Search NASA⌕ Search

SEARCH · Search NASA

Results for “power flight”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Orbiter aborts from boost: Presimulation report

A description of a hybrid simulation of the 040C orbiter aborting from boost to specified landing site is provided. The simulation starts when the abort is initiated and continues until a terminal energy state (associated with the selected landing site) is reached. At abort it is assumed that all SRM's are jettisoned with the external tank remaining with the orbiter. The simulation described has six degrees of freedom with the vehicle simulated as a rigid body. A conventional form of autopilot is provided to control engine gimbaling during powered flight. An ideal form of an autopilot is provided to test conventional autopilot function and provide pseudo RCS function during coasting flight. The simulation is proposed to provide means for studies of abort guidance function and to gain information concerning ability to control the abort trajectory.

Backman, H. D.↗
NASA NTRS1972

Dynamic characteristics of a two-stage variable-mass flexible missile with internal flow

A general formulation of the dynamical problems associated with powered flight of a two stage flexible, variable-mass missile with internal flow, discrete masses, and aerodynamic forces is presented. The formulation comprises six ordinary differential equations for the rigid body motion, 3n ordinary differential equations for the n discrete masses and three partial differential equations with the appropriate boundary conditions for the elastic motion. This set of equations is modified to represent a single stage flexible, variable-mass missile with internal flow and aerodynamic forces. The rigid-body motion consists then of three translations and three rotations, whereas the elastic motion is defined by one longitudinal and two flexural displacements, the latter about two orthogonal transverse axes. The differential equations are nonlinear and, in addition, they possess time-dependent coefficients due to the mass variation.

Meirovitch, L.↗
NASA NTRS1972

Flexible wings for transportation.

The possible uses of flexible wings for transportation of passengers and cargo from point to point on earth are discussed along with emergency applications of flexible wings in connection with conventional aircraft. Topics considered include gliding and soaring as a sport, towing of flexible-wing gliders for cargo delivery, powered flight with small aircraft having folding flexible wings, aerial dropping of personnel and cargo on flexible wings instead of parachutes, landing and recovery of rocket payloads by means of flexible wings, and use of flexible wings with ejection seats and as an emergency landing system for conventional aircraft.

Rogallo, F. M.↗
NASA NTRS1973

Longitudinal oscillation of launch vehicles

During powered flight a vehicle may develop longitudinal self-excited oscillations, so-called oscillations, of its structure. The energy supplying the vibration is tapped from the thrust by the activity of the system itself; that is, oscillation of the structure causes oscillation of the propellant system, especially of the pumps. In this way an oscillating thrust can be created that, by a feedback loop, may sustain the structural oscillation under certain circumstances. Two special features of the system proved to be essential for creation of instability. One is the effect of the inherent time interval that the thrust oscillation is lagging behind the structural oscillation. The other is the decreased of system mass caused by the exhausting of gas. The latter feature may cause an initially stable system to become unstable. To examine the stability of the system, a single mass-spring model, which is the result of a one-term Galerkin approach to the equation of motion, has been considered. The Nyquist stability criterion leads to a stability graph that shows the stability conditions in terms of the system parameter and also demonstrates the significance of time lag, feedback magnitude, and loss of mass. An important conclusion can be drawn from the analysis: large relative displacements of the pump-engine masses favor instability. This is also confirmed by flight measurements.

Glaser, R. F.↗
NASA NTRS1973

Rendezvous targeting

Revisions to be included in 'Space Shuttle Guidance, Navigation and Control Design Equations' are reported. Technical changes include: (1) a plane change maneuver was incorporated in the program's logic; (2) in the search for an apsidal crossing, program checks were included to update through intervals of pi in the case of near circular orbits or close proximity to an apsidal point; (3) following an astronaut overwrite of a Lambert maneuver, the state vector was updated to establish a new target vector for use in the powered flight routine; and (4) following the computation of each maneuver, the position vector of the primary vehicle was offset - to help compensate for the effects of the finite maneuver - prior to the update of the state vector to the next maneuver point. Input and output variables, detailed flow diagrams a functional flow diagram, and a description of equations are presented.

