Search NASA⌕ Search

SEARCH · Search NASA

Results for “nodule”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

Hibonite, Ca2/Al, Ti/24O38, from the Leoville and Allende chondritic meteorites.

Hibonite was discovered in light-colored, Ca-Al-Ti-rich and Si-Fe-poor, achondritic inclusions of the Leoville and Allende HL-group chondrites. Two varieties of hibonite occur: one emits a bright red-orange luminescence under electron bombardment and has high amounts of Al2O3 (87.7; 87.9) and low amounts of MgO (0.65; 0.8) and TiO2 (0.68; 0.8). The other emits a bright blue luminescence and is low in Al2O3 (78.7; 79.2) and high in MgO (3.3; 3.7) and TiO2 (6.5; 7.9) (in wt. %). The oxide CaO is about the same in both varieties. It is suggested that the change in the color of the visible luminescence results from changes in composition. The origin of hibonite which occurs in complex mineral assemblages together with anorthite, gelhenite, wollastonite, aluminous diopside, andradite, Ca-pyroxene, perovskite, spinel, taenite, chromite, and pentlandite, and in close proximity to nodules containing calcite, whewellite, forsterite and many of the aforementioned phases, is discussed. The proposition that hibonite and associated phases originated by contact metamorphism and metasomatism of calcite-dolomite bearing assemblages cannot, at this time, be completely ruled out.

Keil, K.↗
NASA NTRS1974

Structure and function of an inorganic-organic separator for electrochemical cells: Preliminary study

The structure of a new separator material for electrochemical cells has been investigated. Investigation into details of the separator structure showed it to be multilayered and to consist mainly of a quasi-impervious organic skin, a porous region of mixed organic and inorganic material, and an area of nonuniformly treated substrate. The essential feature of the coating (slurry) is believed to be interconnected pores which allow ionic conductivity. The interconnected pores are believed to be formed by the interaction of the plasticizer and inorganic fibers. The major failure mode of silver zinc cells using such a separator (zinc nodules shorting adjacent plates) was investigated.

Bozek, J. M.↗
NASA NTRS1972

Fluorescent antibody detection of microorganisms in terrestrial environments

The fluorescent antibody technique and its use in direct microscopic examination of the soil is discussed. Feasibility analyses were made to determine if the method could be used to simultaneously observe and recognize microorganisms in the soil. Some data indicate this may be possible. Data are also given on two related problems involving the interaction of soil microorganisms with plant roots to form symbiotic structures. One was concerned with the developmental ecology and biology of the root nodule of alder and the second was concerned with the ectotrophic mycorrhizal structure on forest trees, especially pines. In both, the fluorescent antibody detection of the microbial symbiont both as a free living form in soil, and as a root inhabiting form in the higher plant was emphasized. A third aspect of the research involved the detection of autotrophic ammonia oxidizing microorganisms in soil.

Schmidt, E. L.↗
NASA NTRS1975

Morphological growth of sputtered MoS2 films

Sputtered MoS2 films from 300 A to 20,000 A thick were deposited on metal and glass surfaces. The substrate effects such as surface temperature, finish, pretreatment and chemistry as they affect the film formation characteristics were investigated by optical, electron transmission, electron diffraction, and scanning electron microscopy. Substrate temperature and surface chemistry were found to be the prime variables as to the formation of a crystalline or amorphous film. The friction characteristics are strictly influenced by the type of film formed. Surface chemistry and surface pretreatment account for compound formation and corresponding grain growth, which directly affect the adhesion characteristics, resulting in poor adherence. The type of surface finish (topography) as related to scratches, impurities, inhomogeneities, etc., are favorable nucleation sites for the growth of isolated and complex nodules within the film, and various complex surface overgrowths on the film. These nodular growth features have progressively more undesirable effects on the film behavior as the film thickness increases.

Spalvins, T.↗
NASA NTRS1974

International Symposium on Applications of Marine Geodesy, Columbus, Ohio, June 3-5, 1974, Proceedings

Requirements for marine geodesy are examined, taking into account accuracy requirements for certain marine operations, boundary and positioning problems in offshore Norway, navigation requirements for nodule exploration and mining, and the determination of marine boundaries at sea. Subjects related to marine geodesy and positioning/navigation are discussed along with topics concerned with marine geodesy and ocean physics. Satellite altimetry and modern geoids method are considered and attention is given to marine gravity anomalies and geodesy. Individual items are announced in this issue.

Source record↗
NASA NTRS1975

Ilmenite-orthopyroxene intergrowths from the moon and the Skaergaard intrusion

Myrmekitic or eutectic-like intergrowths of ilmenite and orthopyroxene, which texturally resemble intergrowths from nodules in kimberlites have been observed in lunar breccia 60016,92 and in 'Lower Zone' a of the Skaergaard intrusion. The lunar sample is similar in mineral chemistry to kimberlife occurrences, while the Skaergaard sample is not as Mg-rich. In all cases, however, there is a systematic distribution of Mg between orthopyroxene and ilmenite. The similar textures were formed by different processes: the lunar intergrowth is probably a eutectic-type texture resulting from crystallization of a melt, while the Skaergaard intergrowth formed by a process of sub-solidus oxidation.

