fractal dimension (D 1 ), a two-dimensional (2-D) fractal dimension (D 2 ), a perimeter-based fractal dimension (D pf ) and an aspect ratio (AR). They were calculated based on the projected area (A), equivalent size, perimeter (P) and length (L) of the major axis of the floc determined through sample observation and an image analysis system. The parameter D 2 , which characterizes the relationship between the projected area and the length of the major axis using a power function, A ∝ L D 2 , increased from 1.73 ± 0.03, 1.72 ± 0.03, and 1.75 ± 0.04 in the low shear rate group (G = 5.36, 9.17, and 14 s -1 ) to 1.92 ± 0.03, 1.82 ± 0.02, 1.85 ± 0.02, and 1.81 ± 0.02 in the high shear rate group (24, 31, 41 and 53 s -1 ), respectively. The parameter D 1 characterizes the relationship between the perimeter and length of the major axis by the function P ∝ L D 1 and decreased from 1.52 ± 0.02, 1.48 ± 0.02, 1.55 ± 0.02, and 1.63 ± 0.02 in the low shear group (5.36, 9.17, 14 and 24 s -1 ) to 1.45 ± 0.02, 1.39 ± 0.02, and 1.39 ± 0.02 in the high shear group (31, 41 and 53 s -1 ), respectively. The results indicate that with increasing shear rates, the flocs become less elongated and that their boundary lines become tighter and more regular, caused by more breakages and possible restructurings of the flocs. The parameter D pf , which is related to the perimeter and the projected area through the function , decreased as the shear rate increased almost linearly. The parameter AR, which is the ratio of the length of the major axis and equivalent diameter, decreased from 1.56, 1.59, 1.53 and 1.51 in the low shear rate group to 1.43, 1.47 and 1.48 in the high shear rate group. These changes in D pf and AR show that the flocs become less convoluted and more symmetrical and that their boundaries become smoother and more regular in the high shear rate group than in the low shear rate group due to breakage and possible restructuring processes. To assess the effects of electrolyte and sediment concentration, 0.1 mol/L calcium chloride (CaCl 2 ) and initial sediment concentration from 7.87 × 10 -5 to 1.57 × 10 -5 were used in this preliminary study. The addition of electrolyte and increasing sediment concentration could produce more symmetrical flocs with less convoluted and simpler boundaries. In addition, some new information on the temporal variation of the median size of the flocs during the flocculation process is presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The microphysical contributions to and evolution of latent heating profiles in two MC3E MCSs

Abstract The shapes and magnitudes of latent heating profiles have been shown to be different within the convective and stratiform regions of mesoscale convective systems (MCSs). Properly representing these distinctions has significant implications for the atmospheric responses to latent heating on various scales. This study details (1) the microphysical process contributions to latent heating profiles within MCS convective, stratiform, and anvil regions and (2) the time evolution of these profiles throughout the MCS lifetime, using cloud‐resolving model simulations. Simulations of two MCS events that occurred during the Midlatitude Continental Convective Clouds Experiment (MC3E) are conducted. Several features of the simulated MCSs are compared to a suite of observations obtained during the MC3E field campaign, and it is concluded that the simulations reasonably reproduce the MCS events. The simulations show that condensation and deposition are the primary contributors to MCS latent warming, as compared to riming and nucleation processes. In terms of MCS latent cooling, sublimation, melting, and evaporation all play significant roles. It is evident that throughout the MCS lifecycle, convective regions demonstrate an approximately linear decrease in the magnitudes of latent heating rates, while latent heating within stratiform regions is associated with transitions between MCS flow regimes. Such information regarding the temporal evolution of latent heating within convective and stratiform MCS regions could be useful in developing parameterizations representing convective organization.

Marinescu, P. J.↗

Diffusion Creep of Enstatite at High Pressures Under Hydrous Conditions: Diffusion Creep of Hydrous Enstatite

Mantle convection and large-scale plate motion depend critically on the nature of the lithosphere-asthenosphere boundary and thus on the viscosity structure of Earth's upper mantle, which is determined by the rheological properties of its constituent minerals. To constrain the flow behavior of orthopyroxene, the second most abundant constituent of the upper mantle, deformation experiments were carried out in triaxial compressive creep on fine-grained (~6 μm) samples of enstatite at high pressures (3.8–6.3 GPa) and high temperatures (1323–1573 K) using a deformation-DIA apparatus. Based on results from this study, the deformation behavior of enstatite is quantitatively presented in the form of a flow law that describes the dependence of deformation rate on differential stress, water fugacity, temperature, and pressure. Specifically, the creep rate depends approximately linearly on stress, indicating deformation in the diffusion creep regime. A least squares regression fit to our data yielded a flow law for diffusion creep with an activation energy of ~200 kJ/mol and an activation volume of ~14 × 10 -6 m 3 /mol. The magnitude of the water-weakening effect is similar to that for olivine with a water fugacity exponent of r ≈ 0.7. This strong dependence of viscosity on water fugacity (concentration) indicates that the viscosity of an orthopyroxene-bearing mantle varies from one geological setting to another, depending on the large-scale water distribution. Based on the rheology contrast between olivine and enstatite, we conclude that olivine is weaker than enstatite throughout most of the upper mantle except in some shallow regions in the diffusion creep regime.

