Search NASA⌕ Search

SEARCH · Search NASA

Results for “recombination layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Thermally-restorable optical degradation and the mechanism of current transport in Cu2S-CdS photovoltaic cells

The photovoltaic properties of single-crystal Cu2S-CdS heterojunctions have been investigated as a function of heat treatment by detailed measurements of the dependence of short-circuit current on photon energy, temperature, and the state of optical degradation or enhancement. A coherent picture is formulated for the relationship between enhancement and optical degradation, and their effect on the transport of short-circuit photoexcited current and dark, forward-bias current in the cell. Optical degradation in the Cu2S-CdS cell is shown to be closely identical to optical degradation of lifetime in a homogeneous CdS:Cd:Cu crystal, indicating that the CdS:Cu layer near the junction interface controls carrier transport in the cell. It is proposed that both the photoexcited short-circuit current and the dark, forward-bias current are controlled by a tunneling-recombination process through interface states.

Fahrenbruch, A. L.↗
NASA NTRS1984

Effect of reabsorbed recombination radiation on the saturation current of direct gap p-n junctions

The application of the radiative transfer theory for semiconductors to p-n homojunctions subject to low level injection conditions is discussed. By virtue of the interaction of the radiation field with free carriers across the depletion layer, the saturation current density in Shockley's expression for the diode current is reduced at high doping levels. The reduction, due to self-induced photon generation, is noticeable for n-type material owing to the small electron effective mass in direct band-gap III-V compounds. The effect is insignificant in p-type material. At an equilibrium electron concentration of 2 x 10 to the 18th/cu cm in GaAs, a reduction of the saturation current density by 15 percent is predicted. It is concluded that realistic GaAs p-n junctions possess a finite thickness.

Von Roos, O.↗
NASA NTRS1985

The unexpected ultraviolet variability of Herbig-Haro object 1

The line fluxes of the C IV 1550 A and semiforbidden C III 1909 A emission lines in HH 1 are noted to have monotonically decreased by factors of 4-6 between 1979 and 1983, despite a lack of indications of optical range changes. The thickness of the shocked layers and preshock density can be estimated on the basis of these rapid changes, with results suggesting a clumpy medium that leads to truncated shock waves with column densities insufficient for the development of complete recombination zones.

Brugel, E. W.↗
NASA NTRS2012

High Enthalpy Studies of Capsule Heating in an Expansion Tunnel Facility

Measurements were made on an Orion heat shield model to demonstrate the capability of the new LENS-XX expansion tunnel facility to make high quality measurements of heat transfer distributions at flow velocities from 3 km/s (h(sub 0) = 5 MJ/kg) to 8.4 km/s (h(sub 0) = 36 MJ/kg). Thirty-nine heat transfer gauges, including both thin-film and thermocouple instruments, as well as four pressure gauges, and high-speed Schlieren were used to assess the aerothermal environment on the capsule heat shield. Only results from laminar boundary layer runs are reported. A major finding of this test series is that the high enthalpy, low-density flows displayed surface heating behavior that is observed to be consistent with some finite-rate recombination process occurring on the surface of the model. It is too early to speculate on the nature of the mechanism, but the response of the gages on the surface seems generally repeatable and consistent for a range of conditions. This result is an important milestone in developing and proving a capability to make measurements in a ground test environment and extrapolate them to flight for conditions with extreme non-equilibrium effects. Additionally, no significant, isolated stagnation point augmentation ("bump") was observed in the tests in this facility. Cases at higher Reynolds number seemed to show the greatest amount of overall increase in heating on the windward side of the model, which may in part be due to small-scale particulate.

Dufrene, Aaron↗
NASA NTRS1990

Estimation of minority carrier diffusion lengths in InP/GaAs solar cells

Minority carrier diffusion length is one of the most important parameters affecting the solar cell performance. An attempt is made to estimate the minority carrier diffusion lengths is the emitter and base of InP/GaAs heteroepitaxial solar cells. The PC-1D computer model was used to simulate the experimental cell results measured at NASA Lewis under AMO (air mass zero) spectrum at 25 C. A 16 nm hole diffusion length in the emitter and a 0.42 micron electron diffusion length in the base gave very good agreement with the I-V curve. The effect of varying minority carrier diffusion lengths on cell short current, open circuit voltage, and efficiency was studied. It is also observed that the front surface recombination velocity has very little influence on the cell performance. The poor output of heteroepitaxial cells is caused primarily by the large number of dislocations generated at the interfaces that propagate through the bulk indium phosphide layers. Cell efficiency as a function of dislocation density was calculated and the effect of improved emitter bulk properties on cell efficiency is presented. It is found that cells with over 16 percent efficiencies should be possible, provided the dislocation density is below 10(exp 6)/sq cm.

