Search NASA⌕ Search

SEARCH · Search NASA

Results for “model benchmark”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Gravitational Wave Symphony from Oscillating Spectator Scalar Fields

We investigate a generic source of stochastic gravitational wave background due to the parametric resonance of oscillating scalar fields in the early Universe. By systematically analyzing benchmark models through lattice simulations and considering a wide range of parameters, we demonstrate that such a scenario can lead to detectable signals in gravitational wave detectors over a broad frequency range and potentially address the recent findings by pulsar timing array experiments. Furthermore, these models naturally yield ultralight dark matter candidates or dark radiation detectable by cosmic microwave background observatories. Published by the American Physical Society 2024

Physics↗

Search for Light Long-Lived Particles in $pp$ Collisions at $\sqrt{s} =$ 13 TeV Using Displaced Vertices in the ATLAS Inner Detector

A search for long-lived particles (LLPs) using 140 fb -1 of pp collision data with $\sqrt{s} =$ 13 TeV recorded by the ATLAS experiment at the LHC is presented. The search targets LLPs with masses between 5 and 55 GeV that decay hadronically in the ATLAS inner detector. Benchmark models with LLP pair production from exotic decays of the Higgs boson and models featuring long-lived axionlike particles (ALPs) are considered. No significant excess above the expected background is observed. Upper limits are placed on the branching ratio of the Higgs boson to pairs of LLPs, the cross section for ALPs produced in association with a vector boson, and, for the first time, on the branching ratio of the top quark to an ALP and a u/c quark.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Study on Conversion from an Existing Alternating Current Medium-Voltage Line to a Direct Current Line: A Case of Load or Source Expansion

Simultaneous increase of power generation through renewable systems and load due owing to the rapid growth in electrified road transportation systems, leads to new challenges in the design, operation, and protection of distribution-level electrical power systems. This paper addresses challenges related to the integration of new sources or loads to a distribution grid through long alternating current lines. The International Council on Large Electric Systems medium-voltage benchmark model developed for North America was used for simulation studies. Use cases were developed to illuminate the issues related to long alternating current lines and the usefulness of medium-voltage direct current lines in a distribution network.

Jaldanki, Sreenivasa↗

Detection and Diagnosis of Data Integrity Attacks in Solar Farms Based on Multilayer Long Short-Term Memory Network

Photovoltaic (PV) systems are becoming more vulnerable to cyber threats. In response to this emerging concern, developing cyber-secure power electronics converters has received increased attention from the IEEE Power Electronics Society that recently launched a cyber-physical-security initiative. Here this letter proposes a deep sequence learning based diagnosis solution for data integrity attacks on PV systems in smart grids, including dc–dc and dc–ac converters. The multilayer long short-term memory networks are used to leverage time-series electric waveform data from current and voltage sensors in PV systems. The proposed method has been evaluated in a PV smart grid benchmark model with extensive quantitative analysis. As a comparison, we have evaluated classic data-driven methods, including K-nearest neighbor, decision tree, support vector machine, artificial neural network, and convolutional neural network. Comparison results verify performances of the proposed method for detection and diagnosis of various data integrity attacks on PV systems.

42 ENGINEERING↗

Measurements of the production cross-section for a Z boson in association with b - or c -jets in proton–proton collisions at $\sqrt{s} = 13$ TeV with the ATLAS detector

This paper presents a measurement of the production cross-section of a Z boson in association with b- or c-jets, in proton–proton collisions at $\sqrt{s} = 13$ TeV with the ATLAS experiment at the Large Hadron Collider using data corresponding to an integrated luminosity of 140 fb –1 . Inclusive and differential cross-sections are measured for events containing a Z boson decaying into electrons or muons and produced in association with at least one b-jet, at least one c-jet, or at least two b-jets with transverse momentum p T > 20 GeV and rapidity |y| < 2.5. Predictions from several Monte Carlo generators based on next-to-leading-order matrix elements interfaced with a parton-shower simulation, with different choices of flavour schemes for initial-state partons, are compared with the measured cross-sections. The results are also compared with novel predictions, based on infrared and collinear safe jet flavour dressing algorithms. Selected Z+≥ 1 c-jet observables, optimized for sensitivity to intrinsic-charm, are compared with benchmark models with different intrinsic-charm fractions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Optimal Financing Decision in a Contract Food Supply Chain with Capital Constraint

