Search NASA⌕ Search

SEARCH · Search NASA

Results for “partial derivative”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Topics in spectral methods

After detailing the construction of spectral approximations to time-dependent mixed initial boundary value problems, a study is conducted of differential equations of the form 'partial derivative of u/partial derivative of t = Lu + f', where for each t, u(t) belongs to a Hilbert space such that u satisfies homogeneous boundary conditions. For the sake of simplicity, it is assumed that L is an unbounded, time-independent linear operator. Attention is given to Fourier methods of both Galerkin and pseudospectral method types, the Galerkin method, the pseudospectral Chebyshev and Legendre methods, the error equation, hyperbolic partial differentiation equations, and time discretization and iterative methods.

Gottlieb, D.↗

A simple, analytic 3-dimensional downburst model based on boundary layer stagnation flow

A simple downburst model is developed for use in batch and real-time piloted simulation studies of guidance strategies for terminal area transport aircraft operations in wind shear conditions. The model represents an axisymmetric stagnation point flow, based on velocity profiles from the Terminal Area Simulation System (TASS) model developed by Proctor and satisfies the mass continuity equation in cylindrical coordinates. Altitude dependence, including boundary layer effects near the ground, closely matches real-world measurements, as do the increase, peak, and decay of outflow and downflow with increasing distance from the downburst center. Equations for horizontal and vertical winds were derived, and found to be infinitely differentiable, with no singular points existent in the flow field. In addition, a simple relationship exists among the ratio of maximum horizontal to vertical velocities, the downdraft radius, depth of outflow, and altitude of maximum outflow. In use, a microburst can be modeled by specifying four characteristic parameters, velocity components in the x, y and z directions, and the corresponding nine partial derivatives are obtained easily from the velocity equations.

Oseguera, Rosa M.↗

Minimum Hamiltonian Ascent Trajectory Evaluation (MASTRE) program (update to automatic flight trajectory design, performance prediction, and vehicle sizing for support of Shuttle and Shuttle derived vehicles) engineering manual

The Minimum Hamiltonian Ascent Trajectory Evaluation (MASTRE) program and its predecessors, the ROBOT and the RAGMOP programs, have had a long history of supporting MSFC in the simulation of space boosters for the purpose of performance evaluation. The ROBOT program was used in the simulation of the Saturn 1B and Saturn 5 vehicles in the 1960's and provided the first utilization of the minimum Hamiltonian (or min-H) methodology and the steepest ascent technique to solve the optimum trajectory problem. The advent of the Space Shuttle in the 1970's and its complex airplane design required a redesign of the trajectory simulation code since aerodynamic flight and controllability were required for proper simulation. The RAGMOP program was the first attempt to incorporate the complex equations of the Space Shuttle into an optimization tool by using an optimization method based on steepest ascent techniques (but without the min-H methodology). Development of the complex partial derivatives associated with the Space Shuttle configuration and using techniques from the RAGMOP program, the ROBOT program was redesigned to incorporate these additional complexities. This redesign created the MASTRE program, which was referred to as the Minimum Hamiltonian Ascent Shuttle TRajectory Evaluation program at that time. Unique to this program were first-stage (or booster) nonlinear aerodynamics, upper-stage linear aerodynamics, engine control via moment balance, liquid and solid thrust forces, variable liquid throttling to maintain constant acceleration limits, and a total upgrade of the equations used in the forward and backward integration segments of the program. This modification of the MASTRE code has been used to simulate the new space vehicles associated with the National Launch Systems (NLS). Although not as complicated as the Space Shuttle, the simulation and analysis of the NLS vehicles required additional modifications to the MASTRE program in the areas of providing additional flexibility in the use of the program, allowing additional optimization options, and providing special options for the NLS configuration.

