SEARCH · Search NASA
Results for “metal aggregation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The Role of Secondary Particle Structures in Surface Phase Transitions of Ni-Rich Cathodes
Nanometer-thick reconstruction layers on layered cathode surfaces have been widely observed on both pristine and cycled materials. However, the mechanisms of reconstruction and the role that these structures play in electrochemical performance are not fully understood. From a crystallographic perspective, such surface reconstruction layers result from cation site-mixing between Li and transition-metal ions, but it remains far from clear as to what the critical factors are that control such cation mixing for various cathode chemistries. In this paper, we report observations on surface transformations during cycling of a Ni-rich cathode-oxide that are governed by direct contact with the liquid electrolyte. Specifically, within a secondary particle, the three-dimensional hierarchical aggregate of primary particles leads to the formation of grain boundaries of different characteristics, including open grain boundaries that allow the permeation of liquid electrolyte, and closed grain boundaries that exclude liquid electrolyte penetration. Upon battery cycling, surfaces in direct contact with the liquid electrolyte showed a surface reconstruction layer while the surfaces that did not have contact with the electrolyte showed no such reconstructions. In addition, the critical role of oxygen in reconstruction of grain boundaries is demonstrated, and the unexpected oxygen depletion at twin boundaries result in severe phase transitions. The present work provides further insights into phase transitions at solid-solid and solid-liquid interfaces within secondary cathode particles and suggests strategies for mitigating surface/interfacial degradation.
Dislocation-Activated Low Platinum-Loaded PtCu Nanoparticles Welded onto the Substrate for Practical Acidic Hydrogen Generation
Although transition metal (M) alloying with platinum (Pt) is a promising approach to reduce the Pt dosage required in the hydrogen evolution reaction (HER), the catalytic activity and durability of PtM alloy are often unsatisfactory for acidic HER, especially at high currents, due to a reduced number of highly active sites (Pt) at the atomic level and challenges in stabilizing them to prevent detachment and aggregation. Herein, we report a robust functional structure integrated electrode (D-PtCu/CF) with abundant edge dislocations and very low platinum content (0.1 mg cm -2 ) to achieve high activity and stability in acidic HER within a proton exchange membrane water electrolysis cell (PEMWE). D-PtCu/CF exhibits high Pt mass activity (10.28 A mg Pt -1 ) and excellent operational stability (negligible decay after 200 h). X-ray absorption spectroscopy and in situ electrochemical experiments reveal that the lattice distortion caused by edge dislocations in PtCu mainly affects Pt atoms by compressing strain, reducing their ability to adsorb H. At the same time, Cu atoms are subjected to tensile strain, enhancing the bonding between Cu and H. Therefore, edge dislocations not only improve the intrinsic catalytic activity of Pt atoms but also increase the number of active sites (Cu) available for hydrogen adsorption, which synergistically accelerates the kinetics of the HER reaction. Finally, the PEMWE employing the D-PtCu/CF catalytic electrode can operate stably for 100 h at an industrial-level current density of 500 mA cm -2 with 1.63 V.
Effective Storage of Electrons in Water by the Formation of Highly Reduced Polyoxometalate Clusters
Aqueous solutions of polyoxometalates (POMs) have been shown to have potential as high-capacity energy storage materials due to their potential for multi-electron redox processes, yet the mechanism of reduction and practical limits are currently unknown. Herein, we explore the mechanism of multi-electron redox processes that allow the highly reduced POM clusters of the form {MO 3 } y to absorb y electrons in aqueous solution, focusing mechanistically on the Wells-Dawson structure X 6 [P 2 W 18 O 62 ], which comprises 18 metal centers and can uptake up to 18 electrons reversibly (y = 18) per cluster in aqueous solution when the countercations are lithium. This unconventional redox activity is rationalized by density functional theory, molecular dynamics simulations, UV-vis, electron paramagnetic resonance spectroscopy, and small-angle X-ray scattering spectra. These data point to a new phenomenon showing that cluster protonation and aggregation allow the formation of highly electron-rich meta-stable systems in aqueous solution, which produce H 2 when the solution is diluted. Finally, we show that this understanding is transferrable to other salts of [P 5 W 30 O 110 ] 15- and [P 8 W 48 O 184 ] 40- anions, which can be charged to 23 and 27 electrons per cluster, respectively.
