Search NASA⌕ Search

SEARCH · Search NASA

Results for “quantum frequency conversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Generation of Microwave Pulses with a Carrier Frequency of 3.8 GHz and a Length of 75 ns by a Relativistic Cherenkov Microwave Oscillator without a Guiding Magnetic Field

In the experiment with an electron energy of ≈500 keV, the long-pulse (~300T, where T is the oscillation period) the generation regime of a relativistic Cherenkov microwave oscillator without a guiding magnetic field at a carrier frequency of 3.8 GHz has been obtained. A high-power microwave radiation pulse length of ~75 ns, a peak generation power of 210 ± 30 MW, and a power conversion efficiency of 9 ± 2% were attained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tailoring the spatiotemporal structure of biphoton entanglement in type-I parametric down-conversion

We investigate the spatiotemporal structure of the biphoton entangled state produced by parametric down-conversion (PDC) at the output face of the nonlinear crystal. We analyze the geometry of biphoton correlation for different gain regimes (from ultralow to high), different crystal lengths, and different tuning angles of the crystal. While for collinear or quasicollinear phase matching a X-shaped geometry, nonfactorizable in space and time, dominates, in the highly noncollinear conditions we observe a remarkable transition to a factorizable geometry. We show that the geometry of spatiotemporal correlation is a consequence of the angle-frequency relationship imposed by phase matching and that the fully spatiotemporal analysis provides a key to control the spatiotemporal properties of the PDC entangled state and in particular to access a biphoton localization in time and space in the femtosecond and micrometer range, respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Theoretical studies on the reaction pathways of electronically excited DAAF

The use of temporally and spectrally shaped ultrafast laser pulses to initiate, as well as detect, high explosives is being explored at Los Alamos. High level ab initio calculations, presented here, are employed to help guide and interpret the experiments. The ground and first excited electronic states of 3,3{prime}-diamino-4,4{prime}-azoxyfurazan (DAAF) are investigated using complete active space self-consistent field (CASSCF) and time-dependent density functional theory (TD-DFT). The geometrical and energetic character of the excited state minima, conical intersections and reaction pathways of DAAF are described. Two radiative and two non-radiative excited state population quenching mechanisms are outlined, and possible pathways for photochemical and spectroscopic control are discussed. The use of laser light to control chemical reactions has many applications. The initiation and the detection of explosives are two such applications currently under development at Los Alamos. Though inherently experimental, the project can be aided by theory through both prediction and interpretation. When the laser light is in the UV/visible region of the electromagnetic spectrum, the absorbing molecule is excited electronically and excitation decay may occur either radiatively (fluorescence or phosphorescence) or non-radiatively (through internal conversion). In many cases decay of the excitation occurs through a mixture of processes, and maximizing the desired result requires sophisticated laser pulses whose amplitude has been optimally modulated in time and/or frequency space. Control of cis-stilbene photochemistry was recently demonstrated in our group, and we aim to extend this work to high explosive compounds. Maximizing radiative decay leads to increased fluorescence quantum yields and enhances the possibility of spectral detection of the absorbing molecule. Maximizing non-radiative decay can lead to chemistry, heating of the sample and possibly detonation initiation in an explosive compound. Here we describe high level quantum chemistry calculations aimed at mapping the electronic states involved in excitation of 3,3{prime}-Diamino-4,4{prime}-azoxyfurazan (DAAF) with 400-nm light. DAAF is a high-nitrogen high explosive that is of interest for its relative insensitivity to shock compression. The goal of the theoretical work described here is to determine the competing pathways for radiative and non-radiative electronic state quenching in an effort to help guide spectroscopic experiments being conducted in tandem.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Noise in Josepson effect mixers and the RSJ model