Lyons, J. T.↗

Shock revival in core-collapse supernovae: A phase-diagram analysis

We examine the conditions for the revival of the stalled accretion shock in core-collapse supernovae, in the context of the neutrino heating mechanism. We combine one-dimensional simulations of the shock revival process with a derivation of a quasi-stationary approximation, which is both accurate and efficient in predicting the flow. In particular, this approach is used to explore how the evolution of the accretion shock depends on the shock radius, R{sub S}, and velocity, V{sub S} (in addition to other global properties of the system). We do so through a phase-space analysis of the shock acceleration, a{sub S}, in the R{sub S}--V{sub S} plane, shown to provide quantitative insights into the initiation and nature of runaway expansion. In the particular case of an initially stationary (V{sub S}=0, a{sub S}=0) profile, the prospects for an explosion can be assessed by the initial signs of the partial derivatives of the shock acceleration, in analogy to a linear damped/anti-damped oscillator. If ∂a{sub S}/∂R{sub S}<0 and ∂a{sub S}/∂V{sub S}>0, runaway will likely occur after several oscillations, while if ∂a{sub S}/∂R{sub S}>0, runaway expansion will commence in a non-oscillatory fashion. These two modes of runaway correspond to low and high mass accretion rates, respectively. We also use the quasi-stationary approximation to assess the advection-to-heating timescale ratio in the gain region, often used as an explosion proxy. Indeed, this ratio does tend to ∼1 in conjunction with runaway conditions, but neither this unit value nor the specific choice of the gain region as a point of reference appear to be unique in this regard.

79 ASTRONOMY AND ASTROPHYSICS↗

On the Nonautonomous Nonlinear Schroedinger Equations and Soliton Management

We present some novel results on the nonlinear Schroedinger equations with time- and space-dependent dispersion, nonlinearity, dissipation/gain and external potentials which read i(partial derivu(x,t)/partial derivt)+f(x,t)(partial deriv{sup 2}u(x,t)/partial derivx{sup 2})+g(x,t)|u(x,t)|{sup 2}u(x,t)+V(x,t)u(x,t)+igamma (x,t)u(x,t) = 0. Based on these results, we show some explicit ways to control the soliton dynamics in some physically interesting nonlinear systems like Bose-Einstein condensates and optical soliton transmission.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optimal reusable-tug and expendable-kickstage trajectories for high-energy planetary missions including correction for nodal precession

Equations are derived by using branched trajectory optimization techniques and the maximum principle to maximize the payload capability of a reusable tug/expendable kickstage vehicle configuration for planetary missions. The two stages and the payload are launched into a low earth orbit by a single space shuttle. The analysis includes correction for precession of the orbit. This correction is done by the tug. The tug propels the payload and the kickstage to an energy beyond earth escape and returns within a specified time to the precessed orbit. After separating from the tug, the kickstage accelerates the payload to the required injection conditions. Planetary injection conditions are specified by the mission energy and a fixed declination and right ascension of the outgoing asymptote. The multipoint boundary value problem resulting from the analysis is solved by a Newton-Raphson iteration technique. Partial derivatives of the boundary conditions are obtained by perturbing the initial conditions one at a time, integrating the trajectory and adjoint equations, and observing the changes in boundary conditions. Maximum payload capability is derived for two typical mission energies. In addition, the variations of several mission and stage parameters are also examined.

Borsody, J.↗

Serpentine: Finite Difference Methods for Wave Propagation in Second Order Formulation

