Search NASA⌕ Search

SEARCH · Search NASA

Results for “real gas”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

High-resolution shock-capturing schemes for inviscid and viscous hypersonic flows

The development of robust, accurate, and efficient implicit shock-capturing schemes for multidimensional compressible Navier-Stokes equations in the hypersonic and real gas flow regimes is presently undertaken by extending a class of implicit total variation-diminishing (TVD) schemes suitable for transonic and supersonic, multidimensional Euler and Navier-Stokes equations to hypersonic computations. Numerical aspects of TVD schemes are identified which affect the convergence rate for hypersonic Mach numbers and real gas flows, but which have a negligible effect on low Mach number or perfect gas flows.

Yee, H. C.↗
NASA NTRS1975

Preliminary study of the minimum temperatures for valid testing in a cryogenic wind tunnel

The minimum operating temperature which avoids real-gas effects, such as condensation, was determined for M sub infinity = 0.85 flow over a 0.137-meter NACA 0012-64 airfoil mounted in the Langley 1/3-meter transonic cryogenic tunnel. For temperatures within 5 K of reservoir saturation and total pressures from 1.2 to 4.5 atmospheres, the pressure distributions over the airfoil are not altered by real-gas effects. This ability to test at total temperatures below those which avoid saturation over the airfoil allows an increase in Reynolds number capability of at least 17 percent for a constant tunnel total pressure. Similarly, 17 percent less total pressure is required to obtain a given Reynolds number.

Hall, R. M.↗
NASA NTRS1961

Experimental Determination of the Recovery Factor and Analytical Solution of the Conical Flow Field for a 20 deg Included Angle Cone at Mach Numbers of 4.6 and 6.0 and Stagnation Temperatures to 2600 degree R

The local recovery factor was determined experimentally along the surface of a thin-walled 20 deg included angle cone for Mach numbers near 6.0 at stagnation temperatures between 1200 deg R and 2600 deg R. In addition, a similar cone configuration was tested at Mach numbers near 4.5 at stagnation temperatures of approximately 612 deg R. The local Reynolds number based on flow properties at the edge of the boundary layer ranged between 0.1 x 10(exp 4) and 3.5 x 10(exp 4) for tests at temperatures above 1200 deg R and between 6 x 10(exp 4) and 25 x 10(exp 4) for tests at temperatures near 612 deg R. The results indicated, generally, that the recovery factor can be predicted satisfactorily using the square root of the Prandtl number. No conclusion could be made as to the necessity of evaluating the Prandtl number at a reference temperature given by an empirical equation, as opposed to evaluating the Prandtl number at the wall temperature or static temperature of the gas at the cone surface. For the tests at temperatures above 1200 deg R (indicated herein as the tests conducted in the slip-flow region), two definite trends in the recovery data were observed - one of increasing recovery factor with decreasing stagnation pressure, which was associated with slip-flow effects and one of decreasing recovery factor with increasing temperature. The true cause of the latter trend could not be ascertained, but it was shown that this trend was not appreciably altered by the sources of error of the magnitude considered herein. The real-gas equations of state were used to determine accurately the local stream properties at the outer edge of the boundary layer of the cone. Included in the report, therefore, is a general solution for the conical flow of a real gas using the Beattie-Bridgeman equation of state. The largest effect of temperature was seen to be in the terms which were dependent upon the internal energy of the gas. The pressure and hence the pressure drag terms were unaffected.

Pfyl, Frank A.↗
NASA NTRS1992

Computational fluid dynamics analysis of Space Shuttle main engine multiple plume flows at high-altitude flight conditions

Computational fluid dynamics (CFD) analysis is providing verification of Space Shuttle flight performance details and is being applied to Space Shuttle Main Engine Multiple plume interaction flow field definition. Advancements in real-gas CFD methodology that are described have allowed definition of exhaust plume flow details at Mach 3.5 and 107,000 ft. The specific objective includes the estimate of flow properties at oblique shocks between plumes and plume recirculation into the Space Shuttle Orbiter base so that base heating and base pressure can be modeled accurately. The approach utilizes the Rockwell USA Real Gas 3-D Navier-Stokes (USARG3D) Code for the analysis. The code has multi-zonal capability to detail the geometry of the plumes based region and utilizes finite-rate chemistry to compute the plume expansion angle and relevant flow properties at altitude correctly. Through an improved definition of the base recirculation flow properties, heating, and aerodynamic design environments of the Space Shuttle Vehicle can be further updated.

