Results for “no cobalt” — Page 10

DOE OSTI2022

Degradation Pathways of Cobalt–Free LiNiO 2 Cathode in Lithium Batteries

Electrode-electrolyte reactivity (EER) and particle cracking (PC) are considered two main causes of capacity fade in high-nickel layered oxide cathodes in lithium-based batteries. However, whether EER or PC is more critical remains debatable. Herein, the fundamental correlation between EER and PC is systematically investigated with LiNiO 2 (LNO), the ultimate cobalt-free lithium layered oxide cathode. Specifically, EER is found more critical than secondary particle cracking (SPC) in determining the cycling stability of LNO; EER leads to primary particle cracking, but mitigates SPC due to the inhibition of H2-H3 phase transformation. Two surface degradation pathways are identified for cycled LNO under low and high EERs. A common blocking surface reconstruction layer (SRL) containing electrochemically-inactive Ni 3 O 4 spinel and NiO rock-salt phases is formed on LNO in an electrolyte with a high EER; in contrast, an electrochemically-active SRL featuring regions of electron- and lithium-ion-conductive LiNi 2 O 4 spinel phase is formed on LNO in an electrolyte with a low EER. These findings unveil the intrinsic degradation pathways of LNO cathode and are foreseen to provide new insights into the development of lithium-based batteries with a minimized EER and a maximized service life.

25 ENERGY STORAGE↗

DOE OSTI2020

Single Cobalt Sites Dispersed in Hierarchically Porous Nanofiber Networks for Durable and High-Power PGM-Free Cathodes in Fuel Cells

Increasing catalytic activity and durability of atomically dispersed metal–nitrogen–carbon (M–N–C) catalysts for the oxygen reduction reaction (ORR) cathode in proton-exchange-membrane fuel cells remains a grand challenge. In this study, a high-power and durable Co–N–C nanofiber catalyst synthesized through electrospinning cobalt-doped zeolitic imidazolate frameworks into selected polyacrylonitrile and poly(vinylpyrrolidone) polymers is reported. The distinct porous fibrous morphology and hierarchical structures play a vital role in boosting electrode performance by exposing more accessible active sites, providing facile electron conductivity, and facilitating the mass transport of reactant. The enhanced intrinsic activity is attributed to the extra graphitic N dopants surrounding the CoN 4 moieties. The highly graphitized carbon matrix in the catalyst is beneficial for enhancing the carbon corrosion resistance, thereby promoting catalyst stability. The unique nanoscale X-ray computed tomography verifies the well-distributed ionomer coverage throughout the fibrous carbon network in the catalyst. The membrane electrode assembly achieves a power density of 0.40 W cm –2 in a practical H 2 /air cell (1.0 bar) and demonstrates significantly enhanced durability under accelerated stability tests. The combination of the intrinsic activity and stability of single Co sites, along with unique catalyst architecture, provide new insight into designing efficient PGM-free electrodes with improved performance and durability.

25 ENERGY STORAGE↗

DOE OSTI2026

The Influence of Mesoscale Particle Structure on the Electrode Degradation and Resultant Electrochemistry of Lithium Ion Cells With Nickel Rich Lithium Nickel Manganese Cobalt Oxide Positive Electrodes