Josephson effect mixers have previously been observed to display 'excess' noise both in experiments with point contacts and in numerical simulations using the resistively shunted junction (RSJ) model. This excess noise causes the mixer noise temperature to be a factor of typically 20-100 times the physical temperature of the device. Previously, this excess was ascribed to conversion from unwanted sidebands of the local oscillator and Josephson frequencies and their harmonics. Our numerical modeling of the RSJ equations has led to a new understanding of the excess noise, which is simply due to the intrinsic Josephson oscillations of the device. In addition, we have extended the modeling to include the previously ignored case of finite device capacitance (i.e. RSJ capacitance parameter beta(sub c) does not equal 0, which is more realistic for lithographically defined Josephson such as shunted tunnel junctions or SNS bridges. For some cases, this yields an improvement of a factor of two in noise temperature from the zero capacitance models. We will discuss the device parameters which optimize the mixer performance for frequencies approaching the characteristic frequency of the device, which is given by the Josephson frequency at the I(sub c)R(sub n) voltage (nu = 2eI(sub c)R(sub n)/h). These modeling results predict good conversion efficiency and a noise temperature within a factor of a few of the physical temperature. Experiments are in progress to determine the accuracy of this modeling using a waveguide mixer at 100 GHz with optimized, resistively shunted Nb tunnel junctions. If the modeling results are valid, they are particularly encouraging for mixers in the submillimeter regime, given the possibility of obtaining non-hysteretic Josephson devices with I(sub c)R(sub n) products in excess of a millivolt, using for instance, high-T(sub c) SNS bridges. We discuss the modifications to the classical RSJ model which are necessary in the quantum regime (h nu greater than kT), and conclude the Josephson mixers may attain noise temperatures less than ten times the quantum limit at high frequencies.

Schoelkopf, R.↗

Development, applications, and future of infrared upconversion

Infrared upconversion is a technique that converts linearly polarized infrared photons to photons of higher frequency. The technique can be applied advantageously to the detection of IR radiation because the upconverted signal can be detected by photon-counting devices available for the visible spectral region. In addition, unlike presently available IR detectors, an upconversion device can provide sensitivity to IR radiation without the need for cryogenic cooling. Infrared upconversion was first demonstrated in 1961. By 1974, approximately 100% quantum conversion efficiency and a bandwidth of 1.81 microns had been attained. Photometric detection of IR radiation from various astronomical objects had also been demonstrated. Research is presently under way on the application of upconversion to astronomical spectroscopy and to imaging. The major drawback to the upconversion technique is the sheer bulk of the apparatus involved. It is anticipated that this problem can be overcome by applying the developing technology of integrated optics.

Gurski, T. R.↗

ICRF Mode Conversion Flow Drive Experiments on Alcator C-Mod

We have carried out a detailed study of the dependence of ICRF mode conversion flow drive (MCFD) on plasma and RF parameters. The flow drive efficiency is found to depend strongly on the {sup 3}He concentration in D({sup 3}He) plasmas, a key parameter separating the ICRF minority heating regime and mode conversion regime. At +90 deg. antenna phasing (waves in the co-I{sub p} direction) and dipole phasing, the driven flow is in the co-I{sub p} direction, and the change of the rotation velocity increases with both P{sub RF} and I{sub p}, and scales unfavorably vs. plasma density and antenna frequency. When MCFD is applied to I-mode plasmas, the plasma rotation increases until the onset of MHD modes triggered by large sawtooth crashes. Very high performance I-mode plasmas with H{sub ITER98,y2}{approx}1.4 and T{sub e0}{approx}8 keV have been obtained in these experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetoplasmonic RF mixing and nonlinear frequency generation

We present the design of a magnetoplasmonic Mach-Zehnder interferometer (MZI) modulator facilitating radio-frequency (RF) mixing and nonlinear frequency generation. This is achieved by forming the MZI arms from long-range dielectric-loaded plasmonic waveguides containing bismuth-substituted yttrium iron garnet (Bi:YIG). The magnetization of the Bi:YIG can be driven in the nonlinear regime by RF magnetic fields produced around adjacent transmission lines. Correspondingly, the nonlinear temporal dynamics of the transverse magnetization component are mapped onto the nonreciprocal phase shift in the MZI arms, and onto the output optical intensity signal. We show that this tunable mechanism can generate harmonics, frequency splitting, and frequency down-conversion with a single RF excitation, as well as RF mixing when driven by two RF signals. This magnetoplasmonic component can reduce the number of electrical sources required to generate distinct optical modulation frequencies and is anticipated to satisfy important applications in integrated optics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Generation of difference frequencies in nonhelicoidal smectic liquid crystals

Generation of six difference frequencies in cells with nonhelicoidal smectic liquid crystals for six argon laser lines has been experimentally obtained for the first time. The maximum energy conversion efficiency is about 3% at a total input radiation power of 125 mW.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantum limits of superconducting-photonic links and their extension to millimeter waves

