Search NASA⌕ Search

SEARCH · Search NASA

Results for “model accuracy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Investigation of Longitudinal Aero-Propulsive Interactions of a Small Quadrotor Unmanned Aircraft System

Aerodynamic propulsive and airframe interactions significantly influence the forces and moments of multirotor vehicles. This paper presents recent results studying the influence of these effects on a small quadrotor vehicle in hover and forward flight. Aerodynamic interaction model development was explored utilizing system identification tools and incorporated into a previously developed NASA quadrotor flight dynamic simulation. The aerodynamic interaction model improved accuracy of the simulation in comparison to free-flight and static wind tunnel results. Comparisons between models of different fidelity were completed to demonstrate the effects of aerodynamic interaction on model accuracy and provide recommendations for modelling requirements.

George Altamirano↗
NASA NTRS2019

Modelling above-ground biomass stock over Norway using national forest inventory data with ArcticDEM and Sentinel-2 data

Boreal forests constitute a large portion of the global forest area, yet they are undersampled through field surveys, and only a few remotely sensed data sources provide structural information wall-to-wall throughout the boreal domain. ArcticDEM is a collection of high-resolution (2 m) space-borne stereogrammetric digital surface models (DSM) covering the entire land area north of 60° of latitude. The free-availability of ArcticDEM data offers new possibilities for aboveground biomass mapping (AGB) across boreal forests, and thus it is necessary to evaluate the potential for these data to map AGB over alternative open-data sources (i.e., Sentinel-2). This study was performed over the entire land area of Norway north of 60° of latitude, and the Norwegian national forest inventory (NFI) was used as a source of field data composed of accurately geolocated field plots (n=7710) systematically distributed across the study area. Separate random forest models were fitted using NFI data, and corresponding remotely sensed data consisting of either: i) a canopy height model (ArcticCHM) obtained by subtracting a high-quality digital terrain model (DTM) from the ArcticDEM DSM height values, ii) Sentinel-2 (S2), or iii) a combination of the two (ArcticCHM+S2). Furthermore, we assessed the effect of the forest- and terrain-specific factors on the models’ predictive accuracy. The best model (,i.e., ArcticCHM+S2) explained nearly 60% of the variance of the training set, which translated in the largest accuracy in terms of root mean square error (RMSE=41.4 t/ha). This result highlights the synergy between 3D and multispectral data in AGB modelling. Furthermore, this study showed that despite the importance of ArcticCHM variables, the S2 model performed slightly better than ArcticCHM model. This finding highlights some of the limitations of ArcticDEM, which, despite the unprecedented spatial resolution, is highly heterogeneous due to the blending of multiple acquisitions across different years and seasons. We found that both forest- and terrain-specific characteristics affected the uncertainty of the ArcticCHM+S2 model and concluded that the combined use of ArcticCHM and Sentinel-2 represents a viable solution for AGB mapping across boreal forests. The synergy between the two data sources allowed for a reduction of the saturation effects typical of multispectral data while ensuring the spatial consistency in the output predictions due to the removal of artifacts and data voids present in ArcticCHM data. While the main contribution of this study is to provide the first evidence of the best-case-scenario (i.e., availability of accurate terrain models) that ArcticDEM data can provide for large-scale AGB modelling, it remains critically important for other studies to investigate how ArcticDEM may be used in areas where no DTMs are available as is the case for large portions of the boreal zone.

space-borne imagery↗
NASA NTRS1995

Accelerated line-by-line calculation of spectral absorption coefficients with high numerical accuracy

To model radiative transfer through the atmosphere with high accuracy, one must resort to the calculation of spectral absorption coefficients on a line-by-line basis. The calculation of these coefficients is computationally expensive for three reasons: (1) thousands of spectral lines can contribute to absorption at a single frequency; (2) the tails of spectral line profiles are long (i.e., a given line can contribute to absorption over a wide range of frequencies); and (3) the sampling frequencies at which monochromatic radiances are to be calculated must be spaced sufficiently close together to resolve the thinnest lines of interest (e.g., those that arise in the stratosphere). We have developed a new algorithm to accelerate the calculation of spectral absorption coefficients while retaining high numerical accuracy.

