Search NASA⌕ Search

SEARCH · Search NASA

Results for “radiation front”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Far-infrared observations of the evolved H II region M16

The results of far infrared (FIR) observations of the larger H II region M16, associated with the young open star cluster NGC 6611, are discussed. Three FIR sources detected on an extended ridge of FIR emission within the scanned region are described. The observations confirm that M16 is an H II region in a late stage of evolution. The H II region has expanded and is now extremely density bounded, consisting of an extended region of ionized gas and a series of ionization fronts located at the surrounding molecular cloud boundaries nearest to the exciting OB star cluster. The FIR radiation arises from heated dust at these boundaries.

Mcbreen, B.↗
NASA NTRS1991

A comparative study of performance parameters of n(+)-p InP solar cells made by closed-ampoule sulfur diffusion into Cd- and Zn-doped p-type InP substrates

Preliminary results indicate that Cd-doped substrates are better candidates for achieving high efficiency solar cells fabricated by closed-ampoule sulfur (S) diffusion than Zn-doped substrates. The differences in performance parameters (i.e., 14.3 percent efficiency for Cd-doped vs. 11.83 percent in the case of Zn-doped substrates of comparable doping and etch pit densities) were explained in terms of a large increase in dislocation density as a result of S diffusion in the case of Zn-doped as compared to Cd-doped substrates. The In(x)S(y) and probably Zn(S) precipitates in the case of Zn-doped substrates, produce a dead layer which extends deep below the surface and strongly affects the performance parameters. It should be noted that the cells had an unoptimized single layer antireflective coating of SiO, a grid shadowing of 6.25 percent, and somewhat poor contacts, all contributing to a reduction in efficiency. It is believed that by reducing the external losses and further improvement in cell design, efficiencies approaching 17 percent at 1 AMO, 25 degrees should be possible for cells fabricated on these relatively high defect density Cd-doped substrates. Even higher efficiencies, 18 to 19 percent should be possible by using long-lifetime substrates and further improving front surface passivation. If solar cells fabricated on Cd-doped substrates turn out to have comparable radiation tolerance as those reported in the case of cells fabricated on Zn-doped substrates, then for certain space missions 18 to 19 percent efficient cells made by this method of fabrication would be viable.

Faur, Mircea↗
NASA NTRS1998

[MODIS Investigation]

The objective of the last six months were: (1) Continue analysis of Hawaii Ocean Time-series (HOT) bio-optical mooring data, and Southern Ocean bio-optical drifter data; (2) Complete development of documentation of MOCEAN algorithms and software for use by MOCEAN team and GLI team; (3) Deploy instrumentation during JGOFS cruises in the Southern Ocean; (4) Participate in test cruise for Fast Repetition Rate (FRR) fluorometer; (5) Continue chemostat experiments on the relationship of fluorescence quantum yield to environmental factors; and (6) Continue to develop and expand browser-based information system for in situ bio-optical data. We are continuing to analyze bio-optical data collected at the Hawaii Ocean Time Series mooring as well as data from bio-optical drifters that were deployed in the Southern Ocean. A draft manuscript has now been prepared and is being revised. A second manuscript is also in preparation that explores the vector wind fields derived from NSCAT measurements. The HOT bio-optical mooring was recovered in December 1997. After retrieving the data, the sensor package was serviced and redeployed. We have begun preliminary analysis of these data, but we have only had the data for 3 weeks. However, all of the data were recovered, and there were no obvious anomalies. We will add second sensor package to the mooring when it is serviced next spring. In addition, Ricardo Letelier is funded as part of the SeaWiFS calibration/validation effort (through a subcontract from the University of Hawaii, Dr. John Porter), and he will be collecting bio-optical and fluorescence data as part of the HOT activity. This will provide additional in situ measurements for MODIS validation. As noted in the previous quarterly report, we have been analyzing data from three bio-optical drifters that were deployed in the Southern Ocean in September 1996. We presented results on chlorophyll and drifter speed. For the 1998 Ocean Sciences meeting, a paper will be presented on this data set, focusing on the diel variations in fluorescence quantum yield. Briefly, there are systematic patterns in the apparent quantum yield of fluorescence (defined as the slope of the line relating fluorescence/chlorophyll and incoming solar radiation). These systematic variations appear to be related to changes in the circulation of the Antarctic Polar Front which force nutrients into the upper ocean. A more complete analysis will be provided in the next Quarterly report.