Jain, R. K.↗
NASA NTRS1974

Surface /catalytic/ reactions on upper atmospheric aerosols

Highly reactive minor species and aerosol layers are present together at times in certain regions of the upper atmosphere. It is suggested that this interplay may lead to surface reactions that could affect the local photochemical balance. A simple model of the surface recombination of atomic oxygen at the mesopause, incorporating rough estimates of aerosol concentrations, is used to estimate the importance of this effect. Surface recombination does appear to be significant in comparison with gas phase recombination for atomic oxygen; however, major uncertainties remain in the model.

Olivero, J. J.↗
NASA NTRS1970

An investigation of the ionospheric D region at sunrise

The growth over sunrise of the C and D layers of the ionosphere is investigated. The model which is analyzed includes the negative ion species O(-), O2(-), O3(-), O4(-), NO3(-), CO3(-), and CO4(-). Ionization sources due to galactic cosmic rays, precipitated electrons, ionization of NO by scattered Lyman alpha radiation, and the direct solar radiation ionization are also included. The photodetachment of most of the negative ions is discussed, as well as the time variation of these parameters. The time variations of the electron, negative ion, and positive ion densities are calculated over sunrise. From these data, the mesospheric C and D layer development is plotted. Several model parameters are varied until the best agreement with experimentally determined electron densities is obtained. The results are discussed in light of several atmospheric parameters including the O and NO concentrations and the electron-ion recombination coefficient.

Turco, R. P.↗
NASA NTRS1973

Metallic ions in the equatorial ionosphere.

Four positive ion composition measurements of the equatorial E region at Thumba, India, are presented. During the day, the major ions between 90 and 125 km are NO+ and O2+. The relative concentrations are similar to those observed at midlatitudes but exhibit unusual structural behavior with altitude. A metallic ion layer centered at 92 km is found to contain Mg+, Fe+, Ca+, K+, Al+, Na+, and possibly Si+ ions. The layer is explained in terms of a similarly shaped altitude distribution of neutral atoms that are photoionized and charge exchanged with NO+ and O2+. Three-body reactions form molecular metallic ions that are rapidly lost by dissociative ion-electron recombination.

Aikin, A. C.↗
NASA NTRS1982

Results of a flight experiment on the catalytic efficiency of the Space Shuttle heat shield

An experiment was performed on the second Space Shuttle flight to verify data from arc-heated wind-tunnel tests indicating that the thermal protection tiles used on the Shuttle's surface are noncatalytic to the recombination of dissociated air. The experiment indicates that the tiles are indeed noncatalytic, and explains the lower than expected temperatures observed in the first two Shuttle flights. The data are reasonably well predicted with computations, using a chemically reactive boundary-layer code. The experimental setup and the computational analysis are described.

Rakich, J. V.↗
NASA NTRS1993

Numerical solution of wave equations for the stability of the inner cometo-sheath

Numerical solution of the MHD wave equations for stability of the cometary sheath determined by the balance between the inward Lorentz body force and the outward ion-neutral drag force is obtained by using a two-point boundary value method. The eigenvalues and the eigenfunctions are obtained numerically by treating the cometary inner sheath as a layer of finite thickness, bounded by the contact surface, i.e., the diamagnetic cavity boundary. The magnetic field structure discovered in the ionosphere of Comets Halley and Giacobini-Zinner is found to be unstable. The effects of finite plasma pressure, dissociative recombination, and mass loading due to photoionization are found to be stabilizing but are unable to quench the instability completely. It is also found that the higher the neutral production rate the lesser is the growth rate for the instability.