Sparks, L.↗
NASA NTRS2000

The Impact of Sea Ice Concentration Accuracies on Climate Model Simulations with the GISS GCM

The Goddard Institute for Space Studies global climate model (GISS GCM) is used to examine the sensitivity of the simulated climate to sea ice concentration specifications in the type of simulation done in the Atmospheric Modeling Intercomparison Project (AMIP), with specified oceanic boundary conditions. Results show that sea ice concentration uncertainties of +/- 7% can affect simulated regional temperatures by more than 6 C, and biases in sea ice concentrations of +7% and -7% alter simulated annually averaged global surface air temperatures by -0.10 C and +0.17 C, respectively, over those in the control simulation. The resulting 0.27 C difference in simulated annual global surface air temperatures is reduced by a third, to 0.18 C, when considering instead biases of +4% and -4%. More broadly, least-squares fits through the temperature results of 17 simulations with ice concentration input changes ranging from increases of 50% versus the control simulation to decreases of 50% yield a yearly average global impact of 0.0107 C warming for every 1% ice concentration decrease, i.e., 1.07 C warming for the full +50% to -50% range. Regionally and on a monthly average basis, the differences can be far greater, especially in the polar regions, where wintertime contrasts between the +50% and -50% cases can exceed 30 C. However, few statistically significant effects are found outside the polar latitudes, and temperature effects over the non-polar oceans tend to be under 1 C, due in part to the specification of an unvarying annual cycle of sea surface temperatures. The +/- 7% and 14% results provide bounds on the impact (on GISS GCM simulations making use of satellite data) of satellite-derived ice concentration inaccuracies, +/- 7% being the current estimated average accuracy of satellite retrievals and +/- 4% being the anticipated improved average accuracy for upcoming satellite instruments. Results show that the impact on simulated temperatures of imposed ice concentration changes is least in summer, encouragingly the same season in which the satellite accuracies are thought to be worst. Hence the impact of satellite inaccuracies is probably less than the use of an annually averaged satellite inaccuracy would suggest.

Parkinson, Claire L.↗
NASA NTRS1992

Spacecraft-spacecraft very long baseline interferometry. Part 1: Error modeling and observable accuracy

In Part 1 of this two-part article, an error budget is presented for Earth-based delta differential one-way range (delta DOR) measurements between two spacecraft. Such observations, made between a planetary orbiter (or lander) and another spacecraft approaching that planet, would provide a powerful target-relative angular tracking data type for approach navigation. Accuracies of better than 5 nrad should be possible for a pair of spacecraft with 8.4-GHz downlinks, incorporating 40-MHz DOR tone spacings, while accuracies approaching 1 nrad will be possible if the spacecraft incorporate 32-GHz downlinks with DOR tone spacing on the order of 250 MHz; these accuracies will be available for the last few weeks or months of planetary approach for typical Earth-Mars trajectories. Operational advantages of this data type are discussed, and ground system requirements needed to enable spacecraft-spacecraft delta DOR observations are outlined. This tracking technique could be demonstrated during the final approach phase of the Mars '94 mission, using Mars Observer as the in-orbit reference spacecraft, if the Russian spacecraft includes an 8.4-GHz downlink incorporating DOR tones. Part 2 of this article will present an analysis of predicted targeting accuracy for this scenario.

Edwards, C. D., Jr.↗
NASA NTRSDate not supplied

TPSAS-NF1676L-29139-DND

The Arctic has been warming at a rate outpacing globally-averaged warming by 2-3 times, a phenomenon known as "Arctic Amplification" (AA). AA is evident in observations of Arctic surface temperature over the last century as well as in model predictions. The accuracy of model predictions is crucial to determine our response to climate change, as Arctic changes have consequences for the atmospheric circulation, sea level rise, and the carbon cycle. Unfortunately, models show a wide range of possible futures and intermodel spread in projections of Arctic temperature is larger than for any other region: a 2°C global temperature increase- the limit set by the Paris Climate Agreement- would lead to an Arctic temperature change between 3-7°C according to Coupled Model Intercomparison 5 (CMIP5) models. This intermodel spread represents a key deficiency in the understanding of Arctic feedback processes and how changes in various physical parameters (e.g. sea ice cover, clouds, heat transport and surface fluxes) affect the temperature response. Using a process-oriented decomposition of the simulate Arctic surface energy budget, we attribute the largest contribution to the CMIP5 intermodel spead in projected Arctic warming to the Barents-Kara Sea region. Our results reveal that the increasing seasonal fluxing of ocean heat content is a significant part of the intermodel spread in AA and relates strongly to change in surface turbulent fluxes. Our results indicate that if we are to significantly reduce the intermodel spread in projected AA we must focus on understanding the behavior and physical processes that drive surface energy flows in the B-K sea region.

