Search NASA⌕ Search

SEARCH · Search NASA

Results for “molecular dynamic simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Ab initio molecular dynamics simulations of AlN responding to low energy particle radiation

Ab initio molecular dynamics simulations of low energy recoil events in wurtzite AlN have been performed to determine threshold displacement energies, defect production and evolution mechanisms, role of partial charge transfer during the process, and the influence of irradiation-induced defects on the properties of AlN. Here, the results show that the threshold displacement energies, E d , along the direction parallel to the basal planes are smaller than those perpendicular to the basal planes. The minimum E d values are determined to be 19 eV and 55 eV for N and Al atom, respectively, which occur along the [$\overline{11}20$] direction. In general, the threshold displacement energies for N are smaller than those for Al atom, indicating the N defects would be dominant under irradiation. The defect production mechanisms have been analyzed. It is found that charge transfer and redistribution for both the primary knock-on atom and the subsequent recoil atoms play a significant role in defect production and evolution. Similar to the trend in oxide materials, there is a nearly linear relationship between E d and the total amount of charge transfer at the potential energy peak in AlN, which provides guidance on the development of charge-transfer interatomic potentials for classic molecular dynamics simulations. Finally, the response behavior of AlN to low energy irradiation is qualitatively investigated. The existence of irradiation-induced defects significantly modifies the electronic structure, and thus affects the magnetic, electronic and optical properties of AlN. In conclusion, these findings further enrich the understanding of defects in the wide bandgap semiconductor of AlN.

36 MATERIALS SCIENCE↗

Testing thermal conductivity models with equilibrium molecular dynamics simulations of the one-component plasma

Equilibrium molecular dynamics simulations are used to calculate the thermal conductivity of the onecomponent plasma via the Green-Kubo formalism over a broad range of Coulomb coupling strength, 0.1 ≤ Γ ≤180. These simulations address previous discrepancies between computations using equilibrium versus nonequilibrium methods. Analysis of heat flux autocorrelation functions show that very long (6×10 5 $ω^{-1}_{p}$) time series are needed to reduce the noise level to allow ≲2% accuracy. The simulations provide accurate data for Γ ≲ 1. Furthermore, this enables a test of the traditional Landau-Spitzer theory, which is found to agree with the simulations for Γ ≲ 0.3. It also enables tests of theories to address moderate and strong Coulomb coupling. Two are found to provide accurate extensions to the moderate coupling regime of Γ ≲ 10, but none are accurate in the Γ ≳ 10 regime where potential energy transport and coupling between mass flow and stress dominate thermal conduction.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Reactive Molecular Dynamics Simulation of Kerogen Thermal Maturation and Cross-Linking Pathways

For this study, molecular dynamics simulations were performed with a ReaxFF reactive force field to investigate bond breaking and bond formation mechanisms during the early thermal maturation of kerogen and potential crosslinking pathways towards a three-dimensional (3D) quasi-infinite molecular network (crosslinked kerogen). Starting with small ensembles of high molecular mass models for immature type I Green River Shale kerogen (Kerogen 1-I), top of the oil window type II kerogen (Kerogen 2-L), and low maturity type III kerogen (Kerogen 3-L), low molecular mass species including H 2 O, H 2 S, C 2 H 4 , C 3 H 6 were produced as the maturities of the remaining kerogens increased. Highly reactive fragments, which are not detected in pyrolysis experiments, were also produced. Further, the crosslinking mechanism in the newly develop polymeric kerogen networks appears to be highly complex and it is influenced by the nature of the kerogen. Covalent —C—S—, —C—O— and —C—C— bonds are the primary crosslinks that structurally binds kerogen monomers together. The trends observed in the thermochemical transformation of kerogen and the kerogen crosslinking pathways are consistent with the theoretical and experimental studies reported in the scientific literature. The reactive force field molecular dynamics simulation provides a potentially valuable alternative approach to the development of a realistic 3D molecular network of kerogen. However, the conversion of kerogen molecules into a 3D molecular network was low.

