SEARCH · Search NASA

Results for “path”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

DOE OSTI2024

A Stochastic Calculus Approach to Boltzmann Transport

Traditional Monte Carlo methods for particle transport utilize source iteration to express the solution, the flux density, of the transport equation as a Neumann series. Our contribution is to show that the particle paths simulated within source iteration are associated with the adjoint flux density and the adjoint particle paths are associated with the flux density. Here, we make our assertion rigorous through the use of stochastic calculus by representing the particle path used in source iteration as a solution to a stochastic differential equation (SDE). The solution to the adjoint Boltzmann equation is then expressed in terms of the same SDE, and the solution to the Boltzmann equation is expressed in terms of the SDE associated with the adjoint particle process. An important consequence is that the particle paths used within source iteration simultaneously provide Monte Carlo samples of the flux density and adjoint flux density in the detector and source regions, respectively. The significant practical implication is that particle trajectories can be reused to obtain both forward and adjoint quantities of interest. To the best our knowledge, the reuse of entire particles paths has not appeared in the literature. Monte Carlo simulations are presented to support the reuse of the particle paths.

Boltzmann transport↗

DOE OSTI2025

ECON-T and ECON-D: Endcap Concentrator ASICs for the CMS HGCAL

With over 6 million channels, the High Granularity Calorimeter (HGCAL) for the CMS HL-LHC Upgrade presents a unique data challenge. The ECON ASICs provide critical on-detector data reduction for the 40 MHz trigger path (ECON-T) and 750 kHz data acquisition path (ECON-D) of the HGCAL. The ASICs, fabricated in 65 nm CMOS, are rad-tolerant (600 Mrad) with low power consumption (<2.5 mW/channel). This presentation is the first comprehensive description of the ECON designs, first functionality and radiation tests for the ECON-T ASIC, and first results from the full production of 75k ECON-D and ECON-T ASICs.

Bergamin, G. [CERN] (ORCID:0000000285758704)↗

DOE OSTI2024

Evaluation of the EarthSHAB Stratospheric Solar Hot Air Balloon Flight Prediction Model Using Balloon Trajectory Data

Abstract The heliotrope is a solar balloon design which is constructed out of painter’s plastic, and the exterior is coated in charcoal powder. Darkening the plastic gives the balloon a high solar absorptance, which allows it to ascend into the lower stratosphere and float for hours at a time. The balloons have previously been used to lift scientific instruments into the stratosphere to study chemical explosions, earthquakes, and stratospheric aerosols. They have also been proposed as a platform for planetary exploration. Flight predictions are crucial to preflight planning to reduce safety risks and meet flight objectives. However, there exists a wide range of possible flight paths due to varying environmental conditions and solar balloon configurations. EarthSHAB is one such software that was designed to support flight planning using the weather forecasts and balloon properties to predict the flight path of a solar balloon. We compare EarthSHAB-simulated flight paths to a set of observed flight paths for the 3.5-m diameter heliotrope design called the “Cloudskimmer.” Using the criteria that the modeled paths must fall within 5% of the observations to be considered successful, we found that EarthSHAB successfully predicted the Cloudskimmer ascent rate and average float altitude 10% and 90% of the time, respectively. We also found that the average difference in the observed and predicted landing locations was 97 km and landing times were 54 ± 38 min. Significant deviations between the observed and predicted ascent rates and excursions at float were found to be associated with heavy payloads and convective cloud development, respectively. Significance Statement Solar balloons are used to lift scientific instruments into the lower stratosphere for hours at a time to study chemical explosions, earthquakes, stratospheric aerosols, and more. The flight paths of solar balloons can be difficult to predict due to variability in their design and surrounding environment. We evaluate the accuracy of EarthSHAB, a software that predicts the altitude profile and horizontal trajectory of a solar balloon using inputs such as the weather, balloon size, and balloon mass. Our results suggest that for the balloon design used in this study, EarthSHAB is best suited for modeling the behavior of balloons with lightweight payloads that do not fly within or directly above clouds.