Subventricular Accumulation of Cu in the Aging Mouse Brain Does Not Associate with Anticipated Increases in Markers of Oxidative Stress
Natural aging is associated with mild memory loss and cognitive decline, and age is the greatest risk factor for neurodegenerative diseases, such as Alzheimer’s disease. There is substantial evidence that oxidative stress is a major contributor to both natural aging and neurodegenerative disease, and coincidently, levels of redox active metals such as Fe and Cu are known to be elevated later in life. Recently, a pronounced age-related increase in Cu content has been reported to occur in mice and rats around a vital regulatory brain region, the subventricular zone of lateral ventricles. In our study herein, we have characterized lateral ventricle Cu content in a unique murine model of accelerated aging, senescence accelerated mouse-prone 8 (SAMP8) mice. Our results confirm an age-related increase in ventricle Cu content, consistent with the studies by others in wild-type mice and rats. Specifically, we observed Cu content to increase over the time frame 1 to 5 months and 5 to 9 months, but interestingly, no significant increase occurred between 9 and 12 months (although brain Cu content at 12 months was significantly elevated relative to 1 and 5 month-old animals). Despite the magnitude of Cu increase observed within the cells that comprise the subventricular zone of lateral ventricles (average 3 mM Cu, with isolated subcellular concentrations of 17 mM), we did not detect spectroscopic markers of thiol oxidation, protein aggregation, or lipid oxidation. The lack of evidence for oxidative stress in ex vivo animal tissue is in contrast to in vitro studies demonstrating that thiol, protein, and lipid oxidation is pronounced at these Cu concentrations. We suggest that our findings most likely indicate that the Cu ions in this brain region are sequestered in an unreactive form, possibly extended chains of Cu-thiolate complexes, which do not readily redox cycle in the aqueous cytosol. In conclusion, these results also appear to partially challenge the long-held view that age-related increases in brain metal content drive oxidative stress as we did not observe a concomitant association between age-related Cu increase and markers of oxidative stress, nor did we observe a net increase in Cu content between mice aged 9 and 12 months.
Mechanisms of Metal Additive-Induced Ordering During SNIPS Membrane Formation
Isoporous membranes can be fabricated by combining self-assembly with nonsolvent induced phase separation (SNIPS) using an amphiphilic block copolymer like polystyrene-b-poly(4-vinylpyridine) (SV). Poly(4-vinylpyridine) (V) is known to complex with metal salts, which are hypothesized to stabilize solution ordering and preserve structure during casting. We explored how the molar ratio of metal additive to the poly(4-vinylpyridine) block affected the final membrane morphology via scanning electron microscopy (SEM). Dynamic light scattering (DLS), small-angle X-ray scattering (SAXS), and in situ grazing-incidence SAXS were used to track changes in solution ordering and chain conformation as a function of the molar ratio of the additive to the V block. Additives induced aggregation, promoted the formation of more compact conformations in solution, and facilitated micelle ordering onto lattices at optimal ratios. Furthermore, these experimental results were supported by random phase approximation calculations, which helped explain how the thermodynamic order–disorder transition shifts with additive binding strength. Stronger additive–polymer interactions reduced the block copolymer volume fraction required for ordering in solution, allowing ordered domains to form at lower polymer concentrations.