02 PETROLEUM↗

The Impact of Protonation on Early Translocation of Anthrax Lethal Factor: Kinetics from Molecular Dynamics Simulations and Milestoning Theory

We report atomically detailed molecular dynamics simulations of the permeation of the lethal factor (LF) N-terminal segment through the anthrax channel. The N-terminal chain is unstructured and leads the permeation process for the LF protein. The simulations were conducted in explicit solvent with milestoning theory, making it possible to extract kinetic information from nanosecond to millisecond time scales. Here, we illustrate that the initial event is strongly influenced by the protonation states of the permeating amino acids. While the N-terminal segment passes easily at high protonation state through the anthrax channel (and the Φ clamp), the initial permeation represents a critical step, which can be irreversible and establishes a hook in the channel mouth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of three phases of liquid carbon by tight-binding molecular dynamics simulations

In this work, we have performed systematic molecular dynamics simulations to study the structures of liquid carbon at 5000 K with the weight density ranging from 1.4 to 3.5 g cm –3 , using a three-center tight-binding potential of carbon. The simulation results show that the bonding characteristics of the liquid changes predominately from twofold to threefold, and then to fourfold coordination as the density increases. Signals of two structural changes at the densities of about 1.9 and 3.0 g cm –3 respectively are revealed by the slope changes in the density dependence of structural, electronic and dynamical properties. Our simulation results suggest that there are three distinct liquid carbon phases in this density range. However, further thermodynamics calculations, e.g. , free energy calculations, would be required to clarify the possible liquid–liquid transitions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular Dynamics Simulations of a Liquid Metal Wetting Zirconia Suboxides

Molecular dynamics simulations were performed of a liquid metal (Ag) interacting with various zirconia suboxides to calculate the work of adhesion between the liquid metal and the suboxides. These simulations were then used to assess the impact of oxygen content on wetting. The results of this work show a wetting transition as oxygen content is reduced.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Quantitative Analysis of Aqueous Nanofilm Rupture by Molecular Dynamic Simulation

In this study, we used molecular dynamic (MD) simulations of the rupture process for a water film to define and determine the critical rupture time (CRT). This new approach could be an important method for authentically defining and determining the rupture point of a water film and associated phenomena. We were able to generically predict the CRT and the critical thickness of the water film. Then, we studied the effect of ions on the film rupture process. Our results showed that addition of sodium chloride did not significantly affect on the stability of the water film. Results from MD simulations, when compared with results from experimental measurements, can provide insights into the film rupture process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Semi-Empirical Interatomic Potential for Large-Scale Molecular Dynamics Simulation of Metal-Oxide Systems

Classical molecular dynamics (MD) simulation can be applied to systems containing billions of atoms during times up to microseconds. However, utilization of a large-scale MD simulation requires reliable but computationally cheap interatomic potentials. In the case of metallic systems, embedded atom method (EAM) and Finnis-Sinclair (FS) potentials are the reasonable choices, but their development for multicomponent alloys is a challenge. Addition of oxygen atoms makes the problem of developing semi-empirical potentials even more difficult because the long-range Coulomb interaction cannot be neglected, and different atoms have different charges which vary during MD relaxation such that a charge equilibration procedure should be applied every MD step. As results researchers tend to avoid simulating metal-oxide systems. In this talk, a new Finnis-Sinclair (FS) Ni-Co-Cr potential will be presented. Special attention will be paid to reproducing of the element melting temperatures and clustering. Next, a charge transfer ionic potential (CTIP) developed to simulate the NiO properties will be presented. This potential utilizes the Ni FS potential and accounts for the Coulomb interaction in the vicinity of oxygen atoms. Fitting of the CTIP parameters and FS potential functions describing the interaction with oxygen atoms to the available experimental and ab initio data will be discussed. Results of MD simulation of interaction of NiO particles with dislocations in Ni will be shown.