Lien, Jessica M. [Sandia National Laboratories, Al↗

DOE OSTI2025

Building Performance Standards and Energy Code Alignment - Technical Brief

Building energy codes focus on building design, construction and renovation and have significantly increased building efficiency since the first national energy code was published in 1975. Most jurisdictions have energy codes based on ANSI/ASHRAE/IES Standard 90.1 (hereto referred to as Standard 90.1) and the International Energy Conservation Code (IECC). Compliance options available in these model energy codes include a prescriptive path, whole building performance paths – including IECC Total Building Performance (TBP), Standard 90.1 Energy Cost Budget (ECB) method and Performance Rating Method (PRM) – and system performance paths for envelope and heating, ventilation, and air-conditioning systems. Building performance standard (BPS) policies are an emerging policy tool used by jurisdictions to reduce the operational energy use or greenhouse gas (GHG) emissions of the existing commercial building stock. BPS policies vary widely between jurisdictions and are tailored to each location’s climate and energy goals. Intuitively, projects that met a recent edition of the energy code should comply with the BPS targets. However, some new buildings may struggle with meeting the BPS for the following reasons: 1. Energy codes focus on the design of the building and its projected ability to perform efficiently, while BPS compliance is dependent on the actual ongoing performance of the building, considering variables like occupancy, operation, and maintenance. 2. There are significant differences in the methodologies used to determine BPS compliance versus code compliance, including how each handles compliance metrics, handling of building amenities, and renewable energy generation. 3. The prescriptive compliance path in the energy code is based on performance of individual building components, as opposed to the performance compliance path which accounts for holistic building design strategies and interdependent building systems. This can result in a significant variability in post-occupancy performance for buildings built using the prescriptive path. Designs on the lower end of the permitted efficiency range may struggle with meeting the BPS.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2025

Numerical case study of the aerosol–cloud interactions in warm boundary layer clouds over the eastern North Atlantic with an interactive chemistry module

The presence of warm boundary layer stratiform clouds over the eastern North Atlantic (ENA) region is commonly influenced by the Azores High, especially during the summer season. To investigate comprehensive aerosol–cloud interactions, this study employs the Weather Research and Forecasting model coupled with a chemistry component (WRF-Chem), incorporating aerosol chemical components that are relevant to the formation of cloud condensation nuclei (CCN) and accounting for aerosol spatiotemporal variation. This study focuses on aerosol indirect effects, particularly the long-range transport of aerosols, in the ENA region under three different weather regimes: a ridge with a surface high-pressure system, a post-trough with a surface high-pressure system, and a weak trough. The WRF-Chem simulations conducted at a near-large-eddy scale offer valuable insights into the model's performance, especially in terms of its ability to use high spatial resolution to capture mesoscale cloud features across various weather regimes. Our result shows that introducing 5 times more aerosols to either non-precipitating or precipitating clouds significantly increases ambient CCN numbers, resulting in, to varying degrees, higher liquid water path (LWP) values. The substantial aerosol–cloud interaction especially occurs in the precipitating clouds and demonstrates the susceptibility of the LWP to changes in CCN under different regimes. Conversely, thin, non-rain clouds at the edges of a cloud system are prone to evaporation, exhibiting an aerosol drying effect. The aerosols released during this process transition back to the accumulation mode, facilitating future activation. This dynamic behavior is not adequately represented in prescribed-aerosol simulations.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Magnetized liner inertial fusion platform development to assess performance scaling with drive parameters