36 MATERIALS SCIENCE↗

From graphical to model-based distillation column design: A McCabe-Thiele-inspired mathematical programming approach

We propose a mixed-integer nonlinear programming (MINLP) model for simple and complex distillation column design and optimization. The model is based upon the concepts and equations underpinning the McCabe-Thiele method. Generalizing this method, we introduce material balances at various locations of the column and employ binary variables to determine the optimal number of trays and optimal feed locations. We model the vapor–liquid equilibrium using continuous piecewise linear approximating functions. The model is extended to account for multicomponent mixtures and non-constant-molar overflow. We also discuss how to estimate the minimum number of trays and the minimum reflux ratio.

42 ENGINEERING↗

Accelerating template generation in resonant anomaly detection searches with optimal transport

We introduce Resonant Anomaly Detection with Optimal Transport (RAD-OT), a method for generating signal templates in resonant anomaly detection searches. RAD-OT leverages the fact that the samples from the conditional probability density of the target features vary approximately linearly along the optimal transport path connecting the resonant feature. This does not assume that the conditional density itself is linear with the resonant feature, allowing RAD-OT to efficiently capture multimodal relationships, changes in resolution, etc. By solving the optimal transport problem, RAD-OT can quickly build a template by interpolating between the background distributions in two sideband regions. We demonstrate the performance of RAD-OT using the LHC Olympics R&D dataset, where we find comparable sensitivity and improved stability with respect to deep learning-based approaches.

Automation↗

A High-Order Eulerian–Lagrangian Runge–Kutta Finite Volume (EL–RK–FV) Method for Scalar Nonlinear Conservation Laws

Abstract We present a class of high-order Eulerian–Lagrangian Runge–Kutta finite volume methods that can numerically solve Burgers’ equation with shock formations, which could be extended to general scalar conservation laws. Eulerian–Lagrangian (EL) and semi-Lagrangian (SL) methods have recently seen increased development and have become a staple for allowing large time-stepping sizes. Yet, maintaining relatively large time-stepping sizes post shock formation remains quite challenging. Our proposed scheme integrates the partial differential equation on a space-time region partitioned by linear approximations to the characteristics determined by the Rankine–Hugoniot jump condition. We trace the characteristics forward in time and present a merging procedure for the mesh cells to handle intersecting characteristics due to shocks. Following this partitioning, we write the equation in a time-differential form and evolve with Runge–Kutta methods in a method-of-lines fashion. High-resolution methods such as ENO and WENO-AO schemes are used for spatial reconstruction. Extension to higher dimensions is done via dimensional splitting. Numerical experiments demonstrate our scheme’s high-order accuracy and ability to sharply capture post-shock solutions with large time-stepping sizes.

Chen, Jiajie↗

Gas–Liquid Chemical Reactions with Nanosecond Pulses: Role of Frequency and Pulse Delivery Modes

The effects of changes in the mode of delivery of nanosecond pulses in a gas-liquid plasma reactor on the formation of hydrogen peroxide, H 2 O 2 , and, as an indicator for ·OH radicals, the decoloration of methylene blue, MB, were determined for pulse delivery by a) increasing frequency with uniform pulses (5-50 kHz), b) variation of the time between bursts of pulses (burst period), c) changing the inner burst frequency (1 over the time between the pulses in the burst), and d) variation of number of pulses in a burst (N-cycles). H 2 O 2 peroxide formation was not affected by the method of pulse delivery in the range of parameters studied here and all data followed an approximately linear increase in H 2 O 2 production rate with discharge power. In contrast, the MB decoloration rate was affected by the burst modes. In terms of discharge power, the MB decoloration rate was highest for the uniform pulse mode; however, the linear trend in increase of MB decoloration with power when the burst period was varied, suggest that at higher power the burst mode may be more effective than the uniform pulsing. Consideration of the per pulse decoloration with energy per pulse and with number of pulses suggest that the burst mode can affect reactions differently from applying a uniform pulse.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear Polarization Effects in Dielectrics with Hydrogen Bonds

Using quasiclassical kinetic theory, nonlinear phenomena under the formation of space-charge polarization in crystals with hydrogen bonds (HBC) are investigated. From the solution of the nonlinear system of Fokker-Planck and Poisson equations with blocking electrodes, it is established that for the mathematical description of the relaxation polarization in HBCs in weak fields (100-1000 kV/m) and at high temperatures (T> 350 K), it is sufficient to use a linear approximation of perturbation theory. Theoretically, it was found that at the first odd frequency of the alternating field, nonlinear effects caused by the interaction of relaxation modes of various frequency orders start to appear. The diffusion and mobility coefficients are calculated taking into account both mechanisms of the protons transitions (thermally activated and tunneling transitions) through a parabolic potential barrier. A recurrence expression is constructed for calculating complex amplitudes of relaxation modes generated at an arbitrary frequency (multiple to the fundamental frequency) of the alternating field in an arbitrary approximation of perturbation theory. The proposed scheme for solving the kinetic equation can be applied to other crystals with ionic conductivity similar to HBCs in the type and properties of the crystal lattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Solute atmospheres at dislocations