molecular dynamics simulation↗

Molecular Dynamics Simulation of Binary Fluid in a Nanochannel

This paper presents the results from a molecular dynamics simulation of binary fluid (mixture of argon and krypton) in the nanochannel flow. The computational software LAMMPS is used for carrying out the molecular dynamics simulations. Binary fluids of argon and krypton with varying concentration of atom species were taken for two densities 0.65 and 0.45. The fluid flow takes place between two parallel plates and is bounded by horizontal walls in one direction and periodic boundary conditions are imposed in the other two directions. To drive the flow, a constant force is applied in one direction. Each fluid atom interacts with other fluid atoms and wall atoms through Week-Chandler-Anderson (WCA) potential. The velocity profile has been looked at for three nanochannel widths i.e for 12{sigma}, 14{sigma} and 16{sigma} and also for the different concentration of two species. The velocity profile of the binary fluid predicted by the simulations agrees with the quadratic shape of the analytical solution of a Poiseuille flow in continuum theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Molecular dynamics simulations of Na{sup +} and leucine transport by LeuT

Molecular dynamics simulations are used to gain insight into the binding of Na{sup +} and leucine substrate to the bacterial amino acid transporter LeuT, focusing on the crystal structures of LeuT in the outward-open and inward-open states. For both conformations of LeuT, a third Na{sup +} binding site involving Glu290 in addition to the two sites identified from the crystal structures is observed. Once the negative charge from Glu290 in the inward-open LeuT is removed, the ion bound to the third site is ejected from LeuT rapidly, suggesting that the protonation state of Glu290 regulates Na{sup +} binding and release. In Cl{sup −}-dependent transporters where Glu290 is replaced by a neutral serine, a Cl{sup −} ion would be required to replace the role of Glu290. Thus, the simulations provide insights into understanding Na{sup +} and substrate transport as well as Cl{sup −}-independence of LeuT. - Highlights: • Ion binding site involving Glu290 is identified in the outward- and inward-open LeuT. • Sodium is released from inward-open LeuT once the side chain of Glu290 is protonated. • Protonation state of Glu290 regulates sodium binding and transport in LeuT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Applying Molecular Dynamics Simulations to Identify Rarely Sampled Ligand-bound Conformational States of Undecaprenyl Pyrophosphate Synthase, an Antibacterial Target

Undecaprenyl pyrophosphate synthase is a cis-prenyltransferase enzyme, which is required for cell wall biosynthesis in bacteria. Undecaprenyl pyrophosphate synthase is an attractive target for antimicrobial therapy. We performed long molecular dynamics simulations and docking studies on undecaprenyl pyrophosphate synthase to investigate its dynamic behavior and the influence of protein flexibility on the design of undecaprenyl pyrophosphate synthase inhibitors. We also describe the first X-ray crystallographic structure of Escherichia coli apo-undecaprenyl pyrophosphate synthase. The molecular dynamics simulations indicate that undecaprenyl pyrophosphate synthase is a highly flexible protein, with mobile binding pockets in the active site. By carrying out docking studies with experimentally validated undecaprenyl pyrophosphate synthase inhibitors using high- and low-populated conformational states extracted from the molecular dynamics simulations, we show that structurally dissimilar compounds can bind preferentially to different and rarely sampled conformational states. By performing structural analyses on the newly obtained apo-undecaprenyl pyrophosphate synthase and other crystal structures previously published, we show that the changes observed during the molecular dynamics simulation are very similar to those seen in the crystal structures obtained in the presence or absence of ligands. We believe that this is the first time that a rare 'expanded pocket' state, key to drug design and verified by crystallography, has been extracted from a molecular dynamics simulation.