Nickel-rich lithium nickel manganese cobalt oxide, NMC (LiNi x Mn y Co z O 2 ), materials are desirable positive electrodes in lithium ion batteries, providing high capacity and energy density. The mesoscale structure of NMC materials is commonly a polycrystalline aggregate, providing opportunity for short lithium ion transport distance of the small primary particles, yet facile material handling due to the larger secondary particles. On (de)lithiation the NMC unit cell changes volume, where the anisotropic strain can result in secondary particle fracture. This secondary particle fracture process during cycling has been associated with several degradation modes of NMC materials in LIBs. In this work, a milling process was determined whereby the secondary particles could be pre-fractured with retention of the parent primary particle crystallographic structure, crystallite size, and morphology, providing the ability to unambiguously determine the influence of NMC secondary particle size and mesostructure on resultant functional behavior. The bulk and interfacial properties and electrochemistry of as-received commercially obtained polycrystal NMC811 (LiNi 0.8 Mn 0.1 Co 0.1 O 2 , PC NMC) and its milled MPC NMC counterpart were compared. The smaller secondary particle size, higher surface area MPC NMC was found to result in 1) greater cathode tortuosity, 2) reduced surface Ni on the cycled MPC cathodes consistent with surface reconstruction, and 3) increased Ni deposition on the anodes from cathode-anode crosstalk. These factors manifested in unfavorable electrochemical behavior of MPC with lower functional capacity at both 1C and C/10 rates and higher impedance over extended moderate voltage (dis)charge cycling.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Supramolecular Tuning Enables Selective Oxygen Reduction Catalyzed by Cobalt Porphyrins for Direct Electrosynthesis of Hydrogen Peroxide

Abstract We report a supramolecular strategy for promoting the selective reduction of O 2 for direct electrosynthesis of H 2 O 2 . We utilized cobalt tetraphenylporphyrin (Co‐TPP), an oxygen reduction reaction (ORR) catalyst with highly variable product selectivity, as a building block to assemble the permanently porous supramolecular cage Co‐PB‐1(6) bearing six Co‐TPP subunits connected through twenty‐four imine bonds. Reduction of these imine linkers to amines yields the more flexible cage Co‐rPB‐1(6). Both Co‐PB‐1(6) and Co‐rPB‐1(6) cages produce 90–100 % H 2 O 2 from electrochemical ORR catalysis in neutral pH water, whereas the Co‐TPP monomer gives a 50 % mixture of H 2 O 2 and H 2 O. Bimolecular pathways have been implicated in facilitating H 2 O formation, therefore, we attribute this high H 2 O 2 selectivity to site isolation of the discrete molecular units in each supramolecule. The ability to control reaction selectivity in supramolecular structures beyond traditional host–guest interactions offers new opportunities for designing such architectures for a broader range of catalytic applications.

Smith, Peter T.↗

DOE OSTI2022

Aqueous Photoelectrochemical CO 2 Reduction to CO and Methanol over a Silicon Photocathode Functionalized with a Cobalt Phthalocyanine Molecular Catalyst

Abstract We report a precious‐metal‐free molecular catalyst‐based photocathode that is active for aqueous CO 2 reduction to CO and methanol. The photoelectrode is composed of cobalt phthalocyanine molecules anchored on graphene oxide which is integrated via a (3‐aminopropyl)triethoxysilane linker to p‐type silicon protected by a thin film of titanium dioxide. The photocathode reduces CO 2 to CO with high selectivity at potentials as mild as 0 V versus the reversible hydrogen electrode (vs RHE). Methanol production is observed at an onset potential of −0.36 V vs RHE, and reaches a peak turnover frequency of 0.18 s −1 . To date, this is the only molecular catalyst‐based photoelectrode that is active for the six‐electron reduction of CO 2 to methanol. This work puts forth a strategy for interfacing molecular catalysts to p‐type semiconductors and demonstrates state‐of‐the‐art performance for photoelectrochemical CO 2 reduction to CO and methanol.

Shang, Bo↗

DOE OSTI2023

Supramolecular Enhancement of Electrochemical Nitrate Reduction Catalyzed by Cobalt Porphyrin Organic Cages for Ammonia Electrosynthesis in Water**

