Search NASA⌕ Search

SEARCH · Search NASA

Results for “patterned arrays”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

The sweeper spectrometer for neutron invariant-mass spectroscopy at FRIB

Neutron invariant-mass spectroscopy (NIMS) is a key technique for studying unbound and weakly bound nuclei at the limits of stability. At the Facility for Rare Isotope Beams (FRIB), such measurements are performed using the Sweeper spectrometer, a large-gap, high-rigidity dipole system coupled to the MoNA-LISA neutron detector arrays. To meet the demands imposed by higher beam energies (>130 MeV/u) and the broad cocktail-beam selection available at FRIB, the spectrometer has recently been upgraded to improve particle-identification and detection performance. Upstream of the reaction target, a plastic scintillator with Silicon photomultiplier (SiPM) readout provides the global trigger and time reference, two parallel plate avalanche counters (PPACs) track the trajectories of incoming beam particles, and a silicon PIN detector measures the energy loss, ΔE, for charge (Z) identification. After the Sweeper magnet, the trajectories of the reaction products are tracked by two micro-pattern drift chambers (MPDCs), their charge (Z) is identified by a Frisch-grid ionization chamber (FG-IC), and their mass-to-charge ratio (A/Q) is deduced by time-of-flight measurement using a fast plastic scintillator read out by an array of photomultiplier tubes (PMTs). The detection system also incorporates the Modular Neutron Array (MoNA) for neutron detection and the CAESium-iodide scintillator ARray (CAESAR) for high-efficiency γ-ray measurements to enable full kinematic reconstruction. Performance was evaluated using a cocktail beam around 37 Al accelerated at E ≈ 130 MeV/u during the first FRIB campaign, demonstrating the readiness of the upgraded system for future studies of nuclei at and beyond the neutron drip line.

Particle identification methods↗
DOE OSTI2020

Geometrically Tunable Beamed Light Emission from a Quantum‐Dot Ensemble Near a Gradient Metasurface

Abstract Optical metasurfaces have been widely investigated in recent years as a means to tailor the wavefronts of externally incident light for passive device applications. At the same time, their use in active optoelectronic devices such as light emitters is far less established. This work explores their ability to control the radiation properties of a nearby continuous ensemble of randomly oriented incoherent dipole sources via near‐field interactions. Specifically, a film of colloidal quantum dots is deposited on a plasmonic metasurface consisting of a 1D array of metallic nanoantennas on a metal film. The array is designed to introduce a linear phase profile upon reflection, and a bi‐periodic nanoparticle arrangement is introduced to ensure adequate sampling of the desired phase gradient. Highly directional radiation patterns are correspondingly obtained from the quantum dots at an enhanced emission rate. The underlying radiation mechanism involves the near‐field excitation of surface plasmon polaritons at the metal film, and their selective diffractive scattering by the metasurface into well‐collimated beams along predetermined geometrically tunable directions. These results underscore the distinctive ability of metasurfaces to control radiation properties directly at the source level, which is technologically significant for the continued miniaturization and large‐scale integration of optoelectronic devices.

Wang, Xiaowei↗
DOE OSTI2026

Single nucleotide variants drive evolutionary phage-host arms race in anaerobic carbon dioxide-converting microbiome

Microbial bioconversions are shaped by environmental perturbations and the adaptation of resident microbiomes. Prokaryotes coexist with bacteriophages, yet their coevolutionary trajectories remain underexplored. Here, we investigate the effects of a cultivation vessel leak on an anaerobic consortium performing carbon dioxide reduction. Using time-series shotgun metagenomic sequencing, we reconstruct microbial and viral genomes to track community shifts. We further apply single-nucleotide variant profiling and CRISPR array analysis to monitor viral microdiversity and host defense mechanisms. After bioaugmentation restores bioconversion efficiency, the consortium undergoes pronounced restructuring, with new dominant taxa emerging from the rare biosphere. We identify patterns consistent with phage predation selectively removing certain species, while others exhibit resilience to infection. This shift aligns with a widespread viral outbreak and a transient increased frequency of single nucleotide variants in bacterial CRISPR–Cas defense genes. Expansion of CRISPR spacers further supports that CRISPR-mediated processes influence microbial resilience. Concurrently, phages infecting resilient hosts exhibited adaptive evolution, marked by high genetic heterogeneity. Selective pressure varies across their genomes, targeting infectivity genes and protospacer-adjacent motifs. These findings highlight a dynamic evolutionary arms race driven by the selection of beneficial genetic variants, providing a mechanistic framework for multi-omics investigations, and informing biotechnological applications, including phage-based microbiome manipulation.