Wave propagation phenomena are important in many DOE applications such as nuclear explosion monitoring, geophysical exploration, estimating ground motion hazards and damage due to earthquakes, non-destructive testing, underground facilities detection, and acoustic noise propagation. There are also future applications that would benefit from simulating wave propagation, such as geothermal energy applications and monitoring sites for carbon storage via seismic reflection techniques. In acoustics and seismology, it is of great interest to increase the frequency bandwidth in simulations. In seismic exploration, greater frequency resolution enables shorter wave lengths to be included in the simulations, allowing for better resolution in the seismic imaging. In nuclear explosion monitoring, higher frequency seismic waves are essential for accurate discrimination between explosions and earthquakes. When simulating earthquake induced motion of large structures, such as nuclear power plants or dams, increased frequency resolution is essential for realistic damage predictions. Another example is simulations of micro-seismic activity near geothermal energy plants. Here, hydro-fracturing induces many small earthquakes and the time scale of each event is proportional to the square root of the moment magnitude. As a result, the motion is dominated by higher frequencies for smaller seismic events. The above wave propagation problems are all governed by systems of hyperbolic partial differential equations in second order differential form, i.e., they contain second order partial derivatives of the dependent variables. Our general research theme in this project has been to develop numerical methods that directly discretize the wave equations in second order differential form. The obvious advantage of working with hyperbolic systems in second order differential form, as opposed to rewriting them as first order hyperbolic systems, is that the number of differential equations in the second order system is significantly smaller. Another issue with re-writing a second order system into first order form is that compatibility conditions often must be imposed on the first order form. These (Saint-Venant) conditions ensure that the solution of the first order system also satisfies the original second order system. However, such conditions can be difficult to enforce on the discretized equations, without introducing additional modeling errors. This project has previously developed robust and memory efficient algorithms for wave propagation including effects of curved boundaries, heterogeneous isotropic, and viscoelastic materials. Partially supported by internal funding from Lawrence Livermore National Laboratory, many of these methods have been implemented in the open source software WPP, which is geared towards 3-D seismic wave propagation applications. This code has shown excellent scaling on up to 32,768 processors and has enabled seismic wave calculations with up to 26 Billion grid points. The WPP calculations have resulted in several publications in the field of computational seismology, e.g.. All of our current methods are second order accurate in both space and time. The benefits of higher order accurate schemes for wave propagation have been known for a long time, but have mostly been developed for first order hyperbolic systems. For second order hyperbolic systems, it has not been known how to make finite difference schemes stable with free surface boundary conditions, heterogeneous material properties, and curvilinear coordinates. The importance of higher order accurate methods is not necessarily to make the numerical solution more accurate, but to reduce the computational cost for obtaining a solution within an acceptable error tolerance. This is because the accuracy in the solution can always be improved by reducing the grid size h. However, in practice, the available computational resources might not be large enough to solve the problem with a low order method.

15 GEOTHERMAL ENERGY↗

NLTE and LTE Lick indices for red giants from [Fe/H] 0.0 TO −6.0 at SDSS and IDS spectral resolution

We investigate the dependence of the complete system of 22 Lick indices on overall metallicity scaled from solar abundances, [M/H], from the solar value, 0.0, down to the extremely metal-poor (XMP) value of −6.0, for late-type giant stars (MK luminosity class III, logg=2.0) of MK spectral class late-K to late-F (3750<T{sub eff}<6500 K) of the type that are detected as “fossils” of early galaxy formation in the Galactic halo and in extra-galactic structures. Our investigation is based on synthetic index values, I, derived from atmospheric models and synthetic spectra computed with PHOENIX in Local Thermodynamic Equilibrium (LTE) and Non-LTE (NLTE), where the synthetic spectra have been convolved to the spectral resolution, R, of both IDS and SDSS (and LAMOST) spectroscopy. We identify nine indices, that we designate “Lick-XMP,” that remain both detectable and significantly [M/H]-dependent down to [M/H] values of at least ∼−5.0, and down to [M/H] ∼ −6.0 in five cases, while also remaining well-behaved (single-valued as a function of [M/H] and positive in linear units). For these nine indices, we study the dependence of I on NLTE effects, and on spectral resolution. For our LTE I values for spectra of SDSS resolution, we present the fitted polynomial coefficients, C{sub n}, from multi-variate linear regression for I with terms up to third order in the independent variable pairs (T{sub eff}, [M/H] ) and (V−K, [M/H]), and compare them to the fitted C{sub n} values of Worthey et al. at IDS spectral resolution. For this fitted I data-set we present tables of LTE partial derivatives, ((∂I)/(∂T{sub eff}))|{sub [M/H]}, ((∂I)/(∂[M/H]))|{sub T{sub e{sub f{sub f}}}}, ((∂I)/(∂(V−K)))|{sub [M/H]}, and ((∂I)/(∂[M/H]))|{sub (V−K)}, that can be used to infer the relation between a given difference, ΔI, and a difference ΔT{sub eff} or Δ(V−K), or a difference Δ[M/H], while the other parameters are held fixed. For Fe-dominated Lick indices, the effect of NLTE is to generally weaken the value of I at any given T{sub eff} and [M/H] values. As an example of the impact on stellar parameter estimation, for late-type giants of inferred T{sub eff}≳4200 K, an Fe-dominated I value computed in LTE that is too strong might be compensated for by inferring a T{sub eff} value that is too large.