Adsorption and Catalytic Activity of Gold Nanoparticles in Mesoporous Silica: Effect of Pore Size and Dispersion Salinity
The assembled state of nanoparticles (NPs) within porous matrices plays a governing role in directing their biological, electronic, and catalytic properties. However, the effects of the spatial confinement and environmental factors, such as salinity, on the NP assemblies within the pores are poorly understood. In this study, we use adsorption isotherms, spectrophotometry, and small-angle neutron scattering to develop a better understanding of the effect of spatial confinement on the assembled state and catalytic performance of gold (Au) NPs in propylamine-functionalized SBA-15 and MCM-41 mesoporous silica materials (mSiO 2 ). We carry out a detailed investigation of the effect of pore diameter and ionic strength on the packing and spatial distribution of AuNPs within mSiO 2 to get a comprehensive insight into the structure, functioning, and activity of these NPs. We demonstrate the ability of the adsorbed AuNPs to withstand aggregation under high salinity conditions. We attribute the observed preservation of the adsorbed state of AuNPs to the strong electrostatic attraction between oppositely charged pore walls and AuNPs. The preservation of the structure allows the AuNPs to retain their catalytic activity for a model reaction in high salinity aqueous solution, here, the reduction of p-nitrophenol to p-aminophenol, which otherwise is significantly diminished due to bulk aggregation of the AuNPs. This fundamental study demonstrates the critical role of confinement and dispersion salinity on the adsorption and catalytic performance of NPs.
Quantized Grain Boundary States Promote Nanoparticle Alignment During Imperfect Oriented Attachment
Oriented attachment (OA) has become a well-recognized mechanism for the growth of metal, ceramic, and biomineral crystals. While many computational and experimental studies of OA have shown that particles can attach with some misorientation then rotate to remove adjoining grain boundaries, the underlying atomistic pathways for this “Imperfect OA” process remain the subject of debate. In this paper, molecular dynamics and in situ TEM were used to probe the crystallographic evolution of up to 30 gold and copper nanoparticles during aggregation. It was found that Imperfect OA occurs because (1) grain boundaries become quantized when their size is comparable to the separation between constituent dislocations and (2) kinetic barriers associated with the glide of grain boundary dislocations are small. In support of these findings, TEM experiments show the formation of a single crystal aggregate after annealing 9 initially misoriented, agglomerated particles with evidence of dislocation slip and twin formation during particle/grain alignment. These observations motivate future work on assembled nanocrystals with tailored defects and call for a revision of Read-Shockley models for grain boundary energies in nanocrystalline materials.
Bridging Aromatic/Antiaromatic Units: Recent Advances in Aromaticity and Antiaromaticity in Main-group and Transition-Metal Clusters from Bonding and Magnetic Analyses
Synthetic exploration and theoretical characterization of metal clusters are actively developing branches of modern inorganic chemistry. Advances in these areas constantly expand the rich structural diversity of viable species, allowing a detailed study of the fundamental characteristics of bench-stable compounds. In this minireview, we summarize recent achievements in synthesis and computational analyses of main-group and heterometallic clusters containing multiple aromatic/antiaromatic units. These systems range from bare clusters to ligand-decorated aggregates, providing a fundamental understanding of the aromaticity and antiaromaticity concepts in species exhibiting unprecedented shapes and composition. The review gives a comprehensive summary of bonding and magnetic response properties of such systems deciphered from the Adaptive Natural Density Partitioning (AdNDP) approach and induced magnetic field analyses.
Resolving Configurational Disorder for Impurities in a Low-Entropy Phase
Hematite (α-Fe 2 O 3 ) exerts a strong control over the transport of minor but critical metals in the environment and is used in multiple industrial applications; the photocatalysis community has explored the properties of hematite nanoparticles over a wide range of transition metal dopants. Nonetheless, simplistic assumptions are used to rationalize the local coordination environment of impurities in hematite. Here, we use ab initio molecular dynamics (AIMD)-guided structural analysis to model the extended X-ray absorption fine structure (EXAFS) of Cu 2+ - and Zn 2+ -doped hematite nanoparticles. Specific defect–impurity associations were identified, and the local coordination environments of Cu and Zn both displayed considerable configurational disorder that, in aggregate, approached Jahn–Teller-like distortion for Cu but, in contrast, maintained hematite-like symmetry for Zn. This study highlights the role of defects in accommodating impurities in a nominally low-entropy phase and the limits to traditional shell-by-shell fitting of EXAFS for dopants/impurities in unprecedented bonding environments.