Ghiotto, G↗
DOE OSTI2024

ICED: An Integrated CGRA Framework Enabling DFVS-Aware Acceleration

oarse-grained reconfigurable arrays (CGRAs) are a promising solution to enable energy-efficient acceleration of applications from different domains. By leveraging reconfiguration at the functional level, they can adapt to significantly different computational patterns. Existing CGRA mapping approaches extract instruction-level parallelism, exploit loop-pipelining opportunities, guarantee the data dependency, and target high throughput of a given loop. However, the recurrence data-dependency in the DFG and the mismatch between required and available computing/communication resources complicate the mapping, and might lead to significant unbalances in the utilization of the CGRA's tiles. This results in wasted power for tiles with low utilization. Applying dynamic voltage and frequency scaling (DVFS) can potentially solve this challenge and improve energy efficiency by adjusting voltage and frequency of different tiles independently. CGRAs have also been successful in accelerating data-dependent streaming applications. However, in these applications, the execution time of each kernel in the pipeline might dynamically vary depending on the characteristics of the input. This also leads to under-utilization of resources for the dynamically changing kernels that do not limit the application throughput. DVFS can also improve energy efficiency for these applications by dynamically changing the voltage and frequency levels of tiles that host non performance-constraining kernels. This paper proposes ICEDTEA -- an integrated DVFS-aware framework to map applications on CGRAs that support power islands. ICEDTEA proposes a CGRA architecture supporting DVFS islands at varying granularity (from a single tile to a group of tiles) and the related DVFS-aware compilation and mapping toolchain. ICEDTEA is the first work that introduces DVFS support for spatio-temporal CGRAs at power-island levels. The experimental evaluation shows that ICEDTEA improves average utilization by 2.3$\times$ and energy-efficiency by 1.32$\times$ over a conventional CGRA. With streaming applications, ICEDTEA improves energy efficiency by 1.12$\times$ over a state-of-the-art CGRA that introduces partial dynamic reconfiguration to adapt to variations in kernels' throughput.

Tan, Cheng↗
DOE OSTI2023

Melanization slows the rapid movement of fungal necromass carbon and nitrogen into both bacterial and fungal decomposer communities and soils

Microbial necromass contributes significantly to both soil carbon (C) persistence and ecosystem nitrogen (N) availability, but quantitative estimates of C and N movement from necromass into soils and decomposer communities are lacking. Additionally, while melanin is known to slow fungal necromass decomposition, how it influences microbial C and N acquisition as well as elemental release into soils remains unclear. Here, we tracked decomposition of isotopically labeled low and high melanin fungal necromass and measured 13 C and 15 N accumulation in surrounding soils and microbial communities over 77 d in a temperate forest in Minnesota, USA. Mass loss was significantly higher from low melanin necromass, corresponding with greater 13 C and 15 N soil inputs. A taxonomically and functionally diverse array of bacteria and fungi was enriched in 13 C and/or 15 N at all sampling points, with enrichment being consistently higher on low melanin necromass and earlier in decomposition. Similar patterns of preferential C and N enrichment of many bacterial and fungal genera early in decomposition suggest that both microbial groups co-contribute to the rapid assimilation of resource-rich soil organic matter inputs. While overall richness of taxa enriched in C was higher than in N for both bacteria and fungi, there was a significant positive relationship between C and N in co-enriched taxa. Collectively, our results demonstrate that melanization acts as a key ecological trait mediating not only fungal necromass decomposition rate but also necromass C and N release and that both elements are rapidly co-utilized by diverse bacterial and fungal decomposers in natural settings.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Broadband Plasmonic Photocurrent Enhancement from Photosystem I Assembled with Tailored Arrays of Au and Ag Nanodisks

Plasmonic interactions between metal nanostructures and fluorophores have been increasingly employed to alter photoexcitation pathways in multichromophore photosynthetic proteins like photosystem I (PSI). Our recent experimental studies demonstrated a sixfold plasmon-enhanced photocurrent from PSI assembled on Fischer patterns of Ag nanopyramids. However, lack of control over the specific resonance modes limited the magnitude and selectivity of the plasmonic enhancement. To this end, the present study investigates the excitation wavelength-dependent plasmon-enhanced photocurrents from PSI immobilized around highly ordered Au (AuND) and Ag (AgND) nanodisks with dipolar plasmon resonances that are tuned to ~680 and 560 nm, respectively. Specifically, we report plasmon-induced photocurrent enhancements of ~6.8 and 17.5 for excitation wavelengths of ~680 and 565 nm, respectively, as compared to PSI assembled on planar ITO substrates. We also report the action spectra for photocurrent enhancements recorded over wavelengths of 395–810 nm with nine discrete LED light sources. The results indicate the following: (1) concurrence between the photocurrent-enhancement spectra from PSI assemblies and the plasmonic resonances for the respective nanopatterned substrates, and (2) broadband photocurrent enhancements due to plasmon-coupled photoactivation in the otherwise blind chlorophyll regions of the native PSI absorption spectra. Lastly, these intriguing findings pave the path for rational assembly of future biohybrid structures composed of natural light-harvesting antennae and plasmonic metal nanostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Scientific machine learning benchmarks