Haselton, J. D.↗
NASA NTRS1975

Morphological growth of sputtered MoS2 films

Sputtered MoS2 films from 300 A to 20,000 A thick were deposited on metal and glass surfaces. The substrate effects such as surface temperature, finish, pretreatment, and chemistry as they affect the film formation characteristics were investigated by optical, electron transmission, electron diffraction, and scanning electron microscopy. Substrate temperature and surface chemistry were found to be the prime variables as to the formation of a crystalline or amorphous film. The friction characteristics are strictly influenced by the type of film formed. Surface chemistry and surface pretreatment account for compound formation and corresponding grain growth, which directly affect the adhesion characteristics, resulting in poor adherence. Scratches, impurities, inhomogeneities, etc., are favorable nucleation sites for the growth of isolated and complex nodules within the film.

Spalvins, T.↗
NASA NTRS1977

Analysis of ablation debris from natural and artificial iron meteorites

Artificial ablation studies were performed on iron and nickel-iron samples using an arc-heated plasma of ionized air. Experiment conditions simulated a meteoroid traveling about 12 km/sec at an altitude of 70 km. The artificially produced fusion crusts and ablation debris show features very similar to natural fusion crusts of the iron meteorites Boguslavka, Norfork, and N'Kandhla and to magnetic spherules recovered from Mn nodules. X-ray diffraction, electron microprobe, optical, and scanning electron microscope analyses reveal that important mineralogical, elemental, and textural changes occur during ablation. Some metal is melted and ablated. The outer margin of the melted rind is oxidized and recrystallizes as a discontinuous crust of magnetite and wustite. Adjacent to the oxidized metallic ablation zone is an unoxidized metallic ablation zone in which structures such as Widmannstatten bands are obliterated as the metal is transformed to unequilibrated alpha 2 nickel-iron. Volatile elements are vaporized and less volatile elements undergo fractionation.

Blanchard, M. B.↗
NASA NTRS1976

Pyroxene-spinel intergrowths in lunar and terrestrial pyroxenes

The paper describes the oriented intergrowth of spinel and pyroxene in a pigeonite from Luna 20, an augite from Apollo 16 anorthosite 67075, and an orthopyroxene from a spinel lherzolite nodule from the San Quintin volcanic field, Mexico. Using Mo K alpha radiation, photographs were taken of small, hand-picked single-crystals. A mechanism of exsolution is suggested in which the oxygen framework remains intact and spinel nuclei are formed by the migration of cations from interstitial sites and tetrahedral sites in the original non-stoichiometric pyroxene.

Okamura, F. P.↗
NASA NTRS1977

Saturn's rings - A new survey

Observations of radar returns from Saturn's rings, together with radio interferometry of their absorption of radiation from the disk, combine to require an effective radius of ring particles of about 6 cm or larger. It is suggested that the ring particles may also include, in addition to the known ice constituent, a mixture of the clathrated hydrate of methane and ammonia hydrate. A two-density model for ring particles is possible in which a matrix of low density contains many nodules of higher-density ice particles; in this case, radii nearly as large as the observed ring thickness would be possible. Improved resolution in radio observations at 21 cm or, if necessary, at longer wavelengths for narrow ring openings is perhaps the most useful method for determining upper limits on the particle size.

Cook, A. F.↗
NASA NTRS1978

Morphology of gold and copper ion-plated coatings

Copper and gold films (0.2 to 2 microns thick) were ion plated onto polished 304-stainless-steel, glass, mica surfaces. These coatings were examined by SEM for defects in their morphological growth. Three types of defects were distinguished: nodular growth, abnormal or runaway growth, and spits. The cause for each type of defect was investigated. Nodular growth is due to inherent substrate microdefects, abnormal or runaway growth is due to external surface inclusions, and spits are due to nonuniform evaporation (ejection of droplets). All these defects induce stresses and produce porosity in the coatings and thus weaken their mechanical properties. During surface rubbing, large nodules are pulled out, leaving vacancies in the coatings.

