Search NASA⌕ Search

SEARCH · Search NASA

Results for “object positioning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

A gravitational lens candidate with an unusually red optical counterpart

The properties of the strong radio source MG0414 + 0534 are described. It is found to display many of the properties expected in a gravitational lens system. At radio wavelengths and 0.5-arcsec resolution, MG0414 + 0534 is made up of four compact components whose unusual configuration and relative flux densities are similar to those found in confirmed four-image gravitational lens systems. At optical wavelengths three objects are detected, consistent with there being optical objects at the positions of the radio components, given the lower optical resolution. The radio and optical centroid positions agree within the astrometric errors, and the relative ordering of the fluxes is the same. The colors and radiooptical spectral indices are similar, but there are differences larger than the photometric errors and the measured variability (about 30 percent). Extinction by dust might simultaneously explain the unusually red color and the absence of light from a lens.

Hewitt, J. N.↗
NASA NTRS1992

Bias correction factors for near-Earth asteroids

Knowledge of the population size and physical characteristics (albedo, size, and rotation rate) of near-Earth asteroids (NEA's) is biased by observational selection effects which are functions of the population's intrinsic properties and the size of the telescope, detector sensitivity, and search strategy used. The NEA population is modeled in terms of orbital and physical elements: a, e, i, omega, Omega, M, albedo, and diameter, and an asteroid search program is simulated using actual telescope pointings of right ascension, declination, date, and time. The position of each object in the model population is calculated at the date and time of each telescope pointing. The program tests to see if that object is within the field of view (FOV = 8.75 degrees) of the telescope and above the limiting magnitude (V = +1.65) of the film. The effect of the starting population on the outcome of the simulation's discoveries is compared to the actual discoveries in order to define a most probable starting population.

Benedix, Gretchen K.↗
NASA NTRS1994

Materials for efficient high-flux magnetic bearing actuators

Magnetic bearings have demonstrated the capability for achieving positioning accuracies at the nanometer level in precision motion control stages. This makes possible the positioning of a wafer in six degrees of freedom with the precision necessary for photolithography. To control the position of an object at the nanometer level, a model of the magnetic bearing actuator force-current-airgap relationship must be accurately obtained. Additionally, to reduce thermal effects the design of the actuator should be optimized to achieve maximum power efficiency and flux density. Optimization of the actuator is accomplished by proper pole face sizing and utilizing a magnetic core material which can be magnetized to the highest flux density with low magnetic loss properties. This paper describes the construction of a magnetic bearing calibration fixture designed for experimental measurement of the actuator force characteristics. The results of a material study that review the force properties of nickel-steel, silicon-steel, and cobalt-vanadium-iron, as they apply to magnetic bearing applications are also presented.

Williams, M. E.↗
NASA NTRS1995

A search for T Tauri stars in high-latitude molecular clouds. 2: The IRAS Faint Source Survey catalog

We present a catalog of infrared point sources from the IRAS Faint Source Survey at Galactic latitudes the absolute magnitude of b is greater than or equal to 30 deg. The aim of this paper is to provide a list of possible star-forming sites at high Galactic latitudes in order to address the question of whether or not the translucent molecular clouds (which are most easily identified at high latitudes) are capable of star formation. The primary list of sources has 12, 25, 60, and 100 micron fluxes within the range typical of pre-main-sequence or T Tauri stars. A secondary list has the same range of 12, 25, and 60 micron fluxes, but only upper limits at 100 microns. A total of 127 candidates from the first category and 65 candidates from the second category are identified and their positions and infrared spectral characteristics tabulated. Although the colors and fluxes of these sources are typical of T Tauri or pre-main-sequence stars and YSOs, extragalactic sources and planetary nebulae sometimes have similar colors. These lists provide a starting point for optical spectroscopy or other techniques to positively identify these objects. We can determine an upper limit to the star forming efficiency of high-latitude molecular clouds assuming all the candidates in our sample are pre-main sequence stars of one solar mass. The upper limit of a few tenths of 1% is less than the star-forming efficiency of local dark cloud complexes such as the Taurus-Auriga or rho Ophiuchus clouds.

