Search NASA⌕ Search

SEARCH · Search NASA

Results for “magnetic structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Study of local structure and magnetism in high-T(sub c) copper oxide superconductors

The muon spin rotation (MUSR) study of local magnetism of Sr-doped La2CuO4 is reviewed. Emphasis is placed on magnetic order as detected by local and bulk probes with local atomic environments studied by x ray absorption fine structure (XAFS). Correlations between the MUSR study of local magnetic ordering and the bulk magnetization study are presented along with a discussion of the dependence upon oxygen stoichiometry. Results are presented for both superconducting phases and magnetic phases. Recent data which reveals the existence of local magnetic ordering in the hydrogen-doped YBa2Cu3O7 system are also discussed.

Budnick, J. I.↗

Influence of magnetic field structure on the conduction cooling of flare loops

A simple model facilitates calculation of the influence of magnetic-field configuration on the conduction cooling rate of a hot post-flare coronal plasma. The magnetic field is taken to be that produced by a line dipole or point dipole at an arbitrary depth below the chromosphere. For the high temperatures (at least 10 million K) produced by flares, the plasma may remain static and isobaric. The influence of the field is such as to increase the heat flux (per unit area) into the chromosphere, but to decrease the total conduction cooling of the flare plasma. This leads to a significant enhancement of the total energy radiated by the flare plasma.

Antiochos, S. K.↗

SPDE/SPRE final summary report

Mechanical Technology Incorporated (MTI) performed acceptance testing on the Space Power Research Engine (SPRE), which demonstrated satisfactory operation and sufficient reliability for delivery to NASA Lewis Research Center. The unit produced 13.5 kW PV power with an efficiency of 22 percent versus design goals of 28.8 kW PV power and efficiency of 28 percent. Maximum electric power was only 8 kWe due to lower alternator efficiency. One of the major shortcomings of the SPRE was linear alternator efficiency, which was only 70 percent compared to a design value of 90 percent. It was determined from static tests that the major cause for the efficiency shortfall was the location of the magnetic structure surrounding the linear alternator. Testing of an alternator configuration without a surrounding magnetic structure on a linear dynamometer confirmed earlier static test results. Linear alternator efficiency improved from 70 percent to over 90 percent. Testing of the MTI SPRE was also performed with hydrodynamic bearings and achieved full-stroke, stable operation. This testing indicated that hydrodynamic bearings may be useful in free piston Stirling engines. An important factor in achieving stable operation at design stroke was isolating a portion of the bearing length from the engine pressure variations. In addition, the heat pipe heater head design indicates that integration of a Stirling engine with a heat source can be performed via heat pipes. This design provides a baseline against which alternative designs can be measured.

Dochat, George↗

Formation and eruption of solar prominences

A model for the magnetic field associated with solar prominences is considered. It is shown that flux cancellation at the neutral line of a sheared magnetic arcade leads to the formation of helical field lines which are capable, in principle, of supporting prominence plasma. A numerical method for the computation of force-free, canceling magnetic structures is presented. Starting from an initial potential field we prescribe the motions of magnetic footpoints at the photosphere, with reconnection occurring only at the neutral line. As more and more flux cancels, magnetic flux is transferred from the arcade field to the helical field. Results for a particular model of the photospheric motions are presented. The magnetic structure is found to be stable: the arcade field keeps the helical field tied down at the photosphere. The axis of the helical field moves to larger and larger height, suggestive of prominence eruption. These results suggest that prominence eruptions may be trigered by flux cancellation.

Van Ballegooijen, A. A.↗

Methods and instruments for materials testing

Methods and instruments for characterizing a material, such as the properties of bone in a living human subject, using a test probe constructed for insertion into the material and a reference probe aligned with the test probe in a housing. The housing is hand held or placed so that the reference probe contacts the surface of the material under pressure applied either by hand or by the weight of the housing. The test probe is inserted into the material to indent the material while maintaining the reference probe substantially under the hand pressure or weight of the housing allowing evaluation of a property of the material related to indentation of the material by the probe. Force can be generated by a voice coil in a magnet structure to the end of which the test probe is connected and supported in the magnet structure by a flexure, opposing flexures, a linear translation stage, or a linear bearing. Optionally, a measurement unit containing the test probe and reference probe is connected to a base unit with a wireless connection, allowing in the field material testing.