On the provenance of GEMS, a quarter century post discovery
The provenance of GEMS (glass with embedded metal and sulfides) in cometary type interplanetary dust particles is investigated using analytical scanning transmission electron microscopy and secondary ion mass spectrometry. We review the current state of knowledge and closely examine the densities, elemental compositions and distributions, iron oxidation states, and isotopic compositions of a subset of GEMS in chondritic porous interplanetary dust. We find that GEMS are underdense with estimated densities that are 35–65% of compositionally equivalent crystalline aggregates. GEMS low densities result in a lower contribution to the bulk compositions of IDPs than has been assumed based on their volume fraction. We also find that element/Si ratios, assumed to be primary (indigenous), are instead perturbed by contamination and secondary alteration, including pulse heating during atmospheric entry. Fe in pyrrhotite inclusions was oxidized and Mg, S, Ca, and Fe were depleted relative to lithophile Al and Si, resulting in reduction in element/Si ratios. Because they trap outgassing elements, Fe-rich oxide rims that formed on the surface of GEMS are serendipitous “witness plates” to the changes in composition that accompany atmospheric entry. As a result of alteration, GEMS elemental compositions cannot reliably inform about their provenance. Except for highly anomalous oxygen isotope ratios measured in some large GEMS grains that indicate a contribution from circumstellar dust, oxygen isotope compositions are generally poor indicators of provenance. Prior work indicates that most GEMS fall close to the terrestrial oxygen isotope composition, which, however, does not exclude a presolar interstellar origin. Nitrogen isotopic compositions are more diagnostic. Elevated 15 N/ 14 N ratios indicate that GEMS accreted in conjunction with formation of organic matter by ion–molecule reactions in a cold (<50 K) presolar environment like the extreme outer nebula or interstellar medium. Considering all observations, we conclude that GEMS are most likely processed interstellar silicates.
Dimolybdenum Paddlewheel Complexes with Cation Binding Sites as Electrolyte Additives to Manipulate the Solid-Electrolyte Interphase at Lithium Metal Anodes
The use of electrolyte additives at millimolar loadings to control the surface chemistry of lithium metal anodes (LMAs) is a leading strategy to improve lithium metal batteries and promote electrosynthetic reactions. Whereas previous studies employed either inorganic or organic additives, in this study, we report the first organometallic additive, Mo 2 (mea) 4 [1, mea = 2-(2-methoxyethoxy)acetate], a dimolybdenum paddlewheel complex that is stable under Li plating conditions and features cation binding sites in the second coordination sphere that promote reversible Li + coordination. Binding of Li + ions to 1 induces immobilization of cationically charged aggregates (or products thereof) into the solid electrolyte interphase (SEI), imparting multiple beneficial functions. The modified SEI was found to protect the LMA against parasitic side reactions, produce modest but measurable improvements to Li plating properties (e.g., overpotential, surface structure, and Coulombic efficiency), and improve interfacial charge transport properties. Furthermore, the most notable benefit to battery cycling performance appears in calendar aging tests, which show that the presence of the additive protects the LMA from parasitic side reactions that would otherwise decrease overall cell cycling efficiency over time. Collectively, these data disclose a tactic for designing electrolyte additives using principles of organometallic synthesis.
