Search NASA⌕ Search

SEARCH · Search NASA

Results for “mass attribute”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Low-Energy Radon Backgrounds from Electrode Grids in Dual-Phase Xenon TPCs

The dual-phase xenon time projection chamber (TPC) is a powerful technology to detect rare interactions such as scatters of dark matter particles on nuclei. In particular, the built-in gain of ionization signals in a dual-phase TPC makes it sensitive to events in the few-electron regime, as expected from low-mass dark matter interactions. The pursuit of this low-energy sensitivity through ionization-only signal detection has so far been hindered by excessive electron backgrounds observed across experiments. Much of this background is attributed to the plate-out of $^{222}$Rn decay chain isotopes on the high voltage electrode grid surfaces that span the full cross section of the TPC. This work presents a first-principle model constructed for this background, the predictions of which are consistent with data from the LZ and LUX experiments. We then discuss mitigation strategies of this background in future dual-phase TPCs and the possibility of applying this grid background model to ionization-only dark matter searches.

Akerib, D. S. [SLAC; KIPAC, Menlo Park]↗
DOE OSTI2021

Optimized Carbon Fiber Intermediate Development to Enable High-Volume Manufacturing of Lightweight Automotive Composites

The ongoing pursuit of improved fuel economy and reduced greenhouse gas emissions has resulted in sustained interest for lightweight materials technologies. In this context, carbon fiber composites have captured the imagination of automotive engineers due to the potential to achieve substantial mass reduction when compared to traditional steel construction. That stated, the use of carbon fiber composites in automotive has been limited for the most part to premium supercars and other derivative platforms. In these cases, manufacturing costs are less of an obstacle to implementation, and the performance benefits of carbon fiber have enabled production of structures offering more than 50% weight savings. In practice, translating these low-volume demonstrations onto high-volume vehicle platforms has remained challenging. This can be attributed to several factors, with the absence of suitable high throughput production methodologies being a key impediment. To date, structural, crash critical components have relied upon manufacturing techniques born out of the aerospace industry. This has created a disconnect between automotive production systems that are accustomed to manufacturing multiple parts per minute and the aerospace technologies that have cycle times in the order of hours. Consequently, the focus of this project is the development of manufacturing process technology for carbon fiber composites that can support a mainstream vehicle program at an assumed throughput of 100,000 vehicles per year. In practice, this translates to a part-to-part cycle time of less than 3 minutes. Project participation included contributions from a broad range of academic, industrial and national lab partners. The primary scope of work, being the development of new carbon fiber epoxy compounds that are stable at room temperature and suited to high throughput automated processing. For project management, the work streams were divided into six key areas, with the lead organization in parentheses. • Carbon fiber/epoxy materials formulation development and scale up (Dow) • Simulation of discontinuous near isotropic meso-structure intermediates (Purdue) • Simulation of mechanical performance of compression molded components (Purdue) • Meso-Scale morphological analysis and correlation with structural performance (UTK) • Paint and adhesion durability analysis (MSU) • Demonstrator part design, prototype production, and validation testing (Ford). The primary goal at the commencement of the project was development of a chopped carbon fiber sheet molding compound (SMC) that offered a three times improvement in tensile modulus over a comparable glass-based SMC. In addition to meeting mechanical performance targets, the resin kinetics were modified to achieve a processing cycle time of less than 3 minutes. Other critical-to-quality (CTQ) specifications were also stipulated to account for a broad range of materials and processing characteristics. To achieve the above, staff scientists at Dow Chemical created an extensive series of new epoxy blends for testing and validation. Throughout this development, a key challenge was attaining material performance goals without impacting processing behavior and paintability of finished components. The latter required a new internal mold release system being developed by Dow that was designed to complement the kinetics of the rapid cure epoxy. As a complement to work studies at the industrial partners, the teams from academia executed a series of analytical and experimental studies to investigate potential factors influencing CF-SMC performance. Unit cell models were developed to capture the meso-scale representations of the fiber matrix architecture. Results of this analysis and subsequent morphological investigations led to the design of a novel composite derivative comprising carbon fiber platelets embedded in an epoxy matrix; the platelet size and aspect ratio playing significant role in final composite properties. This approach was a departure from previous research in CF-SMC development whereby bulk filamentization or disassembly of the carbon fiber rovings had been considered the most effective means of achieving both fiber wet through and wet-out. As the course of the academia studies progressed, the aspect ratio of the fiber constituents was further optimized before finalizing material attributes and processing conditions. For the purposes of technology validation, the Ford team led a work stream devoted to the design, fabrication and testing of demonstration components. The carbon fiber SMC material has the potential to displace numerous stampings and castings on an automotive structure but ultimately vehicle closure applications were selected to showcase the abilities of the CF-SMC to achieve both mass reduction and business case for large complex structures. Using target properties established by the Dow staff scientists, the complete closure system for a full-size sedan decklid and a mid-size wagon liftgate were engineered. Prototypes for both applications were fabricated using production representative processing methods to allow for physical testing and performance validation of the CF-SMC structures. Following completion of a testing program that concluded with a FMVSS301 55 mph offset rear crash, the CF-SMC formulation was declared by the Ford team to have met all engineering requirements. To summarize, the joint development activities during this project led to significant technical breakthroughs and achievement of all milestones. The result was the development of a novel, tack-free carbon fiber molding compound that is suited to automated processing. This combined room temperature stability, fast cure kinetics, and internal mold release system facilitates cycle times that are conducive to high-volume production. The VORAFUSE M6400 successfully passed technology validation at Ford and is now eligible for consideration on future production commercial vehicle programs.

