Search NASA⌕ Search

SEARCH · Search NASA

Results for “optical operations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

The Wide-Field Spatio-Spectral Interferometer: System Overview, Data Synthesis and Analysis

The Wide-field Imaging Interferometry Testbed (WIIT) is a double Fourier (DF) interferometer operating at optical wavelengths, and provides data that are highly representative of those from a space-based far-infrared interferometer like SPIRIT. We have used the testbed to observe both geometrically simple and astronomically representative test scenes. Here we present an overview of the astronomical importance of high angular resolution at the far infrared, followed by the description of the optical set-up of WIIT, including the source simulator CHIP (Calibrated Hyperspectral Image Projector). We describe our synthesis algorithms used in the reconstruction of the input test scenes via a simulation of the most recent measurements. The updated algorithms, which include instruments artifacts that allow the synthesis of DF experimental data, are presented and the most recent results analyzed.

Juanola-Parramon, Roser↗
NASA NTRS2016

Low-CNR Inverse Synethetic LADAR Imaging Demonstration with Atmospheric Turbulence

An Inverse Synthetic Aperture LADAR (ISAL) system is capable of providing high resolution surface mapping of near Earth objects which is an ability that has gained significant interest for both exploration and hazard assessment. The use of an ISAL system over these long distances often presents the need to operate the optical system in photon-starved conditions. This leads to a necessity to understand the implications of photon and detector noise in the system. Here a Carrier-to-Noise Ratio is derived which is similar to other optical imaging CNR definitions. The CNR value is compared to the quality of experimentally captured images recovered using the Phase Gradient Autofocus technique both with and without the presence of atmospheric turbulence. A minimum return signal CNR for the PGA to work is observed.

ISAL↗
NASA NTRS1999

Searching for Planets with the Space Interferometry Mission

The Space Interferometry Mission (SIM) is designed as a space-based optical interferometer operating in the visible waveband. This mission will open up many areas of astrophysics, via astrometry with unprecedented accuracy during its 5-year mission.

astrometry↗
NASA NTRS2020

Satellite-To-Satellite Imaging in Support of LEO Optical Navigation, Using the ASTERIA Cubesat

The Arcsecond Space Telescope Enabling Research in Astrophysics (ASTERIA) was a 6-unit CubeSat technology demonstration mission that was built at NASA’s Jet Propulsion Laboratory (JPL) and deployed from the International Space Station (ISS) on November 20th, 2017. After successfully completing its 90-day primary mission that demonstrated arcsecond-level line-of-sight pointing and focal plane thermal stability for exoplanet detection, it entered an extended mission performing onboard software demonstrations alongside science until end of mission in December 2019. At the end of its lifetime it was being used as a demonstration platform for several experiments, including low earth orbit (LEO) optical navigation operations. With its visible light astrometric camera and stable attitude control system, the ASTERIA spacecraft showed itself to be a capable platform for the imaging of geosynchronous satellites from LEO. This paper will describe the imagery attained in flight and also the image processing algorithms that were developed to render that imagery into navigation quality data. These algorithms dealt with hot pixel filtering, noise modeling, attitude registration, star signal rejection and satellite signal identification. Brightness prediction algorithms used for target selection will also be discussed.

Fesq, Lorraine↗
NASA NTRSDate not supplied

NASA Small Spacecraft Technology (SST) Program - Recent and Upcoming Technology Demonstrations and Development Efforts

The Small Spacecraft Technology (SST) program within NASA’s Space Technology Mission Directorate, expands the ability to execute unique missions through rapid development and demonstration of capabilities for small spacecraft applicable to exploration, science and the commercial space sector. Through targeted development and frequent in space testing, the program: • Enables execution of missions at much lower cost than previously possible • Substantially reduces the time required for development of spacecraft • Enables new mission architectures through the use of small spacecraft • Expands the reach of small spacecraft to new destinations and challenging new environments • Enables the augmentation of existing assets and future missions with supporting small spacecraft. The program achieves its objectives through: • Identification and investment in the development of new subsystem technologies to enhance or expand the capabilities of small spacecraft • Sponsorship of flight demonstrations of new technologies, capabilities and applications for small spacecraft • Promotion of the use of small spacecraft as platforms for testing and demonstrating technologies and capabilities that might have more general applications in larger-scale spacecraft and systems Technologies funded by the program that are key to advancing the utility and capability of small spacecraft were demonstrated in 2022 and 2023. Notable on-orbit demonstrations include the following. • The Cislunar Autonomous Positioning System Technology Operations and Navigation Experiment’s (CAPSTONE) navigation technology that was demonstrated for the first time in 2023 could provide autonomous onboard navigation information for future lunar missions, minimizing or eliminating human-in-the-loop mission operations. • The optical communications technology also demonstrated in 2023 by the TeraByte InfraRed Delivery (TBIRD) payload that launched on Pathfinder Technology Demonstrator-3, achieved 200 gigabit per second (Gbps) throughput on a space-to-ground optical link between a satellite in orbit and Earth, the highest data rate ever achieved by optical communications technology. • The precision laser pointing performance of NASA’s CubeSat Infrared CrossLink A (CLICK) spacecraft’s fine steering mirror control system was successfully demonstrated. This element of the laser communications system will be used to demonstrate two-way crosslink communication in low-Earth orbit by CLICK B/C anticipated to launch in late 2024. Investments in subsystem technology development through funding to university, industry, and other government partners in a number of areas will be discussed. Among others, topic areas include propulsion, autonomous swarm technology, edge computing, and thermal control. Additionally, the status of the CubeSat-alternative platform, DiskSat, strategies for accelerating the demonstration of technology payloads via the Realizing Rapid, Reduced-cost high-Risk Research (R5) project, and the status of recently completed and upcoming on-orbit demonstrations will also be presented.

