Search NASA⌕ Search

SEARCH · Search NASA

Results for “phase field method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Multi-Scale Modeling of Swelling in Accident-Tolerant U 3 Si 2 Fuel

U 3 Si 2 is a promising candidate for use as an accident-tolerant fuel for light water reactors. A multi-scale computational approach was used to calculate swelling in pellet-form U 3 Si 2 fuel. Swelling was assumed to be equal to the volume fraction of fission gas bubbles in the fuel, and the evolution of bubble volume fraction was determined from phase-field simulations. To parameterize the phase-field model, density-functional theory and molecular dynamics simulations were performed. To enable molecular dynamics simulations, a new interatomic potential for the U-Si system was developed based on the modified embedded atom method. A new phase-field model based on a grand-potential functional was also developed. The model is applicable to both intergranular and intragranular bubbles. To calculate the volume fraction of bubbles, the microstructure was decomposed into regions consisting of only intragranular or intergranular bubbles based on a truncated octahedral grain structure, and growth of the bubbles in the two regions was simulated separately. The total swelling was then calculated based on a a weighted average of bubble volume fraction in the two regions. Total swelling was of the same order of magnitude, but larger than that predicted by the existing empirical swelling model used in BISON and a rate-theory based model. Limitations of the present approach and suggestions for improvement are presented.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Phase retrieval using radiation and matter-wave fields: Validity of Teague's method for solution of the transport-of-intensity equation

Although originally developed for coherent paraxial scalar electromagnetic radiation in the visible-light regime, phase retrieval using the transport-of-intensity equation has been successfully applied to a range of paraxial radiation and matter-wave fields. Such applications include using electron wave fields to quantitatively image magnetic skyrmions and spin ices, propagation-based phase-contrast imaging using cold neutrons and hard x-rays, and visible-light refractive imaging of the projected column density of cold-atom clouds. Teague's method for phase retrieval using the transport-of-intensity equation, which renders the phase of a paraxial complex wave indirectly measurable via the existence of a conserved current, has been applied to a broad variety of situations which include all of the experiments described above. However, these applications have been undertaken without a thorough analysis of the underlying validity of the method. Here we derive sufficient conditions for the phase-retrieval solution provided by Teague's method to coincide with the true phase of the paraxial radiation or matter-wave field. We also present a sufficient condition guaranteeing that the discrepancy between the true phase function and that reconstructed using Teague's solution is small. These conditions demonstrate that, in most practical cases, for phase-amplitude retrieval using the transport-of-intensity equation, the Teague solution is very close to the exact solution. However, we also describe a counter example in the context of phase-amplitude retrieval using hard x-rays, in which the relative root-mean-square difference between the exact solution and that obtained using Teague's method is 9%. These findings clarify the foundations of one of the most widely applied methods for propagation-based phase retrieval of both paraxial matter and radiation wave fields and define a region for its applicability.

74 ATOMIC AND MOLECULAR PHYSICS↗

An adaptive time-stepping strategy for solving the phase field crystal model

In this work, we will propose an adaptive time step method for simulating the dynamics of the phase field crystal (PFC) model. The numerical simulation of the PFC model needs long time to reach steady state, and then large time-stepping method is necessary. Unconditionally energy stable schemes are used to solve the PFC model. The time steps are adaptively determined based on the time derivative of the corresponding energy. It is found that the use of the proposed time step adaptivity cannot only resolve the steady state solution, but also the dynamical development of the solution efficiently and accurately. The numerical experiments demonstrate that the CPU time is significantly saved for long time simulations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hyperelastic phase-field fracture mechanics modeling of the toughening induced by Bouligand structures in natural materials

Bouligand structures are widely observed in natural materials; elasmoid fish scales and the exoskeleton of arthropods, such as lobsters, crabs, mantis shrimp and insects, are prime examples. In fish scales, such as those of the Arapaima gigas, the tough inner core beneath the harder surface of the scale displays a Bouligand structure comprising a layered arrangement of collagen fibrils with an orthogonal or twisted staircase (or plywood) architecture. A much rarer variation of this structure, the double-twisted Bouligand structure, has been discovered in the primitive elasmoid scales of the coelacanth fish; this architecture is quite distinct from “modern” elasmoid fish scales yet provides extraordinary resistance to deformation and fracture. Here we examine the toughening mechanisms created by the double-twisted Bouligand structure in comparison to those generated by the more common single Bouligand structures. Specifically, we have developed an orientation-dependent, hyperelastic, phase-field fracture mechanics method to computationally examine the relative fracture toughness of elasmoid fish scales comprising single vs. double-twisted Bouligand structures of fibrils. The model demonstrates the critical role played by the extra inter-bundle fibrils found in coelacanth fish scales in enhancing the toughness of Bouligand-type structures. Synthesis and fracture tests of 3-D printed Bouligand-type materials are presented to support the modeling and complement our understanding of the fracture mechanisms in Bouligand-type structures.