59 BASIC BIOLOGICAL SCIENCES↗

Molecular dynamics simulations of damage production by thermal spikes in Ge

Molecular dynamics simulation techniques are used to analyze damage production in Ge by the thermal spike process and to compare the results to those obtained for Si. As simulation results are sensitive to the choice of the inter-atomic potential, several potentials are compared in terms of material properties relevant for damage generation, and the most suitable potentials for this kind of analysis are identified. A simplified simulation scheme is used to characterize, in a controlled way, the damage generation through the local melting of regions in which energy is deposited. Our results show the outstanding role of thermal spikes in Ge, since the lower melting temperature and thermal conductivity of Ge make this process much more efficient in terms of damage generation than in Si. The study is extended to the modeling of full implant cascades, in which both collision events and thermal spikes coexist. Our simulations reveal the existence of bigger damaged or amorphous regions in Ge than in Si, which may be formed by the melting and successive quenching induced by thermal spikes. In the particular case of heavy ion implantation, defect structures in Ge are not only bigger, but they also present a larger net content in vacancies than in Si, which may act as precursors for the growth of voids and the subsequent formation of honeycomb-like structures.

36 MATERIALS SCIENCE↗

Molecular dynamics simulations of the orthoclase (001)- and (010)-water interfaces

Molecular dynamics simulations of water in contact with the (001) and (010) surfaces of orthoclase (KAlSi3O8) were carried out to investigate the structure and dynamics of the feldspar-water interface, contrast the intrinsic structural properties of the two surfaces, and provide a basis for future work on the diffusion of ions and molecules in microscopic mineral fractures. Electron density profiles were computed from the molecular dynamics trajectories and compared with those derived experimentally from high-resolution X-ray reflectivity measurements by Fenter and co-workers (Fenter et al., 2003a). For each surface, three scenarios were considered whereby the interfacial species is potassium, water, or a hydronium ion. Excellent agreement was obtained for the (001) surface when potassium is the predominant interfacial species. Good agreement was found for the (010) surface with some discrepancies which could be due in part to the fact that our model does not take into account the increased roughness of the (010) surface compared to the (001) surface. The two surfaces showed similarities in the extent of water ordering at the interface, the activation energies for water and potassium desorption, and the adsorption localization of interfacial species. However, there are also important differences between the two surfaces in the coordination of a given adsorbed species, adsorption sites density, and the propensity for water molecules in the adsorbed and first hydration layers to coordinate to surface bridging oxygen atoms. These differences may have implications for the extent of dissolution in the proton-promoted regime since hydrolysis of Si(Al)-O-Si(Al) bonds is thought to be the major dissolution mechanism.

74 ATOMIC AND MOLECULAR PHYSICS↗

Kinetically evolving irradiation-induced point defect clusters in UO{sub 2} by molecular dynamics simulation

The evolution of irradiation-induced point defects in UO{sub 2} is captured in molecular dynamics simulations. The approach used circumvents their creation during the ballistic phase of a traditional collision-cascade molecular dynamics simulation but rather focuses on their kinetic evolution. The simulations reveal that in the absence of defects on the cation sublattice, the defects initially present on the anion sublattice recombine and annihilate completely during equilibration. However, in the simultaneous presence of defects on both sublattices, Schottky defects are formed, thereby sequestering the oxygen vacancies. The resulting excess oxygen interstitials form cuboctahedral clusters, whose existence has previously been identified experimentally but whose generation mechanism has not been determined. It is concluded that the cation sublattice is primarily responsible for the radiation tolerance or intolerance of the material.

36 MATERIALS SCIENCE↗

Force field parameters for S-nitrosocysteine and molecular dynamics simulations of S-nitrosated thioredoxin