Ionic Liquid Sheath Stabilizes Atomically Dispersed Reduced Graphene Aerogel‐Supported Iridium Complexes during Ethylene Hydrogenation Catalysis
Abstract An atomically dispersed reduced graphene aerogel (rGA)‐supported iridium catalyst having reactive ethylene ligands was synthesized at an iridium loading of 9.9 wt % and coated with an ionic liquid, 1‐ethyl‐3‐methylimidazolium acetate ([EMIM][OAc]). Continuous‐scan X‐ray absorption spectra demonstrated that the iridium remained site‐isolated in flowing equimolar C 2 H 4 and H 2 during a temperature ramp to 100 °C. The data further showed the lack of detectable iridium aggregation when the feed was H 2 ‐rich or even pure H 2 at 100 °C. An Arrhenius plot determined for ethylene hydrogenation catalysis with the sample in flowing equimolar ethylene and hydrogen showed no variation in the apparent activation energy at temperatures up to 100 °C, confirming that the active sites remained intact at the higher temperatures. The results point to opportunities for overcoming the stability limitations of atomically dispersed supported noble metal catalysts by choice of electron‐donor supports and ionic liquid sheaths.
Crystallization of a Neptunyl Oxalate Hydrate from Solutions Containing Np V and the Uranyl Peroxide Nanocluster U 60 Ox 30
Uranyl peroxide nanoclusters are an evolving family of materials with potential applications throughout the nuclear fuel cycle. While several studies have investigated their interactions with alkali and alkaline earth metals, no studies have probed their interactions with the actinide elements. This work describes a system containing U 60 Ox 30 , [((UO 2 )(O 2 )) 60 (C 2 O 4 ) 30 ] 60- , and neptunium(V) as a function of neptunium concentration. Ultra-small and small angle X-ray scattering were used to observe these interactions in the aqueous phase, and X-ray diffraction was used to observe solid products. The results show that neptunium induces aggregation of U 60 Ox 30 when the neptunium concentration is ≤ 10 mM, whereas (NpO 2 ) 2 C 2 O 4 ·6H 2 O(cr) and studtite ultimately form at 15–25 mM neptunium. Finally, the latter result suggests that neptunium coordinates with the bridging oxalate ligands in U 60 Ox 30 , leaving metastable uranyl peroxide species in solution, and is an important finding given the potential application of uranyl peroxide nanoclusters in the recycling of used nuclear fuel.
Comparison of Single-Ion Conducting Polymer Gel Electrolytes for Sodium, Potassium, and Calcium Batteries: Influence of Polymer Chemistry, Cation Identity, Charge Density, and Solvent on Conductivity
From the standpoint of material diversification and sustainability, the development of so-called “beyond lithium-ion” battery chemistries is important for the future of energy storage. Na, K, and Ca are promising as the basis for battery chemistries in that these elements are highly abundant. Here, a series of single-ion conducting polymer electrolytes (SIPEs) for Na, K, and Ca batteries are synthesized and investigated. The two classes of metal cation neutralized SIPEs compared are crosslinked poly(ethylene glycol) dimethacrylate-x-styrene sulfonate (PEGDMA-SS) and poly(tetrahydrofuran) diacrylate-x-4-styrenesulfonyl (trifluoromethylsulfonyl)imide (PTHFDA-STFSI); three cation types, three charge densities, and four swelling states are examined. The impact on conductivity of all of these parameters is studied, and in conjunction with small angle X-ray scattering (SAXS), it is found that promoting ion dissociation and preventing the formation of dense ionic aggregates facilitates ion transport. These results indicate many of the lessons learned from the Li SIPE literature can be translated to beyond Li chemistries. At 25 °C, the best performing Na/K and Ca exchanged polymers yield active cation conductivity on the order of 10 –4 S/cm and 10 –6 S/cm, respectively, for ethylene carbonate:propylene carbonate gelled SIPEs, and 10 –5 S/cm and 10 –7 S/cm, respectively, for glyme gelled SIPEs.
Distance makes a difference in crystalline photoluminescence
Crystallization-induced photoluminescence weakening was recently revealed in ultrasmall metal nanoparticles. However, the fundamentals of the phenomenon are not understood yet. By obtaining conformational isomer crystals of gold nanoclusters, we investigate crystallization-induced photoluminescence weakening and reveal that the shortening of interparticle distance decreases photoluminescence, which is further supported by high-pressure photoluminescence experiments. To interpret this, we propose a distance-dependent non-radiative transfer model of excitation electrons and support it with additional theoretical and experimental results. This model can also explain both aggregation-induced quenching and aggregation-induced emission phenomena. This work improves our understanding of aggregated-state photoluminescence, contributes to the concept of conformational isomerism in nanoclusters, and demonstrates the utility of high pressure studies in nanochemistry.