3-D printing↗

First-Principles Study of Surface Properties of U{sub 3}Si{sub 2} for Accident Tolerant Fuel

Due to the high thermal conductivity and uranium density compared to UO{sub 2} fuel used in current Light Water Reactors (LWRs), U-Si fuels, such as the U{sub 3}Si{sub 2} and U{sub 3}Si{sub 5} compounds, are currently under investigation for the development of accident tolerant fuels (ATF) in response to the Fukushima Daiichi accident in Japan. In order to perform meaningful mesoscale and macroscale fuel performance simulations, fundamental material properties of nuclear fuels should be known. One example is the simulations of fission gas bubble evolution and gas bubble-induced swelling in nuclear fuels using mesoscale methods, such as phase field and rate theory. To properly describe the gas bubble behavior in the fuel, it is crucial to know the surface energies of the fuel. Unfortunately, there is no study of the surface properties of U{sub 3}Si{sub 2} from both experiment and theory. To this end, we systematically investigate the surface properties of U{sub 3}Si{sub 2} using density functional theory (DFT) based first-principles calculations. Of several low index facets, we studied the (001) and (100) surfaces of tetragonal U{sub 3}Si{sub 2} with all the possible terminations. Since all the studied surfaces are not stoichiometric, we also investigated the effect of elemental chemical potentials on the formation of surface. We systematically investigate the surface properties of U{sub 3}Si{sub 2} using density functional theory calculations. Of several low-index facets, the (001) and (100) surfaces show similar averaged surface energies calculated using even number of layers. At the high Si chemical potential, the Si-terminated U{sub 3}Si{sub 2}(100) and U{sub 3}Si{sub 2}(001) surfaces show lower energies than those of the U-terminated surfaces, with U,Si-terminated U{sub 3}Si{sub 2}(001) as the most stable surface. The surface energies of all non-stoichiometric U{sub 3}Si{sub 2} are linearly dependent on the Si chemical potential. The surface energies of U-terminated surfaces decrease as Si potential decreases. The U{sub 2}-terminated U{sub 3}Si{sub 2}(100) surface becomes that the most stable surface at U-rich side. Based on the current results, an averaged surface energy of U{sub 3}Si{sub 2}, i.e., 1.45 J/m{sup 2}, is recommended for the description of the rounded facets of gas bubbles in U{sub 3}Si{sub 2} by mesoscale simulations. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

CASM — A software package for first-principles based study of multicomponent crystalline solids

CASM is a software package that enables first-principles based studies of crystalline materials. It has been designed to treat coupled chemical, mechanical, vibrational, and magnetic degrees of freedom to determine ground state and finite temperature properties of crystals. The symmetry of the underlying parent crystal structure is used to enumerate perturbations of the parent crystal structure and generate derivative structures which can be input to first-principles calculations in order to explore the ground state energy landscape. CASM algorithmically constructs cluster expansions that fully couple discrete and continuous degrees of freedom, and generates highly efficient code to evaluate the cluster expansion basis functions. Widely used machine learning methods are integrated for fitting expansion coefficients to first-principle calculations. The fully parameterized cluster expansions can be combined with (kinetic) Monte Carlo methods to calculate finite temperature thermodynamic and kinetic properties. CASM Alloy Manager identifies distinct parent crystal structures in an alloy system, creating individual projects for each, and integrating the results. The integrated infrastructure facilitates the linkage between first-principles statistical mechanics predictions with higher length scale computational methods, such as phase field simulations. In conclusion, CASM projects are designed to be easy to share in repositories, to re-use, and to extend to include additional chemical species or types of degrees of freedom.

36 MATERIALS SCIENCE↗

Phase-field-crystal study of grain boundary premelting and shearing in bcc iron

Here, we use the phase-field-crystal (PFC) method to investigate the equilibrium premelting and nonequilibrium shearing behaviors of [001] symmetric tilt grain boundaries (GBs) at high homologous temperature over the complete range of misorientation 0 < θ < 90° in classical models of bcc Fe. We characterize the dependence of the premelted layer width W as a function of temperature and misorientation. In addition, we compute the thermodynamic disjoining potential whose derivative with respect to W represents the structural force between crystal-melt interfaces due to the spatial overlap of density waves. The disjoining potential is also computed by molecular dynamics (MD) simulations, for quantitative comparison with PFC simulations, and coarse-grained amplitude equations (AE) derived from PFC that provide additional analytical insights. We find that, for GBs over an intermediate range of misorientation (θ min < θ < θ max ), W diverges as the melting temperature is approached from below, corresponding to a purely repulsive disjoining potential, while for GBs outside this range (θ < θ min or θ max < θ < 90°) W remains finite at the melting point. In the latter case, W corresponds to a shallow attractive minimum of the disjoining potential. The misorientation range where W diverges predicted by PFC simulations is much smaller than the range predicted by MD simulations when the small dimensionless parameter ε of the PFC model is matched to liquid structure factor properties. However, it agrees well with MD simulations with a lower ε value chosen to match the ratio of bulk modulus and solid-liquid interfacial free energy, consistent with the amplitude-equation prediction that θ min and 90° – θ max scale as ~ ε 1/2 . The incorporation of thermal fluctuations in PFC is found to have a negligible effect on this range. In response to a shear stress parallel to the GB plane, GBs in PFC simulations exhibit coupled motion normal to this plane or sliding. Furthermore, the coupling factor exhibits a discontinuous change as a function of θ that reflects a transition between two coupling modes.