Dougherty, N. S.↗
NASA NTRS2000

Computer Programs for Calculating the Isentropic Flow Properties for Mixtures of R-134a and Air

Three computer programs for calculating the isentropic flow properties of R-134a/air mixtures which were developed in support of the heavy gas conversion of the Langley Transonic Dynamics Tunnel (TDT) from dichlorodifluoromethane (R-12) to 1,1,1,2 tetrafluoroethane (R-134a) are described. The first program calculates the Mach number and the corresponding flow properties when the total temperature, total pressure, static pressure, and mole fraction of R-134a in the mixture are given. The second program calculates tables of isentropic flow properties for a specified set of free-stream Mach numbers given the total pressure, total temperature, and mole fraction of R-134a. Real-gas effects are accounted for in these programs by treating the gases comprising the mixture as both thermally and calorically imperfect. The third program is a specialized version of the first program in which the gases are thermally perfect. It was written to provide a simpler computational alternative to the first program in those cases where real-gas effects are not important. The theory and computational procedures underlying the programs are summarized, the equations used to compute the flow quantities of interest are given, and sample calculated results that encompass the operating conditions of the TDT are shown.

Kvaternik, Raymond G.↗
NASA NTRS1988

An improved flux-split algorithm applied to hypersonic flows in chemical equilibrium

An explicit, finite-difference, shock-capturing numerical algorithm is presented and applied to hypersonic flows assumed to be in thermochemical equilibrium. Real-gas chemistry is either loosely coupled to the gasdynamics by way of a Gibbs free energy minimization package or fully coupled using species mass conservation equations with finite-rate chemical reactions. A scheme is developed that maintains stability in the explicit, finite-rate formulation while allowing relatively high time steps. The codes use flux vector splitting to difference the inviscid fluxes and employ real-gas corrections to viscosity and thermal conductivity. Numerical results are compared against existing ballistic range and flight data. Flows about complex geometries are also computed.

Palmer, Grant↗
NASA NTRS1989

Progress on a Taylor weak statement finite element algorithm for high-speed aerodynamic flows

A new finite element numerical Computational Fluid Dynamics (CFD) algorithm has matured to the point of efficiently solving two-dimensional high speed real-gas compressible flow problems in generalized coordinates on modern vector computer systems. The algorithm employs a Taylor Weak Statement classical Galerkin formulation, a variably implicit Newton iteration, and a tensor matrix product factorization of the linear algebra Jacobian under a generalized coordinate transformation. Allowing for a general two-dimensional conservation law system, the algorithm has been exercised on the Euler and laminar forms of the Navier-Stokes equations. Real-gas fluid properties are admitted, and numerical results verify solution accuracy, efficiency, and stability over a range of test problem parameters.

Baker, A. J.↗
NASA NTRS2011

Establishing Approaches to Modeling the Ares I-X and Ares I Roll Control System with Free-stream Interaction

Approaches were established for modeling the roll control system and analyzing the jet interactions of the activated roll control system on Ares-type configurations using the USM3D Navier-Stokes solver. Components of the modeling approach for the roll control system include a choice of turbulence models, basis for computing a dynamic equivalence of the real gas rocket exhaust flow in terms of an ideal gas, and techniques to evaluate roll control system performance for wind tunnel and flight conditions. A simplified Ares I-X configuration was used during the development phase of the roll control system modeling approach. A limited set of Navier-Stokes solutions was obtained for the purposes of this investigation and highlights of the results are included in this paper. The USM3D solutions were compared to equivalent solutions at select flow conditions from a real gas Navier- Stokes solver (Loci-CHEM) and a structured overset grid Navier-Stokes solver (OVERFLOW).

Pao, S. Paul↗
NASA NTRS1972

Application of shock capturing and characteristics methods to shuttle flow fields

The calculation of real gas flows around the space shuttle vehicle can be accomplished by the method of characteristics (MOC) or shock capture technique (SCT). Results obtained with these methods for an early orbiter shape proposed by the North American Rockwell Corporation and also for the more recent 040A configuration suggested by NASA-MSC are presented. Results obtained with the SCT code demonstrate its three-dimensional, multiple shock capturing capability while results obtained with the MOC code demonstrate the calculation of equilibrium real gas flows and the determination of flow variables required for a heating analysis.