Abbott, Mark R.↗
NASA NTRS2011

Broadband Via-Less Microwave Crossover Using Microstrip-CPW Transitions

The front-to-back interface between microstrip and CPW (coplanar waveguide) typically requires complex fabrication or has high radiation loss. The microwave crossover typically requires a complex fabrication step. The prior art in microstrip-CPW transition requires a physical vias connection between the microstrip and CPW line on a separate layer. The via-less version of this transition was designed empirically and does not have a close form solution. The prior art of the micro wave crossover requires either additional substrate or wire bond as an air bridge to isolate two microwave lines at the crossing junction. The disadvantages are high radiation loss, no analytical solution to the problem, lengthy simulation time, and complex fabrication procedures to generate air bridges or via. The disadvantage of the prior crossover is a complex fabrication procedure, which also affects the device reliability and yield. This microstrip-CPW transition is visualized as two microstrip-slotline transitions combined in a way that the radiation from two slotlines cancels each other out. The invention is designed based on analytical methods; thus, it significantly reduces the development time. The crossover requires no extra layer to cross two microwave signals and has low radiation loss. The invention is simple to fabricate and design. It produces low radiation loss and can be designed with low insertion loss, with some tradeoff with signal isolation. The microstrip-CPW transition is used as an interface to connect between the device and the circuit outside the package. The via-less microwave crossover is used to allow two signals to cross without using an extra layer or fabrication processing step to enable this function. This design allows the solution to be determined entirely though analytical techniques. In addition, a planar via-less microwave crossover using this technique was proposed. The experimental results show that the proposed crossover at 5 GHz has a minimum isolation of 32 dB. It also has low in-band insertion loss and return loss of 1.2 dB and 18 dB, respectively, over more than 44 percent of bandwidth at room temperature. This microstrip-CPW transition requires the microstrip line to be split into two sections. Each section is connected to a microstrip quarter-wavelength openended stub. A slotline is also placed perpendicular to the microstrip section. The slot is connected to a grounded-end quarter-wavelength slotline and generates a microstrip-slotline transition. When two of these sections are placed in parallel and with the microstrip section combined at transition, a microstrip- CPW transition is formed. The slotline radiation is suppressed as two slots are excited with the electric field in an opposite direction, which cancels the radiation in far field. The invention on the crossover consists of the invented microstrip-CPW transitions combined back-to-back and a microstrip low-pass filter. One signal is crossed through to the microstrip layer, while the other signal is crossed through the CPW line located on the ground plane of the microstrip line. The microstrip low-pass filter produces a narrow line at the crossing point to enhance the system isolation. It also produces broadband response in the operating frequency band. The microstrip-CPW transition allows a microwave signal to travel from microstrip line to CPW line with low radiation loss. The crossover allows two microwave signals to cross with minimal parasitic coupling.

Stevenson, Thomas↗
NASA NTRS1996

Thermal analysis of HGFQ using FIDAP(trademark): Solidification front motion

The High Gradient Furnace with Quench (HGFQ) is being designed by NASA/MSFC for flight on the International Space Station. The furnace is being designed specifically for solidification experiments in metal and metallic alloy systems. The HGFQ Product development Team (PDT) has been active since January 1994 and their effort is now in early Phase B. Thermal models have been developed both by NASA and Sverdrup (support contractor) to assist in the HGFQ design effort. Both these models use SINDA as a solution engine, but the NASA model was developed using PATRAN and includes more detail than the Sverdrup model. These models have been used to guide design decisions and have been validated through experimentation on a prototypical 'Breadboard' furnace at MSFC. One facet of the furnace operation of interest to the designers is the sensitivity of the solidification interface location to changes in the furnace setpoint. Specifically of interest is the motion (position and velocity) of the solidification front due to a small perturbation in the furnace temperature. FIDAP(TM) is a commercially available finite element program for analysis of heat transfer and fluid flow processes. Its strength is in solution of the Navier-Stokes equations for incompressible flow, but among its capabilities is the analysis of transient processes involving radiation and solidification. The models presently available from NASA and Sverdrup are steady-state models and are incapable of computing the motion of the solidification front. The objective of this investigation is to use FIDAP(TM) to compute the motion of the solidification interface due to a perturbation in the furnace setpoint.

