SEARCH · Search NASA

Results for “output feedback”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

NASA NTRS1986

Eigensystem synthesis for active flutter suppression on an oblique-wing aircraft

The application of the eigensystem synthesis technique to place the closed-loop eigenvalues and shape the closed-loop eigenvectors has not been practical for active flutter suppression, primarily because of the availability of only one control surface (aileron) for flutter suppression. The oblique-wing aircraft, because of its configuration, provides two independent surfaces (left and right ailerons), making the application of eigensystem synthesis practical. This paper presents the application of eigensystem synthesis using output feedback for the design of an active flutter suppression system for an oblique-wing aircraft. The results obtained are compared with those obtained by linear quadratic Gaussian techniques.

Alag, G. S.↗

NASA NTRS1985

Flight test trajectory controller synthesis with constrained eigenstructure assignment

The design of a maneuver autopilot for flight test trajectory control using constrained eigenvalue/eigenvector assignment is examined. The aircraft considered was a high-performance fighter with a command augmentation system engaged in all three axes. Attention is given to difficulties encountered in the generation of the desired eigenvalues and eigenvectors. It is found that this approach demands several iterations to converge to a satisfactory result, and does not appear to easily yield suitable insight for the output feedback design of high-order multivariable systems which will be used at other operating points. It is concluded that this technique could be made more attractive by generating gradients of the eigensystem between flight conditions, and including this information in the single-point design technique.

Menon, P. K. A.↗

NASA NTRS1986

Fixed order dynamic compensation for multivariable linear systems

This paper considers the design of fixed order dynamic compensators for multivariable time invariant linear systems, minimizing a linear quadratic performance cost functional. Attention is given to robustness issues in terms of multivariable frequency domain specifications. An output feedback formulation is adopted by suitably augmenting the system description to include the compensator states. Either a controller or observer canonical form is imposed on the compensator description to reduce the number of free parameters to its minimal number. The internal structure of the compensator is prespecified by assigning a set of ascending feedback invariant indices, thus forming a Brunovsky structure for the nominal compensator.

Kramer, F. S.↗

NASA NTRS1986

Eigensystem synthesis for active flutter suppression on an oblique-wing aircraft

Alag, G. S.↗

NASA NTRS1986

Robust multivariable controller design for flexible spacecraft

Large, flexible spacecraft are typically characterized by a large number of significant elastic modes with very small inherent damping, low, closely spaced natural frequencies, and the lack of accurate knowledge of the structural parameters. Summarized here is some recent research on the design of robust controllers for such spacecraft, which will maintain stability, and possible performance, despite these problems. Two types of controllers are considered, the first being the linear-quadratic-Gaussian-(LQG)-type. The second type utilizes output feedback using collocated sensors and actuators. The problem of designing robust LQG-type controllers using the frequency domain loop transfer recovery (LTR) method is considered, and the method is applied to a large antenna model. Analytical results regarding the regions of stability for LQG-type controllers in the presence of actuator nonlinearities are also presented. The results obtained for the large antenna indicate that the LQG/LTR method is a promising approach for control system design for flexible spacecraft. For the second type of controllers (collocated controllers), it is proved that the stability is maintained in the presence of certain commonly encountered nonlinearities and first-order actuator dynamics. These results indicate that collocated controllers are good candidates for robust control in situations where model errors are large.

Joshi, Suresh M.↗

NASA NTRS1987

Passive stabilization for large space systems

The optimal tuning of multiple tuned-mass dampers for the transient vibration damping of large space structures is investigated. A multidisciplinary approach is used. Structural dynamic techniques are applied to gain physical insight into absorber/structure interaction and to optimize specific cases. Modern control theory and parameter optimization techniques are applied to the general optimization problem. A design procedure for multi-absorber multi-DOF vibration damping problems is presented. Classical dynamic models are extended to investigate the effects of absorber placement, existing structural damping, and absorber cross-coupling on the optimal design synthesis. The control design process for the general optimization problem is formulated as a linear output feedback control problem via the development of a feedback control canonical form. The techniques are applied to sample micro-g and pointing problems on the NASA dual keel space station.