Tempelman, W. H.↗
NASA NTRS1973

Analysis of axisymmetrical vibration of a partially liquid-filled elastic sphere by the method of Green's function

The longitudinal dynamic behavior of launch vehicles is largely determined by their huge liquid propellant masses which are spring supported by the elastic tank walls. Throughout much of the powered flight time, these masses constitute a high percentage of the entire vehicle mass and, therefore, may dominate the fundamental modes of the vehicle. In this report, a spherical container is considered. The analysis is based on a Galerkin approach, in the course of which a second-order differential equation must be solved. The solution has been obtained by the method of Green's function. This method is favorable because it displays the manner in which the analysis can be extended to partially liquid-filled general shells of revolution. The computer programs currently available for partially liquid-filled propellant tanks are based on the finite element methods and result in analytical models having as many as several hundred degrees of freedom. The method applied in this report results in a model having less than 10 degrees of freedom as can be shown by numerical evaluation. Therefore, it will be possible to analyze propellant tanks using much less computer time with comparable accuracy.

Glaser, R. F.↗
NASA NTRS1974

Asymmetrical booster ascent guidance and control system design study. Volume 1: Summary

Dynamics and control, stability, and guidance analyses are summarized for the asymmetrical booster ascent guidance and control system design studies, performed in conjunction with space shuttle planning. The mathematical models developed for use in rigid body and flexible body versions of the NASA JSC space shuttle functional simulator are briefly discussed, along with information on the following: (1) space shuttle stability analysis using equations of motion for both pitch and lateral axes; (2) the computer program used to obtain stability margin; and (3) the guidance equations developed for the space shuttle powered flight phases.

Williams, F. E.↗
NASA NTRS1974

Skylab 1 and 2 - Pilots' report

Details of powered flight are considered, giving attention to the lift-off, engine thrust, and separation from the S-1VB stage. The rendezvous checklist was performed on time and exactly prior to the first phasing maneuver. The Command Service Module was finally maneuvered to a position for hard docking. Attention is given to aspects of extravehicular activity during the mission and delays experienced in the separation procedure.

Charles Conrad, Jr.↗
NASA NTRS1973

Automatic control in planetary exploration in the 1980s

Based on an examination of the planetary missions in the 1980s and their related objectives, a broad assessment of the automatic control capabilities required for these missions is presented. The ten outer-planet, terrestrial-planet, and small-body missions considered involve various operations encompassing a complex series of modes including cruise, maneuver, and powered flight control. In addition to routine navigation and attitude control, onboard control is required to point scientific instruments and antennas with respect to the vehicle and to maneuver the spacecraft in time-constrained or hazardous environments. These 1980 missions aimed at exploring new areas of the solar system will be more demanding. New design philosophies and increased performance capabilities will be required to meet the constraints imposed by science requirements and mission-cost effectiveness.

Moore, J. W.↗
NASA NTRS1976

Technical challenges of integrating the Space Shuttle

A review is presented of the technology involved in integrating the Space Shuttle system. A powered flight analysis of the Shuttle is presented, touching upon the following areas: ascent profile and abort mode integration, sizing and design, control of load factor by a stage thrust shaping, structural load constraints, flight performance reserve and trajectory design for the orbital flight test. A discussion is presented of aerothermodynamics including aerodynamic and plume heating. Flight control and separation is considered with attention paid to liftoff, ascent to booster staging, elevon load relief, booster tailoff thrust mismatch and gimbal limitations and booster separation. Structural analysis and dynamics is examined, considering: vehicle loads and modes and the pogo effect. Propulsion aspects (hydraulics, the LH2 recirculation system, the antigeyser system, the pressurization system, etc.), ground vibration tests, separation system verification and flight readiness firing are all described.

Martin, A. C.↗
NASA NTRS1978

GEOS-3 coherent C-band tracking data reduction and analysis

The availability of a coherent C-Band transponder on an orbiting vehicle has permitted the development of calibration techniques for C-Band radars. Prior coherent tracking was limited to test vehicles in powered flight or skin tracking of orbiting spacecraft. The pulse Doppler range rate data available concurrently and independently with normal range and angle data provides an extremely useful data set for assessing the internal consistency of the radars measurements, particularly when coupled with a trajectory well constrained by orbit dynamics. In order to further assess the precision of the range rate data, a technique was developed to numerically integrate the rate measurements into a pseudo-range data set showing extremely low noise and high sensitivity to systematic radar errors. Evaluation of integrated range data led to improvements in calibration of both the rate and conventional range data. In particular, proper evaluation of the very sensitive integrated ranges required the development of a processing correction for beacon delay variation with signal strength, a significant error in the conventional ranging data.