Woodbury, Keith A.↗
NASA NTRS1976

Prediction and measurement of radiation damage to CMOS devices on board spacecraft

The CMOS Radiation Effects Measurement (CREM) experiment is presently being flown on the Explorer-55, to evaluate device performance in the actual space radiation environment and to correlate the respective measurements to on-the-ground laboratory irradiation results. The experiment contains an assembly of CMOS and P-MOS devices shielded in front over 2 pi steradian by flat slabs of aluminum of 40, 80, 150, and 300 mils (1.02, 2.04, 3.81, and 7.62 mm) thicknesses, and by a practically infinite shield in the back. Initial results from the CREM experiment are reported. Predictions of radiation damage to CMOS devices are based on standard environment models and computational techniques. Measured space damage is smaller than predicted by about a factor of 2-3 for thin shields but agrees well with predictions for thicker shields. It is not clear at this time how the trapped particle environment models or the computational methods should be modified in order to achieve better agreement between experimental results and predicted damage curves.

Cliff, R. A.↗
NASA NTRS1998

Two-Dimensional Failure Waves and Ignition Fronts in Premixed Combustion

This paper is a continuation of our work on edge-flames in premixed combustion. An edge-flame is a two-dimensional structure constructed from a one-dimensional configuration that has two stable solutions (bistable equilibrium). Edge-flames can display wavelike behavior, advancing as ignition fronts or retreating as failure waves. Here we consider two one-dimensional configurations: twin deflagrations in a straining flow generated by the counterflow of fresh streams of mixture: and a single deflagration subject to radiation losses. The edge-flames constructed from the first configuration have positive or negative speeds, according to the value of the strain rate. But our numerical solutions strongly suggest that only positive speeds (corresponding to ignition fronts) can exist for the second configuration. We show that this phenomenon can also occur in diffusion flames when the Lewis numbers are small. And we discuss the asymptotics of the one-dimensional twin deflagration configuration. an overlooked problem from the 70s.

Vedarajan, T. G.↗
NASA NTRS1971

NOAA's oceanography studies under the Earth Resources Survey Program

Some results are presented of Earth Resources Survey Program studies conducted on: (1) Defining and developing methods of suppressing system noise and cloud contamination in satellite measurements of infrared window radiation. (2) Relating sea surface temperature patterns in the Gulf Stream and Gulf of Mexico to associated thermal front structure with aid of infrared data from Nimbus or ITOS. (3) Testing the feasibility of mapping sea surface roughness and low level wind speed over tropical oceans by means of ATS imagery in sun glitter zones. (4) Microwave radiometer measurements from aircraft and their usefulness and limitations for all-weather mapping of surface roughness, sea ice conditions, and possible surface temperature. (5) Evaluation of scanning radiometer data from ITOS for purposes of mapping snow and ice conditions.

Mcclain, E. P.↗
NASA NTRS1989

The photoevaporation of interstellar clouds. I - Radiation-driven implosion

An approximate analytical solution is developed for the evolution of an interstellar neutral cloud exposed to the ionizing radiation of a newly formed star. The structure of a steady photoevaporation gas flow off a spherical ionization front is derived even for cases where the ionization front cannot be considered thin, and the downstream flow is not in ionization and thermal equilibrium. Under a wide range of conditions, the ionization front is approximately D-critical, and the ionized gas expands supersonically into the intercloud medium. The ionization front typically drives a strong shock into the initial cloud.

Bertoldi, Frank↗
NASA NTRS1990

Hot interstellar gas and ionization of embedded clouds

Researchers present detailed photoionization calculations for the instellar cloud in which the Sun is embedded. They consider the EUV radiation field with contribution from discrete stellar sources and from a thermal bremsstrahlung-radiative recombination spectrum emitted from the surrounding 10 to the 6th power k coronal substrate. They establish lower limits to the fractional ionization of hydrogen and helium of 0.17 and 0.29 respectively. The high He ionization fraction results primarily from very strong line emission below 500 A originating in the surrounding coronal substrate while the H ionization is dominated by the EUV radiation from the discrete stellar sources. The dual effects of thermal conduction and the EUV spectrum of the 10 to the 6th k plasma on ionization in the cloud skin are explored. The EUV radiation field and Auger ionization have insignificant effects on the resulting ionic column densities of Si IV, C IV, N V and O VI through the cloud skin. Calculations show that the abundances of these species are dominated by collisional ionization in the thermal conduction front. Because of a low charge exchange rate with hydrogen, the ionic column density ratios of N (CIII)/N (CII) and N (NII)/N (NI) are dominated by the EUV radiation field in the local interstellar medium. These ratios should be important diagnostics for the EUV radiation field and serve as surrogate indicators of the interstellar He and H ionization fraction respectively. Spacecraft such as Lyman which is designed to obtain high resolution spectral data down to the Lyman limit at 912 A could sample interstellar lines of these ions.

