Search NASA⌕ Search

SEARCH · Search NASA

Results for “link design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Propagation considerations for the Odyssey system design

This paper presents an overview of the Odyssey system with special emphasis given to the link availability for both mobile link and feeder link. The Odyssey system design provides high link availability, typically 98 percent in the primary service areas, and better than 95 percent availability in other service areas. Strategies for overcoming Ka-band feeder link rain fades are presented. Mobile link propagation study results and summary link budgets are also presented.

Ho, Hau H.↗
NASA NTRS1996

Conceptual Design Oriented Wing Structural Analysis and Optimization

Airplane optimization has always been the goal of airplane designers. In the conceptual design phase, a designer's goal could be tradeoffs between maximum structural integrity, minimum aerodynamic drag, or maximum stability and control, many times achieved separately. Bringing all of these factors into an iterative preliminary design procedure was time consuming, tedious, and not always accurate. For example, the final weight estimate would often be based upon statistical data from past airplanes. The new design would be classified based on gross characteristics, such as number of engines, wingspan, etc., to see which airplanes of the past most closely resembled the new design. This procedure works well for conventional airplane designs, but not very well for new innovative designs. With the computing power of today, new methods are emerging for the conceptual design phase of airplanes. Using finite element methods, computational fluid dynamics, and other computer techniques, designers can make very accurate disciplinary-analyses of an airplane design. These tools are computationally intensive, and when used repeatedly, they consume a great deal of computing time. In order to reduce the time required to analyze a design and still bring together all of the disciplines (such as structures, aerodynamics, and controls) into the analysis, simplified design computer analyses are linked together into one computer program. These design codes are very efficient for conceptual design. The work in this thesis is focused on a finite element based conceptual design oriented structural synthesis capability (CDOSS) tailored to be linked into ACSYNT.

Lau, May Yuen↗
NASA NTRS2000

Overview of the Preliminary Design of the Optical Communication Demonstration and High-Rate Link Facility

Tlis paper presents an overview of the preliminary design of both the flight and ground systems of the Optical Communication Demonstration and High-Rate Link Facility which will demonstrate optical communication from the International Space Station to ground after its deployment in October 2002. The overview of the preliminary design of the Flight System proceeds by contrasting it with the design of the laboratory-model unit, emphasizing key changes and the rationale behind the design choices. After presenting the preliminary design of the Ground System, the timetable for the construction and deployment of the flight and ground systems is outlined.

Sandusky, John V.↗
DOE OSTI2025

Redefining Design for Remanufacturing: A Practical Methodology for Prioritizing Remanufacturing Design Rules

Products are often discarded when they fail or no longer meet user needs. These outcomes are frequently shaped by early design decisions. While remanufacturing offers a sustainable alternative by restoring products to like‐new condition, its potential is often limited by designs that do not consider remanufacturing from the outset. This research addresses that challenge by introducing a structured Design for Remanufacturing (DfRem) methodology and a CAD‐integrated tool to support real‐time design decisions. The DfRem framework introduces a new primary design function focused on preserving product functionality across its life cycle. It is supported by a fault tree that identifies failure modes that limit remanufacturing potential and a hierarchy of design principles including Prevent, Minimize, Relocate, Restore, and others. Each principle is linked to actionable design rules that help engineers reduce the need for remanufacturing or improve its efficiency when necessary. To operationalize this framework, we developed CAD plugins for Autodesk Inventor and PTC Creo. These tools use a state machine model to present prioritized design rules based on selected failure modes and user input. By embedding DfRem logic directly into widely used CAD environments, the tool enables engineers to make sustainability‐informed decisions without disrupting existing workflows. Furthermore, this approach highlights the critical role of design in enabling circular and resource‐efficient product development, making remanufacturing a more practical and accessible strategy during the early stages of product design.

CAD↗
NASA NTRS1976

Characterization of the CTS 12 and 14 GHz communications links - Preliminary measurements and evaluation

The Communications Link Characterization Experiment is designed to characterize the radio frequency links of the Communications Technology Satellite. The experiment is twofold: (1) it will study the natural characteristics in the CTS frequency bands (14 GHz uplink, and 12 GHz downlink) including attenuation and signal degradation due primarily to absorption and scattering induced by precipitation, and (2) it will perform environmental measurements for the characterization of man-made, earth-based signals which could interfere with the uplink frequency bands of the satellite.