Magnetized liner inertial fusion (MagLIF) experiments have demonstrated fusion-relevant ion temperatures up to 3.1 keV and thermonuclear production of up to 1.1 × 1013 deuterium–deuterium neutrons. This performance was enabled through platform development that provided increases in applied magnetic field, coupled preheat energy, and drive current. Advanced coil designs with internal reinforcement enabled an increase from 10 to 20 T. An improved laser pulse shape, beam smoothing, and thinner laser entrance foils increased preheat energy coupling from less than 1 to 2.3 kJ. A redesign of the final transmission line and load region increased peak load current from 16 to 20 MA. The wider range of input parameters was leveraged to study target performance trends with preheat energy, applied magnetic field, and peak load current. Ion temperature and neutron yield generally followed trends in two-dimensional clean Lasnex calculations. Stagnation performance improved with peak load current when other input parameters were also increased such that convergence was maintained. This dataset suggests that reducing convergence to less than 30 would improve predictability of target performance. Lasnex was used to identify a simulation-optimized scaling path, which suggests 10+ kJ of fusion yield is possible on the Z facility with achievable input parameters. This path also indicates >10 MJ could be generated through volume burn on a future facility with a path to high yield (>200 MJ) using cryogenic dense fuel layers. The newly developed MagLIF platform enables exploration of both this simulation optimized scaling path and a recently developed similarity-scaling path.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

Differentially Private Map Matching (DPMM) v1.0

Human mobility trajectories provide valuable information for developing mobility applications, as they contain diverse and rich information about the users. User mobility data is valuable for various applications such as intelligent transportation systems (ITS), commercial business models, and disease-spread models. However, such spatio-temporal traces may pose a threat to user privacy. GPS trajectories in their raw form are not suitable for transportation studies, as they require matching locations with nearest road links — a process called map-matching. This software implements a differential privacy (DP)-based map-matching algorithm, called DPMM, that generates link-level location trajectories in a privacy-preserving manner to protect users' origin destinations (OD) and travel paths. OD privacy is achieved by injecting Planar Laplace noise to the user OD GPS points. Travel-path privacy is provided with randomized travel path construction using exponential DP mechanism. The injected noise level is selected adaptively, by considering the link density of the location and the functional category of the localized links. For path privacy, our mechanism samples waypoints and selects candidate paths between waypoints. DPMM provides privacy effectively with respect to link density instead of other trajectory samples in the database compared to other privacy mechanisms. Compared to the different baseline models our DP-based privacy model offers closer query responses to the raw data in terms of individual and aggregate trajectory-level statistics with an average at absolute deviation from the baseline for individual statistics on ϵ = 1.0. Beyond individual trajectory statistics, the DPMM outperforms the other benchmark DP-based mechanisms on different aggregate statistics with up to 8x improvement in utility.

Peisert, Sean [Lawrence Berkeley National Laborato↗

DOE OSTI2026

A Nonergodic Ground-Motion Model for the San Francisco Bay Area for Small-Magnitude Earthquakes

ABSTRACT Recently, generative models have become a computationally efficient alternative to physics-based numerical simulations of ground motions. Neural networks can learn from existing ground-motion data to generate unobserved ground-motion data at new source and site locations. A key challenge with generative models is ensuring that predicted ground motions remain within a physically realistic range. For this purpose, we developed an empirical, nonergodic ground-motion model (GMM) for small-magnitude earthquakes in the San Francisco Bay area based on about 5000 recordings per component for Mw ≤ 4 earthquakes. The nonergodic GMM predicts spatially varying median source, site, and path effects for both the Fourier amplitude spectrum (FAS) and the Fourier phase derivative (a proxy for duration), as well as the corresponding epistemic uncertainty for each term. For FAS, our model shows above-average source and site effects in the western part of the region and below-average effects in the eastern part, with regional effects exhibiting larger spatial correlation lengths with increasing frequency. For duration, the source term is negligible for small-magnitude earthquakes, and the site term leads to site-specific variations up to 5 s. Path effects for FAS and duration depend on the source–site pair and are extrapolated spatially using recent methods for path-effect modeling. The aleatory variability of the within-site within-path residuals is similar to the variability found in previous studies for other regions. The nonergodic model provides two key contributions: first, median adjustment terms that are transferable to larger magnitude earthquakes, further reducing aleatory variability in probabilistic seismic hazard analysis; second, region-specific criteria for validating machine learning-based ground-motion generators to evaluate whether synthetic ground motions exhibit physically realistic source, site, and path effects.