Hansma, Paul↗

Polarimetric imaging of the Galactic center at 12.4 microns - The detailed magnetic field structure in the northern arm and the east-west bar

Recent closely sampled imaging polarimetry of the central 0.5 pc of the Galaxy at 12.4 microns with a 58 x 62 array camera system is presented. The results clearly show that the magnetic field is a property of the diffuse material of the large-scale structures in Sgr A (the northern arm and east-west bar) rather than the embedded sources. The magnetic field is independent of the changes of density and temperature in the compact source environments. The magnetic field direction in much of the east-west bar is complex, and its polarization is probably the result of the superposition of differently oriented filaments. The abrupt decrease of polarization southwest of IRS 1 observed previously is confirmed and shown to reverse sign. This is due either to a rapid change of magnetic field direction close to the dynamical center, or to the superposition of nearly orthogonal fields. The field direction changes smoothly across IRS 1, and no discontinuity of motion here is found.

Aitken, David K.↗

The magnetic and thermodynamical structure of a coronal hole

A nonpolytropic model of a polar coronal hole of 2-5 solar radii constructed. The main assumptions are: (1) the magnetic structure of the sun can be described by a combination of dipole-like and radial fields; (2) in the magnetically dominated region rho(nu sq/2) much less than B sq/8 pi the influence of the outflow on the magnetic structure is negligible. The magnetic and thermodynamic structures are obtained by solving the force balance equation for plasma with the observationally derived electron density. Profiles of velocities in the acceleration regime are presented and the influence of the outflow on the thermodynamic structure of the solar corona above the polar region is discussed.

Osherovich, V. A.↗

The Hyper-inflation Stage in the Coronal Mass Ejection Formation: A Missing Link That Connects Flares, Coronal Mass Ejections, and Shocks in the Low Corona

We analyze the formation and three-dimensional (3D) evolution of two coronal mass ejections (CMEs) and their associated waves in the low corona via a detailed multi-viewpoint analysis of extreme-ultraviolet observations. We analyze the kinematics in the radial and lateral directions and identify three stages in the early evolution of the CME: (1) a hyper-inflation stage, when the CME laterally expands at speeds of ∼1000 km/s, followed by (2) a shorter and slower expansion stage of a few minutes and ending with (3) a self-similar phase that carries the CME into the middle corona. The first two stages coincide with the impulsive phase of the accompanying flare, the formation and separation of an EUV wave from the CME, and the start of the metric type II radio burst. Our 3D analysis suggests that the hyper-inflation phase may be a crucial stage in the CME formation with wide-ranging implications for solar eruption research. It likely represents the formation stage of the magnetic structure that is eventually ejected into the corona, as the white-light CME. It appears to be driven by the injection of poloidal flux into the ejecting magnetic structure, which leads to the lateral (primarily) growth of the magnetic flux rope. The rapid growth results in the creation of EUV waves and eventually shocks at the CME flanks that are detected as metric type II radio bursts. In other words, the hyper-inflation stage in the early CME evolution may be the "missing" link between CMEs, flares, and coronal shocks.

Solar coronal waves↗

Solar Prominence Eruption

The prominence that erupts in a prominence eruption is a magnetic structure in the chromosphere and corona. It is visible in chromospheric images by virtue of chromospheric-temperature plasma suspended in the magnetic field, and belongs to that large class of magnetic structures appropriately called filaments because of their characteristic sinewy sigmoidal form. Hence, the term "filament eruption" is used interchangeably with the term "prominence eruption". The magnetic field holding a filament is prone to undergo explosive changes in configuration. In these upheavals, because the filament material is compelled by its high conductivity to ride with the magnetic field that threads it, this material is a visible tracer of the field motion. The part of the magnetic explosion displayed by the entrained filament material is the phenomenon known as a filament eruption, the topic of this article. This article begins with a description of basic observed characteristics of filament eruptions, with attention to the magnetic fields, flares, and coronal mass ejections in which erupting filaments are embedded. The present understanding of these characteristics in terms of the form and action of the magnetic field is then laid out by means of a rudimentary three-dimensional model of the field. The article ends with basic questions that this picture leaves unresolved and with remarks on the observations needed to probe these questions.