Magnani, Loris↗
NASA NTRS1996

Off-the-shelf real-time monitoring of satellite constellations in a visual 3-D environment

The multimission spacecraft analysis system (MSAS) data monitor is a generic software product for future real-time data monitoring and analysis. The system represents the status of a satellite constellation through the shape, color, motion and position of graphical objects floating in a three dimensional virtual reality environment. It may be used for the monitoring of large volumes of data, for viewing results in configurable displays, and for providing high level and detailed views of a constellation of monitored satellites. It is considered that the data monitor is an improvement on conventional graphic and text-based displays as it increases the amount of data that the operator can absorb in a given period, and can be installed and configured without the requirement for software development by the end user. The functionality of the system is described, including: the navigation abilities; the representation of alarms in the cybergrid; limit violation; real-time trend analysis, and alarm status indication.

Schwuttke, Ursula M.↗
NASA NTRS1999

Protecting the GEO Environment: Policies and Practices

The geosynchronous orbital regime has long been recognized as a unique space resource, dictating special measures to ensure its continuing use for future generations. During the past 20 years a variety of national and international policies have been developed to preserve this environment. A review of current practices involving the deployment and disposal of geosynchronous spacecraft, associated upper stages and apogee kick motors, and geosynchronous orbit transfer objects indicates both positive and negative trends. Most spacecraft operators are indeed performing end-of-mission maneuvers, but the boost altitudes normally fall short of policy guidelines. Russia, a major operator in geosynchronous orbit, maneuvers only 1 in 3 spacecraft out of the region, while China has never refired a spacecraft above GEO. The viability of voluntary protection measures for this regime depends upon the responsible actions of the aerospace community as a whole.

Johnson, Nicholas L.↗
NASA NTRS2000

Space Interferometry Mission Instrument Mechanical Layout

The Space Interferometry Mission, planned for launch in 2006, will measure the positions of celestial objects to an unprecedented accuracy of 4x10 to the power of negative six arc (about 1 billionth of a degree).

SIM space interferometry mission↗
NASA NTRS2004

Method and apparatus for two-dimensional absolute optical encoding

This invention presents a two-dimensional absolute optical encoder and a method for determining position of an object in accordance with information from the encoder. The encoder of the present invention comprises a scale having a pattern being predetermined to indicate an absolute location on the scale, means for illuminating the scale, means for forming an image of the pattern; and detector means for outputting signals derived from the portion of the image of the pattern which lies within a field of view of the detector means, the field of view defining an image reference coordinate system, and analyzing means, receiving the signals from the detector means, for determining the absolute location of the object. There are two types of scale patterns presented in this invention: grid type and starfield type.

Leviton, Douglas B.↗
NASA NTRS2007

NASA Tech Briefs, December 2007

Topics include: Ka-Band TWT High-Efficiency Power Combiner for High-Rate Data Transmission; Reusable, Extensible High-Level Data-Distribution Concept; Processing Satellite Imagery To Detect Waste Tire Piles; Monitoring by Use of Clusters of Sensor-Data Vectors; Circuit and Method for Communication Over DC Power Line; Switched Band-Pass Filters for Adaptive Transceivers; Noncoherent DTTLs for Symbol Synchronization; High-Voltage Power Supply With Fast Rise and Fall Times; Waveguide Calibrator for Multi-Element Probe Calibration; Four-Way Ka-Band Power Combiner; Loss-of-Control-Inhibitor Systems for Aircraft; Improved Underwater Excitation-Emission Matrix Fluorometer; Metrology Camera System Using Two-Color Interferometry; Design and Fabrication of High-Efficiency CMOS/CCD Imagers; Foam Core Shielding for Spacecraft CHEM-Based Self-Deploying Planetary Storage Tanks Sequestration of Single-Walled Carbon Nanotubes in a Polymer PPC750 Performance Monitor Application-Program-Installer Builder Using Visual Odometry to Estimate Position and Attitude Design and Data Management System Simple, Script-Based Science Processing Archive Automated Rocket Propulsion Test Management Online Remote Sensing Interface Fusing Image Data for Calculating Position of an Object Implementation of a Point Algorithm for Real-Time Convex Optimization Handling Input and Output for COAMPS Modeling and Grid Generation of Iced Airfoils Automated Identification of Nucleotide Sequences Balloon Design Software Rocket Science 101 Interactive Educational Program Creep Forming of Carbon-Reinforced Ceramic-Matrix Composites Dog-Bone Horns for Piezoelectric Ultrasonic/Sonic Actuators Benchtop Detection of Proteins Recombinant Collagenlike Proteins Remote Sensing of Parasitic Nematodes in Plants Direct Coupling From WGM Resonator Disks to Photodetectors Using Digital Radiography To Image Liquid Nitrogen in Voids Multiple-Parameter, Low-False-Alarm Fire-Detection Systems Mosaic-Detector-Based Fluorescence Spectral Imager Plasmoid Thruster for High Specific-Impulse Propulsion Analysis Method for Quantifying Vehicle Design Goals Improved Tracking of Targets by Cameras on a Mars Rover Sample Caching Subsystem Multistage Passive Cooler for Spaceborne Instruments GVIPS Models and Software Stowable Energy-Absorbing Rocker-Bogie Suspensions