Deep learning has transformed the use of machine learning technologies for the analysis of large experimental datasets. In science, such datasets are typically generated by large-scale experimental facilities, and machine learning focuses on the identification of patterns, trends and anomalies to extract meaningful scientific insights from the data. In upcoming experimental facilities, such as the Extreme Photonics Application Centre (EPAC) in the UK or the international Square Kilometre Array (SKA), the rate of data generation and the scale of data volumes will increasingly require the use of more automated data analysis. Furthermore, at present, identifying the most appropriate machine learning algorithm for the analysis of any given scientific dataset is a challenge due to the potential applicability of many different machine learning frameworks, computer architectures and machine learning models. Historically, for modelling and simulation on high-performance computing systems, these issues have been addressed through benchmarking computer applications, algorithms and architectures. Extending such a benchmarking approach and identifying metrics for the application of machine learning methods to open, curated scientific datasets is a new challenge for both scientists and computer scientists. Here, we introduce the concept of machine learning benchmarks for science and review existing approaches. As an example, we describe the SciMLBench suite of scientific machine learning benchmarks.

42 ENGINEERING↗
DOE OSTI2024

PV Modules Temperature Variation and Patterns in Medium and Utility-Scale Floating PV Systems

This paper presents the preliminary results and findings of the four operational Floating PV systems across the USA. At each site, temperature of five PV modules located at North-West, North-East, Middle, South-West, and, South-East have been monitored through the Resistant Temperature Detector (RTD) sensors. Three RTDs were attached to each PV module on the rear-side along the diagonal at top, middle and bottom cells. The preliminary results reveal wide temperature differences among the inter and intra PV modules. Besides this, wave pattern temperatures were observed in a few PV modules. The final results, findings, and, factors responsible will be investigated during the next few months. Index Terms - photovoltaic module, floating PV systems, string, array, temperature, mismatch, utility scale.

ENGINEERING,SOLAR ENERGY↗
DOE OSTI2021

Strain-Induced Lateral Heterostructures in Patterned Semiconductor Nanomembranes for Micro- and Optoelectronics

The ability to tailor the energy band lineup of semiconductor materials plays a key role in the development of many electronic and optoelectronic devices and normally relies on heteroepitaxy. In this work, we report a different method, based on strain engineering, for the controlled introduction of variations in bandgap energy with lateral position in thin films. External stress is applied on Ge nanomembranes stacked with an array of amorphous-Si pillars in order to create a non-uniform strain (and therefore bandgap energy) distribution commensurate with the sample thickness variations. The resulting strain profiles are mapped using Bragg diffraction with a hard X-ray probe featuring nanoscale spatial resolution. Compared with traditional heterostructures grown by epitaxial techniques, these strain-engineered samples involve a single chemical composition and are not limited in the choice of compatible materials by any restriction imposed by lattice-matching requirements. Furthermore, their energy band lineups can be patterned in nearly arbitrary shapes using nanolithography to control the thickness profile and can be tuned actively by varying the applied stress. As a result, these structures are attractive for a wide range of device applications (including lasers, LEDs, solar cells, and thermoelectrics) that require complex heterostructure lineups with multiple bandgap energies.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Scalable multiplexed machine learning gas sensor chips for food classification

Multiplexed gas sensor arrays combined with machine learning have unlocked previously inaccessible applications for scent-based sensing. Current platforms are limited by overlapping sensing materials with similar compositions, leading to highly correlated responses, or multistep deposition processes that hinder scalability. In this work, we developed a 16-element monolithic chip with fully distinct sensing layers, enabling a truly heterogeneous array. The system consists of highly sensitive carbon nanotube field effect transistors that are functionalized through a single-step microdispensing method compatible with automated pipetting systems. The resulting chip produces characteristic signal patterns in response to object-specific scent profiles and, when combined with machine learning algorithms, can perform automated object identification. We demonstrate the classification of 16 different objects, including food spoilage and nut allergens, with a 92.6% overall prediction accuracy.