Origin, nature, and the dynamic behavior of nanoscale vacancy clusters in Ni-rich layered oxide cathodes
Oxygen and transition metal (TM) vacancies in transition metal oxides (TMOs) play an important role in materials functionalities. For TMO cathodes of Li-ion batteries, vacancies can be introduced, either deliberately or inevitably, during materials synthesis or upon electrochemical cycling. Effects of vacancies on the electrochemical properties of cathodes critically depend on the dynamic characteristics of vacancies during the battery cycling. However, a fundamental understanding of such characteristics in the layer structured cathode remains elusive. Here, using scanning transmission electron microscopy (STEM), we reveal a cycling-induced aggregation behavior of oxygen and TM vacancies in a Ni-rich layer structured cathode of secondary particles. We discover that during the initial charging, vacancies aggregate to form visible vacancy-rich nanoregions (vacancy clusters) firstly at the outer layer of the secondary particle, and then the vacancy-cluster populated region extends to the inner part of particle upon fully charged. The spatial distinction of preferential nucleation of vacancy clusters at the outer layer indicates that the vacancy migration and clustering is associated with Li migration flux, which is larger at the outer layer, as all the Li from the inner part has to go through the outer layer. With extended cycling (> 50), these vacancy clusters become immobilized. We further reveal that the generation of these vacancy clusters is correlated to the material-synthesis conditions. Our findings solve a long-standing puzzle on the origin, nature, and behavior of the commonly visible vacancy clusters in the NMC cathode, providing insights on correlation between properties and dynamic behaviors of atomic-scale defects in layered oxide cathodes.
Detecting Cage Crossing and Filling Clusters of Magnesium and Carbon Atoms in Zeolite SSZ-13 with Atom Probe Tomography
The conversion of methanol to valuable hydrocarbon molecules is of great commercial interest, as the process serves as a sustainable alternative for the production of, for instance, the base chemicals for plastics. The reaction is catalyzed by zeolite materials. By the introduction of magnesium as a cationic metal, the properties of the zeolite, and thereby the catalytic performance, are changed. With atom probe tomography (APT), nanoscale relations within zeolite materials can be revealed: i.e., crucial information for a fundamental mechanistic understanding. We show that magnesium forms clusters within the cages of zeolite SSZ-13, while the framework elements are homogeneously distributed. These clusters of just a few nanometers were analyzed and visualized in 3-D. Magnesium atoms seem to initially be directed to the aluminum sites, after which they aggregate and fill one or two cages in the zeolite SSZ-13 structure. The presence of magnesium in zeolite SSZ-13 increases the lifetime as well as the propylene selectivity. By using operando UV–vis spectroscopy and X-ray diffraction techniques, we are able to show that these findings are related to the suppression of aromatic intermediate products, while maintaining the formation of polyaromatic compounds. Further nanoscale analysis of the spent catalysts showed indications of magnesium redistribution after catalysis. Unlike zeolite H-SSZ-13, for which only a homogeneous distribution of carbon was found, carbon can be either homogeneously or heterogeneously distributed within zeolite Mg-SSZ-13 crystals as the magnesium decreases the coking rate. Carbon clusters were isolated, visualized, and analyzed and were assumed to be polyaromatic compounds. Small one-cage-filling polyaromatic compounds were identified; furthermore, large-cage-crossing aromatic molecules were found by isolating large coke clusters, demonstrating the unique coking mechanism in zeolite SSZ-13. Short-length-scale evidence for the formation of polyaromatic compounds at acid sites is discovered, as clear nanoscale relations between aluminum and carbon atoms exist.