Ippolito, L. J.↗
NASA NTRS2005

Parallel Estimators and Communication in Spacecraft Formations

This paper investigates the closed-loop dynamics of systems controlled via parallel estimators. This structure arises in formation flying problems when each spacecraft bases its control action on an internal estimate of the complete formation state. For LTI systems a separation principle shows that the necessary and sufficient conditions for overall system stability are more stringent than the single controller case; the controllers' open-loop dynamics necessarily appear in the closed-loop dynamics. Communication amongst the spacecraft can be used to specify the complete system dynamics and a framework for integrating the design of the communication links into the formation flying control design problem is presented.

communications↗
NASA NTRS2008

System Engineering for J-2X Development: The Simpler, the Better

The Ares I and Ares V Vehicles will utilize the J-2X rocket engine developed for NASA by the Pratt and Whitney Rocketdyne Company (PWR) as the upper stage engine (USE). The J-2X is an improved higher power version of the original J-2 engine used for Apollo. System Engineering (SE) facilitates direct and open discussions of issues and problems. This simple idea is often overlooked in large, complex engineering development programs. Definition and distribution of requirements from the engine level to the component level is controlled by Allocation Reports which breaks down numerical design objectives (weight, reliability, etc.) into quanta goals for each component area. Linked databases of design and verification requirements help eliminate redundancy and potential mistakes inherent in separated systems. Another tool, the Architecture Design Description (ADD), is used to control J-2X system architecture and effectively communicate configuration changes to those involved in the design process. But the proof of an effective process is in successful program accomplishment. SE is the methodology being used to meet the challenge of completing J-2X engine certification 2 years ahead of any engine program ever developed at PWR. This paper describes the simple, better SE tools and techniques used to achieve this success.

Kelly, William M.↗
NASA NTRS2006

Generation of Data-Rate Profiles of Ka-Band Deep-Space Links

A short report discusses a methodology for designing Ka-band Deep-Space-to- Earth radio-communication links. This methodology is oriented toward minimizing the effects of weather on the Ka-band telecommunication link by maximizing the expected data return subject to minimum link availability and a limited number of data rates. This methodology differs from the current standard practices in which a link is designed according to a margin policy for a given link availability at 10 elevation. In this methodology, one chooses a data-rate profile that will maximize the average data return over a pass while satisfying a minimum-availability requirement for the pass, subject to mission operational limitations expressed in terms of the number of data rates used during the pass. The methodology is implemented in an intelligent search algorithm that first finds the allowable data-rate profiles from the mission constraints, spacecraft-to-Earth distance, spacecraft EIRP (effective isotropic radiated power), and the applicable zenith atmospheric noise temperature distribution, and then selects the best data rate in terms of maximum average data return from the set of allowable data-rate profiles.

Shambayati, Shervin↗
NASA NTRS1990

Learning control system design based on 2-D theory - An application to parallel link manipulator

An approach to iterative learning control system design based on two-dimensional system theory is presented. A two-dimensional model for the iterative learning control system which reveals the connections between learning control systems and two-dimensional system theory is established. A learning control algorithm is proposed, and the convergence of learning using this algorithm is guaranteed by two-dimensional stability. The learning algorithm is applied successfully to the trajectory tracking control problem for a parallel link robot manipulator. The excellent performance of this learning algorithm is demonstrated by the computer simulation results.

Geng, Z.↗
DOE OSTI2025

Best practices for in-situ and operando techniques within electrocatalytic systems

In-situ and operando techniques in heterogeneous electrocatalysis are a powerful tool used to elucidate reaction mechanisms. Ultimately, they are key in determining concrete links between a catalyst’s physical/electronic structure and its activity en route to designing next-generation systems. To this end, the exact execution and interpretation of these lines of experiments is critical as this determines the strength of conclusions that can be drawn and what uncertainties remain. Instead of focusing on how techniques were used to understand systems, as is the case with most reviews on the topic, this work instead initiates a nuanced discussion of 1) how to best carry out each technique and 2) initiate a nuanced analysis of which level of insights can be drawn from the set of in-situ or operando experiments/controls carried out. We focus on several commonly used techniques, including vibrational (IR, Raman) spectroscopy, X-ray absorption spectroscopy and electrochemical mass spectrometry. In addition to this, we include sections of reactor design and the link with theoretical modelling that are applicable across all techniques. While we focus on heterogeneous electrocatalysis, we make links when appropriate to the areas of photo- and thermo-catalytic systems. We highlight common pitfalls in the field, how to avoid them, and what sets of complementary experiments may be used to strengthen the analysis. We end with an overview of what gaps remain in in-situ and operando techniques and what innovations must be made to overcome them.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2004