Moore, Ronald L.↗

Photospheric Magnetic Evolution in the WHI Active Regions

Sequences of line-of-sight (LOS) magnetograms recorded by the Michelson Doppler Imager are used to quantitatively characterize photospheric magnetic structure and evolution in three active regions that rotated across the Sun s disk during the Whole Heliosphere Interval (WHI), in an attempt to relate the photospheric magnetic properties of these active regions to flares and coronal mass ejections (CMEs). Several approaches are used in our analysis, on scales ranging from whole active regions, to magnetic features, to supergranular scales, and, finally, to individual pixels. We calculated several parameterizations of magnetic structure and evolution that have previously been associated with flare and CME activity, including total unsigned magnetic flux, magnetic flux near polarity-inversion lines, amount of canceled flux, the "proxy Poynting flux," and helicity flux. To catalog flare events, we used flare lists derived from both GOES and RHESSI observations. By most such measures, AR 10988 should have been the most flare- and CME-productive active region, and AR 10989 the least. Observations, however, were not consistent with this expectation: ARs 10988 and 10989 produced similar numbers of flares, and AR 10989 also produced a few CMEs. These results highlight present limitations of statistics-based flare and CME forecasting tools that rely upon line-of-sight photospheric magnetic data alone.

Welsch, B. T.↗

Neutral-Line Magnetic Shear and Enhanced Coronal Heating in Solar Active Regions

By examining the magnetic structure at sites in the bright coronal interiors of active regions that are not flaring but exhibit persistent strong coronal heating, we establish some new characteristics of the magnetic origins of this heating. We have examined the magnetic structure of these sites in five active regions, each of which was well observed by both the Yohkoh SXT and the Marshall Space Flight Center Vector Magnetograph and showed strong shear in its magnetic field along part of at least one neutral line (polarity inversion). Thus, we can assess whether this form of nonpotential field structure in active regions is a characteristic of the enhanced coronal heating and vice versa. From 27 orbits' worth of Yohkoh SXT images of the five active regions, we have obtained a sample of 94 persistently bright coronal features (bright in all images from a given orbit), 40 long (greater than or approximately equals 20,000 km) neutral-line segments having strong magnetic shear throughout (shear angle greater than 45 deg), and 39 long neutral-line segments having weak magnetic shear throughout (shear angle less than 45 deg). From this sample, we find that: (1) all of our persistently bright coronal features are rooted in magnetic fields that are stronger than 150 G; (2) nearly all (95%) of these enhanced coronal features are rooted near neutral lines (closer than 10,000 km); (3) a great majority (80%) of the bright features are rooted near strong-shear portions of neutral lines; (4) a great majority (85%) of long strong-shear segments of neutral lines have persistently bright coronal features rooted near them; (5) a large minority (40%) of long weak-shear segments of neutral lines have persistently bright coronal features rooted near them; and (6) the brightness of a persistently bright Coronal feature often changes greatly over a few hours. From these results, we conclude that most persistent enhanced heating of coronal loops in active regions: (1) requires the presence of a polarity inversion in the magnetic field near at least one of the loop footpoints; (2) is greatly aided by the presence of strong shear in the core magnetic field along that neutral line; and (3) is controlled by some variable process that acts in this magnetic environment. We infer that this variable process is low-lying reconnection accompanying flux cancellation.

Falconer, D. A.↗

Microwave, soft and hard X-ray imaging observations of two solar flares

A set of microwave and hard X-ray observations of two flares observed simultaneously with the Very Large Array (VLA) and the Solar Maximum Mission Hard X-ray Imaging Spectrometer (SMM-HXIS) are presented. The LVA was used at 6 cm to map the slowly varying and burst components in three neighboring solar active regions (Boulder Nos. 2522, 2530, and 2519) from approximately 14:00 UT until 01:00 UT on June 24-25, 1980. Six microwave bursts less than 30 sfu were observed, and for the strongest of these, two-dimensional 'snapshot' (10 s) maps with spatial resolution of 5 in. were synthesized. HXIS data show clear interconnections between regions 2522 and 2530. The X-ray observations present a global picture of flaring activity, while the VLA data show the complexity of the small magnetic structures associated with the impulsive phase phenomena. It is seen that energy release did not occur in a single isolated magnetic structure, but over a large area of intermingled loop structures.