Patrick Taylor↗
NASA NTRS1994

Parameterization of bulk condensation in numerical cloud models

The accuracy of the moist saturation adjustment scheme has been evaluated using a three-dimensional explicit microphysical cloud model. It was found that the error in saturation adjustment depends strongly on the Cloud Condensation Nucleii (CCN) concentration in the ambient atmosphere. The scheme provides rather accurate results in the case where a sufficiently large number of CCN (on the order of several hundred per cubic centimeter) is available. However, under conditions typical of marine stratocumulus cloud layers with low CCN concentration, the error in the amounts of condensed water vapor and released latent heat may be as large as 40%-50%. A revision of the saturation adjustment scheme is devised that employs the CCN concentration, dynamical supersaturation, and cloud water content as additional variables in the calculation of the condensation rate. The revised condensation model reduced the error in maximum updraft and cloud water content in the climatically significant case of marine stratocumulus cloud layers by an order of magnitude.

Kogan, Yefim L.↗
NASA NTRS1984

Surface accuracy measurement sensor test on a 50-meter antenna surface model

The Surface Accuracy Measurement Sensor (SAMS) is a telescope with a focal plane photo electric detector that senses the lateral position of light source targets in its field of view. After extensive laboratory testing the engineering breadboard sensor system was installed and tested on a 30 degree segment of a 50-meter diameter, mesh surface, antenna model. Test results correlated well with the laboratory tests and indicated accuracies of approximately 0.59 arc seconds at 21 meters range. Test results are presented and recommendations given for sensor improvements.

Spiers, R. B.↗
NASA NTRS2004

From the Cluster Temperature Function to the Mass Function at Low Z

This XMM project consisted of three observations of the nearby, hot galaxy cluster Triangulum Australis, one of the cluster center and two offsets. The goal was to measure the radial gas temperature profile out to large radii and derive the total gravitating mass within the radius of average mass overdensity 500. The central pointing also provides data for a detailed two-dimensional gas temperature map of this interesting cluster. We have analyzed all three observations. The derivation of the temperature map using the central pointing is complete, and the paper is soon to be submitted. During the course of this study and of the analysis of archival XMM cluster observations, it became apparent that the commonly used XMM background flare screening techniques are often not accurate enough for studies of the cluster outer regions. The information on the cluster's total masses is contained at large off-center distances, and it is precisely the temperatures for those low-brightness regions that are most affected by the detector background anomalies. In particular, our two offset observations of the Triangulum have been contaminated by the background flares ("bad cosmic weather") to a degree where they could not be used for accurate spectral analysis. This forced us to expand the scope of our project. We needed to devise a more accurate method of screening and modeling the background flares, and to evaluate the uncertainty of the XMM background modeling. To do this, we have analyzed a large number of archival EPIC blank-field and closed-cover observations. As a result, we have derived stricter background screening criteria. It also turned out that mild flares affecting EPIC-pn can be modeled with an adequate accuracy. Such modeling has been used to derive our Triangulum temperature map. The results of our XMM background analysis, including the modeling recipes, are presented in a paper which is in final preparation and will be submitted soon. It will be useful not only for our future analysis but for other XMM cluster observations as well.

Mushotzky, Richard↗
NASA NTRS2020

An Integrated Model of Models for Global Flood Alerting

A dramatic increase in frequency of minor to major flooding since 2000 has caused significant damage to infrastructure and economic losses across the world. To mitigate and recover from these losses, actions have been taken to build resilient communities and infrastructures. Situational awareness in near real-time is essential to ensure community resilience and enhance response and recovery efforts. Several hydrologic and hydraulic flood models are available at various spatial and temporal resolutions at regional to global scale. Given the global coverage of two operational flood models - GloFAS (Global Flood Awareness System) and GFMS (Global Flood Monitoring System), the first component of this project first focuses on integrating the outputs from these two models to classify flood severity and send alerts based on potential for impacts similar to the USGS PAGER (used for severity alerting and impact analysis for earthquakes). The second component of the project focuses on using flood outputs derived from earth observation data to validate, update and add additional exposure and impact products to flood alerts. The flood impacts and severity information will be disseminated as alerts and maps through the DisasterAWARE platform, operated by the Pacific Disaster Center (PDC), that provides global multi-hazard alerting and Situational Awareness information to the emergency management community and public. In this presentation, the following objectives will be covered: (i) the effective integration of the flood models, (ii) accuracy of the flood model outputs (flood extent and depth) for specific flood events both in the United States and globally in comparison with each other and earth observation data.