36 MATERIALS SCIENCE↗
DOE OSTI2020

High Temperature Oxidation Behavior of Aluminized Haynes 230

The effect of reactive air aluminizing (RAA) on the high-temperature oxidation behavior of the H230 superalloy is studied at 850 °C for 600 hours. Mass gain values are measured and microstructure is studied by XRD, SEM, and EDX. Post oxidation mass gain for the aluminized alloy is reduced compared to wrought alloy. A three-zone microstructure of diffusion coating is observed in RAA H230. Formation and growth of alumina scale during RAA process and oxidation is attributed to the complementary roles of ß-NiAl + ?'-Ni3Al phases in the composite coating.

Rashidi, S↗
DOE OSTI2021

R Coronae Borealis Star Evolution: Simulating 3D Merger Events to 1D Stellar Evolution Including Large-scale Nucleosynthesis

R Coronae Borealis (RCB) stars are rare hydrogen-deficient carbon-rich variable supergiants thought to be the result of dynamically unstable white dwarf mergers. In this article, we attempt to model RCB stars through all the relevant timescales by simulating a merger event in Octo-tiger, a 3D adaptive mesh refinement (AMR) hydrodynamics code, and mapping the post-merger object into MESA, a 1D stellar evolution code. We then post-process the nucleosynthesis on a much larger nuclear reaction network to study the enhancement of s-process elements. We present models that match observations or previous studies in most surface abundances, isotopic ratios, early evolution, and lifetimes. We also observe similar mixing behavior to previous modeling attempts that result in the partial He-burning products visible on the surface in observations. However, we do note that our subsolar models lack any enhancement in s-process elements, which we attribute to a lack of hydrogen in the envelope. We also find that the 16 O/ 18 O isotopic ratio is very sensitive to initial hydrogen abundance and increases outside of the acceptable range with a hydrogen mass fraction greater than 10 -4 .

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Isotopic mass effects of tritium-fueled high-performance TFTR supershots

An increase in total stored energy correlated with the addition of tritium fuel was observed in supershots during the TFTR DT campaign. This supershot regime had strikingly high, centrally peaked ion and electron temperatures, and the largest neutron emission rates observed in TFTR. This paper presents a study of the causes of this increase in stored energy in supershots. Twenty-six supershots have been recently reanalyzed with the TRANSP plasma analysis code. Early TRANSP simulations did not accurately match the measured magnitude and time evolutions of the neutron emission rates. This mismatch is attributed to neglecting apparent increases of trace amounts of heavy impurities during neutral beam injection. The new TRANSP runs were tuned to accommodate this and match the measured global neutron emission rates. These new runs also had improved fidelity in predicting the time histories and radial dependencies of measured DT neutron emission rates. That in turn adds confidence in the simulated thermal deuterium and tritium density profiles that are needed for calculating the average hydrogenic atomic mass profiles. Six subsets of these supershots had well matched toroidal field B tor , plasma current I p , flux geometry, and total injected neutral beam power. The mix of D and T beam ions was varied for different discharges. The magnitude of the increase of the thermal ion energy W i with added tritium was relatively small, and the total W tot increase is dominated by the increase in fast beam ions with T. Analyses at times before the occurrences of deleterious MHD instabilities yielded scaling of W tot with the volume-average isotopic mass consistent with previous publications. The relative fraction of fast energy ions is expected to be small in practical tokamak reactors. Thus the increase in stored energy W tot observed in TFTR supershots does not appear likely to be significantly helpful for producing useful fusion energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