Kutler, P.↗
NASA NTRS1983

Explanation of the hypersonic longitudinal stability problem: Lessons learned

Inviscid and viscous CFD codes have been applied to a modified Space Shuttle orbiter geometry to investigate differences between preflight aerodynamic predictions and aerodynamic data from hypersonic reentry flight. Flow field solutions were obtained for wind tunnel conditions and flight conditions to assess Mach number, real-gas, and viscous effects on the reentry aerodynamics of the orbiter. Based on the CFD studies, a methodology model has been developed to (1) extrapolate wind tunnel data to flight conditions and (2) calculate a DCM for use with the Aerodynamic Design Data Book. Comparisons are made with selected flight data. Results of the study indicate that the differences between flight and pre-STS-1 predictions of hypersonic pitching moment are primarily due the to Mach number and real-gas effects.

Griffith, B. J.↗
NASA NTRS1985

Experimental aerodynamic coefficients on a Shuttle-like vehicle at Mach 6 and 10 and comparison to prediction

Aerodynamic coefficients measured for an Orbiter-like configuration are presented for a range of angle of attack from 15 deg to 45 deg at Mach 6 and 10. The low-gamma aspect of a real gas on aerodynamic characteristics and shock detachment distance were simulated by testing this configuration in Mach 6 air (freestream gamma equal to 1.4) and Mach 6 CF4 (freestream gamma equal to 1.17). The effects of Mach number, Reynolds number, and gamma on these measurements are examined and comparisons made to an inviscid flowfield computer code known as HALIS. Pitching-moment coefficients measured in CF4 revealed a nose-up increment when compared with measurements in perfect air, indicative of real-gas effects. In general, the HALIS code accurately predicted the measured aerodynamic coefficients in air and CF4.

Micol, J. R.↗
NASA NTRS1991

Computational aspects of chemically reacting flows

An implicit, time-dependent approach is taken to solve the inviscid conservative equations in a vertex-based finite-volume formulation. The convective fluxes are estimated by a modified Riemann solver, and higher-order accuracy is obtained by means of the MUSCL. Implicit techniques are adopted to deal with the equation stiffness as a result of the clustered grid and chemical source term. The real-gas Roe matrix and the ADI and LU schemes have been tested on the sample problems: hypersonic flow over blunt configurations, such as the forebody of a double ellipse, and the near wake of a conic aerobrake. Temperature distribution and standoff distance are validated against the shock-fitting, central-differencing results. Equilibrium temperature may be recovered by artificially increasing the chemical rates at the wall. The present method satisfactorily resolves the flow structure, including the strong expansion behind the flat base. The relative merits and performance of the real-gas TVD and implicit schemes are discussed briefly.

Li, C. P.↗
NASA NTRS1997

Survey of Aerothermodynamics Facilities Useful for the Design of Hypersonic Vehicles Using Air-Breathing Propulsion

The dream of producing an air-breathing, hydrogen fueled, hypervelocity aircraft has been before the aerospace community for decades. However, such a craft has not yet been realized, even in an experimental form. Despite the simplicity and beauty of the concept, many formidable problems must be overcome to make this dream a reality. This paper summarizes the aero/aerothermodynamic issues that must be addressed to make the dream a reality and discusses how aerothermodynamics facilities and their modem companion, real-gas computational fluid dynamics (CFD), can help solve the problems blocking the way to realizing the dream. The approach of the paper is first to outline the concept of an air-breathing hypersonic vehicle and then discuss the nose-to-tail aerothermodynamics issues and special aerodynamic problems that arise with such a craft. Then the utility of aerothermodynamic facilities and companion CFD analysis is illustrated by reviewing results from recent United States publications wherein these problems have been addressed. Papers selected for the discussion have k e n chosen such that the review will serve to survey important U.S. aero/aerothermodynamic real gas and conventional wind tunnel facilities that are useful in the study of hypersonic, hydrogen propelled hypervelocity vehicles.