Lacour, Maxime↗

DOE OSTI2025

Vertical column dual-comb spectroscopy to a TBS

Open-path dual-frequency-comb spectroscopy (DCS) is a broadband, high spectral resolution, and high precision method for measuring gas concentrations over kilometer-scale paths. It has been used for detection and quantification of emissions of pollutants, hazardous gasses, and greenhouse gasses (GHGs). DCS has been shown to measure trace-gas mixing ratios with 0.14%-0.4% agreement between instruments. To achieve high signal-to-noise ratios (SNRs) with DCS, comb light is targeted onto a retroreflector at the end of the measurement path, which returns the signal to a detector co-located with the launch signal. Installing the retroreflector on a mobile platform such as a balloon or unmanned aerial vehicle (UAV) extends the capabilities of DCS by enabling variable path lengths, greater mobility, and access to higher altitudes. Mobile-target DCS has many uses in plume and leak detection, emissions modeling, and planetary boundary layer (PBL) studies. It is a promising method for observing vertical distributions of GHGs and mixing processes in the PBL, which are difficult to measure but important for pollution and climate monitoring as well as for understanding transport of gasses through the atmosphere. Tethered balloons are an intriguing platform because they enable longer flight durations and higher altitudes than easily obtainable with a UAV and thus allow for column measurements up to and above the PBL. New measurements completed in October/November 2024 reach the highest altitudes above ground level yet achieved by mobile-target DCS. For these measurements, the retroreflector was mounted on a 7 m diameter tethered helium balloon. An actively tracking gimbal on the ground holds the DCS launch telescope and keeps the 5 cm beam pointed onto the retroreflector while the balloon is lifted, lowered, and moved by wind and turbulence.

atmosphere↗

DOE OSTI2024

Multi-level Monte Carlo methods in chemical applications with Lennard-Jones potentials and other landscapes with isolated singularities

We describe and compare outcomes of various Multi-Level Monte Carlo (MLMC) method variants, motivated by the potential of improved computational efficiency over rejection based Monte Carlo, which scales poorly with problem dimension. With an eye toward its application to computational chemical physics, we test MLMC's ability to sample trajectories on two problems — a familiar double-well potential, with known stationary distributions, and a Lennard-Jones solid potential (a Galton Board). By sampling Brownian motion trajectories, we are able to compute expectations of observable averages. These multi-basin potential energy problems capture the essence of the challenges with using MLMC, namely, maintaining correspondence of sample paths as time-resolution is varied. Addressing this challenge properly can lead to MLMC significantly outperforming standard Monte Carlo path sampling. We describe the essence of this problem and suggest strategies that circumvent diverging multilevel sample paths for an important class of problems. In the tests we also compare the computational cost of several, “adaptive,” variants of MLMC. Our results demonstrate that MLMC overcomes the collision, time scale limitation of the more familiar Brownian path MC samplers, and our implementation provides tunable error thresholds, making MLMC a promising candidate for application to larger and more complex molecular systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Localization of infrasonic sources via Bayesian back projection

SUMMARY A Bayesian framework is investigated for event-specific localization of infrasonic sources using back projection ray tracing. Direction-of-arrival information from array-based detection analysis is used to initialize a back projection ray path originating from the detecting array location and quantifying propagation characteristics from hypothetical source locations. The Fisher statistic, computed from the array’s beam coherence, is mapped into uncertainty in the launch angles of the ray path. Auxiliary parameters previously introduced for solving the Transport equation to compute geometric spreading along ray paths are used to map uncertainty in the ray launch angles into spatial and temporal uncertainties in the ray path. An atmospheric ensemble approach is applied to account for atmospheric uncertainty, and the relation between uncertainties in the atmospheric state and confidence in estimated localization are evaluated using several ensembles with specified variances. The method is evaluated using a synthetic event in the western United States constructed via forward propagation simulations as well as a single-station, multi-arrival detection from a surface explosion in the western United States. Localization results using this event-specific approach are more accurate and exhibit improved precision than existing Bayesian localization methods that leverage generalized, pre-computed propagation statistics.