Photonic addressing of superconducting circuits has been proposed to overcome wiring complexity and heat-load challenges. However, such superconducting-photonic links suffer from an efficiency-noise trade-off that limits scalability. This trade-off arises because increasing power conversion efficiency entails reducing optical power, which makes the converted signal susceptible to shot noise. We analyze this trade-off and find that the laser-driven qubit gate infidelity scales inversely with the number of photons used. While methods such as nonlinear detection or squeezed light could mitigate this effect, we consider generating higher-frequency electrical signals, such as millimeter waves (100 GHz), using laser light. At these higher frequencies, circuits have higher operating temperatures and cooling power budgets and alleviate constraints posed by the trade-off. Therefore, we demonstrate an optically driven cryogenic millimeter-wave source with a maximum power efficiency of 8 ×10 −5 that can generate a maximum of 0.7 μ⁢W of 80 GHz power, with a 1200-thermal-photon equivalent of added noise at 4K. Using this source, we perform frequency-domain spectroscopy of superconducting NbTiN resonators at 80–90 GHz. Our results show a promising approach to lessen the efficiency-noise constraints on superconducting-photonic links, while leveraging the benefits of photonic signal delivery. Further optimization of power efficiency and noise at high frequencies could make scalable photonic control of superconducting qubits viable at temperatures exceeding 1K.

Optoelectronics↗

Rectennas at optical frequencies: How to analyze the response

Optical rectennas, antenna-coupled diode rectifiers that receive optical-frequency electromagnetic radiation and convert it to DC output, have been proposed for use in harvesting electromagnetic radiation from a blackbody source. The operation of these devices is qualitatively different from that of lower-frequency rectennas, and their design requires a new approach. To that end, we present a method to determine the rectenna response to high frequency illumination. It combines classical circuit analysis with classical and quantum-based photon-assisted tunneling response of a high-speed diode. We demonstrate the method by calculating the rectenna response for low and high frequency monochromatic illumination, and for radiation from a blackbody source. Such a blackbody source can be a hot body generating waste heat, or radiation from the sun.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Continuous-wave laser generation of slow THz surface plasmons in an array of single-walled carbon nanotubes

The mechanism of generation of surface plasmon polaritons in the THz and far-IR ranges by laser irradiation of arrays of single-walled carbon nanotubes is considered. It is shown that by varying the angle of incidence of the laser beam, one can change the frequency of generated surface plasmon polaritons. As consequence, the nanotube length can be matched to the laser wavelength for efficient conversion of cw laser radiation to the THz range.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Neutrino spectral split in core-collapse supernovae: A magnetic resonance phenomenon

A variety of neutrino flavor conversion phenomena occur in core-collapse supernova, due to the large neutrino density close to the neutrinosphere, and the importance of the neutrino-neutrino interaction. Three different regimes have been identified so far, usually called the synchronization, the bipolar oscillations, and the spectral split. Using the formalism of polarization vectors, within two flavors, we focus on the spectral split phenomenon and we show for the first time that the physical mechanism underlying the neutrino spectral split is a magnetic resonance phenomenon. In particular, we show that the precession frequencies fulfill the magnetic resonance conditions. Our numerical calculations show that the neutrino energies and the location at which the resonance takes place in the supernova coincide well with the neutrino energies at which a spectral swap occurs. The corresponding adiabaticity parameters present spikes at the resonance location.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical Time Reversal from Time-Dependent Epsilon-Near-Zero Media

Materials with a spatially uniform but temporally varying optical response have applications ranging from magnetic field-free optical isolators to fundamental studies of quantum field theories. However, these effects typically become relevant only for time variations oscillating at optical frequencies, thus presenting a significant hurdle that severely limits the realization of such conditions. Here we present a thin-film material with a permittivity that pulsates (uniformly in space) at optical frequencies and realizes a time-reversing medium of the form originally proposed by Pendry [Science 322, 71 (2008)]. We use an optically pumped, 500 nm thick film of epsilon-near-zero (ENZ) material based on Al-doped zinc oxide. An incident probe beam is both negatively refracted and time reversed through a reflected phase-conjugated beam. As a result of the high nonlinearity and the refractive index that is close to zero, the ENZ film leads to time reversed beams (simultaneous negative refraction and phase conjugation) with near-unit efficiency and greater-than-unit internal conversion efficiency. The ENZ platform therefore presents the time-reversal features required, e.g., for efficient subwavelength imaging, all-optical isolators and fundamental quantum field theory studies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Emittance-Exchange-Based High Harmonic Generation Scheme for a Short-Wavelength Free Electron Laser

Generation of short-wavelength radiation by a free-electron laser using up-frequency conversion of an electron bunch density modulation is currently an area of active research. We propose a new scheme for producing the longitudinal electron bunch density modulation similar to the recently proposed echo-enabled harmonic generation but based on an emittance exchange beam line and a multislit mask. Beam line analysis and start-to-end simulation are presented.