79 ASTRONOMY AND ASTROPHYSICS↗

Casimir effect of massive vector fields

We study the Casimir effect due to a massive vector field in a system of two parallel plates made of real materials, in an arbitrary magnetodielectric background. The plane waves satisfying the Proca equations are classified into transverse modes and longitudinal modes which have different dispersion relations. Transverse modes are further divided into type I and type II corresponding to TE and TM modes in the massless case. For general magnetodielectric media, we argue that the correct boundary conditions are the continuities of H{sub ||}, {phi}, A, and {partial_derivative}{sub x}A{sub x}, where x is the direction normal to the plates. Although there are type I transverse modes that satisfy all the boundary conditions, it is impossible to find type II transverse modes or longitudinal modes that satisfy all the boundary conditions. To circumvent this problem, type II transverse modes and longitudinal modes have to be considered together. We call the contribution to the Casimir energy from type I transverse modes TE contribution, and the contribution from the superposition of type II transverse modes and longitudinal modes TM contribution. Their massless limits give, respectively, the TE and TM contributions to the Casimir energy of a massless vector field. The limit where the plates become perfectly conducting is discussed in detail. For the special case where the background has a unity refractive index, it is shown that the TM contribution to the Casimir energy can be written as a sum of contributions from two different types of modes, corresponding to type II discrete modes and type III continuum modes discussed by Barton and Dombey [G. Barton and N. Dombey, Ann. Phys. (N.Y.) 162, 231 (1985).]. For general background, this splitting does not work. The limit where both plates become infinitely permeable and the limit where one plate becomes perfectly conducting and one plate becomes infinitely permeable are also investigated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nonlinear model predictive control for mode‐switching operation of reversible solid oxide cell systems

Abstract Solid oxide cells (SOCs) are a promising dual‐mode technology for the production of hydrogen through high‐temperature water electrolysis, and the generation of power through a fuel cell reaction that consumes hydrogen. Switching between these two modes as the price of electricity fluctuates requires reversible SOC operation and accurate tracking of hydrogen and power production set points. Moreover, a well‐functioning control system is important to avoid cell degradation during mode‐switching operation. In this article, we apply nonlinear model predictive control (NMPC) to an SOC module and supporting equipment and compare NMPC performance to classical proportional‐integral (PI) control strategies, while switching between the modes of hydrogen and power production. While both control methods provide similar performance across various metrics during mode switching, NMPC demonstrates a significant advantage in reducing cell thermal gradients and curvatures (mixed spatial‐temporal partial derivatives), thereby helping to mitigate long‐term degradation.

08 HYDROGEN↗

Sensitivity analysis of a layered piezoelectric system using ZFEM

The complex variable finite element method (ZFEM) is a numerical technique which aims to find the partial derivatives of the independent variables with respect to variation in dependent parameters declared in the physics. This is done by combining the complex Taylor series expansion within the weak formulation of the governing equation in a coupled system of linear equations forming a complex valued block matrix given by the Cauchy–Riemann matrix representation. In this work, two-dimensional linear first-order elements have been implemented in ZFEM to predict the design derivatives of the mechanical displacement field and the voltage potential field for a layered piezoelectric system in a steady-state study with Dirichlet boundary condition applied at the top and bottom edges of the geometry. This approach allows the standard FEM solution to quantify the sensitivity of the mechanical displacement and voltage potential fields with respect to small variations in the material properties through the information obtained from the computation of the derivatives. The domain is formed by a layered body with PZT-4 and PZT-5 stacked together. For result verification, the numerical solution obtained with ZFEM was compared to results from a commercial FEM package and the solution from the imaginary part was compared to the exact solution of a well-known benchmark problem. In conclusion, comparison of the results showed good agreement for both the real and imaginary parts of the solution and the largest sensitivities were found in PZT-5 specifically in C 13 , C 33 , and ε 33 .