Source record↗
NASA NTRS2007

Optoelectronic System Measures Distances to Multiple Targets

An optoelectronic metrology apparatus now at the laboratory-prototype stage of development is intended to repeatedly determine distances of as much as several hundred meters, at submillimeter accuracy, to multiple targets in rapid succession. The underlying concept of optoelectronic apparatuses that can measure distances to targets is not new; such apparatuses are commonly used in general surveying and machining. However, until now such apparatuses have been, variously, constrained to (1) a single target or (2) multiple targets with a low update rate and a requirement for some a priori knowledge of target geometry. When fully developed, the present apparatus would enable measurement of distances to more than 50 targets at an update rate greater than 10 Hz, without a requirement for a priori knowledge of target geometry. The apparatus (see figure) includes a laser ranging unit (LRU) that includes an electronic camera (photo receiver), the field of view of which contains all relevant targets. Each target, mounted at a fiducial position on an object of interest, consists of a small lens at the output end of an optical fiber that extends from the object of interest back to the LRU. For each target and its optical fiber, there is a dedicated laser that is used to illuminate the target via the optical fiber. The targets are illuminated, one at a time, with laser light that is modulated at a frequency of 10.01 MHz. The modulated laser light is emitted by the target, from where it returns to the camera (photodetector), where it is detected. Both the outgoing and incoming 10.01-MHz laser signals are mixed with a 10-MHz local-oscillator to obtain beat notes at 10 kHz, and the difference between the phases of the beat notes is measured by a phase meter. This phase difference serves as a measure of the total length of the path traveled by light going out through the optical fiber and returning to the camera (photodetector) through free space. Because the portion of the path length inside the optical fiber is not ordinarily known and can change with temperature, it is also necessary to measure the phase difference associated with this portion and subtract it from the aforementioned overall phase difference to obtain the phase difference proportional to only the free-space path length, which is the distance that one seeks to measure. Therefore, the apparatus includes a photodiode and a circulator that enable measurement of the phase difference associated with propagation from the LRU inside the fiber to the target, reflection from the fiber end, and propagation back inside the fiber to the LRU. Because this phase difference represents twice the optical path length of the fiber, this phase difference is divided in two before subtraction from the aforementioned total-path-length phase difference. Radiation-induced changes in the photodetectors in this apparatus can affect the measurements. To enable calibration for the purpose of compensation for these changes, the apparatus includes an additional target at a known short distance, located inside the camera. If the measured distance to this target changes, then the change is applied to the other targets.

Liebe, Carl Christian↗
NASA NTRS2014

Photogrammetry System and Method for Determining Relative Motion Between Two Bodies

A photogrammetry system and method provide for determining the relative position between two objects. The system utilizes one or more imaging devices, such as high speed cameras, that are mounted on a first body, and three or more photogrammetry targets of a known location on a second body. The system and method can be utilized with cameras having fish-eye, hyperbolic, omnidirectional, or other lenses. The system and method do not require overlapping fields-of-view if two or more cameras are utilized. The system and method derive relative orientation by equally weighting information from an arbitrary number of heterogeneous cameras, all with non-overlapping fields-of-view. Furthermore, the system can make the measurements with arbitrary wide-angle lenses on the cameras.

Miller, Samuel A.↗
NASA NTRS1996

Off-the-Shelf Real-Time Monitoring of Satellite Constellations in a Visual 3-D Environment

The MSAS Data Monitor is a generic software product that represents the next-generation in real-time data monitoring and analysis tools. It goes beyond conventional text-based displays by representing data in a unique graphical form, conveying system status through the shape, color, motion, and position of graphical objects floating in a three-dimensional cyberspace environment...This paper describes some of the details and benefits of the MSAS monitoring and analysis suite, with primary focus on the Data Monitor.