Abstract The electrochemical nitrate (NO 3 − ) reduction reaction (NO 3 RR) to ammonia (NH 3 ) represents a sustainable approach for denitrification to balance global nitrogen cycles and an alternative to traditional thermal Haber‐Bosch processes. Here, we present a supramolecular strategy for promoting NH 3 production in water from NO 3 RR by integrating two‐dimensional (2D) molecular cobalt porphyrin ( CoTPP ) units into a three‐dimensional (3D) porous organic cage architecture. The porphyrin box CoPB‐C8 enhances electrochemical active site exposure, facilitates substrate–catalyst interactions, and improves catalyst stability, leading to turnover numbers and frequencies for NH 3 production exceeding 200,000 and 56 s −1 , respectively. These values represent a 15‐fold increase in NO 3 RR activity and 200‐mV improvement in overpotential for the 3D CoPB‐C8 box structure compared to its 2D CoTPP counterpart. Synthetic tuning of peripheral alkyl substituents highlights the importance of supramolecular porosity and cavity size on electrochemical NO 3 RR activity. These findings establish the incorporation of 2D molecular units into 3D confined space microenvironments as an effective supramolecular design strategy for enhancing electrocatalysis.

An, Lun↗

DOE OSTI2023

Cobalt‐Catalyzed Electroreductive Alkylation of Unactivated Alkyl Chlorides with Conjugated Olefins

Abstract Reactions of unactivated alkyl chlorides under mild and sustainable conditions are rare compared to those of alkyl bromides or iodides. As a result, synthetic methods capable of modifying the vast chemical space of chloroalkane reagents, wastes, and materials are limited. We report the cobalt‐catalyzed reductive addition of unactivated alkyl chlorides to conjugated alkenes. Co‐catalyzed activation of alkyl chlorides is performed under electroreductive conditions, and the resulting reactions constitute formal alkyl‐alkyl bond formation. In addition to developing an operationally simple methodology, detailed mechanistic studies provide insights into the elementary steps of a proposed catalytic cycle. In particular, we propose a switch in the mechanism of C−Cl bond activation from nucleophilic substitution to halogen atom abstraction, which is critical for efficiently generating alkyl radicals. These mechanistic insights were leveraged in designing ligands that enable couplings of primary, secondary, and tertiary alkyl chlorides.

Al Zubaydi, Samir↗

DOE OSTI2020

Supramolecular Tuning Enables Selective Oxygen Reduction Catalyzed by Cobalt Porphyrins for Direct Electrosynthesis of Hydrogen Peroxide

Abstract We report a supramolecular strategy for promoting the selective reduction of O 2 for direct electrosynthesis of H 2 O 2 . We utilized cobalt tetraphenylporphyrin (Co‐TPP), an oxygen reduction reaction (ORR) catalyst with highly variable product selectivity, as a building block to assemble the permanently porous supramolecular cage Co‐PB‐1(6) bearing six Co‐TPP subunits connected through twenty‐four imine bonds. Reduction of these imine linkers to amines yields the more flexible cage Co‐rPB‐1(6). Both Co‐PB‐1(6) and Co‐rPB‐1(6) cages produce 90–100 % H 2 O 2 from electrochemical ORR catalysis in neutral pH water, whereas the Co‐TPP monomer gives a 50 % mixture of H 2 O 2 and H 2 O. Bimolecular pathways have been implicated in facilitating H 2 O formation, therefore, we attribute this high H 2 O 2 selectivity to site isolation of the discrete molecular units in each supramolecule. The ability to control reaction selectivity in supramolecular structures beyond traditional host–guest interactions offers new opportunities for designing such architectures for a broader range of catalytic applications.

Smith, Peter T.↗

DOE OSTI2022

Aqueous Photoelectrochemical CO 2 Reduction to CO and Methanol over a Silicon Photocathode Functionalized with a Cobalt Phthalocyanine Molecular Catalyst

We report a precious-metal-free molecular catalyst-based photocathode that is active for aqueous CO 2 reduction to CO and methanol. The photoelectrode is composed of cobalt phthalocyanine molecules anchored on graphene oxide which is integrated via a (3-aminopropyl)triethoxysilane linker to p-type silicon protected by a thin film of titanium dioxide. The photocathode reduces CO 2 to CO with high selectivity at potentials as mild as 0 V versus the reversible hydrogen electrode (vs RHE). Methanol production is observed at an onset potential of –0.36 V vs RHE, and reaches a peak turnover frequency of 0.18 s –1 . To date, this is the only molecular catalyst-based photoelectrode that is active for the six-electron reduction of CO 2 to methanol. Furthermore, this work puts forth a strategy for interfacing molecular catalysts to p-type semiconductors and demonstrates state-of-the-art performance for photoelectrochemical CO 2 reduction to CO and methanol.