36 MATERIALS SCIENCE↗

Light-activated Gigahertz Ferroelectric Domain Dynamics

Using time- and spatially-resolved hard X-ray diffraction microscopy, the striking structural and electrical dynamics upon optical excitation of a single crystal of BaTiO 3 are simultaneously captured on sub-nanoseconds and nanoscale within individual ferroelectric domains and across walls. A large emergent photo-induced electric field of up to 20 million volts per meter is discovered in a surface layer of the crystal, which then drives polarization and lattice dynamics that are dramatically distinct in a surface layer versus bulk regions. A dynamical phase-field modeling (DPFM) method is developed that reveals the microscopic origin of these dynamics, leading to GHz polarization and elastic waves travelling in the crystal with sonic speeds and spatially varying frequencies. The advance of spatiotemporal imaging and dynamical modeling tools open opportunities of disentangling ultrafast processes in complex mesoscale structures such as ferroelectric domains

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Separate-Effects Validation Experiments for Models of Fracture in Ceramic Nuclear Fuel

A number of advances have recently been made in modeling fracture initiation and propagation in ceramic light water reactor (LWR) fuel. These include the use of techniques such as peridynamics, the extended finite element method (XFEM), the discrete element method (DEM), and phase field fracture. Improved predictions of fracture in LWR fuel can benefit fuel performance simulations in a number of ways, with important implications for radial relocation, pellet-cladding mechanical interactions, and fragmentation during accident conditions. Although these modeling approaches appear promising, to-date most of their applications have been to fresh fuel. A major limitation in applying these approaches with confidence to a wider variety of conditions, such as fragmentation of high-burnup fuel, is that there is very limited data that can be directly used to validate the results of these fracture models. While fracture patterns are available from cross-sections of numerous irradiated fuel rods, the fuel rods have typically been subjected to complex irradiation histories. To validate models of fracture propagation, focused experiments that give snapshots of the initiation and propagation of fracture under well characterized prototypical reactor conditions are needed. Under a multi-institutional U.S. Department of Energy Integrated Research Project (IRP), three separate-effects validation experiments are underway to provide information on the propagation of cracks in LWR fuel under controlled conditions. The primary challenge in developing such an experiment is in providing conditions that result in a radial temperature distribution that is prototypical of LWR in-reactor conditions. Two out-of-reactor experiments are being planned that employ very different approaches to achieve such a temperature distribution. The first of these achieves this by employing a combination of inductive and resistive electrical heating to generate volumetric heating. The second experiment involves slowly heating a pellet in a metal rod to a high temperature, and then quenching that rod in a cold bath. The quenching process generates a temperature profile approximating that in an LWR fuel rod for a moment, but has a very different temperature history from the LWR. Finally, an experiment is being planned for the Idaho National Laboratory TREAT reactor that will use nuclear fission as a heat source, and which will employ a metal heat sink to replicate the thermal conditions provided by coolant in an LWR. These experiments all have their advantages and drawbacks, with varying levels of ability to reproduce actual LWR conditions and varying ability to use instruments to monitor quantities of interest over the course of the experiment that can be used to validate fracture models. For that reason, these different experimental approaches are complimentary to each other, and the combined results are expected to significantly improve confidence in the ability of computational models to simulate fracture in ceramic nuclear fuel.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Local bias-induced phase transitions

Electrical bias-induced phase transitions underpin a wide range of applications from data storage to energy generation and conversion. The mechanisms behind these transitions are often quite complex and in many cases are extremely sensitive to local defects that act as centers for local transformations or pinning. Furthermore, using ferroelectrics as an example, we review methods for probing bias-induced phase transitions and discuss the current limitations and challenges for extending the methods to field-induced phase transitions and electrochemical reactions in energy storage, biological and molecular systems.