Spalvins, T.↗
NASA NTRS1977

Effects of silicon on the oxidation, hot-corrosion, and mechanical behavior of two cast nickel-base superalloys

Cast specimens of nickel-base superalloys 713C and Mar-M200 with nominal additions of 0, 0.5, and 1 wt% Si were evaluated for oxidation and corrosion resistance, tensile and stress-rupture properties, microstructure, and phase relations. Results are compared with those of an earlier study of the effects of Si in B-1900. Si had similar effects on all three superalloys. It improves oxidation resistance but the improvement in 713C and Mar-M200 was considerably less than in B-1900. Hot-corrosion resistance is also improved somewhat. Si is, however, detrimental to mechanical properties, in particular, rupture strength and tensile ductility. Si has two obvious microstructural effects. It increases the amount of gamma-prime precipitated in eutectic nodules and promotes a Mo(Ni,Si)2 Laves phase in the alloys containing Mo. These microstructural effects do not appear responsible for the degradation of mechanical properties, however.

Miner, R. V., Jr.↗
NASA NTRS1977

Regimes for the ocean, outer space, and weather

The allocation of resources among users of the oceans, outer space and the weather is discussed. Attention is given to the international management of maritime navigation, the control of fisheries, offshore oil and gas exploitation, mineral exploitation in the deep seabed (especially the mining of manganese nodules), and the regulation of oceanographic studies. The management of outer space is considered, with special reference to remote sensing by satellites, television broadcasting, the technical requirements of maritime satellites, and problems associated with satellite frequency and orbit allocation. Rainmaking and typhoon modification, as well as the distribution of weather modification capabilities in the world, are also mentioned. The United Nations, international agencies and tribunals, and multi- or bilateral agreements are some of the implements suggested for use in the regulation of the oceans, outer space and the weather.

Brown, S.↗
NASA NTRS1978

Analysis of ablation debris from natural and artificial iron meteorites

Iron and nickel-iron samples subjected to treatment by an arc-heated plasma of ionized air were used to model meteor ablation. The artificial ablation debris and fusion crusts were compared to the fusion crusts of three natural iron meteorities and to magnetic spherules from deep-sea manganese nodules. An outer discontinuous crust of magnetite and wuestite, followed by an unoxidized metallic zone, was observed in the artificially produced samples. Fractionation of less volatile elements was also noted.

Blanchard, M. B.↗
NASA NTRS1978

Tysnes Island - An unusual clast composed of solidified, immiscible, Fe-FeS and silicate melts

An inclusion found in the Tysnes Island gas-rich H4 chondrite is described. The clast consists of two distinct portions, separated by a smooth boundary; the portions are a tear-drop shaped Fe-FeS eutecticlike intergrowth (0.5 cm greatest dimension) and a silicate consisting primarily of olivine in glass. Nickel enrichment is found in the metal at the metal-sulfide boundaries and in nodules within the metal. It is thought that the portions separated from one another as immiscible liquids and that the modal composition of each portion agrees with the compositions predicted for a total melt of an H-group chondrite. The inclusion is discussed in terms of the process of metal-silicate fractionation suggested by Fodor and Keil (1976).

Wilkening, L. L.↗
NASA NTRS1979

Characterization of defect growth structure in ion plated films by scanning electron microscopy

Copper and gold films (0.2 to 2 microns) were ion plated onto polished 304-stainless-steel surfaces. These coatings were examined by scanning electron microscopy for coating growth defects. Three types of defects were distinguished: nodular growth, abnormal or runaway growth, and spits. The cause and origin for each type of defect was traced. Nodular growth is primarily due to inherent substrate microdefects, abnormal or runaway growth is due to external surface inclusions, and spits are due to nonuniform evaporation. All these defects have adverse effects on the coatings. They induce stresses and produce porosity in the coatings and thus weaken their mechanical properties. Friction and wear characteristics are affected by coating defects, since the large nodules are pulled out and additional wear debris is generated.

Spalvins, T.↗
NASA NTRS1981

Partitioning REE between minerals and coexisting melts during partial melting of a garnet lherzolite

Partition coefficients for Ce, Sm, and Tm between garnet, clinopyroxene, orthopyroxene, olivine, and melt are determined at 35 kbar for 2.3, 8, 20, and 37.7% melting of a garnet lherzolite nodule with chondritic REE abundances. Partition coefficients are found to increase as the degree of partial melting increases. From 2.3 to 8% melting, this increase is for the most part a consequence of non-Henry's law behavior of REE in minerals.

Harrison, W. J.↗
NASA NTRS1983

Evaluation of low-cost aluminum composites for aircraft engine structural applications

Panels of discontinuous SiC composites, with several aluminum matrices, were fabricated and evaluated. Modulus, yield strength and tensile strength results indicated that the properties of composites containing SiC whisker, nodule or particulate reinforcements were similar. The modulus of the composites was controlled by the volume percentage of the SiC reinforcement content, while the strength and ductility were controlled by both the reinforcement content and the matrix alloy. The feasibility of fabricating structural shapes by both wire performs and direct casting was demonstrated for Al2O3/Al composites. The feasibility of fabricating high performance composites into structural shapes by low pressure hot molding was demonstrated for B4C-coated B/Al composites.

Mcdanels, D. L.↗