14 SOLAR ENERGY↗

DOE OSTI2023

Supramolecular Enhancement of Electrochemical Nitrate Reduction Catalyzed by Cobalt Porphyrin Organic Cages for Ammonia Electrosynthesis in Water**

Abstract The electrochemical nitrate (NO 3 − ) reduction reaction (NO 3 RR) to ammonia (NH 3 ) represents a sustainable approach for denitrification to balance global nitrogen cycles and an alternative to traditional thermal Haber‐Bosch processes. Here, we present a supramolecular strategy for promoting NH 3 production in water from NO 3 RR by integrating two‐dimensional (2D) molecular cobalt porphyrin ( CoTPP ) units into a three‐dimensional (3D) porous organic cage architecture. The porphyrin box CoPB‐C8 enhances electrochemical active site exposure, facilitates substrate–catalyst interactions, and improves catalyst stability, leading to turnover numbers and frequencies for NH 3 production exceeding 200,000 and 56 s −1 , respectively. These values represent a 15‐fold increase in NO 3 RR activity and 200‐mV improvement in overpotential for the 3D CoPB‐C8 box structure compared to its 2D CoTPP counterpart. Synthetic tuning of peripheral alkyl substituents highlights the importance of supramolecular porosity and cavity size on electrochemical NO 3 RR activity. These findings establish the incorporation of 2D molecular units into 3D confined space microenvironments as an effective supramolecular design strategy for enhancing electrocatalysis.

An, Lun↗

DOE OSTI2023

Active Sites of Cobalt Phthalocyanine in Electrocatalytic CO 2 Reduction to Methanol

Many metal coordination compounds catalyze CO 2 electroreduction to CO, but cobalt phthalocyanine hybridized with conductive carbon such as carbon nanotubes is currently the only one that can generate methanol. The underlying structure–reactivity correlation and reaction mechanism desperately demand elucidation. Here, in this study, we report the first in situ X-ray absorption spectroscopy characterization, combined with ex situ spectroscopic and electrocatalytic measurements, to study CoPc-catalyzed CO 2 reduction to methanol. Molecular dispersion of CoPc on CNT surfaces, as evidenced by the observed electronic interaction between the two, is crucial to fast electron transfer to the active sites and multi-electron CO 2 reduction. CO, the key intermediate in the CO 2 -to-methanol pathway, is found to be labile on the active site, which necessitates a high local concentration in the microenvironment to compete with CO 2 for active sites and promote methanol production. A comparison of the electrocatalytic performance of structurally related porphyrins indicates that the bridging aza-N atoms of the Pc macrocycle are critical components of the CoPc active site that produces methanol. In situ X-ray absorption spectroscopy identifies the active site as Co(I) and supports an increasingly non-centrosymmetric Co coordination environment at negative applied potential, likely due to the formation of a Co−CO adduct during the catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Cobalt‐Catalyzed Electroreductive Alkylation of Unactivated Alkyl Chlorides with Conjugated Olefins

Abstract Reactions of unactivated alkyl chlorides under mild and sustainable conditions are rare compared to those of alkyl bromides or iodides. As a result, synthetic methods capable of modifying the vast chemical space of chloroalkane reagents, wastes, and materials are limited. We report the cobalt‐catalyzed reductive addition of unactivated alkyl chlorides to conjugated alkenes. Co‐catalyzed activation of alkyl chlorides is performed under electroreductive conditions, and the resulting reactions constitute formal alkyl‐alkyl bond formation. In addition to developing an operationally simple methodology, detailed mechanistic studies provide insights into the elementary steps of a proposed catalytic cycle. In particular, we propose a switch in the mechanism of C−Cl bond activation from nucleophilic substitution to halogen atom abstraction, which is critical for efficiently generating alkyl radicals. These mechanistic insights were leveraged in designing ligands that enable couplings of primary, secondary, and tertiary alkyl chlorides.