MSAS↗
NASA NTRSDate not supplied

Development Strategies for Uncertainty Quantification to Enable Aircraft Certification by Analysis

Aircraft Certification by Analysis (CbA) is a broad term that describes the process by which engineering analysis tools are used to supplement flight testing to demonstrate compliance with regulatory requirements. For each requirement that is to be met through this process, the analysis tools must be sufficiently accurate to ensure that an equivalent level of safety is obtained as if the aircraft to be certified had been flight tested for the requirement. In recent decades, the ability of analysis tools to accurately predict aircraft performance has improved dramatically, leading to increasing interest and limited early adoption of Certification by Analysis across the aerospace industry. However, rigorously demonstrating the credibility of analysis tools remains a challenge for many types of certification requirements, yet is necessary for widespread adoption of CbA approaches in the future. The field of uncertainty quantification is well-suited to address this problem, but will require substantial advances in order to achieve the ambitious industry goals for Certification by Analysis. The objective of this position paper is to highlight gaps in the current technical and programmatic state of uncertainty quantification. Four main categories – Mindset & Awareness, Tools & Capabilities, Data and Benchmarks for V&V, and Applied Research & Established Processes – will be introduced. Each of these categories contains several shortcomings and impediments which, if overcome, will enable more widespread possibilities for Certification by Analysis in the 2040-2050 timeframe.

Uncertainty Quantification↗
NASA NTRS1989

Synthetic Estimation Filters For Determination Of Position

Concept of synthetic estimation filter (SEF) proposed to extend concept of matched filter from mere recognition of object to recognition of position and orientation relative to observing apparatus. Optical filter of this general type correlated with input image to obtain signal indicative of match between input and filter images.

Juday, Richard D.↗
NASA NTRS1996

Hubble Space Telescope Imaging of Bright Galactic X-Ray Binaries in Crowded Fields

We report high spatial resolution HST imagery and photometry of three well-studied, intense Galactic X-ray binaries, X2129+470, CAL 87, and GX 17+2. All three sources exhibit important anomalies that are not readily interpreted by conventional models. Each source also lies in a severely crowded field, and in all cases the anomalies would be removed if much of the light observed from the ground in fact came from a nearby, thus far unresolved superposed companion. For V1727 Cyg (X2129+470), we find no such companion. We also present an HST FOS spectrum and broadband photometry which is consistent with a single, normal star. The supersoft LMC X-ray source CAL 87 was already known from ground-based work to have a companion separated by O.9 minutes from the optical counterpart; our HST images clearly resolve these objects and yield the discovery of an even closer, somewhat fainter additional companion. Our photometry indicates that contamination is not severe outside eclipse, where the companions only contribute 20% of the light in V, but during eclipse more than half of the V light comes from the companions. The previously determined spectral type of the CAL 87 secondary may need to be reevaluated due to this significant contamination, with consequences on inferences of the mass of the components. We find no companions to NP Ser (= X1813-14, = GX 17+2). However, for this object we point out a small but possibly significant astrometric discrepancy between the position of the optical object and that of the radio source which is the basis for the identification. This discrepancy needs to be clarified.

Deutsch, Eric W.↗
NASA NTRS1976

Optical identification of A0620-00

The optical object corresponding to the transient X-ray source A0620-00 is identified. The position (1950) of this object is given to a precision of 2 sec as: right ascension 6 hr 20 min 11.2 sec, declination -0 deg 19 min 10 sec. It is noted that the object has undergone a substantial change in brightness since the X-ray source was first detected and that three low-dispersion spectra of it show no emission or absorption features. Similarities between the present object and Sco X-1 are discussed.

Boley, F.↗
NASA NTRS1992

Cryogenic shutter

A magnetically operated shutter mechanism is provided that will function in cryogenic or cryogenic zero gravity environments to selectively block radiation such as light from passing through a window to a target object such as a mirror or detector located inside a cryogenic container such as a dewar. The mechanism includes a shutter paddle blade that is moved by an electromagnetically actuated torquing device between an open position where the target object is exposed to ambient radiation or light and a closed position where the shutter paddle blade shields the ambient radiation or light from the target object. The purpose of the shuttering device is to prevent the mirror or other target object from being directly exposed to radiation passing through the window located on the side wall of the dewar, thereby decreasing or eliminating any temperature gradient that would occur within the target object due to exposure to the radiation. A special nylon bearing system is utilized to prevent the device from binding during operation and the paddle blade is also thermally connected to a reservoir containing cryogen to further reduce the internal temperature.

Barney, Richard D.↗