The intrinsic alignment of red galaxies in DES Y1 redMaPPer galaxy clusters

ABSTRACT Clusters of galaxies trace the most non-linear peaks in the cosmic density field. The weak gravitational lensing of background galaxies by clusters can allow us to infer their masses. However, galaxies associated with the local environment of the cluster can also be intrinsically aligned due to the local tidal gradient, contaminating any cosmology derived from the lensing signal. We measure this intrinsic alignment in Dark Energy Survey (DES) Year 1 redMaPPer clusters. We find evidence of a non-zero mean radial alignment of galaxies within clusters between redshifts 0.1–0.7. We find a significant systematic in the measured ellipticities of cluster satellite galaxies that we attribute to the central galaxy flux and other intracluster light. We attempt to correct this signal, and fit a simple model for intrinsic alignment amplitude (AIA) to the measurement, finding AIA = 0.15 ± 0.04, when excluding data near the edge of the cluster. We find a significantly stronger alignment of the central galaxy with the cluster dark matter halo at low redshift and with higher richness and central galaxy absolute magnitude (proxies for cluster mass). This is an important demonstration of the ability of large photometric data sets like DES to provide direct constraints on the intrinsic alignment of galaxies within clusters. These measurements can inform improvements to small-scale modelling and simulation of the intrinsic alignment of galaxies to help improve the separation of the intrinsic alignment signal in weak lensing studies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Hierarchical Polyelemental Nanoparticles as Bifunctional Catalysts for Oxygen Evolution and Reduction Reactions

Efficient electrocatalysts are critical in various clean energy conversion and storage systems. Polyelemental nanomaterials are attractive as multi-functional catalysts due to their wide compositions and synergistic properties. However, controlled synthesis of polyelemental nanomaterials is difficult due to their complex composition. Herein, we present a one-step synthetic strategy to fabricate a hierarchical polyelemental nanomaterial, which contains ultrasmall precious metal nanoparticles (IrPt, ~5 nm) anchored on spinel-structure transition metal oxide nanoparticles. The polyelemental nanoparticles serve as excellent bifunctional catalysts for the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). The mass catalytic activity of the polyelemental nanoparticles is 7-times higher than that of Pt in ORR and 28-times that of Ir in OER at the same overpotentials, demonstrating the high activity of the bifunctional electrocatalyst. We attribute this outstanding performance to the controlled multiple elemental composition, mixed chemical states, and large electroactive surface area. The hierarchical nanostructure and polyelemental design of these nanoparticles offers a general and powerful alternative material for catalysis, solar cells, and more.

25 ENERGY STORAGE↗
DOE OSTI2021

Current Status and Future Directions of All-Solid-State Batteries with Lithium Metal Anodes, Sulfide Electrolytes, and Layered Ternary Oxide Cathodes

All-solid-state batteries (ASSBs) offer great promise as a next-generation energy storage technology with higher energy density, wider operating temperature range, and improved safety for electric vehicles. ASSBs employing lithium metal anodes (Li), sulfide-based solid-state electrolytes (SSE), and Ni-rich layered transition metal oxide cathodes (LiMO 2 , M = Ni, Mn, Co, Al) are particularly promising due to its superior electrochemical performance compared to other solid-electrolyte systems. However, the battery cycle life at high cathode mass loading and high current is still limited because the failure mechanism is not fully understood. Lithium dendrite growth at the anode or inside a solid electrolyte still represents as a serious risk of cell failure. Interfacial resistance increases attributed to electrolyte decomposition and interfacial void formation at both cathode–electrolyte and anode–electrolyte interfaces lead to gradual capacity fading. In this Review, we present the fundamental challenges and recent scientific understandings of each component in ASSBs. The novel diagnostic tools for these components, especially the interfaces buried under the surface that are often hard for characterization are mainly examined. Lastly, we offer a perspective for future research directions. We hope this Review will provide a timely snapshot of state-of-the-art research progress in ASSBs to accelerate the development of ASSBs.