Bassil, Carla [University of California, Berkeley,↗
DOE OSTI2024

Analysis of Superconducting Magnet Quench Antenna Data

Quenching poses a serious problem for superconducting magnets operating at high currents. It occurs when the material transitions from the superconducting to the normal state, which leads to heating and potential damage to the magnet. To understand and mitigate quenching, the Magnet Department at Fermilab is developing and testing superconducting magnet quench antenna arrays. This study delves into the anomalous events preceding the quench during magnet training by analyzing the collected data. With the moving average and Fast Fourier Transform techniques, we investigate the trends and frequency patterns of the data. Moreover, we introduce an unsupervised anomaly detection algorithm based on Principal Component Analysis and DBSCAN clustering. It can autonomously identify events within background noise, without relying on any predefined event features. Our analysis reveals that the spatio-temporal distribution of these anomalous events has little connection to the quench location, indicating that a majority of them bear no relation to the quenching process.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Spatially and Temporally Resolved Velocimetry for Hypersonic Flows

The development of new hypersonic flight vehicles is limited by the physical understanding that may be obtained from ground test facilities. This has motivated the present development of a temporally and spatially resolved velocimetry measurement for Sandia National Laboratories (SNL) Hypersonic Wind Tunnel (HWT) using Femtosecond Laser Electronic Excitation Tagging (FLEET). First, a multi-line FLEET technique has been created for the first time and tested in a supersonic jet, allowing simultaneous measurements of velocities along multiple profiles in a flow. Secondly, two different approaches have been demonstrated for generating dotted FLEET lines. One employs a slit mask pattern focused into points to yield a dotted line, allowing for two- or three-component velocity measurements free of contamination between components. The other dotted-line approach is based upon an optical wedge array and yields a grid of points rather than a dotted line. Two successful FLEET measurement campaigns have been conducted in SNL’s HWT. The first effort established optimal diagnostic configurations in the hypersonic environment based on earlier benchtop reproductions, including validation of the use of a 267 nm beam to boost the measurement signal-to-noise ratio (SNR) with minimal risk of perturbing the flow and greater simplicity than a comparable resonant technique at 202 nm. The same FLEET system subsequently was reconstituted to demonstrate the ability to make velocimetry measurements of hypersonic turbulence in a realistic flow field. Mean velocity profiles and turbulence intensity profiles of the shear layer in the wake of a hypersonic cone model were measured at several different downstream stations, proving the viability of FLEET as a hypersonic diagnostic.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2024

Self-assembled reconfigurable pump architectures via magnetic colloidal swarms

Self-assembled swarms of interactive active units, which are adaptive and dynamically reconfigurable to accommodate different functionalities, represent a promising platform for the development of next-generation robotics. Here, we utilize the emergent collective behavior of active magnetic colloids confined in quasi-two-dimensional arrays of overlapping wells to demonstrate the self-organization of a colloidal swarm into a dynamic pump architecture capable of controlled transport of passive cargo particles. This dynamic architecture provides a global unidirectional looping flow pattern along the entire length of the system. We show that the flow direction of the dynamic swarm-based pump can be externally controlled by a phase shift of a driving magnetic field energizing the swarm. The experimental observations are supported by computational modeling based on phenomenological coarse-grained particle dynamics coupled to shallow-water Navier-Stokes hydrodynamics. In conclusion, our findings demonstrate how the emergent collective behavior of a swarm can be orchestrated into a desired functionality by exploiting the interplay between activity and confinement potentials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Quantum simulations of SO(5) many-fermion systems using qudits