58 GEOSCIENCES↗

DOE OSTI2025

Operator dynamics in Floquet many-body systems

We study operator dynamics in many-body quantum systems, focusing on generic features of systems that are ergodic, spatially extended, and lack conserved densities. Quantum circuits of various types provide simple models for such systems. We focus on Floquet quantum circuits, comparing their behavior with what has been found previously for circuits that are random in time. Floquet circuits, which have discrete time-translation symmetry, represent an intermediate case between circuits that are random in time and lack any symmetry, and systems with a time-independent Hamiltonian and continuous time-translation invariance. By making this comparison, one of our aims is to identify signatures of time-translation symmetry in Floquet operator dynamics. To characterize behavior we examine a variety of quantities in solvable models and numerically: operator autocorrelation functions; the partial spectral form factor; the out-of-time-order correlator (OTOC); and the paths in operator space that make the dominant contributions to the ensemble-averaged autocorrelation functions. Our most striking result is that ensemble-averaged autocorrelation functions show behavior that is distinctively different in Floquet systems compared to systems in which successive time-steps are independent. Specifically, while average autocorrelation functions decay on a microscopic timescale for circuits that are random in time, in Floquet systems they have a late-time tail with a duration that grows parametrically with the size of the operator support. In the simplest models this tail is separated from the initial decay by a minimum, so that the average autocorrelation function has an intermediate-time peak. The existence of these tails provides a way to understand deviations of the spectral form factor from random matrix behavior at times shorter than the Thouless time. In contrast to this feature in autocorrelation functions, we find no new aspects to the behavior of OTOCs for Floquet models compared to random-in-time circuits. We show that this difference between averaged autocorrelation functions and OTOCs can be understood in terms of the paths in operator space that contribute to the two quantities: paths for the former retain a limited support at late times, while paths for the latter are dominated by operator spreading. Published by the American Physical Society 2025

Yoshimura, Takato (ORCID:0000000309159846)↗

DOE OSTI2025

An infrasound source analysis of the OSIRIS-REx sample return capsule hypersonic re-entry

The OSIRIS-REx sample return capsule's hypersonic re-entry into the atmosphere is a rare opportunity to test a variety of sonic boom source models since the projectile dimensions are well characterized. While the as-flown flight path is unknown, the predicted flight path enables a rough approximation of the source Mach number and location. Six infrasound microphones deployed in the boom carpet along the predicted flight path recorded impulsive signals from the OSIRIS-REx re-entry. Using a suite of atmosphere profiles and the geometric acoustics approximation, we estimate locations with uncertainty estimates along the flight path from which the signals were emitted. Acoustic overpressure and signal duration predictions from Whitham's far field theory, Carlson's simplified sonic boom prediction method, and a drag-dominated hypersonic model are analyzed with uncertainty estimates from the location estimate. While the Carlson simplified sonic boom prediction method could be accurate, our preference is for the drag-dominated source model. Using this source model with an inviscid Burgers's equation solver for propagation, we obtained an excellent match to the recorded data. In conclusion, these results will help better inform future sample return capsule re-entry observation campaigns as well as contribute to a better understanding of high altitude infrasonic sources.