In this study, a two-dimensional plane strain elastic solution is determined for the Cottrell solute atmosphere around an edge dislocation in an infinitely long cylinder of finite radius (the matrix), in which rows of solutes are represented by cylindrical rods with in-plane hydrostatic misfit (axial misfit is also considered). The periphery of the matrix is traction-free, thus introducing an image solute field which generates a solute-solute interaction energy that has not been considered previously. The relevant energy for the field of any distribution of solutes coexistent with a single edge dislocation along the (matrix) cylinder axis is determined, and coherency effects are discussed and studied. Monte Carlo simulations accounting for all pertinent interactions over a range of temperatures are found to yield solute distributions different from classical results, namely, (1) Fermi-Dirac condensations at low temperatures at the free surface, (2) the majority of the atmosphere lying within an unexpectedly large non-linear interaction region near the dislocation core, and (3) temperature-dependent asymmetrical solute arrangements that promote bending. The solute distributions at intermediate temperatures show a 1/r dependence in agreement with previous linearized approximations. With a standard state of solute corresponding to a mean concentration, c 0 , the relevant interaction energy expression presented in this work is valid when extended to large concentrations for which Henry's Law and Vegard's Law do not apply.

36 MATERIALS SCIENCE↗

Simulation of gas mixture dynamics in a pipeline network using explicit staggered-grid discretization

Here we develop an explicit staggered finite difference discretization scheme for simulating the transport of highly heterogeneous gas mixtures through pipeline networks. This study is motivated by the proposed blending of hydrogen into natural gas pipelines to reduce end use carbon emissions while using existing pipeline systems throughout their planned lifetimes. Our computational method accommodates an arbitrary number of constituent gases with very different physical properties that may be injected into a network with significant spatiotemporal variation. In this setting, the gas flow physics are highly location- and time- dependent, so that local composition and nodal mixing must be accounted for. The resulting conservation laws are formulated in terms of pressure, partial densities and flows, and volumetric and mass fractions of the constituents. We include non-ideal equations of state that employ linear approximations of gas compressibility factors, so that the pressure dynamics propagate locally according to a variable wave speed that depends on mixture composition and density. We derive compatibility relationships for network edge boundary values that are more complex than for a homogeneous gas. The simulation method is evaluated on initial boundary value problems for a single pipe and a small network, is cross-validated with a lumped element simulation, and used to demonstrate a local monitoring and control policy for maintaining allowable concentration levels.

97 MATHEMATICS AND COMPUTING↗

The crystal and coordination chemistry of neptunium in all its oxidation states: An expanded structural hierarchy of neptunium compounds

We report structures of 388 neptunium-bearing crystal structures are sorted into an expanded structural hierarchy and examined. The majority of structures contain Np(V) (149), Np(VI) (99), or Np(IV) (91) whereas structures containing Np(II), Np(III), Np(VII), or more than one oxidation state are rare. Coordination geometry of Np(V) and Np(VI) compounds is dominated by the approximately linear neptunyl cation. Actinyl–actinyl interactions (AAIs) are most prevalent in Np(V) compounds and are observed in 48% of these extended structures. Prismatic coordination geometries are commonly observed in Np(IV) compounds. Np(III) organometallic complexes display a variety of coordination modes. Coordination chemistry of Np(VII) compounds is dominated by the tetra-oxido core. Updated average bond length values are provided for Np(IV), Np(V), Np(VI), and Np(VII) compounds and updated bond valence parameters for Np(IV) are reported. A graphical notation system for neptunyl structures coordinated by organic ligands was developed to facilitate discussion and identify similarities between neptunyl compounds coordinated by oxyanions and neptunyl compounds coordinated by organic ligands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A miniature jet pump for slurries

Here, this work reports on the design and performance of a jet pump system to pump slurries. The jet pump uses a high-velocity water jet to entrain and pump the slurry. This pumping action requires no valves and does not use moving solid parts. Hence, the system can be readily sealed, and the pumping action creates no observable mechanical damage to slurry particles. We tested carbon black beads suspended in water at concentrations of 0.0, 0.2, and 2.0 wt% at primary jet flow rates of 50 and 100 mL/min. Our measurements show an approximately linear decrease in entrainment ratio (slurry-to-jet flow rate) and absolute slurry flow rate with increasing adverse (load) pressure difference. The entrainment ratio is a strong function of the absolute jet flow rate. Pump performance was insensitive to slurry composition. Micron-resolution particle image velocimetry (micro-PIV) revealed qualitative changes in the pump’s internal flow due to changes in absolute jet flow rate, including evidence of the suppression of a vortex at higher flow rates. These findings establish key operational parameters for the jet pump and highlight its potential in a variety of slurry flow pumping applications. The pump is particularly suited for flow electrode slurries (e.g. as used for energy storage and water treatment) as it maintains particle integrity and can be used with standard tubing, tube fittings, and sealing methods.

42 ENGINEERING↗