43 PARTICLE ACCELERATORS↗

Spectral phase shifts in femtosecond parametric down-conversion with media dispersion

We theoretically study the spectral phase shift of a midinfrared (MIR) femtosecond pulse generated through parametric frequency down-conversion in dispersive media, with an emphasis on the effect of group-velocity dispersion (GVD), with the aim of obtaining guidelines for dispersion compensation and pulse compression in such systems. It is found that the spectral phase of the generated MIR pulse differs significantly from that of due to its linear propagation. We consider two common ways of MIR femtosecond pulse generation: difference frequency generation (DFG) and optical parametric amplification (OPA). The resultant spectral phase is determined by the initial injection condition, and the transfer of the spectral phase accumulated by the higher-frequency fields. Our results show that in DFG, pump depletion has little effect on the spectral phase, while in OPA, the combined effect of linear GVD and high parametric gain leads to a notable dependence of spectral phase on gain--the higher the gain, the less the spectral phase. Quantitatively, under conditions where the MIR pulse is generated through injection of two higher-frequency fields, its spectral phase is close to only half of that accumulated through linear propagation in DFG, while it is even smaller in OPA. To obtain the shortest MIR femtosecond pulse, these results determine the amount of dispersion that needs compensation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Switched-capacitor isolated LED driver

A switched-capacitor voltage converter which is particularly well-suited for receiving a line voltage from which to drive current through a series of light emitting diodes (LEDs). Input voltage is rectified in a multi-level rectifier network having switched capacitors in an ascending-bank configuration for passing voltages in uniform steps between zero volts up to full received voltage V.sub.DC. A regulator section, operating on V.sub.DC, comprises switched-capacitor stages of H-bridge switching and flying capacitors. A current controlled oscillator drives the states of the switched-capacitor stages and changes its frequency to maintain a constant current to the load. Embodiments are described for isolating the load from the mains, utilizing an LC tank circuit or a multi-primary-winding transformer.

30 DIRECT ENERGY CONVERSION↗

Millimeter-wave home area network prospect with cost-effective RoF links

The growth towards the millimeter-wave band in the home area networks (HAN) leads to high data rate transmission to satisfy the new user services. Unfortunately, the transmission coverage in this band is limited to short distances because of the strong air absorption and obstacles such as walls. The effort is then focused on the extension of the network coverage of the wireless link in this band. Solutions based on multiple connected access points to optical fibers are useful methods to ensure wireless connectivity to the entire home. For HAN applications, radio-over-fiber (RoF) using intensity modulation and direct detection technique is the mostly favorite technology for the transmission of a broadband wireless signal because dealing with a cost-effective solution. We investigate in this paper the performance of such RoF-wireless architecture with low-cost optoelectronic modules through the error vector magnitude (EVM) metric. The RoF links investigated are a directly modulated VCSEL with integrated photoreceiver module, an electroabsorption-modulated laser with PIN photodiode and a Mach–Zehnder Modulator with PIN photodiode. A simulation approach based on equivalent electrical circuit models of photonic components is developed in ADS (Advanced Design System) by using a co-simulation technique that combines both analog and digital signals. The downlink channel of the complete transmission system including wireless channel and frequency conversion circuits to millimeter-wave (mm-wave) band is studied by simulation. The obtained results of EVM show good performances of cost-effective links with QPSK and 16-QAM modulation over a dynamic range of 15 dB.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A dual electromagnetic array with intrinsic frequency up-conversion for broadband vibrational energy harvesting

This letter proposes a dual electromagnetic array to transform low frequency rectilinear vibrations into electricity with frequency up-conversion. The free of mechanical contact harvester consists of a rectilinear oscillator (R L O) and an array of two identical rotary oscillators (R T O). The R T O includes a rotor and a stator. The rotor has eight cubic magnets distributed centrosymmetrically, and the stator has eight coils. Under rectilinear vibrational excitations, the R L O drives the rotor of the R T O to rotate through magnetic torque acting on the rotors. A slight fluctuation of the rectilinear motion can lead to a great change of torque, which converts the low frequency vibrations into high frequency rotational motions. By adopting the frequency up-conversion mechanism, a high instantaneous output voltage is produced and maintained from 3.0 Hz to 9.5 Hz. Experiments show that with the dual rotor array, the output power is improved and the R L O is able to oscillate at its resonance even if the input frequency is greater than its resonant frequency, which implies a potential solution to suppress and harvest vibration energy during an earthquake if properly arraying multiple rotors. Under the excitation of 0.5 g and 4.0 Hz, the harvester can provide a stable DC power of 3.1 mW after AC-DC conversion.

Vibrational spectra↗