36 MATERIALS SCIENCE↗

Phase-field modeling of the beta to omega phase transformation in Zr–Nb alloys

A three-dimensional elastoplastic phase-field model is developed, using the Finite Element Method (FEM), for modeling the athermal beta to omega phase transformation in Zr–Nb alloys by including plastic deformation and strain hardening of the material. The microstructure evolution during athermal transformation as well as under different stress states, e.g. uni-axial tensile and compressive, bi-axial tensile and compressive, shear and tri-axial loadings, is studied. The effects of plasticity, stress states and the stress loading direction on the microstructure evolution as well as on the mechanical properties are studied. The input data corresponding to a Zr – 8 at.% Nb alloy are acquired from experimental studies as well as by using the CALPHAD method. Our simulations show that the four different omega variants grow as ellipsoidal shaped particles. Our results show that due to stress relaxation, the athermal phase transformation occurs slightly more readily in the presence of plasticity compared to that in its absence. The evolution of omega phase is different under different stress states, which leads to the differences in the mechanical properties of the material. The variant selection mechanism, i.e. formation of different variants under different stress loading directions, is also nicely captured by our model.

36 MATERIALS SCIENCE↗

A Phase-Field Model for Phase Transformations in Glass-Forming Alloys

A phase-field model is proposed for phase transformations in glass-forming alloys. The glass transition is introduced as a structural relaxation, and the competition between the glass and crystalline phases is investigated. The simulations are performed for Cu-Zr alloys, employing thermodynamic and kinetic parameters derived from reported thermodynamic modeling and molecular dynamics simulation results,[1–3] respectively. Four distinct phase fields are treated with a multi-phase-field approach, representing the liquid/glass, Cu10Zr7, CuZr, and CuZr2 phases. In addition, a continuum-field method is applied to the liquid to accommodate the liquid–glass transformation. The combined phase-field approach is used to investigate the glass formation tendency, and critical cooling rates are estimated and compared with the reported experimental values.

36 MATERIALS SCIENCE↗

An Object-Oriented Finite Element Framework for Multiphysics Phase Field Simulations

The phase field approach is a powerful and popular method for modeling microstructure evolution. In this work, advanced numerical tools are used to create a phase field framework that facilitates rapid model development. This framework, called MARMOT, is based on Idaho National Laboratory's finite element Multiphysics Object-Oriented Simulation Environment. In MARMOT, the system of phase field partial differential equations (PDEs) are solved simultaneously with PDEs describing additional physics, such as solid mechanics and heat conduction, using the Jacobian-Free Newton Krylov Method. An object-oriented architecture is created by taking advantage of commonalities in phase fields models to facilitate development of new models with very little written code. In addition, MARMOT provides access to mesh and time step adaptivity, reducing the cost for performing simulations with large disparities in both spatial and temporal scales. In this work, phase separation simulations are used to show the numerical performance of MARMOT. Deformation-induced grain growth and void growth simulations are included to demonstrate the muliphysics capability.

36 MATERIALS SCIENCE↗

Comparative modeling of the disregistry and Peierls stress for dissociated edge and screw dislocations in Al

Many elementary deformation processes in metals involve the motion of dislocations. The planes of glide and specific processes dislocations prefer depend heavily on their atomic core structures. Atomistic simulations are desirable for dislocation modeling but their application to even sub-micron scale problems is in general computationally costly. Accordingly, continuum-based approaches, such as the phase-field microelasticity, phase-field dislocation dynamics (PFDD), generalized Peierls–Nabarro (GPN) models, and the concurrent atomistic–continuum (CAC) method, have attracted increasing attention in the field of dislocation modeling because they well represent both short-range cores interactions and long-range stress fields of dislocations. To better understand their similarities and differences, it is useful to compare these methods in the context of benchmark simulations and predictions. In this paper, we apply the CAC method and different PFDD variants – one of them is equivalent to a GPN model – to simulate an extended (i.e., dissociated) dislocation in Al with initially pure edge or pure screw character in terms of the disregistry. CAC and discrete forms of PFDD are also employed to calculate the Peierls stress. By conducting comprehensive convergence studies, we quantify the dependence of these measures on time/grid resolution and simulation cell size. Several important but often overlooked differences between PFDD/GPN variants are clarified. In conclusion, our work sheds light on the advantages and limitations of each method, as well as the path towards enabling them to effectively model complex dislocation processes at larger length scales.

36 MATERIALS SCIENCE↗

Study of high altitude plume impingement

The radiation intensities are determined in the base region of the space shuttle due to solid particle radiation emanating from the solid rocket motors of the shuttle. Results of an analysis of the Titan 3 and simulated solid rocket motor radiation intensities are presented. The gas particle flow fields of the Titan 3 nozzle and plume and a space shuttle solid rocket motor nozzle and plume are described. The gaseous Titan 3 flow fields are discussed utilizing the results of flow fields generated by a gaseous and two phase method-of-characteristics computer programs. A two phase computer flow field analysis program was developed. An outflow correction theory is developed which will be used to modify existing convection heat transfer methods for better heat transfer predictions on bodies immersed in rocket exhaust plumes.

Mcanally, J. V.↗