42 ENGINEERING↗

Uncertainty Quantification Enabled by Automatic Differentiation for Hydrodynamic Simulation of Shock‐to‐Detonation Transition in High Explosives

Quantifying the effects of uncertainty in a reactive burn model on the run-to-detonation time in high explosives (HEs) provides a robust methodology for assessing the probability of an HE failing the IHE qualification standard. Moreover, uncertainty quantification helps evaluate whether the model calibration accurately represents data outside the calibration set. This study uses a specialized hydrodynamic simulation code for modeling detonation to determine the run-to-detonation time of the HE PBX 9502 for various impact velocities. To quickly approximate uncertainties in the model, a surrogate was constructed using a Taylor series expansion centered at the mean of the input parameters. To obtain the sensitivities required for constructing the Taylor series, HYP-percomplex Automatic Differentiation (HYPAD) was implemented. HYPAD is a methodology for infusing existing codes with automatic differentiation capabilities by augmenting variables with one or more imaginary units to compute step-size independent partial derivatives. These derivatives are accurate to machine precision with respect to the implemented numerical algorithm, meaning their accuracy reflects that of the underlying method (e.g., integration or discretization schemes). Using reduced order modeling techniques, the mean and standard deviation of the run-to-detonation time of a shock within PBX 9502 were computed for a number of initial impact velocities. A weighted least squares regression was then performed to obtain a best fit curve and prediction interval for the computed statistics. Historical data points from explosively driven wedge tests were utilized to validate the prediction interval, ensuring its reliability in predicting future outcomes. With this prediction interval and a known safety constraint curve, the most probable point of failure and the probability of failure for the HE PBX 9502 were determined.

97 MATHEMATICS AND COMPUTING↗

A method of alternating characteristics with application to advection-dominated environmental systems

We present a numerical method for solving a class of systems of partial differential equations (PDEs) that arises in modeling environmental processes undergoing advection and biogeochemical reactions. The salient feature of these PDEs is that all partial derivatives appear in linear expressions. As a result, the system can be viewed as a set of ordinary differential equations (ODEs), albeit each one along a different characteristic. The method then consists of alternating between equations and integrating each one step-wise along its own characteristic, thus creating a customized grid on which solutions are computed. Since the solutions of such PDEs are generally smoother along their characteristics, the method offers the potential of using larger time steps while maintaining accuracy and reducing numerical dispersion. The advantages in efficiency and accuracy of the proposed method are demonstrated in two illustrative examples that simulate depth-resolved reactive transport and soil carbon cycling.

54 ENVIRONMENTAL SCIENCES↗

Effect of transition metal substitution on elastoplastic properties of LiMn 2 O 4 spinel

LiMn 2 O 4 (LMO) derivatives partially substituted with transition metals (e.g., Ni) have received attention for their higher energy density achieved at higher charge voltage than pure LMO, and may be attractive cathode candidates for emerging all solid state batteries. Accurate mechanical properties of these high voltage spinels are required for prediction of electrode and electrolyte fracture that may compromise battery lifetime and performance. In this work, we quantified the Young’s elastic modulus E and hardness H for LMO, LiMn 1.5 Ni 0.5 O 4 (LMNO), and LiMn 1.5 Ni 0.42 Fe 0.08 O 4 (LMNFO) spinel microparticles via instrumented grid nanoindentation. Elastic modulus E and hardness H increased by more than 40% (up to 145 and 11 GPa, respectively) as a result of Ni or Ni/Fe substitution; such substitution also reduces the lattice parameter and increases the oxidization state of Mn. In conclusion, these results demonstrate how changes in transition metal occupancy can significantly affect the mechanical properties of LMO spinel, and provide critical parameters for designing against fracture in all solid state batteries.