Al Zubaydi, Samir↗

DOE OSTI2024

Stabilizing *CO 2 Intermediates at the Acidic Interface using Molecularly Dispersed Cobalt Phthalocyanine as Catalysts for CO 2 Reduction

Abstract CO 2 electroreduction (CO 2 R) operating in acidic media circumvents the problems of carbonate formation and CO 2 crossover in neutral/alkaline electrolyzers. Alkali cations have been universally recognized as indispensable components for acidic CO 2 R, while they cause the inevitable issue of salt precipitation. It is therefore desirable to realize alkali‐cation‐free CO 2 R in pure acid. However, without alkali cations, stabilizing *CO 2 intermediates by catalyst itself at the acidic interface poses as a challenge. Herein, we first demonstrate that a carbon nanotube‐supported molecularly dispersed cobalt phthalocyanine (CoPc@CNT) catalyst provides the Co single‐atom active site with energetically localizeddstates to strengthen the adsorbate‐surface interactions, which stabilizes *CO 2 intermediates at the acidic interface (pH=1). As a result, we realize CO 2 conversion to CO in pure acid with a faradaic efficiency of 60 % at pH=2 in flow cell. Furthermore, CO 2 is successfully converted in cation exchanged membrane‐based electrode assembly with a faradaic efficiency of 73 %. For CoPc@CNT, acidic conditions also promote the intrinsic activity of CO 2 R compared to alkaline conditions, since the potential‐limiting step, *CO 2 to *COOH, is pH‐dependent. This work provides a new understanding for the stabilization of reaction intermediates and facilitates the designs of catalysts and devices for acidic CO 2 R.

Chemistry↗

DOE OSTI2021

Hydrogen Evolution Mediated by Cobalt Diimine‐Dioxime Complexes: Insights into the Role of the Ligand Acid/Base Functionalities.

Abstract The benchmarking of the performance for H 2 evolution of cobalt diimine‐dioxime catalysts is provided based on a comprehensive study of their catalytic mechanism. The latter follows an ECE'CC pathway with intermediate formation of a Co(II)‐hydride intermediate and second protonation possibly at a basic site of the ligand, acting as a proton relay. This suggests an intramolecular coupling between the hydride and protonated ligand as the proton concentration‐independent rate‐determining step controlling the turnover frequency for H 2 evolution.

Sun, Dongyue↗

DOE OSTI2020

Hybrid Carbon Dioxide Reduction Photocatalysts Consisting of Macrocyclic Cobalt(III) Complexes Deposited on Semiconductor Surfaces

Hybrid photocatalysts can be prepared by coupling metal ligand complexes with light-harvesting semiconductors. It is often challenging and time consuming to derivatize ligands with anchoring groups to effectively attach onto surfaces. In this study, we synthesized hybrid carbon dioxide reduction photocatalysts by directly depositing two macrocyclic Co(III) complexes on three different semiconductor surfaces (TiO 2 , N-Ta 2 O 5 and C 3 N 4 ). The resulting hybrid photocatalysts were characterized with various techniques and tested in CO 2 reduction reactions under different light conditions. Excellent visible-light CO 2 -reduction activity was obtained using C 3 N 4 as the light-harvesting semiconductor. Furthermore, density functional theory calculations were conducted to help understand interactions between the cobalt complexes with a model TiO 2 surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Reciprocal Ternary Molten Salts Enable the Direct Upcycling of Spent Lithium‐Nickel‐Manganese‐Cobalt Oxide (NMC) Mixtures to Make NMC 622