To solve the financing problem of the food producers, we consider a two‐echelon contract food supply chain composed of a family farm with capital constraints and a food processing enterprise. With no capital constraints as the benchmark model, we analyze optimal decisions of the family farm and the food processing enterprise in the case of bank financing with bank participation only and bank financing with “government, bank, and insurance” coparticipation. Then, we discuss how the risk of yield uncertainty influences the optimal decisions and profits of the family farm and the food processing enterprise under different financing situation. Meanwhile, the reason why the government subsidizes agriculture is explored, and the policy of minimum purchase price of the food is initiated when the market price is too low. Finally, the numerical examples and sensitivity analysis are presented. The results show that the bank financing with “government, bank, and insurance” coparticipation improves the welfare of supply chain members more obviously than the bank financing with bank participation only; when the rice price is too low, the policy of minimum purchase price of food is initiated, which increases the revenue and the growing enthusiasm of the family farm; the profits of the family farm and the food processing enterprise will decrease as the risk of yield uncertainty increases in the case of bank financing, and the risk of yield uncertainty will be reduced for the family farm when bank financing with “government, bank, and insurance” coparticipation.

Luo, Ying (ORCID:0000000158101443)↗

Measurement and modeling of beam transport in the FODO line of the Spallation Neutron Source Beam Test Facility

Ongoing studies at the Spallation Neutron Source (SNS) Beam Test Facility (BTF) seek to understand and model bunch dynamics in a high-power LINAC front-end. The BTF has recently been upgraded with a reconfiguration from a U-shaped line to a Straight line. We report the current state of model benchmarking, with a focus on RMS beam sizes within the FODO line. The beam measurement is obtained via three camera/screen pairs in the FODO line. This presentation discusses the methodology and results of this measurement.

Thompson, Trent↗

Effects of nitrogen on tungsten surfaces investigated with low energy ion scattering

The effect of nitrogen on the surfaces of polycrystalline ITER-grade tungsten and a tungsten single crystal were studied with low energy ion scattering (LEIS) and direct recoil spectroscopy (DRS). LEIS and DRS measurements on both tungsten surfaces were performed in an ultra-high vacuum system as various quantities of N 2 were introduced into the chamber through a variable leak valve. The obtained ion energy spectra reveal that nitrogen was readily adsorbed onto the surface, in turn limiting the amount of hydrogen that could be adsorbed onto the surface. These results not only provide insight into how the presence of nitrogen on tungsten surfaces may play a role in hydrogen adsorption and retention, but also serve to benchmark models being developed to describe the H-N-W system.

36 MATERIALS SCIENCE↗

Final Design of a New Pulsed-Neutron Die-Away Experimental Testbed for Thermal Scattering Law Benchmarks (PNDA) (IER-501 CED-2)

This report presents the final design (CED-2) of IER-501, a testbed for pulsed-neutron die-away (PNDA) experiments at Lawrence Livermore National Laboratory (LLNL). The PNDA experiments will be high-quality benchmarks that serve to optimize and validate thermal neutron scattering laws (TSLs), which are high-priority nuclear data for the Department of Energy’s Nuclear Criticality Safety Program (NCSP). This CED-2 was guided by experimental results gathered from a prototype experimental set-up rather than with detailed simulations as is typically done for criticality experiments. The report presents the PNDA design and its equipment, and it documents the methodology used to postprocess the measured data. It discusses how experimental configurations influenced the decay-constant eigenvalue, or the integral parameter, of the experiment. The studied variations included the distance from the target to the generator, the orientation of the generator relative to the box, the orientation of the target to the generator, the effect of HDPE lining in the shielding box, the settings of the generator, and finally the benefits of using a low-scatter facility. From these results, a final configuration for the target, detectors, shielding box, and neutron generator was chosen. Two factors particularly influenced the chosen configuration: the reproducibility of the experiment’s geometry for benchmark modeling, and the minimization of measured neutrons scattered off the shielding box.