25 ENERGY STORAGE↗
DOE OSTI2021

A Solution to Asymmetric Marangoni GTA Weld Behavior in a Dissimilar Chemistry Stainless Steel Joint [Slides]

Asymmetric and irregular weld morphology is an issue with the 9516 shipping container GTA weld. Observation of the weld puddle and cross sections showed the weld was biased toward the body side of the joint. This issue is attributed to a difference in the sulfur content and Marangoni fluid flow characteristics of the lid (150 ppm) and body (10 ppm) components of the weld joint. An additional contributing factor in this issue is the large difference in mass between the ½” thick lid and 1/8” thick body. A solution was developed comprised of a preliminary partial penetration weave pass across the joint intended to homogenize the sulfur content prior to the full penetration pass.

42 ENGINEERING↗
DOE OSTI2024

Unraveling iron oxides as abiotic catalysts of organic phosphorus recycling in soil and sediment matrices

In biogeochemical phosphorus cycling, iron oxide minerals are acknowledged as strong adsorbents of inorganic and organic phosphorus. Dephosphorylation of organic phosphorus is attributed only to biological processes, but iron oxides could also catalyze this reaction. Evidence of this abiotic catalysis has relied on monitoring products in solution, thereby ignoring iron oxides as both catalysts and adsorbents. Here we apply high-resolution mass spectrometry and X-ray absorption spectroscopy to characterize dissolved and particulate phosphorus species, respectively. In soil and sediment samples reacted with ribonucleotides, we uncover the abiotic production of particulate inorganic phosphate associated specifically with iron oxides. Reactions of various organic phosphorus compounds with the different minerals identified in the environmental samples reveal up to twenty-fold greater catalytic reactivities with iron oxides than with silicate and aluminosilicate minerals. Importantly, accounting for inorganic phosphate both in solution and mineral-bound, the dephosphorylation rates of iron oxides were within reported enzymatic rates in soils. Our findings thus imply a missing abiotic axiom for organic phosphorus mineralization in phosphorus cycling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Giant isotope effect on phonon dispersion and thermal conductivity in methylammonium lead iodide

Lead halide perovskites are strong candidates for high-performance low-cost photovoltaics, light emission, and detection applications. A hot-phonon bottleneck effect significantly extends the cooling time of hot charge carriers, which thermalize through carrier–optic phonon scattering, followed by optic phonon decay to acoustic phonons and finally thermal conduction. To understand these processes, we adjust the lattice dynamics independently of electronics by changing isotopes. We show that doubling the mass of hydrogen in methylammonium lead iodide by replacing protons with deuterons causes a large 20 to 50% softening of the longitudinal acoustic phonons near zone boundaries, reduces thermal conductivity by ~50%, and slows carrier relaxation kinetics. Phonon softening is attributed to anticrossing with the slowed libration modes of the deuterated molecules and the reduced thermal conductivity to lowered phonon velocities. Our results reveal how tuning the organic molecule dynamics enables control of phonons important to thermal conductivity and the hot-phonon bottleneck.

36 MATERIALS SCIENCE↗
DOE OSTI2025

High and Ultra-High Temperature Reaction Kinetics by Single Nanoparticle Mass Spectrometry

Methodology is presented for non-destructive, optically-detected single nanoparticle (NP) mass spectrometry, with the goal of extracting surface reaction kinetics for single NPs at high temperatures. Methods for determining the NP charge, mass, and temperature as a function of time are discussed, and the data are used to extract both the absolute kinetics for mass change, as well as the efficiencies of the surface processes that cause them. Factors that contribute to the uncertainties in absolute and relative mass determination, and in the resulting kinetic parameters, are discussed. The method allows the NP-to-NP variations in initial reactivity to be measured directly, along with the time evolution of reactivity resulting from NP structural/compositional changes that occur under reaction conditions. The strengths and limitations of single nanoparticle mass spectrometry as a high temperature surface kinetics tool are discussed in the context of sublimation and O2 oxidation kinetics experiments for single hafnium (Hf) NPs at temperatures ranging above 2400 K. The Hf oxidation kinetics are compared to analogous oxidation experiments for silicon, graphite, and carbon black NPs. In all four cases, the oxidation chemistry was dominated by processes that result in net mass loss, and the distinct mechanisms responsible are discussed. All four NPs also eventually passivated, i.e., the efficiencies for oxidative etching decreased by at least two orders of magnitude, relative to the initial efficiencies. Furthermore, the passivation mechanisms, which are quite different for carbon, compared to silicon or hafnium, are discussed. Carbon NP passivation is attributed to structural isomerization leading to fully coordinated, fullerene-like NP surfaces, while for silicon and hafnium, passivation results from delayed formation of an oxide layer, triggered by accumulation of oxygen in the NP sub-surface region.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Photochemical and Cloud and Aerosol Aqueous Contributions to Regionally-Emitted Shipping and Biogenic Non-Sea-Salt Sulfate Aerosol in Coastal California