58 GEOSCIENCES↗

DOE OSTI2025

Computer Programs For Analysis Of Thermally Reactive Tracer Tests In Geothermal Reservoirs

The Tracer Analysis Toolbox (TAT) is a stand-alone executable software package that focuses on reservoir monitoring, using changes in concentration of thermally degrading tracers between and injection well and a production well to reflect the temperature-time histories along flow paths through the reservoir. By conducting such tests periodically, the thermal evolution of the flow paths connecting injection wells to production wells can be monitored. Because this approach is sensitive to temperature along the whole path, it can detect changes well before they occur at the distal end of the path (i.e., the production well). Thus, the thermally degrading tracer method provides early detection of thermal decline before it impacts that well. The goal of TAT is to simplify planning of a reactive tracer monitoring campaign and interpretation of results by providing: (1) tracer test planning and analysis tools to define the necessary kinetic parameters, injection concentrations, and other tracer parameters that are suitable for the expected reservoir residence time and temperature, (2) identification of tracers with suitable characteristics (defined by (1)) and (3) a suite of analysis programs to analyze tracer test results.

Plummer, MitchellAaron [Idaho National Laboratory ↗

DOE OSTI2025

Novel Results Visualization for Dynamic PSA and New Modeling Features in EMRALD

The Event Modeling Risk Assessment Linked Diagram (EMRALD) tool, developed at the Idaho National Laboratory (INL), was designed to simplify the creation of dynamic models and support various research projects. One of the primary goals of EMRALD was to provide visual methods for modeling. EMRALD consists of two main components: a web-based user interface for model development and a solve engine for running model simulations. Over time, it has evolved to meet the diverse needs of its users. Initially, EMRALD's results were simple text outputs with final key state percentages and uncertainty bounds. However, because EMRALD utilizes a three-phase discrete event simulation and tracks the paths of each simulation run leading to a key state, there is significant potential to analyze large sets of path results data, including state paths, events, and timing. Visualizing this data meaningfully posed a challenge. To address this, a novel time-based Sankey diagram was developed. EMRALD exports results data in a format that can be opened in this Sankey viewer, allowing users to visualize paths, occurrences, events, and probability data for the entire simulation run in a single diagram. Moreover, when EMRALD was first created, there were limited tools capable of meeting its graphical requirements, many of which are no longer supported. In 2024, a new web-based interface was developed using modern graphing tools, enabling additional modeling features. This paper discusses the new dynamic PSA results visualization capability and the enhanced modeling tools available in EMRALD.

97 - MATHEMATICS AND COMPUTING↗

DOE OSTI2024

Commercial Building Prototypes Based on ANSI/ASHRAE/IES Standard 90.1-2019 Appendix G PRM: Technical Support Document

The two paths for documenting compliance with ANSI/ASHRAE/IES Standard 90.1 are the prescriptive path and the performance path. Beyond code programs and rating systems (for example, USGBC-LEED ) are primarily known to use a third path – the Appendix G Performance Rating Method. An update in the 2016 edition of Standard 90.1 approved the Appendix G Performance Rating System for code compliance, extending its application and allowing for greater consistency of modeling rules for code and beyond code building energy modeling. The Appendix G PRM provides rules for the development of whole building energy models of baseline and proposed models for calculating the “performance cost index target” value using the simulated energy results of the baseline and proposed models and the building performance factors published in Table 4.2.1.1 of the Standard. This report documents (1) the methodology used for development of the baseline and proposed energy models of the Pacific Northwest National Laboratory and U.S. Department of Energy commercial building prototypes using the Appendix G Performance Rating Method; and (2) the building performance factors that were calculated using those models.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2025

Advanced Processing of Coal and Coal Waste to Produce Graphite for Fast-Charging Lithium-Ion Battery Anode