Sesak, J. R.↗

NASA NTRS1987

Controller design via structural reduced modeling by FETM

The Finite Element-Transfer Matrix (FETM) method has been developed to reduce the computations involved in analysis of structures. This widely accepted method, however, has certain limitations, and does not address the issues of control design. To overcome these, a modification of the FETM method has been developed. The new method easily produces reduced models tailored toward subsequent control design. Other features of this method are its ability to: (1) extract open loop frequencies and mode shapes with less computations, (2) overcome limitations of the original FETM method, and (3) simplify the design procedures for output feedback, constrained compensation, and decentralized control. This report presents the development of the new method, generation of reduced models by this method, their properties, and the role of these reduced models in control design. Examples are included to illustrate the methodology.

Yousuff, Ajmal↗

NASA NTRS1987

Modal decoupling insensitivity

This note deals with the design of an output feedback control system such that selected closed-loop eigenvalues are insensitive, while the corresponding eigenvectors preserve a prescribed decoupling under parameter variation. This results in restricting specified elements of an eigenvector to be insensitive, rather than the entire eigenvector. This requirement is henceforth referred to as modal decoupling insensitivity. Sufficient conditions for modal decoupling insensitivity are derived. These conditions offer the advantage of increased flexibility in eigenvector assignment, but the constraint on the feedback matrix is more restrictive. A numerical example is presented to illustrate the design procedure.

Raman, K. V.↗

NASA NTRS1987

Robust eigensystem assignment for flexible structures

An improved method is developed for eigenvalues and eigenvectors placement of a closed-loop control system using either state or output feedback. The method basically consists of three steps. First, the singular value of QR decomposition is used to generate an orthonormal basis that spans admissible eigenvector space corresponding to each assigned eigenvalue. Secondly, given a unitary matrix, the eigenvector set which best approximates the given matrix in the least-square sense and still satisfy eigenvalue cosntraints is determined. Thirdly, a unitary matrix is sought to minimize the error between the unitary matrix and the assignable eigenvector matrix. For use as the desired eigenvector set, two matrices, namely, the open-loop eigenvector matrix and its closest unitary matrix are proposed. The latter matrix generally encourages both minimum conditioning and control gains. In addition, the algorithm is formulated in real arithmetic for efficient implementation. To illustrate the basic concepts, numerical examples are included.

Juang, Jer-Nan↗

NASA NTRS1987

Investigation of control law for active flutter suppression

Discussed is the technology of active flutter suppression research by the use of the wind-tunnel model of a delta wing with low aspect ratio. The research includes the establishment of a mathematical model for the servo-aeroelastic system, and the synthesis and analysis of sub-optimal output feedback control laws for active flutter suppression.

Wang, Weipeng↗

NASA NTRS1987

Control design challenges of large space systems and spacecraft control laboratory experiment (SCOLE)

The quick suppression of the structural vibrations excited by bang-bang (BB) type time-optional slew maneuvers via modal-dashpot design of velocity output feedback control was investigated. Simulation studies were conducted, and modal dashpots were designed for the SCOLE flexible body dynamics. A two-stage approach was proposed for rapid slewing and precision pointing/retargeting of large, flexible space systems: (1) slew the whole system like a rigid body in a minimum time under specified limits on the control moments and forces, and (2) damp out the excited structural vibrations afterwards. This approach was found promising. High-power modal/dashpots can suppress very large vibrations, and can add a desirable amount of active damping to modeled modes. Unmodeled modes can also receive some concomitant active damping, as a benefit of spillover. Results also show that not all BB type rapid pointing maneuvers will excite large structural vibrations. When properly selected small forces (e.g., vernier thrusters) are used to complete the specified slew maneuver in the shortest time, even BB-type maneuvers will excite only small vibrations (e.g., 0.3 ft peak deflection for a 130 ft beam).

Lin, Jiguan Gene↗

NASA NTRS1987

Synthesis of fine-pointing control systems for large, flexible spacecraft

This paper considers the problem of designing attitude control systems for large space structures (LSS). The difficulties in control systems design, which arise because of special dynamic characteristics of LSS, are described, and methods for overcoming them using two types of controllers are presented. The first type of controller considered is a model-based compensator (MBC), and the second is the 'dissipative' controller which employs output feedback. Based on the numerical and analytical results obtained, the MBC can offer good performance under normal conditions, while the dissipative controller offers more robustness but perhaps reduced performance in situations involving large uncertainties.