Roger C Hunter↗
NASA NTRSDate not supplied

Design and Performance of a 40W Uplink Laser Transmitter for NASA's O2O Laser Communications Mission

NASA’s Orion Artemis II Optical Communications System (O2O) will provide operational laser communications between the ground and lunar orbit for the Artemis II crewed mission. In this work we describe a 40W ground-based laser transmitter for the O2O system. The uplink transmitter operates in the optical C-band and uses an energy-efficient 32-PPM modulation format. Four spatial diversity channels are time-aligned and combined in the far field. Each channel produces up to 10 W of output power and contains both the communications signal and the 7kHz modulated beacon signal required for acquisition. The transmitter delivers data at 10 Mbits/s and 20 Mbits/s channel rates, corresponding to the 250 MHz and 500 MHz slot rates respectively.

free-space optical communications↗
NASA NTRS1974

Measurement of the earth resources technology satellite /ERTS-1/ multi-spectral scanner OTF from operational imagery

The optical transfer function (OTF) of some typical ERTS-1 multispectral imagery was obtained by comparison of matched sets of aircraft underflight and ERTS photographic and digital images. One-dimensional OTF analysis consisted in obtaining U-2 and ERTS microdensitometer scans followed by density to transmission conversion, microdensitometer aperture correction, exposure calibration, scan correlation scale optimization, OTF calculation, obtaining a form weighted average of the OTFs, transformation of the OTFs back to the spatial domain (giving the line spread function or LSF), and application of a window function to the LSF resulting in a smoothed OTF. Date-to-date comparison of ERTS OTFs showed a drop in quality on April 4, 1973, compared with January 4, 1973.

Schowengerdt, R. A.↗
NASA NTRS1991

Optically addressed asymmetric Fabry-Perot modulator

A low power, high contrast optically addressed modulator, operating with normal incidence, has been fabricated. Optically controlled reflection modulation is achieved through optically induced absorption modulation in a periodically delta-doped InGaAs/GaAs multiple quantum well structure inserted in an integrated asymmetric Fabry-Perot resonator. A contrast ratio over 60:1 was measured using a spectrally matched low power InGaAs/GaAs quantum well laser to generate the write (control) signal. The insertion loss for the normally off modulator is 4.6 dB at the highest write signal power (30 mW) used. The device lends itself to the fabrication of arrays for optically addressed spatial light modulation.

Larsson, A.↗
NASA NTRSDate not supplied

Ground Segment Operations Concept for the Orion Artemis-2 Optical Communications System