42 ENGINEERING↗

Sensitivity to Dijet Resonances at Proton-Proton Colliders

A significant benchmark for discovery at a proton-proton collider is the sensitivity to a dijet resonance, X, the intermediate state of the s-channel process $pp \rightarrow X \rightarrow 2\mbox{ jets}$. To probe the highest resonance masses, hadron collider experiments have used the classic technique of searching for bumps in the mass spectrum of two individually resolved jets. In this Snowmass 2021 study, we explore the search sensitivity to multiple benchmark models of dijet resonances at current and future proton-proton colliders. We present the expected masses for $5\sigma$ discovery and 95% confidence level exclusion of diquarks, colorons, excited quarks, $W^{\prime}s$, $Z^{\prime}s$ and Randall-Sundrum gravitons, resulting from accumulation of integrated luminosities between 10 and $10^5$ fb$^{-1}$, at proton-proton colliders operating at energies $\sqrt{s}=$ 13, 14, 27, 75, 100, 150, 300 and 500 TeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Investigating a Potential Hafnium Bias in SCALE [Slides]

Previous work has examined the evidence for a gadolinium bias within SCALE. This work extends the previous work to include benchmark models with hafnium experiments from the ICSBEP Handbook. VALID contains only one experiment with hafnium: MIX-COMP-THERM-008. Newly generated models provide an opportunity to assess the potential presence of a hafnium bias.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

An ML-based terrestrial data fusion and augmentation framework to enable advanced understanding of the terrestrial carbon and water interactions

Soil moisture is essential to the terrestrial carbon and water cycles and land–atmosphere interactions. There are various types of soil moisture data, and each type has the distinct spatiotemporal strengths and limitations, depending on the diverse applications and retrieval methodologies of different data types (Li et al., in review; The PNNL-82151 FY23 Report). However, the limitations of different soil moisture data in terms of accuracy and spatiotemporal coverage hinder our ability to further understand the soil moisture dynamics across scales. To have a gap free soil moisture data product with a fine spatiotemporal coverage and vertical profiles, we train extreme gradient boosting (XGBoost) models by using (1) in-situ soil moisture measurements from the International Soil Moisture Network (ISMN), (2) soil moisture from the ECMWF reanalysis (ERA) at the 9 km and sub-daily spatiotemporal resolution, (3) the Daymet meteorological fields, and (4) data products that characterize surface conditions, including soil texture, organic content, topography, vegetation type, and rooting depth. We use the trained XGBoost models that have consistent performance across seven soil layers, i.e., 0–5 cm, 5–10 cm, 10–20 cm, 20–40 cm, 40–60 cm, 60–100 cm, and 100–200 cm, and the gridded model predictors to generate a soil moisture data at the 1 km and daily spatiotemporal resolution for the Continental United States (CONUS) from 2001–2020. This dataset can be broadly used for Earth system model benchmark, monitoring extreme weathers, making informed decisions regarding agriculture, water resource management, climate change mitigation, and ecosystem preservation.

58 GEOSCIENCES↗

RUBISCO Soil Moisture Working Group (SMWG) Mini-Workshop Report

The RUBISCO Soil Moisture Working Group (SMWG), an initiative bolstered by the DOE RUBISCO Science Focus Area project, is committed to unraveling the intricacies of soil moisture and its profound impact on global hydrology, energy, and biogeochemical cycles. Confronted with the complex challenges in multi-scale SM data development, feedback analysis, and model benchmarking, the SMWG aims to catalyze advancements in the field through a synergistic approach that engages leaders in soil moisture research and encompasses diverse datasets and novel analytical techniques.