Aerosol nonsea-salt sulfate (NSS sulfate) forms in the atmosphere by secondary reactions of emissions from marine phytoplankton and shipping, with gas-phase as well as cloud and aerosol aqueous reactions controlling production. Twelve months of Atmospheric Radiation Measurements (ARM) during the Eastern Pacific Cloud Aerosol Precipitation Experiment (EPCAPE) at Scripps Pier in La Jolla, California, showed the highest NSS sulfate mass concentrations occurred for the northwesterly back-trajectories over 64% of the year, with an average of 0.90 μg/m 3 that contributed 76% of annual NSS sulfate concentration. Multiple Linear Regression (MLR) and a refractory black carbon tracer method attributed 76–80% of the regionally emitted sulfur dioxide (SO 2 ) sources of submicron NSS sulfate to marine biogenic emissions and 20–24% to shipping emissions. MLR for oxidation processes explained 21% of the variability with Downwelling Shortwave Radiation (DSW) driving photochemical reactions to account for 34% of annual regional sulfate production, Upwind Cloud Vertical Fraction (UCVF) controlling cloud-associated oxidation to account for 29%, and relative humidity (RH) describing aerosol-phase oxidation to account for 36%. NSS sulfate was correlated moderately to UCVF during April-June and August but to RH in October-January. These findings show the apportionment of SO 2 emissions to biogenic and shipping sources and provide observational constraints for the mechanisms for sulfate production from SO 2 in the atmosphere.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Transactional Knowledge Graph Generation To Model Adversarial Activities

A Knowledge Graph (KG) is a formal and structured representation of facts, relationships, and semantic descriptions of a set of entities. Traditionally, KGs are used to describe metadata about entities and to provide additional context to target application results. Many real-world domains also involve temporal interactions between entities in addition to the metadata data. Modeling these attributed transactions is a critical requirement when using KGs in complex real-world applications. Modeling adversarial activities is one such application that develops methodology and tools to produce realistic large-scale background activity graphs that include embedded Weapons of Mass Destruction (WMD) activity patterns. We present a novel platform for constructing a transactional knowledge graph from a diverse set of sources. We present the core components and architecture of the framework, and a use case for generating a background knowledge graph and WMD activity template to evaluate network alignment and subgraph matching algorithms.

Purohit, Sumit↗
DOE OSTI2024

Production rate calibration for cosmogenic 10 Be in pyroxene by applying a rapid fusion method to 10 Be-saturated samples from the Transantarctic Mountains, Antarctica

Measurements of multiple cosmogenic nuclides in a single sample are valuable for various applications of cosmogenic nuclide exposure dating and allow for correcting exposure ages for surface weathering and erosion and establishing exposure–burial history. Here we provide advances in the measurement of cosmogenic 10 Be in pyroxene and constraints on the production rate that provide new opportunities for measurements of multi-nuclide systems, such as 10 Be/ 3 He, in pyroxene-bearing samples. We extracted and measured cosmogenic 10 Be in pyroxene from two sets of Ferrar Dolerite samples collected from the Transantarctic Mountains in Antarctica. One set of samples has 10 Be concentrations close to saturation, which allows for the production rate calibration of 10 Be in pyroxene by assuming production–decay equilibrium. The other set of samples, which has a more recent exposure history, is used to determine if a rapid fusion method can be successfully applied to samples with Holocene to Last Glacial Maximum exposure ages. From measured 10 Be concentrations in the near-saturation sample set we find the production rate of 10 Be in pyroxene to be 3.74 ± 0.10 atoms g -1 yr -1 , which is consistent with 10 Be/ 3 He paired nuclide ratios from samples assumed to have simple exposure. Given the high 10 Be concentration measured in this sample set, a sample mass of ~ 0.5 g of pyroxene is sufficient for the extraction of cosmogenic 10 Be from pyroxene using a rapid fusion method. However, for the set of samples that have low 10 Be concentrations, measured concentrations were higher than expected. We attribute spuriously high 10 Be concentrations to failure in removing all meteoric 10 Be and/or a highly variable and poorly quantified procedural blank background correction.