Kundu, M. R.↗

Causes of Extremely Fast CMEs

We study CMEs observed by LASCO to have plane of the sky velocities exceeding 1500 km/sec. We find that these extremely fast CMEs are typically associated with flares accompanied by erupting prominences. Our results are consistent with a single CME initiation process that consists of three stages. The initial stage is brought about by the emergence of new magnetic flux, which interacts with the pre-existing magnetic configuration and results in a slow rise of the magnetic structure. The second stage is a fast reconnection phase with flaring, filament eruption and a sudden increase of the rise velocity of the magnetic structure (CME). The third stage consists of propagation in the corona. We discuss the sources of these CMEs and the need for improved understanding of the first and third stages.

solar flares↗

The Effects of Magnetic-Field Geometry on Longitudinal Oscillations of Solar Prominences: Cross-Sectional Area Variation for Thin Tubes

Solar prominences are subject to both field-aligned (longitudinal) and transverse oscillatory motions, as evidenced by an increasing number of observations. Large-amplitude longitudinal motions provide valuable information on the geometry of the filament channel magnetic structure that supports the cool prominence plasma against gravity. Our pendulum model, in which the restoring force is the gravity projected along the dipped field lines of the magnetic structure, best explains these oscillations. However, several factors can influence the longitudinal oscillations, potentially invalidating the pendulum model. Aims. The aim of this work is to study the influence of large-scale variations in the magnetic field strength along the field lines, i.e., variations of the cross-sectional area along the flux tubes supporting prominence threads. Methods. We studied the normal modes of several flux tube configurations, using linear perturbation analysis, to assess the influence of different geometrical parameters on the oscillation properties. Results. We found that the influence of the symmetric and asymmetric expansion factors on longitudinal oscillations is small.Conclusions. We conclude that the longitudinal oscillations are not significantly influenced by variations of the cross-section of the flux tubes, validating the pendulum model in this context.

Luna, M.↗

The Multi-Spectral Solar Telescope Array (MSSTA)

In 1987, our consortium pioneered the application of normal incidence multilayer X-ray optics to solar physics by obtaining the first high resolution narrow band, "thermally differentiated" images of the corona', using the emissions of the Fe IX/Fe X complex at ((lambda)lambda) approx. 171 A to 175 A, and He II Lyman (beta) at 256 A. Subsequently, we developed a rocket borne solar observatory, the Multi Spectral Solar Telescope Array (MSSTA) that pioneered multi-thermal imaging of the solar atmosphere, using high resolution narrow band X-ray, EUV and FUV optical systems. Analysis of MSSTA observations has resulted in four significant insights into the structure of the solar atmosphere: (1) the diameter of coronal loops is essentially constant along their length; (2) models of the thermal and density structure of polar plumes based on MSSTA observations have been shown to be consistent with the thesis that they are the source of high speed solar wind streams; (3) the magnetic structure of the footpoints of polar plumes is monopolar, and their thermal structure is consistent with the thesis that the chromosphere at their footpoints is heated by conduction from above; (4) coronal bright points are small loops, typically 3,500 - 20,000 km long (5 sec - 30 sec); their footpoints are located at the poles of bipolar magnetic structures that are are distinguished from other network elements by having a brighter Lyman a signature. Loop models derived for 26 bright points are consistent with the thesis that the chromosphere at their footpoints is heated by conduction from the corona.

Walker, A. B. C., Jr.↗

Prompt arrival of solar energetic particles from far eastern events - The role of large-scale interplanetary magnetic field structure

Intensity-time profiles of solar energetic particle enhancements generally show an asymmetry with respect to the heliolongitude of the associated solar event. Particles arrive promptly from events to the west of an observer because of good magnetic connection, whereas particle enhancements from poorly connected eastern source regions usually show much slower onsets. However, some 15 percent of eastern events do show prompt onsets. Two prompt particle enhancements associated with eastern solar events are studied using data from the Goddard Space Flight Center instruments on the ISEE 3 and IMP 8 spacecraft. In both events the prompt particle onset was observed when the spacecraft were in a postshock plasma region, apparently within a magnetic bottle. It is suggested that the magnetic bottle extended back to the sun and served as a channel for fast particle propagation to the spacecraft. Particles accelerated at an expanding coronal shock initiated by the eastern event could be injected onto field lines in the foot of the bottle.

Richardson, I. G.↗