54 ENVIRONMENTAL SCIENCES↗

Neutrino-Argon Cross-Section Measurements from the MicroBooNE Experiment

MicroBooNE is a liquid argon time projection chamber (LArTPC) neutrino detector located along the Fermilab Booster Neutrino Beam and 8 degrees off-axis to the Neutrinos at the Main Injector beam. MicroBooNE collected data from both beams accumulating a large neutrino-argon scattering dataset with a mean neutrino energy of approximately 0.8 GeV. Understanding neutrino-argon interactions is crucial for the next generation of neutrino oscillation experiments including DUNE. MicroBooNE has developed pioneering methodologies and novel reconstruction tools in order to benchmark models at very high sensitivity across the interaction phase space, including for ultra-rare channels. This talk will give an overview of the most recent MicroBooNE neutrino interaction results. These measurements provide invaluable datasets for constraining backgrounds and improving the modelling of neutrino scattering critical for the broader LArTPC neutrino physics program.

Liu, Liang [Fermilab]↗

Search for Long-Lived Particles with Muon Detector Shower Signature in the CMS Run-3 data

Many beyond standard model theories predict the existence of long-lived particles (LLPs). These LLPs can have sizable lifetimes and decay several meters from their production vertex. In this poster/talk, we present the analysis strategy for searching for LLPs using the Compact Muon Solenoid (CMS) Experiment. The proton-proton collision data used in this analysis were collected from 2022 to 2024 at a center-of-mass energy of 13.6 TeV, corresponding to an integrated luminosity of 170 fb^-1. The LLP decays are reconstructed as a high-multiplicity cluster of detector hits in the cathode strip chambers (CSC) of the muon system endcap. This signature is referred to as the Muon Detector Showers (MDS). This search requires events to contain at least one MDS cluster. The analysis focuses on LLP hadronic decays and LLP masses up to a few tens of GeV. We present the signal properties in MonteCarlo simulation, event selection, background modeling, and evaluation of the expected sensitivity. The results are interpreted under the Twin Higgs model benchmark.

Agyemang-Duah, Andrews [Grambling State U.]↗

The Wind Data Hub, also known as The Data Archive and Portal.

The Wind Data Hub, or WDH (formerly known as the Data Archive and Portal), is established by the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy’s Wind Energy Technologies Office (WETO). The WDH provides secure, timely, easy, and open access to all laboratory, field, and benchmark model data produced by land-based and offshore projects funded by WETO.

17 WIND ENERGY↗

Spatio-Temporal Anomaly Detection with Graph Networks for Data Quality Monitoring of the Hadron Calorimeter

The Compact Muon Solenoid (CMS) experiment is a general-purpose detector for high-energy collision at the Large Hadron Collider (LHC) at CERN. It employs an online data quality monitoring (DQM) system to promptly spot and diagnose particle data acquisition problems to avoid data quality loss. In this study, we present a semi-supervised spatio-temporal anomaly detection (AD) monitoring system for the physics particle reading channels of the Hadron Calorimeter (HCAL) of the CMS using three-dimensional digi-occupancy map data of the DQM. We propose the GraphSTAD system, which employs convolutional and graph neural networks to learn local spatial characteristics induced by particles traversing the detector and the global behavior owing to shared backend circuit connections and housing boxes of the channels, respectively. Recurrent neural networks capture the temporal evolution of the extracted spatial features. We validate the accuracy of the proposed AD system in capturing diverse channel fault types using the LHC collision data sets. The GraphSTAD system achieves production-level accuracy and is being integrated into the CMS core production system for real-time monitoring of the HCAL. We provide a quantitative performance comparison with alternative benchmark models to demonstrate the promising leverage of the presented system.

43 PARTICLE ACCELERATORS↗

Strategy and performance of the CMS long-lived particle trigger program in proton-proton collisions at $\sqrt{s}$ = 13.6 TeV

In the physics program of the CMS experiment during the CERN LHC Run 3, which started in 2022, the long-lived particle triggers have been improved and extended to expand the scope of the corresponding searches. These dedicated triggers and their performance are described in this paper, using several theoretical benchmark models that extend the standard model of particle physics. The results are based on proton-proton collision data collected with the CMS detector during 2022$-$2024 at a center-of-mass energy of 13.6 TeV, corresponding to integrated luminosities of up to 123 fb$^{-1}$.

FOS: Physical sciences↗