The ACCESS Project (formerly Space Network) will implement an optical communications ground segment to support the Orion Artemis II Optical Communications (O2O) demonstration as part of the next manned human spaceflight mission to the moon, Artemis II. O2O implements laser communication (lasercomm) technology for operational use on the Orion series of spacecraft, as a development test objective (DTO), in order to demonstrate the feasibility and operational utility of lasercomm for human spaceflight missions. O2O consists of three segments: Space Segment, Ground Segment, and Operations Segment. The Space Segment consists of the Space Terminal Element and the Orion spacecraft. The Space Terminal Element effort is managed by the GSFC Laser-Enhanced Mission Communications Navigation and Operational Services (LEMNOS) project in collaboration with MIT Lincoln Laboratory. The Ground Segment consists of an optical ground terminal (GT) at the White Sands Complex (WSC), which is being developed in collaboration with MIT Lincoln Laboratory, the Ground Segment Operations and Analysis (GSOA) element and Ground Data Element (GDE), and a second optical GT in the Optical Communications Telescope Laboratory (OCTL) at the JPL Table Mountain Facility. The Operations Segment consists of the Artemis II Mission Control Center (MCC), the Lasercomm Space Terminal Console (LSTC), and the Lasercomm Link Planning & Analysis Center (LPAC), all located at the Johnson Space Center (JSC). O2O utilizes pulse-position modulation (PPM) direct-to-earth services resulting in an 80 Mbps downlink data rate from lunar orbit. The O2O concept of operations is to provide optical services for a minimum of 1 hour per day for each day of the Artemis II mission. O2O will utilize a 10-20 Mbps uplink data rate and 40-260 Mbps downlink data rate, depending on the Artemis II mission phase. The ACCESS project will also provide a centralized mission data interface for user data distribution and storage to the MCC and perform planning and scheduling of services in coordination with the Operations Segment for the O2O Ground Segment. The O2O Ground Segment will support the following O2O mission phases: Pre-Mission Planning; Daily Operations Planning; Event Execution; and Post-Pass Reporting. O2O will be used to exchange data files between Orion and the MCC and to distribute real-time video through the optical downlink service to the MCC; which would not be possible without the high-bandwidth link that O2O will provide to Orion. In this paper, I will discuss the O2O Ground Segment development approach and how it will support these critical O2O functions: plan and schedule the contact; acquire and track the optical link; flow information bidirectionally; distribute information; and control and accommodate the system.

optical communications↗
NASA NTRS2012

Feasibility Study of Two Candidate Reaction Wheel/thruster Hybrid Control Architecture Designs for the Cassini Spacecraft

As the first spacecraft to achieve orbit at Saturn in 2004, Cassini has collected science data throughout its four-year prime mission (2004-08), and has since been approved for a first and second extended mission through 2017. Cassini carries a set of three "fixed" reaction wheels and a backup reaction wheel (reaction wheel #4) is mounted on top of an articulable platform. If necessary, this platform could be articulated to orient the backup reaction wheel with the degraded wheel. The reaction wheels are used primarily for attitude control when precise and stable pointing of a science instrument such as the narrow angle camera is required. In 2001-02, reaction wheel #3 exhibited signs of bearing cage instability. As a result, reaction wheel #4 was articulated to align with reaction wheel #3. Beginning in July 2003, Cassini was controlled using wheel #1, #2, and #4. From their first use in the spring of 2000 until today, reaction wheels #1 and #2 have accumulated more than3.5 billions revolutions each. As such, in spite of very carefully management of the wheel spin rates by the mission operation team, there are some observed increases in the drag torque of the wheels' bearings. Hence, the mission operations team must prepare for the contingency scenario in which the reaction wheel #1 (in addition to wheel #3) had degraded. In this hypothetical fault scenario, the two remaining reaction wheels (#2 and #4) will not be able to provide precise and stable three-axis control of the spacecraft. In this study, we evaluate the feasibility of controlling Cassini using the two remaining reaction wheels and four thrusters to meet the science pointing requirements for two key science operational modes: the Optical Remote Sensing and Downlink, Fields, Particles, & Waves operation modes. The performance (e.g., pointing control error, pointing stability, hydrazine consumption rate, etc.) of the hybrid controllers in both operations scenarios will be compared with those achieved using an all-thruster controller design. Strength and weaknesses of the hybrid control architecture are assessed quantitatively.

Cassini↗
NASA NTRS2016

Cryogenic Fiber Optic Assemblies for Spaceflight Environments: Design, Manufacturing, Testing, and Integration

Fiber optic assemblies have been used on spaceflight missions for many years as an enabling technology for routing, transmitting, and detecting optical signals. Due to the overwhelming success of NASA in implementing fiber optic assemblies on spaceflight science-based instruments, system scientists increasingly request fibers that perform in extreme environments while still maintaining very high optical transmission, stability, and reliability. Many new applications require fiber optic assemblies that will operate down to cryogenic temperatures as low as 20 Kelvin. In order for the fiber assemblies to operate with little loss in optical throughput at these extreme temperatures requires a system level approach all the way from how the fiber assembly is manufactured to how it is held, routed, and integrated. The NASA Goddard Code 562 Photonics Group has been designing, manufacturing, testing, and integrating fiber optics for spaceflight and other high reliability applications for nearly 20 years. Design techniques and lessons learned over the years are consistently applied to developing new fiber optic assemblies that meet these demanding environments. System level trades, fiber assembly design methods, manufacturing, testing, and integration will be discussed. Specific recent examples of ground support equipment for the James Webb Space Telescope (JWST); the Ice, Cloud and Land Elevation Satellite-2 (ICESat-2); and others will be included.