The University of North Dakota (UND) Energy & Environmental Research Center (EERC), in collaboration with the UND Center for Process Engineering Research (CPER), conducted a project to validate two technologies capable of converting North Dakota lignite and lignite coal waste to high-quality graphite for fast-charging lithium-ion battery (LIB) anode. The project was conducted over about 3 years from April 7, 2022, to July 6, 2025. The two technological paths pursued in this project include path A – direct conversion of coal or coal waste to graphite by the upgraded carbon ores to products (UCOP) process being developed at the EERC and path B – lignite-derived coal tar pitch (CTP) conversion to graphite (CTP2G) process being developed at CPER. The results from this project validate the two technological approaches and are expected to be an integral part of a portfolio of emerging technologies for making high-quality graphite not only from North Dakota lignite, but from all ranks of U.S. domestic coal and coal waste resources. The quality of the graphite produced by these technologies is high enough for various applications, including batteries for the fast-growing electric vehicle industry, energy storage applications, electric arc furnace electrodes for steel production, and graphene production, among others. Although the two technologies can produce high-quality graphite, they are fundamentally different in that the UCOP technology provides a direct path to transform coal to graphite, while the CTP2G technology needs to go through a CTP intermediate and a coking process for the intermediate, which requires a special facility to accomplish. For application in the industry, the UCOP process is designed to be more flexible, with feedstock to include potentially any carbonaceous material such as all coal ranks and biochar, while the CTP2G process is designed to utilize CTP as the starting precursor. The key project accomplishments include the following: • Successful preparation of high-quality synthetic graphite from North Dakota lignite coal/coal wastes and lignite-derived CTP. • Patent application has been filed for the UCOP process and an internal invention disclosure has been filed for the CTP2G process. • The produced graphite performs better than a commercial battery-grade sample in LIB coin cells, especially fast-charging capability, stability, and long-duration cycling. • Coin-type Li-ion half-cells with CTP2G graphite showed excellent performance, with >370 mAh/g capacity, >90% initial coulombic efficiency, and 93%/67% retention at 1C/2C rate, which outperforms commercial graphite in charging speed, stability, and cycling. • Results of fabricated 18650 cells were consistent with the observations in coin cells. • Preliminary techno-economic analysis (TEA) estimates for the UCOP technology indicate a manufacturing cost of about $\$$39/kg based on 50-metric ton/year capacity. • Preliminary TEA estimates for the CTP2G technology indicate a market price of about $\$$7107/ton ($\$$7/kg) based on 22,000-ton/year production capacity.

01 COAL, LIGNITE, AND PEAT↗

DOE OSTI2026

Requirements Description of DASSH-F

This report reviews the modeling and simulation capabilities of Argonne National Laboratory’s DASSH code that is used in present reactor analysis activities. These capabilities will be used to establish the set of verification tasks necessary to verify DASSH for use on commercial projects. A similar approach was taken for the PERSENT, REBUS and DIF3D software packages. The DASSH program is a thermal analysis code designed to rapidly allow a reactor design engineer to obtain flow rates requirements that satisfy peak temperature constraints in the domain. DASSH is a follow-on development to the SE2-ANL software and SUPERENERGY-2 software that it is based upon. DASSH was designed to account for both neutron and gamma heating and is inherently connected to the GAMSOR part of the ARC suite of fast reactor analysis software. SE2-ANL is a developed piece of software from the 1980s while DASSH is a modern implementation with notable improvements in geometry handling. The most important upgrade of DASSH relative to SE2-ANL is that it can analyze multiple time points in a single run where SE2-ANL can only treat a single time point. This allows the user to understand the impact of and search the flow distribution for the entire operational period of a reactor design considering pressure drop, peak coolant and fuel temperatures, and thermal striping. DASSH has three input paths that have to be verified. The first input path builds the geometry and power distribution based upon the DIF3D model but ignores the gamma heating aspects of the problem. The second input path also builds the geometry from the DIF3D model but it takes the neutron and gamma heating distributions from GAMSOR. The third input path is to take the geometry and power distribution directly from user input (i.e. not coupled to DIF3D or GAMSOR). DASSH also has many built in correlations for material properties along with a user defined specification of the fuel, structure, and coolant properties. There are correlations for flow split, mixing, pressure drop, and heat transfer coefficients (subchannel rather than a direct methodology). In total, verification of DASSH will require an extensive testing to cover all possible user features of the software.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