Cathode active material is the most valuable component of spent lithium‐ion batteries, accounting for ≈30% of their overall value. Direct recycling of cathode materials involves recovering, regenerating, and reusing them without breaking down their chemical structure. This approach maximizes the added value of the cathode compound and reduces manufacturing costs by avoiding the need for virgin material production. However, one key challenge in scaling direct recycling from lab to industry is the requirement for highly purified cathode materials, contrasting with the low purity of black mass generated from battery shredding. No efficient separation process currently exists to isolate different lithium‐nickel‐manganese‐cobalt oxides (NMCs) from each other. Thus, direct recycling technologies that can operate with mixtures of multiple NMC stoichiometries will be best‐suited for industrial adoption. This study explores the direct recycling of NMC mixtures into NMC 622 using a “reciprocal ternary molten salts (RTMS)” system. Ionothermal relithiation and upcycling within the RTMS system successfully restore the layered structure, lithium content, and electrochemical performance of degraded NMCs, yielding results comparable to pristine NMC 622 (P‐NMC 622).

25 ENERGY STORAGE↗

DOE OSTI2023

Surface analysis insight note: X‐ray photoelectron spectroscopy analysis of battery electrodes—Challenges with nickel–manganese–cobalt and Li examples using an Al Kα x‐ray source

X‐ray photoelectron spectroscopy (XPS) has become a highly important tool for the analysis of battery materials and components. However, both anecdotal and detailed analysis of selected parts of the literature indicate that many reports of XPS on battery electrodes have significant analysis or data flaws. In this paper, we highlight several of the common challenges that analysts face when using XPS for battery materials, pointing to recent literature that addresses many of the critical issues associated with sample preparation as well as data collection and analysis. A common error for battery materials (and other materials) involves ignoring peak overlaps and interferences. Specifically, when a “minor” peak associated with a component in relatively high concentration overlaps or contributes to the primary peak (or one recommended for quantitative analysis) from a different element in the material. Overlap issues apply to many battery electrodes composed of many elements with complex photoelectron peak structures, as well as those involving peaks with seemingly simpler spectral envelopes such as Li and F. Examples of issues associated with battery systems are highlighted by a discussion of challenges associated with XPS analysis of Li and nickel–manganese–cobalt (NMC) electrodes in battery systems. Lithium analysis has challenges associated with the preparation and an often‐unrecognized peak overlap with F. In our laboratory and in the literature, NMC electrodes are often examined and new XPS users do not always recognize interference of the Auger signal from F KLL (in or on the electrode) with Ni 2p photoelectron spectrum when generated with Al Kα X‐rays. The use of simulated spectra involving both F and NiO demonstrates the extent of F Auger contributions to the Ni 2p signal strength as a function of the F/Ni atom ratio in the material and suggests spectra information that can be used to identify how significant effects will be on the resultant spectra. Our analysis demonstrates that in many cases overlap issues are significant for real electrode materials.

25 ENERGY STORAGE↗

DOE OSTI2020

Organometallic Synthesis of Bimetallic Cobalt‐Rhodium Nanoparticles in Supported Ionic Liquid Phases (Co x Rh 100− x @SILP) as Catalysts for the Selective Hydrogenation of Multifunctional Aromatic Substrates

Abstract The synthesis, characterization, and catalytic properties of bimetallic cobalt‐rhodium nanoparticles of defined Co:Rh ratios immobilized in an imidazolium‐based supported ionic liquid phase (Co x Rh 100− x @SILP) are described. Following an organometallic approach, precise control of the Co:Rh ratios is accomplished. Electron microscopy and X‐ray absorption spectroscopy confirm the formation of small, well‐dispersed, and homogeneously alloyed zero‐valent bimetallic nanoparticles in all investigated materials. Benzylideneacetone and various bicyclic heteroaromatics are used as chemical probes to investigate the hydrogenation performances of the Co x Rh 100− x @SILP materials. The Co:Rh ratio of the nanoparticles is found to have a critical influence on observed activity and selectivity, with clear synergistic effects arising from the combination of the noble metal and its 3d congener. In particular, the ability of Co x Rh 100− x @SILP catalysts to hydrogenate 6‐membered aromatic rings is found to experience a remarkable sharp switch in a narrow composition range between Co 25 Rh 75 (full ring hydrogenation) and Co 30 Rh 70 (no ring hydrogenation).

Rengshausen, Simon↗