58 GEOSCIENCES↗
DOE OSTI2022

Host Dark Matter Halos of SDSS Red and Blue Quasars: No Significant Difference in Large-scale Environment

The observed optical colors of quasars are generally interpreted in one of two frameworks: unified models that attribute the color to the random orientation of the accretion disk along the line of sight, and evolutionary models that invoke connections between quasar systems and their environments. We test these schemas by probing the dark matter halo environments of optically selected quasars as a function of g – i optical color by measuring the two-point correlation functions of ~0.34 million eBOSS quasars as well as the gravitational deflection of cosmic microwave background photons around ~0.66 million XDQSO photometric quasar candidates. We do not detect a trend of halo bias with optical color through either analysis, finding that optically selected quasars at 0.8 < z < 2.2 occupy halos of characteristic mass M h ~ 3 × 10 12 h –1 M ⊙ regardless of their color. This result implies that a quasar's large-scale halo environment is not strongly connected to its observed optical color. We also confirm the findings of fundamental differences in the radio properties of red and blue quasars by stacking 1.4 GHz FIRST images at their positions, suggesting the observed differences cannot be attributed to orientation. Instead, the differences between red and blue quasars likely arise on nuclear-galactic scales, perhaps owing to reddening by a nuclear dusty wind. Finally, we show that optically selected quasars' halo environments are also independent of their r – W2 optical–infrared colors, while previous work has suggested that mid-infrared-selected obscured quasars occupy more massive halos. We discuss the implications of this result for models of quasar and galaxy coevolution.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Enhanced Electrocatalytic Hydrogen Evolution Activity in Single-Atom Pt-Decorated VS 2 Nanosheets

Enhancing catalytic activity by decorating noble metals in catalysts provides an opportunity for promoting the electrocatalytic hydrogen evolution reaction (HER) application. However, there are few systematic studies on regulating the structures of noble metals in catalytic materials and investigating their influence on HER. Herein, Pt catalysts with different structures including single atoms (SAs), clusters, and nanoparticles well-controllably anchored on VS 2 nanosheets through a cost-effective optothermal method are reported, and their HER performance is studied. The most efficient Pt-decorated VS 2 catalyst (with both Pt SAs and clusters) delivers an overpotential of 77 mV at 10 mA cm –2 , close to that of Pt/C (48 mV). However, the optimal mass activity of Pt (normalizing to Pt content) is obtained from only SA Pt-decorated VS 2 (i.e., 22.88 A mg Pt –1 at 200 mV) and is 12 times greater than that of the Pt/C (1.87 A mg Pt –1 ), attributed to the greatly enhanced Pt utilization. Additionally, the theoretical simulations reveal that Pt SA decoration makes the adsorption free energy of H* closer to the thermoneutral value and improves the charge-transfer kinetics, significantly enhancing HER activity. Furthermore, this work offers a pathway to prepare the desired catalyst based on synergy of Pt structures and VS 2 and reveals the intrinsic mechanism for enhancing catalytic activity, which is important for HER applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Impact of Tree Age and Anatomical Fraction on Forest Residue Pyrolysis and Hydrotreating

Utilization of cost-advantaged biomass and waste resources to produce clean, domestic biofuels will be a key factor in decarbonizing transportation in the United States. This study investigates how the distribution of anatomical fractions (stem wood, bark, needles, branches) from pine forest residues of different ages impacts pyrolysis and hydrotreating processes, including product composition, carbon efficiency, economics, and overall sustainability. Commercially sourced 13- and 23-year-old loblolly pine residues were chosen to represent available resources; whole tree thinnings, and tops and branches from merchantable timber, respectively. Detailed characterization of the residue samples, product distributions, bio-oil, char, and gas characterization data are presented for 13 experiments, including the individual fractions, blends, and air-classified samples to reduce ash content. Pyrolysis mass balances averaged 97 +/- 3%. As expected, bio-oil yields were lower for the bark, needles, and blends with high proportions of these (53-56% dry basis), and highest for the debarked stem wood (67-71% dry basis). Lower yields were attributed to the high ash content of the needles, but also to the high lignin content in the bark (>50%), which is hypothesized to have led to increased char formation during pyrolysis. Higher-oil yield was generally correlated with total volatiles, hydrogen, oxygen, glucan, and mannan; somewhat correlated with xylan and acetyl content; and negatively correlated with total carbon, fixed carbon, nitrogen, sulfur, and extractives. Air classification of the residues was effective in reducing ash content (1.5% to 0.64%), extractives (~7% to 2%), and sulfur (0.04% to 0.02%), resulting in a small increase in yield, a significant increase in the GC-detectable proportion of oil (27% to 34%) and a net economic benefit. These experimental results were used to conduct technoeconomic and life cycle analyses, which are also summarized here.

biofuels↗