Fiber Optic↗
NASA NTRS2019

Spectroscopic Behavior of Composite, Black Thermal Paint, Solar Cell, and Multi-layered Insulation Materials in a GEO Simulated Environment

Materials currently populating Earth orbital regimes can be distinguished by comparing remote observational data to that of optical material measurements obtained in the laboratory. Experimentation for this research primarily involved the acquisition of spectroscopic measurements on materials of interest to the telescopic observational community for enhanced space situational awareness. Common spacecraft materials worthy of preeminent analysis for this investigation include a carbon-carbon (c-c) matrix composite, various black thermal paints, a GPS solar cell and three different cover glass components. These materials were subjected to a simulated geosynchronous Earth orbit (GEO) space environment with the intent of observing material optical property behavior over quantitative exposure time. The aforementioned materials have been measured in their pristine and GEO simulated exposed conditions. A reflectance spectrometer and a bi-directional reflectance distribution function (BRDF) optical system have been operated to perform material characterization, optical property analysis, and to further compare such data to telescopic observational data acquired on equal materials.

Reyes, Jacqueline A.↗
NASA NTRS1988

Two dimensional convolute integers for machine vision and image recognition

Machine vision and image recognition require sophisticated image processing prior to the application of Artificial Intelligence. Two Dimensional Convolute Integer Technology is an innovative mathematical approach for addressing machine vision and image recognition. This new technology generates a family of digital operators for addressing optical images and related two dimensional data sets. The operators are regression generated, integer valued, zero phase shifting, convoluting, frequency sensitive, two dimensional low pass, high pass and band pass filters that are mathematically equivalent to surface fitted partial derivatives. These operators are applied non-recursively either as classical convolutions (replacement point values), interstitial point generators (bandwidth broadening or resolution enhancement), or as missing value calculators (compensation for dead array element values). These operators show frequency sensitive feature selection scale invariant properties. Such tasks as boundary/edge enhancement and noise or small size pixel disturbance removal can readily be accomplished. For feature selection tight band pass operators are essential. Results from test cases are given.

Edwards, Thomas R.↗
NASA NTRS1990

NASA Langley and AF RADC high-speed fiber optic transceiver program

NASA-Langley and the USAF Rome Air Development Center have been pursuing the development of military- and space-qualified fiber optic transceivers for a variety of ground-based, space-based, and general avionic applications. An initial development pursued a design called the multipurpose fiber optic transceiver (MFOX) and provided a family of fiber optic transceivers which operated up to 1 Gb/s. Currently, a second generation of high-speed fiber optic transceivers (HSFOX) is being developed. This design will utilize an all-integrated-circuits approach in order to develop a lighter-weight, smaller-size, and more efficient transceiver. The high-speed fiber optic transceiver will be military-and-space-operating in the 0.05-5 Gb/s data rate range. The initial results of tests, performance, and availability of commercial high-speed all-integrated-circuit chipsets for fiber-optic transceivers are discussed, as well as the performance of transceivers fabricated from these chipsets.

Hendricks, Herbert D.↗
NASA NTRS1987

Implementation of a digital optical matrix-vector multiplier using a holographic look-up table and residue arithmetic

The design and implementation of a digital (numerical) optical matrix-vector multiplier are presented. The objective is to demonstrate the operation of an optical processor designed to minimize computation time in performing a practical computing application. This is done by using the large array of processing elements in a Hughes liquid crystal light valve, and relying on the residue arithmetic representation, a holographic optical memory, and position coded optical look-up tables. In the design, all operations are performed in effectively one light valve response time regardless of matrix size. The features of the design allowing fast computation include the residue arithmetic representation, the mapping approach to computation, and the holographic memory. In addition, other features of the work include a practical light valve configuration for efficient polarization control, a model for recording multiple exposures in silver halides with equal reconstruction efficiency, and using light from an optical fiber for a reference beam source in constructing the hologram. The design can be extended to implement larger matrix arrays without increasing computation time.

Habiby, Sarry F.↗
NASA NTRS1981

The effects of pointing errors on the performance of optical communications systems

Optical communications systems operating over interplanetary distances require the use of extremely narrow optical beams for maximum power concentration near the receiver. Consequently, pointing errors must be kept to a small fraction of a beamwidth to avoid severe deterioration in receiver performance, due to the decrease in received power associated with pointing errors. Mathematical moels required for studying the effects of random pointing errors were developed and applied to the problem of quantifying the effects of pointing errors on the performance of coherent and incoherent optical receivers.

Vilnrotter, V. A.↗