Joshi, Suresh M.↗

NASA NTRS1988

An approximate loop transfer recovery method for designing fixed-order compensators

A method for designing fixed-order dynamic compensators for multivariable time invariant linear systems is presented which is based on the minimization of a linear quadratic performance index. The present formulation is performed in an output feedback setting which uses an observer cononical form to represent the compensator dynamics. Techniques for penalizing the plant and compensator states and for selecting the distribution on initial conditions such that the loop transfer matrix approximates that of a full-state feedback design have been developed. The effectiveness of the method is demonstrated using the examples of the pointing of a flexible structure and a helicopter flight control problem.

Calise, Anthony J.↗

NASA NTRS1987

Flexible manipulator control experiments and analysis

Modeling and control design for flexible manipulators, both from an experimental and analytical viewpoint, are described. From the application perspective, an ongoing effort within the laboratory environment at the Ohio State University, where experimentation on a single link flexible arm is underway is described. Several unique features of this study are described here. First, the manipulator arm is slewed by a direct drive dc motor and has a rigid counterbalance appendage. Current experimentation is from two viewpoints: (1) rigid body slewing and vibration control via actuation with the hub motor, and (2) vibration suppression through the use of structure-mounted proof-mass actuation at the tip. Such an application to manipulator control is of interest particularly in design of space-based telerobotic control systems, but has received little attention to date. From an analytical viewpoint, parameter estimation techniques within the closed-loop for self-tuning adaptive control approaches are discussed. Also introduced is a control approach based on output feedback and frequency weighting to counteract effects of spillover in reduced-order model design. A model of the flexible manipulator based on experimental measurements is evaluated for such estimation and control approaches.

Yurkovich, S.↗

NASA NTRS1988

Robust multivariable control of large space structures

The problem of designing attitude-control systems for large flexible space structures is considered. The difficulties which arise because of special dynamic characteristics are described, and methods for overcoming them using two type of controllers are presented. The first type of controller considered is a model-based compensator (MBC) and the second is the 'dissipative' controller which employs output feedback. Based on the analytical and numerical results obtained, the MBC can offer good performance under normal conditions, while the dissipative controller offers more robustness but perhaps reduced performance in situations involving larger uncertainties.

Joshi, Suresh M.↗

NASA NTRS1989

Rapid rotational/translational maneuvering experiments of a flexible steel beam

Future space manipulators may need translational base motion to expand the access region of a manipulator. An experiment was conducted to demonstrate slewing of flexible structures with coupled rotational and translational axes while simultaneously suppressing vibrational motion during the maneuver. In the experiment, a flexible steel beam carried by a translational cart was maneuvered by an active controller to perform position-control tasks. Experimental results are presented to show how the flexibility of the steel beam influences the multi-input multi-output feedback controller.

Juang, Jer-Nan↗

NASA NTRS1989

Additional software developments wanted for modeling and control of flexible space systems

Existing modeling and control software packages are either inadequate or inefficient for applications to flexible space structures. Some additional software developments are wanted for effective design and evaluation of the control systems. The following are discussed: (1) linear-quadratic optimal regulators as usual can be designed using various modern control design software packages, (2) modal dashpots are very effective output-feedback vibration controllers for flexible structures, not only effective for augmenting a small amount of active damping to a large number of vibration modes (like the so-called low-authority structural controllers), but also effective for quick suppression of large vibrations (like high-authority structural controllers), and (3) the actual performance of any control design needs to be evaluated against a faithful model of the flexible structure to be controlled. The potential of destabilization or serious performance degradation needs to be detected by numerical simulation of the structure with the control loops being closed.

Lin, Jiguan Gene↗

NASA NTRS1990

Robust eigensystem assignment for second-order estimators

An approach for the robust eigensystem assignment of flexible structures using full state or output feedback is developed. Using the second-order dynamic equations, the approach can assign the eigenvalues of the system via velocity and displacement feedbacks, or acceleration and velocity feedbacks. The eigenvalues and eigenvectors of the system are assigned, via the second-order eigenvalue problem for the structural system, in two steps. First, an orthonormal basis spanning the attainable closed-loop eigenvector space corresponding to each desired closed-loop eigenvalue is generated using the Singular Value or QR decompositions. Second, a sequential procedure is used to choose a set of closed-loop eigenvectors that are as close as possible to the column space of a well-conditioned target matrix. Among the possible choices of the target matrix, the closest unitary matrix to the open-loop eigenvector matrix appears to be a suitable choice. A numerical example is given to illustrate the proposed algorithm.

Juang, Jer-Nan↗