Early Design Choices: Capture, Model, Integrate, Analyze, Simulate

I. Designs are constructed incrementally to meet requirements and solve problems: a) Requirements types: objectives, scenarios, constraints, ilities. etc. b) Problem/issue types: risk/safety, cost/difficulty, interaction, conflict, etc. II. Capture requirements, problems and solutions: a) Collect design and analysis products and make them accessible for integration and analysis; b) Link changes in design requirements, problems and solutions; and c) Harvest design data for design models and choice structures. III. System designs are constructed by multiple groups designing interacting subsystems a) Diverse problems, choice criteria, analysis methods and point solutions. IV. Support integration and global analysis of repercussions: a) System implications of point solutions; b) Broad analysis of interactions beyond totals of mass, cost, etc.

Malin, Jane T.↗
NASA NTRS1993

Design optimization studies using COSMIC NASTRAN

The purpose of this study is to create, test and document a procedure to integrate mathematical optimization algorithms with COSMIC NASTRAN. This procedure is very important to structural design engineers who wish to capitalize on optimization methods to ensure that their design is optimized for its intended application. The OPTNAST computer program was created to link NASTRAN and design optimization codes into one package. This implementation was tested using two truss structure models and optimizing their designs for minimum weight, subject to multiple loading conditions and displacement and stress constraints. However, the process is generalized so that an engineer could design other types of elements by adding to or modifying some parts of the code.

Pitrof, Stephen M.↗
NASA NTRS2014

Intuitive Tools for the Design and Analysis of Communication Payloads for Satellites

In an effort to make future communications satellite payload design more efficient and accessible, two tools were created with intuitive graphical user interfaces (GUIs). The first tool allows payload designers to graphically design their payload by using simple drag and drop of payload components onto a design area within the program. Information about each picked component is pulled from a database of common space-qualified communication components sold by commerical companies. Once a design is completed, various reports can be generated, such as the Master Equipment List. The second tool is a link budget calculator designed specifically for ease of use. Other features of this tool include being able to access a database of NASA ground based apertures for near Earth and Deep Space communication, the Tracking and Data Relay Satellite System (TDRSS) base apertures, and information about the solar system relevant to link budget calculations. The link budget tool allows for over 50 different combinations of user inputs, eliminating the need for multiple spreadsheets and the user errors associated with using them. Both of the aforementioned tools increase the productivity of space communication systems designers, and have the colloquial latitude to allow non-communication experts to design preliminary communication payloads.

communication↗
NASA NTRS1982

Telecommunications systems design

The general configuration of deep space telecommunication systems is reviewed with regard to the design criteria necessary to insure the integrity of the system's telemetry, command, and tracking functions. The signal to noise spectral density ratios that characterize telecommunications performance are defined in terms of the link parameters. For design control, a statistical approach to predict link performance and to assess its uncertainty is described.

Yuen, J. H.↗
NASA NTRS1984

Optimum Cyclic Redundancy Codes for Noisier Channels

Binary cyclic redundancy codes for feedback communication over noisy digital links are considered. The standard 16 bit American Data and Computer Communication Protocol (ADCCP) polynomial is designed for digital links which already have a low input bit error probability. For file transfer between personal computers over telephone circuits, the quality of resulting digital circuit may be much lower. The 3 byte (24 bit) and 4 byte (32 bit) polynomials are considered. Generator polynomials of a certain class have minimum weight and yet achieve the bound on minimum distance for arbitrary codes. Particular choices for 24 bit and 32 bit redundancies are exhibited: of weight and distance 6 in the 24-bit case; and weight 10 and distance 8 in the 32-bit case.

Merkey, P.↗
NASA NTRS1984

Optimum cyclic redundancy codes for noisy channels

Binary cyclic redundancy codes for feedback communication over noisy digital links are considered. The standard 16 bit American Data and Computer Communication Protocol (ADCCP) polynomial is designed for digital links which already have a low input bit error probability. For file transfer between personal computers over telephone circuits, the quality of resulting digital circuit may be much lower. The 3 byte (24 bit) and 4 byte (32 bit) polynomials are considered. Generator polynomials of a certain class have minimum weight and yet achieve the bound on minimum distance for arbitrary codes. Particular choices for 24 bit and 32 bit redundancies are exhibited: of weight and distance 6 in the 24-bit case; and weight 10 and distance 8 in the 32-bit case.

Merkey, P.↗