Krabill, W. B.↗
NASA NTRS1979

The ultralight sailplane

As presently envisioned, the ultralight sailplane is intermediate in size, cost and performance between current hang gliders and the lower end of the traditional sailplane spectrum. In the design of an ultralight sailplane, safety, low cost, and operational simplicity were emphasized at the expense of absolute performance. An overview of the design requirements for an ultralight sailplane is presented. It was concluded that by a judicious combination of the technologies of hang gliding, human powered flight, conventional soaring and motor gliding, an operationally and economically viable class of ultralight, self-launching sailplanes can be developed.

Mcmasters, J. H.↗
NASA NTRS1978

Free as a bird - A point of view

A number of ways are discussed in which ingenious people can further increase their enjoyment of experimenting in air (balloons, man-powered flight, etc.). For the lowest cost forms of flight, private sponsorship has been modestly successful. Much more could be done if people would not take themselves so seriously and always demand that advanced technology should serve some nationalistic or economic goals. For the society, the next step forward will perhaps originate if it is demonstrated to the government, manufacturers, and customers that private flying has become too costly due to those factors which limit the acquisition and introduction of new knowledge.

Burke, J. D.↗
NASA NTRS1980

Attitude control study for a large flexible spacecraft using a Solar Electric Propulsion System (SEPS)

The attitude control performance of the solar electric propulsion system (SEPS) was evaluated. A thrust vector control system for powered flight control was examined along with a gas jet reaction control system, and a reaction wheel system, both of which have been proposed for nonpowered flight control. Comprehensive computer simulations of each control system were made and evaluated using a 30 mode spacecraft model. Results obtained indicate that thrust vector control and reaction wheel systems offer acceptable smooth proportional control. The gas jet control system is shown to be risky for a flexible structure such as SEPS, and is therefore, not recommended as a primary control method.

Tolivar, A. F.↗
NASA NTRS1980

The growth of birdwings

Growth and order allometry is defined and applied to the growth of bird effects of negative wing allometry discussed with regard to body size and flight power. Transposition and evolutionary significance are explained.

Meunier, K.↗
NASA NTRS1979

The ion drive program - Comet rendezvous issues for SEPS developers

Preliminary steps have been taken in a joint high-priority project between NASA and the European Space Agency, whereby a Solar Electric Propulsion System (SEPS), using ion drive of a 25-30 kilowatt power level, will be utilized for the first time, as part of the Space Transportation System, in powering a probe to be deployed toward Halley's comet in 1985 and a separate spacecraft which will rendezvous with the Temple 2 comet in 1988 and study it for one year. Unlike ballistically-launched vehicles, an unprecedented long-term interaction between the SEPS, the primary source of power and attitude control, and the spacecraft, responsible for data handling (at a rate of 10-120 kilobits per second), and command and telecommunications to earth (requiring capabilities at both X- and S-band frequencies, for dual-frequency navigational tracking), is required, as mission phases alternate between powered flight and science data-taking. Different design sensitivities are presented graphically.

Atkins, K. L.↗
NASA NTRS1985

A historic review of canard configurations

The first human-powered flight was achieved by a canard-configured aircraft (Wright Brothers). Although other canard concepts were flown with varying degrees of success over the years, the tail-aft configuration has dominated the aircraft market for both military and civil use. This paper reviews the development of canard aircraft with emphasis on stability and control, handling qualities, and operating problems. The results show that early canard concepts suffered adversely in flight behavior because of a lack of understanding of the sensitivities of these concepts to basic stability and control principles. Modern canard designs have been made competitive with tail-aft configurations by using appropriate handling qualities design criteria.

Anderson, S. B.↗
NASA NTRS1985

Analysis of the free-tip rotor wind-tunnel test results

The results from a wind tunnel test of a small scale free-tip rotor are analyzed. The free-tip rotor has blade tips that are free to weathervane into the tip's relative wind, thus producing a more uniform lift around the azimuth. The free-tip assembly, which includes the controller, functioned flawlessly throughout the test. In a test of the free-tip's response after passing through a vertical air jet, the tip pitched freely and in a controlled manner. Analysis of the tip's response characteristics showed the free-tip system's damped natural frequency to be 5.2 per rev. Tip pitch angle responses to the local airstream are presented for an advance-ratio range of 0.1 to 0.397 and for a solidity weighted rotor lift coefficient range of 0.038 to 0.092. Harmonic analysis of the responses showed a dominance by the first harmonic. As a result of the tip being free, forward flight power requirements were reduced by 8% or more. More power reduction was recorded for high thrust conditions. In addition to the power reduction, flatwise blade bending moments were reduced by as much as 30% at the inboard blade stations.

Stroub, Robert H.↗