The structure and dynamics of many-body systems are the result of a delicate interplay between underlying interactions. Fermionic pairing, for example, plays a central role in various physical systems, ranging from condensed matter to nuclear systems, where it can lead to collective phenomena such as superconductivity and superfluidity. In atomic nuclei, the interplay between pairing and particle-hole interactions leads to a high degree of complexity and intricate entanglement structures. Despite this apparent complexity, symmetries emerge and manifest themselves in observable regular patterns. These symmetries and their breakings have long been used to determine relevant degrees of freedom and simplify classical descriptions of many-body systems. Here, this work explores the potential utility of quantum computers with arrays of qudits in simulating interacting fermionic systems, when the qudits can naturally map the relevant degrees of freedom determined by an underlying symmetry group. The Agassi model of fermions interacting via particle-hole and pairing interactions is based on an underlying so(5) algebra. Such systems can intuitively be partitioned into pairs of modes with five basis states, which thus naturally map to arrays of d = 5 qudits (qu5its). Classical noiseless simulations of the time evolution of systems with up to twelve qu5its are performed, by implementing quantum circuits that are developed herein, using PYTHON codes invoking Google's CIRQ software. The resource requirements of the qu5it circuits are analyzed and compared with two different mappings to qubit systems: a physics-aware Jordan-Wigner mapping requiring four qubits per mode pair and a state-to-state mapping requiring three qubits per mode pair. While the dimensionality of Hilbert spaces in mappings to qu5it systems are less than those for the corresponding qubit systems, the number of entangling operations, depending on the available hardware, can either be greater or smaller than for the physics-aware Jordan-Wigner mapping. The state-to-state mapping, while having a smaller Hilbert space than Jordan-Wigner mappings, appears to be the least efficient in gate counts. Further, a previously unknown sign problem has been identified from Trotterization errors in time evolving high-energy excitations. There appear to be advantages in employing quantum computers with arrays of qudits to perform simulations of many-body dynamics that exploit the role of underlying symmetries, specifically in lowering the required quantum resources and in reducing anticipated errors that take the simulation out of the physical space. If the necessary entangling gates are not directly supported by the hardware, physics-aware mappings to qubits may, however, be advantageous for other aspects.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

System and method for thermal emission control using segmented array

The present disclosure relates to a thermal emissivity control system. The system may have a segmented array that makes use of a thermally conductive base layer configured to be connectable to an external heat generating subsystem, with the base layer including a thermally emissive surface. The array may also have a plurality of actuation elements at least one of positioned on or adjacent to the thermally emissive surface. A plurality of movable shutter elements is disposed adjacent one another in a grid pattern, and controlled in movement by the actuation elements to create gaps of controllably varying dimension therebetween. The shutter elements control at least one of a magnitude of, or direction of, thermal radiation through the gaps.

Panas, Robert Matthew↗
DOE OSTI2026

Shell structure in 32P

The nuclear structure of 32P was investigated by detecting multi-γ coincidences along with charged light ions following the bombardment of an 18O target with a 30-MeV 16O beam from the Florida State University accelerator facility using the Clarion2-Trinity array of Clover γ spectrometers and GAGG (Gd-Al-Ga-garnet) scintillators for charged particles. A number of new states up to 12 MeV excitation and spins up to 9+ were observed by their γ decay patterns. Spins and parities were assigned by comparing measured γ angular distributions with polarizations inferred from Compton-scattering asymmetries between the Ge crystals in the Clover spectrometers. The new level scheme of 32P compares well with shell model calculations using the FSU cross-shell interaction and reasonably well with those using the sdpf-m interaction. In particular, structures with higher spin arise from promotion of more nucleons up to the f-p shell.

Allmond, James [ORNL] (ORCID:0000000165338721)↗
DOE OSTI2020

Josephson behavior in a metal-decorated topological-insulator Bi 0.91 Sb 0.09

We have fabricated W nanoscale clusters on a topological insulator Bi 0.91 Sb 0.09 . The W island arrays effectively induce two-dimensional superconductivity at the surface of Bi 0.91 Sb 0.09 via the superconducting proximity effect. We find that this heterostructure behaves as a dynamic Josephson junction, which shows a Fraunhofer-like pattern of the critical current versus the applied magnetic field. Microwave irradiation experiments reveal the existence of a 4π-periodic supercurrent carried by the topological surface state. Our results open up a route to induce topological superconductivity in a topological insulator.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Imaging plant metabolism in situ

Abstract Mass spectrometry imaging (MSI) has emerged as an invaluable analytical technique for investigating the spatial distribution of molecules within biological systems. In the realm of plant science, MSI is increasingly employed to explore metabolic processes across a wide array of plant tissues, including those in leaves, fruits, stems, roots, and seeds, spanning various plant systems such as model species, staple and energy crops, and medicinal plants. By generating spatial maps of metabolites, MSI has elucidated the distribution patterns of diverse metabolites and phytochemicals, encompassing lipids, carbohydrates, amino acids, organic acids, phenolics, terpenes, alkaloids, vitamins, pigments, and others, thereby providing insights into their metabolic pathways and functional roles. In this review, we present recent MSI studies that demonstrate the advances made in visualizing the plant spatial metabolome. Moreover, we emphasize the technical progress that enhances the identification and interpretation of spatial metabolite maps. Within a mere decade since the inception of plant MSI studies, this robust technology is poised to continue as a vital tool for tackling complex challenges in plant metabolism.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