Arnold, James O.↗
DOE OSTI2025

Characterization and Stimulation of Selenium Reducing Microbial Consortia from Real Flue Gas Desulfurization Wastewater Biological Treatment System

Selenium is released into the environment via anthropogenic activities such as coal combustion. The U.S. Environmental Protection Agency’s Effluent Limitation Guideline (ELG) Rule limits the release of selenium species into U.S. waterways. To meet the ELG limit for selenium, coal-fired power plants must treat the wastewater produced by the flue gas desulfurization (FGD) systems. Selenium removal is of interest because small changes of the concentrations of selenium in the environment can cause detrimental ecological consequences. Biological treatment is used to remediate this wastewater, but little is known about the individual species in the microbial consortium that reduce toxic water-soluble selenium oxyanions to insoluble elemental selenium. To optimize current biological treatment capabilities of this water, the selenium-reducing capabilities must be leveraged. In order to do so, the selenium-reducing bacteria (SeRB) in biological treatment systems must be characterized. This study will be the first to characterize the microbial consortia from a real FGD WW biological treatment system and provide insights on how to better achieve selenium removal via biological treatment. This work will provide insights into the microorganisms predominantly responsible for the reduction of selenium oxyanions in FGD wastewater biological treatment systems, which can be used to better optimize more efficient biological treatment strategies of this industrial waste.

geomicrobiology↗
NASA NTRS1997

Transition and Turbulence Modeling for Blunt-Body Wake Flows

Aerobraking has been proposed as an efficient means of decelerating spacecraft for planetary missions. Most current aerobrake designs feature a blunt forebody shielding the payload from the intense heat generated during atmospheric entry. Although this forebody will absorb the largest portion of the heat pulse, accurate prediction of heating in the near wake is of great importance, since large local heating values can occur at points of shear-layer impingement. In order to address the various issues associated with these blunt-body wake flowfields, the Advisory Group for Aerospace Research and Development (AGARD) formed Working Group 18 in 1992. One of the objectives of this activity was to examine real-gas effects in high-speed flow fields around a 70 deg. blunted cone. To date, many researchers have conducted experiments using this geometry in various facilities, such as the Large Energy National Shock (LENS) tunnel at Cubric/Calspan and the HEG shock tunnel at DLR-Goettingen. Several computational studies have also been conducted in concert with these tests. Many of the experimental results have indicated the possible presence of a transitional shear layer through a large increase in heat transfer downstream of the reattachment point. The presence of transition could in fact lead to much higher peak heating than if the separated flow is entirely laminar or turbulent. In the shock-tunnel tests, however, it is difficult to separate such viscous-flow phenomena from real-gas effects. In order to help make this distinction, Horvath et al. recently conducted a set of experiments in the NASA Langley 20-Inch Mach 6 Tunnel, and compared the results to laminar Navier-Stokes calculations. They found heat-transfer distributions similar to those obtained in the high-enthalpy facilities, with the measured peak heating along the sting support markedly greater than that predicted by the laminar computations. These trends point to the need to find transitional and turbulent computational solutions for these flowfields.

Nance, Robert P.↗
DOE OSTI2022

Two-dimensional quantum gas with real time control of complete Hamiltonian (Final Report)

We developed a novel quantum platform with the complete capability to control individual atoms and their mutual interactions in real time. Ultracold atoms are employed since they have the lowest temperature and decoherence. This system is the ultimate dream of quantum physicists where the Hamiltonian of every single atom, including its kinetic energy, potential energy, and interactions, can be independently programmed in real time. We also initiated a new theoretical collaboration to explore its full potential.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Characterization of Microbial Consortia and the Products Associated with Selenium Reduction in Real Flue Gas Desulfurization (FGD) Wastewater

Biological treatment is a recognized approach for removing toxic selenate and selenite oxyanions present in flue gas desulfurization (FGD) wastewater. However, the knowledge on the specific microbial species or communities responsible for reducing water-soluble selenium oxyanions to insoluble elemental selenium remains limited. In addition, the selenium oxyanion reduction genes and pathways have yet to be understood in these wastewaters. This study characterizes selenium oxyanion reducing bacteria (SeRB) native to FGD wastewater, and the resulting elemental selenium particles formed. By selecting for native SeRB microbes in a defined media, a novel resolution of these organisms has been achieved. This research identifies previously unrecognized selenium oxyanion reducing capabilities in Anaerosolibacter, alongside predominant SeRB from Mesobacillus and Tepidibacillus genera. This work encompasses both 16S and metagenomic techniques to recover novel metagenome assembled genomes (MAGs), distinct to this environment. The biogenic selenium produced by these organisms were predominantly of elemental selenium, in either amorphous or with a hexagonal structure. In addition, the elemental selenium particles formed where shown to increase in purity as the microbes were enriched. This study identifies the SeRB present in FGD wastewater and characterizes their selenium products, offering crucial insights to enhance the efficiency of biological treatment strategies and the potential of selenium recovery from this industrial waste.

microbiology↗