Glasscoe, Margaret↗
NASA NTRS1983

Analysis of Subpixel Registration Accuracy

Geometric and probabilistic models for subpixel accuracy are developed. The geometric models bound the error in offset estimation using the pixels in an observed digital straight line. One probabilistic model bounds the estimate of error offset for continuous images. The other model bounds the error for discrete images given that one is in the correct pixel.

Lavine, D.↗
NASA NTRS1986

The effect of Thematic Mapper spectral properties on land cover mapping for hydrologic modeling

The accuracy of unsupervised land-cover classification from all seven Landsat TM bands and from six combinations of three or four bands is evaluated using images of the Clinton River Basin, a suburban watershed near Detroit. Data from aerial TMS photography, USGS topographic maps, and ground surveys are employed to determine the classification accuracy. The mapping accuracy of all seven bands is found to be significantly better (6 percent overall, 12 percent for residential areas, and 13 percent for commercial districts) than that with bands 2, 3, and 4; but almost the same accuracy is obtained by including at least one band from each major spectral region (visible, NIR, and mid-IR).

Gervin, J. C.↗
NASA NTRS1997

Assessment of Required Accuracy of Digital Elevation Data for Hydrologic Modeling

The effect of vertical accuracy of Digital Elevation Models (DEMs) on hydrologic models is evaluated by comparing three DEMs and resulting hydrologic model predictions applied to a 7.2 sq km USDA - ARS watershed at Mahantango Creek, PA. The high resolution (5 m) DEM was resempled to a 30 m resolution using method that constrained the spatial structure of the elevations to be comparable with the USGS and SIR-C DEMs. This resulting 30 m DEM was used as the reference product for subsequent comparisons. Spatial fields of directly derived quantities, such as elevation differences, slope, and contributing area, were compared to the reference product, as were hydrologic model output fields derived using each of the three DEMs at the common 30 m spatial resolution.

HYDROLOGIC MODELS↗
NASA NTRS1976

Effects of rotor model degradation on the accuracy of rotorcraft real time simulation

The effects are studied of degrading a rotating blade element rotor mathematical model to meet various real-time simulation requirements of rotorcraft. Three methods of degradation were studied: reduction of number of blades, reduction of number of blade segments, and increasing the integration interval, which has the corresponding effect of increasing blade azimuthal advance angle. The three degradation methods were studied through static trim comparisons, total rotor force and moment comparisons, single blade force and moment comparisons over one complete revolution, and total vehicle dynamic response comparisons. Recommendations are made concerning model degradation which should serve as a guide for future users of this mathematical model, and in general, they are in order of minimum impact on model validity: (1) reduction of number of blade segments, (2) reduction of number of blades, and (3) increase of integration interval and azimuthal advance angle. Extreme limits are specified beyond which the rotating blade element rotor mathematical model should not be used.

Houck, J. A.↗
NASA NTRS2017

Ionospheric Slant Total Electron Content Analysis Using Global Positioning System Based Estimation

A method, system, apparatus, and computer program product provide the ability to analyze ionospheric slant total electron content (TEC) using global navigation satellite systems (GNSS)-based estimation. Slant TEC is estimated for a given set of raypath geometries by fitting historical GNSS data to a specified delay model. The accuracy of the specified delay model is estimated by computing delay estimate residuals and plotting a behavior of the delay estimate residuals. An ionospheric threat model is computed based on the specified delay model. Ionospheric grid delays (IGDs) and grid ionospheric vertical errors (GIVEs) are computed based on the ionospheric threat model.

Sparks, Lawrence C.↗
NASA NTRS2016

Aerodynamic Characterisation of an Experimental Tilt-Wing Aircraft

Computational analysis of experimental aircraft prior to test ights can be a valuable tool to estimate ight characteristics and determine areas of elevated caution. It can also provide feedback to software and model developers as to the accuracy of models used when the aircraft is ultimately own. This paper describes the aerodynamic analysis and characterisation of an experimental tilt-wing aircraft with a unique design. The paper covers what analysis is performed as well as results of these aircraft characterisations. Through this analysis a database le is created for use with NASA Design and Analysis of Rotorcraft (NDARC) tool.

Aerodynamics Characterisation↗