Cheng, K.-P.↗
NASA NTRS2005

Ice Forming Regions during Evolution of the Solar Nebula

The condensation/sublimation front using a two dimensional model of the evolving solar system is investigated based on combined viscous and radiative heating. The snow line is shown to be a two-branched curve reflecting the competing effects of solar heating in the photosphere and internal heating at the center plane. The evolution of the icy region is described from a limited region early in the disk evolution to final positions near 1 AU. The snow line evolution predicted using two surface density models, a Hayashi minimum mass power law and an analytical solution of the nebula evolution equation. Possible effects of this dynamic motion on disk chemistry and organic molecule formation is also described.

Davis, Sanford S.↗
NASA NTRS1974

Means for mapping radiated fields and for measuring differential movement of antenna elements

Null seeking system uses two transponders located at selected points on dish to detect phase-front of received signal. One signal line has continuously variable phase shifter driven by reversible stepmotor. Each of two transponders on dish is a dipole with mixer crystal between elements. Crystal is driven, in turn, by 181.6MHz signal carried by miniature coaxial cable.

Lundy, C. C.↗
NASA NTRS2016

Measurement of Radiative Non-Equilibrium for Air Shocks Between 7-9 Km/s

This paper describes a recent characterization of non-equilibrium radiation for shock speeds between 7 and 9 km/s in the NASA Ames Electric Arc Shock Tube (EAST) Facility. Data is spectrally resolved from 190- 1450 nm and spatially resolved behind the shock front. Comparisons are made to DPLR/NEQAIR simulations using different modeling options and recommendations for future study are made based on these comparisons.

Radiation↗
NASA NTRS1981

Computer prediction of dual reflector antenna radiation properties

A program for calculating radiation patterns for reflector antennas with either smooth analytic surfaces or with surfaces composed of a number of panels. Techniques based on the geometrical optics (GO) approach were used in tracing rays over the following regions: from a feed antenna to the first reflector surface (subreflector); from this reflector to a larger reflector surface (main reflector); and from the main reflector to a mathematical plane (aperture plane) in front of the main reflector. The equations of GO were also used to calculate the reflected field components for each ray making use of the feed radiation pattern and the parameters defining the surfaces of the two reflectors. These resulting fields form an aperture distribution which is integrated numerically to compute the radiation pattern for a specified set of angles.

Christodoulou, C.↗
NASA NTRS1977

Self-calibrating radiometer

Instrument has differential thermocouples that measure temperature on two sides of receiver; one side is heated by absorbed radiation, the other by resistance heater. By measuring energy required to heat back surface, amount of energy absorbed on front may be determined.

Dimeff, J.↗
NASA NTRS1987

U.S. national report to the International Union of Geodesy and Geophysics

This paper highlights progress by U.S. authors during 1983-1986 in the broad area of auroral research. Atmospheric emissions and their use as a tool for remote-sensing the dynamics, energetics, and effects of auroral activity is a subject which is emphasized here because of the vast progress made in this area on both observational and theoretical fronts. The evolution of primary auroral electrons, the acceleration of auroral ions, small-scale electric fields, auroral kilometric radiation, auroral empirical models and activity indices are also reviewed. An extensive bibliography is supplied.

Gorney, D. J.↗
NASA NTRS1992

Eye-safe visible wavelength lidar

Recent technological advances on several fronts offer the possibility for relatively low-cost, eye-safe visible-wavelength lidar systems for autonomous aerosol/environmental monitoring applications. Improved silicon photodiodes and avalanche photodiodes that have become available offer high-quantum-efficiency detection at very low dark counts (10 to 1000 count/s) and can be used in a photon counting mode for signal plus background and dark current photoelectron count rates of megahertz. The essential requirements and features of a possible lidar system that capitalizes on technical advances on several fronts are outlined. A baseline lidar system is suggested for monitoring tropospheric and stratospheric aerosols. Sensitivity to wavelength, background radiation, detector characteristics, and other system parameters is discussed for several simulated data sets.

Cooley, T. W.↗