36 MATERIALS SCIENCE↗

An efficient cost reduction procedure for bounded-control LQR problems

A novel approach has been developed for approximating the solution to the constrained LQR problem, based on updating the final state and costate of a related regular problem, and on slightly shifting the switching times (the instants when the control meets the constraints). The main result is the expression of a suboptimal control in feedback form using the solution of some compatible Riccati equation. The gradient method is applied to reduce the cost via explicit algebraic formula for its partial derivatives with respect to the hidden final state/costate of the related regular problem and to the switching times. The numerical method is termed efficient because it does not involve integrations of states or cost trajectories, and reduces to its minimum the dimension of the unknown parameters at the final condition. All the relevant objects are calculated from a few auxiliary matrices, which are computed only once. The scheme is here applied to two case studies whose optimal solutions are known. The first example is a two-dimensional model of the ‘cheapest stop of a train’ problem. The second one refers to the temperature control of a metallic strip leaving a multi-stand rolling mill, a problem with a high-dimensional state.

97 MATHEMATICS AND COMPUTING↗

Exact solution of the relativistic Dunkl oscillator in (2+1) dimensions

In this paper we study the (2+1)-dimensional Dirac–Dunkl oscillator coupled to an external magnetic field. Our Hamiltonian is obtained from the standard Dirac oscillator coupled to an external magnetic field by changing the partial derivatives by the Dunkl derivatives. We solve the Dunkl–Klein–Gordon-type equations in polar coordinates in a closed form. The angular part eigenfunctions are given in terms of the Jacobi–Dunkl polynomials and the radial functions in terms of the Laguerre functions. Also, we compute the energy spectrum of this problem and show that, in the non-relativistic limit, it properly reduces to the Hamiltonian of the two dimensional harmonic oscillator.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Analysis and prediction of reaction kinetics using the degree of rate control

“Degree of rate control” (DRC) analysis provides a quantitative approach for analysing the kinetics of multi-step reaction mechanisms that has been widely applied to both heterogeneous and homogeneous catalysis research, as well as electrocatalysis. The DRC of any given transition state or intermediate is defined as a partial derivative such that it approximately equals the fractional increase in net rate to the product of interest per differential decrease in its standard-state free energy for that species (÷RT), holding constant the standard-state free energies of all other transition states and intermediates. Even very complex mechanisms usually have only a few species with non-zero DRCs and are thus the species whose interactions with the catalyst most strongly affect the net rate. These key DRC values thus offer a simple and intuitive route to optimize catalyst materials, especially with the assistance of computational methods like density functional theory (DFT). These high-DRC species are also the species whose energetics must be most accurately measured or calculated to achieve an accurate kinetic model for any reaction mechanism. In simple cases with a single “rate-determining step”, the DRC for its transition state (TS) is + 1. Catalyst-bound intermediates, on the other hand, often have negative DRCs equal to a small integer times their fractional occupancy of catalyst sites. The apparent activation energy equals a weighted average of the standard-state enthalpies (relative to reactants) of all the species (intermediates, transition states and products) in the reaction mechanism, each weighted by its DRC (+RT). It has been shown that the apparent transfer coefficient in electrocatalysis, an inverted form of the Tafel slope, is a weighted average of the number of electrons transferred to generate each intermediate or product species in the mechanism, weighted again by the DRC. Quantitative analysis of kinetic isotope effects (KIEs, or the ratio of net rates for different reactant isotopes) in complex mechanisms has shown that the logarithm of the KIE equals the weighted average over all species in the mechanism of the difference between the two isotopes in their standard-state free energies (÷RT), again weighted by the DRC. The reaction orders with respect to fluid-phase concentrations of reactants, products and intermediates have also been proven to be directly related to DRCs. Thus, there are numerous experimental observables which equate to short linear combinations of DRCs, so that combinations of experimental measurements might provide access to DRC values. Since its invention for transition states in 1994 and its generalization to include intermediates in 2009, the DRC has thus far mainly been calculated for microkinetic models based either entirely on DFT or on DFT with the key energies (i.e., those for high-DRC species) being fine-tuned to match experiments. The relationships summarized in this work provide new opportunities for using experiments earlier in the development and optimization of microkinetic models that require input from computational catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