Search NASA⌕ Search

SEARCH · Search NASA

Results for “plasma sheaths”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Observations of interplanetary plasma waves, spacecraft noise, and sheath phenomena on Imp 7

The Imp 7 plasma wave instrument measures electric and magnetic wave components of plasma oscillations over the frequency range from 10 Hz to 100 kHz. The instrumentation and relevant external characteristics of the spacecraft that appear to be responsible for some in-flight disturbance effects are briefly described. It is shown that as each one of the 16 solar panel flats rotates into shadow or sunlight, the array transients produce fluctuating magnetic fields that are detected on the magnetic loop mounted 3.4 m from the spacecraft. These transients occur 16 times per spin period, and the corresponding magnetic noise has a high frequency on the rapidly spinning Imp 7 spacecraft. The analysis suggests that some Imp magnetic threshold levels measured 3-4 m from the spacecraft are determined by the solar array current transient effects associated with the discrete 16-sided geometry of the spacecraft. The geometry also influences the response of the electric dipole antenna by modulating the sheath.

Scarf, F. L.↗
NASA NTRS1974

Report of the Plasma Physics and Environmental Perturbation Laboratory (PPEPL) working groups. Volume 1: Plasma probes, wakes, and sheaths working group

It is shown in this report that comprehensive in-situ study of all aspects of the entire zone disturbance caused by a body in a flowing plasma resulted in a large number if requirements on the shuttle-PPEPL facility. A large amount of necessary in-situ observation can be obtained by adopting appropriate modes of performing the experiments. Requirements are indicated for worthwhile studies, of some aspects of the problems, which can be carried out effectively while imposing relatively few constraints on the early missions. Considerations for the desired growth and improvement of the PPEPL to facilitate more complete studies in later missions are also discussed. For Vol. 2, see N74-28170; for Vol# 3, see N74-28171.

Source record↗
NASA NTRS1993

Stability of the Halley Cometo-Sheath with Resistivity and Plasma Motion

The MHD stability of the cometary inner shealth determined by the balance between the inward Lorentz body force and the outward ion-neutral drag force is investigated by numerically solving the wave equations which include resistivity, plasma motion and plasma pressure with the help of two-point boundary value method.

Comets Cometosheath MHD Stability↗
NASA NTRS2009

Non-ambipolar radio-frequency plasma electron source and systems and methods for generating electron beams

An electron generating device extracts electrons, through an electron sheath, from plasma produced using RF fields. The electron sheath is located near a grounded ring at one end of a negatively biased conducting surface, which is normally a cylinder. Extracted electrons pass through the grounded ring in the presence of a steady state axial magnetic field. Sufficiently large magnetic fields and/or RF power into the plasma allow for helicon plasma generation. The ion loss area is sufficiently large compared to the electron loss area to allow for total non-ambipolar extraction of all electrons leaving the plasma. Voids in the negatively-biased conducting surface allow the time-varying magnetic fields provided by the antenna to inductively couple to the plasma within the conducting surface. The conducting surface acts as a Faraday shield, which reduces any time-varying electric fields from entering the conductive surface, i.e. blocks capacitive coupling between the antenna and the plasma.

Hershkowitz, Noah↗
NASA NTRS2011

Non-ambipolar radio-frequency plasma electron source and systems and methods for generating electron beams

An electron generating device extracts electrons, through an electron sheath, from plasma produced using RF fields. The electron sheath is located near a grounded ring at one end of a negatively biased conducting surface, which is normally a cylinder. Extracted electrons pass through the grounded ring in the presence of a steady state axial magnetic field. Sufficiently large magnetic fields and/or RF power into the plasma allow for helicon plasma generation. The ion loss area is sufficiently large compared to the electron loss area to allow for total non-ambipolar extraction of all electrons leaving the plasma. Voids in the negatively-biased conducting surface allow the time-varying magnetic fields provided by the antenna to inductively couple to the plasma within the conducting surface. The conducting surface acts as a Faraday shield, which reduces any time-varying electric fields from entering the conductive surface, i.e. blocks capacitive coupling between the antenna and the plasma.

Hershkowitz, Noah↗
NASA NTRS1972

RF sheath and admittance characteristics of a spherical plasma probe.

Development of a radio-frequency sheath model for a spherical probe in a collisionless plasma. The method of solution is based on the quasi-static approximation and the electrostatic probe theory of Bernstein and Rabinowitz (1959). The resistive part of the admittance is ascribed to the sheath transit-time collisionless dissipation mechanism suggested by Mayer (1963) and developed by Gould (1964). Expressions are obtained for the effective sheath thickness and the equivalent resistance of the transit-time dissipation. The sheath model and, hence, the admittance are completely determined in terms of the bias potential, the probe radius, the plasma frequency, and the Debye length - i.e., there are no adjustable parameters in the proposed theory which are to be determined by experiment. The results obtained agree favorably with Cohen and Bekefi's (1971) experimental data on the conductance resonant frequency and the width of the conductance peak.

Kan, J. R.↗
NASA NTRS1975

Sheath-limited unipolar induction in the solar wind

A model of the steady-state interaction between the solar wind and an electrically conducting body having neither an atmosphere nor an intrinsic magnetic field sufficient enough to deflect the plasma flow is presented which considers some effects of a plasma surface sheath on unipolar induction. The Sonett-Colburn (1967, 1968) unipolar dynamo model is reviewed, and it is noted that the unipolar dynamo response of an electrically conducting body in the solar wind's motional field can be controlled by sheath effects in certain cases where the body radius is less than a certain critical value. It is shown that sheath effects do not limit the unipolar response of the moon or Mercury since their body radii are much larger than their critical radii. Sheath effects are also considered for asteroids, the Martian satellites, the irregular Jovian satellites, the outer satellites of Saturn, and meteorite parent bodies in a primordial enhanced solar wind.

Srnka, L. J.↗
NASA NTRS1983

Accretion onto magnetized neutron stars - X-ray pulsars with intermediate rotation rates

Assuming that the accreting material originates in a wind or envelope and therefore carried no net angular momentum, the Kevin-Helmholtz instability is applied to the transport of accreting plasma across the magnetopause of a rotating and magnetized neutron star for the case in which this surface is interchange-stable. Magnetopause location is determined, and the blackbody emission temperature is estimated. A possible period-dependence is noted in the X-ray temperature data which is in approximate agreement with the present model calculations. The magnetopause is found to be insufficiently stable to support an optically thick sheath of plasma surrounding the source, so that neither shrouding of the X-ray source nor significant reprocessing of the radiation field is possible in the model presented. It is concluded that while the flow structure at the magnetopause can control accretion column geometry, the emerging pulse profile and spectra are only indirectly altered, through a dynamical influence on emission region geometry.

Burnard, D. J.↗
NASA NTRS2010

Magnetic Shielding of the Acceleration Channel Walls in a Long-Life Hall Thruster

In a Qualification Life Test (QLT) of the BPT-4000 Hall thruster that recently accumulated greater than 10,000 h it was found that the erosion of the acceleration channel practically stopped after approximately 5,600 h. Numerical simulations of this thruster using a 2-D axisymmetric, magnetic field-aligned-mesh (MFAM) plasma solver reveal that the process that led to this significant reduction of the erosion was multifaceted. It is found that when the channel receded from its early-in-life geometry to its steady-state configuration several changes in the near-wall plasma and sheath were induced by the magnetic field that, collectively, constituted an effective shielding of the walls from any significant ion bombardment. Because all such changes in the behavior of the ionized gas near the eroding surfaces were caused by the topology of the magnetic field there, we term this process "magnetic shielding."

life modeling↗