Estimation of structural perturbation induced by S-nitrosation is important to understand the mode of cellular signal transduction mediated by nitric oxide. Crystal structures of S-nitrosated proteins have been solved only for a few cases, however, so that molecular dynamics simulation may provide an alternative tool for probing structural perturbation. In this study AMBER-99 force field parameters for S-nitrosocysteine were developed and applied to molecular dynamics simulations of S-nitrosated thioredoxin. Geometry optimization at the level of HF/6-31G* was followed by a restrained electrostatic potential charge-fitting to obtain the atomic charges of S-nitrosocysteine. Force constants for bonds and angles were obtained from generalized AMBER force field. Torsional force constants for CC-SN and CS-NO were determined by fitting the torsional profiles obtained from geometry optimization with those from molecular mechanical energy minimization. Finally molecular dynamics simulations were performed with theses parameters on oxidized and reduced thioredoxin with and without S-nitrosocysteine. In all cases the root-mean-square deviations of {alpha}-carbons yielded well-behaved trajectories. The CC-SH dihedral angle which fluctuated severely during the simulation became quiet upon S-nitrosation. In conclusion the force field parameters developed in this study for S-nitrosocysteine appear to be suitable for molecular dynamics simulations of S-nitrosated proteins.

60 APPLIED LIFE SCIENCES↗

Calculating adsorption isotherms using the two-phase thermodynamic method and molecular dynamics simulations

We describe the calculation of adsorption isotherms from molecular dynamics simulations based on the two-phase thermodynamic (2PT) model. The 2PT model developed for bulk fluid phases treats the gas-like components as hard spheres (HSs), which correctly recovers the limiting behaviors of unconfined fluids. We showed that this treatment, however, does not always lead to the correct zero-loading behavior in strongly confining systems. For methane adsorption into zeolite MFI, the HS reference state underestimates entropy by up to 20% at low loadings and leads to an order-of-magnitude increase in the adsorption onset pressure. To fix these issues, we propose the use of ideal adsorbed gas (IAG) as the gas reference model, the properties of which can be computed using the Widom insertion method on an empty adsorbent. We further describe three routes to compute adsorption isotherms from the Helmholtz free energy at different loadings. Comparing against established Monte Carlo (MC) methods, we found that the adsorption isotherms obtained using the IAG reference state agrees to within 40%, which corresponds to deviations of <5% in adsorption free energy. The isotherms calculated using the HS reference state underestimate the adsorption uptake at low to medium loadings in strongly confining systems, but its accuracy improves at higher loadings and as the pore size increases relative to the sorbate diameter. The methods described here provide an alternative approach for computing adsorption isotherms when MC simulations in an open ensemble are undesirable and enable a direct comparison of computed adsorption thermodynamics with experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

MBX V1.2: Accelerating Data-Driven Many-Body Molecular Dynamics Simulations

The MBX software provides an advanced platform for molecular dynamics simulations, leveraging state-of-the-art MB-pol and MB-nrg data-driven many-body potential energy functions. Developed over the past decade, these potential energy functions integrate physics-based and machine-learned many-body terms trained on electronic structure data calculated at the "gold standard" coupled-cluster level of theory. Recent advancements in MBX have focused on optimizing its performance, resulting in the release of MBX v1.2. While the inherently many-body nature of MB-pol and MB-nrg ensures high accuracy, it poses computational challenges. MBX v1.2 addresses these challenges with significant performance improvements, including enhanced parallelism that fully harnesses the power of modern multicore CPUs. In conclusion, these advancements enable simulations on nanosecond time scales for condensed-phase systems, significantly expanding the scope of high-accuracy, predictive simulations of complex molecular systems powered by data-driven many-body potential energy functions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular dynamics simulation of interaction of H with vacancy in W

Molecular dynamics simulations were performed to investigate the interaction between H and vacancy in W using an analytical bond-order potential to describe the interactions between W-W, W-H and H-H. The most stable configuration for H in W is the tetrahedron interstitial site. We calculated the binding energies of an H and a vacancy to an H-vacancy cluster (HnVm) in W, respectively, where n and m ranged from 0 to 10. The binding energy was almost unchanged. The binding energy of a vacancy to H-vacancy cluster is about 0.4eV, which is higher than the binding energy of an H to H-vacancy cluster. Vacancy is much easier to binding with H-vacancy cluster than H. And H is easier to stay in the tetrahedron interstitial site or octahedron interstitial site in bcc W.

36 MATERIALS SCIENCE↗