Srivastava, Krishna M.↗
NASA NTRS1976

Experimental investigation of the excess charge and time constant of minority carriers in the thin diffused layer of 0.1 Ohm-cm silicon solar cells

The observed low open-circuit voltage in 0.1 Ohm-cm solar cells is probably related to an excessively high diode saturation current. Theoretical studies conducted by Lindholm et al. (1975) and by Godlewski et al. (1975) have shown that a high saturation current could be produced by either high recombination rates or bandgap narrowing effects. A description is given of an investigation which shows that bandgap narrowing effects have a first order significance in determining the charge carrier transport controlling the open-circuit voltage of 0.1 Ohm-cm silicon solar cells.

Godlewski, M. P.↗
NASA NTRS1981

Determination of lifetimes and recombination currents in p-n junction solar cells, diodes, and transistors

New methods are presented and illustrated that enable the accurate determination of the diffusion length of minority carriers in the narrow regions of a solar cell or a diode. Other methods now available are inaccurate for the desired case in which the width of the region is less than the diffusion length. Once the diffusion length is determined by the new methods, this result can be combined with measured dark I-V characteristics and with small-signal admittance characteristics to enable determination of the recombination currents in each quasi-neutral region of the cell - for example, in the emitter, low-doped base, and high-doped base regions of the BSF (back-surface-field) cell. This approach leads to values for the effective surface recombination velocity of the high-low junction forming the back-surface field of BSF cells or the high-low emitter junction of HLE cells. These methods are also applicable for measuring the minority-carrier lifetime in thin epitaxial layers grown on substrates with opposite conductivity type.

Neugroschel, A.↗
NASA NTRS1984

Temperature-dependent reaction-rate expression for oxygen recombination at Shuttle entry conditions

A temperature-dependent oxygen surface reaction-rate coefficient has been determined from experimental STS-2 heating and wall temperature data at altitudes of 77.91 km, 74.98 km, and 71.29 km. The coefficient is presented in an Arrhenius form and is shown to be less temperature dependent than previous results. Finite-rate viscous-shock-layer heating rates based on this present expression have been compared with predicted heating rates using the previous rate coefficients and with experimental heating data obtained over an extensive range of STS-2 and STS-3 entry conditions. A substantial improvement is obtained in comparison of experimental data and predicted heating rates using the present oxygen reaction-rate expression.

Zoby, E. V.↗
NASA NTRS1986

Spatial resolution and nature of defects produced by low-energy proton irradiation of GaAs solar cells

AlGaAs/GaAs solar cells with about 0.5-micron-thick Al(0.85)Ga(0.15)As window layers were irradiated using isotropic and normal incidence protons having energies between 50 and 500 keV with fluences up to 1 x 10 to the 12th protons/sq cm. Although the projected range for these protons varies from 0 to more than 4.5 microns, the recombination losses due to the irradiation-induced defects were observed to be maximum in the vicinity of the AlGaAs/GaAs interface and the space-charge region irrespective of the proton energy. This was found by analyzing spectral response measurements. The results are explained by using a model in which the interaction of as-grown dislocations with irradiation-induced point defects is considered.

Kachare, R.↗
NASA NTRS1985

Superstructures and multijunction cells for high efficiency energy conversion

Potential applications of superlattices to photovoltaic structures are discussed. A single-bandgap, multijunction cell with selective electrodes for lateral transport of collected carriers is proposed. The concept is based on similar doping superlattice (NIPI) structures. Computer simulations show that by reducing bulk recombination losses, the spectral response of such cells is enhanced, particularly for poor quality materials with short diffusion lengths. Dark current contributions of additional junctions result in a trade-off between short-circuit current and open-circuit voltage as the number of layers is increased. One or two extra junctions appear to be optimal.

Wagner, M.↗
NASA NTRS1991

Making Ultrathin Solar Cells

Process produces extremely thin silicon solar cells - only 50 micrometers or less in thickness. Electrons and holes have less opportunity to recombine before collected at cell surfaces. Efficiency higher and because volume of silicon small, less chance of radiation damage in new cells. Initial steps carried out at normal thickness to reduce breakage and avoid extra cost of special handling. Cells then thinned mechanically and chemically. Final cell includes reflective layer on back surface. Layer bounces unabsorbed light back into bulk silicon so it absorbs and produces useful electrical output.

Cogan, George W.↗
NASA NTRS2006

BLIMPK/Streamline Surface Catalytic Heating Predictions on the Space Shuttle Orbiter

This paper describes the results of an analysis of localized catalytic heating effects to the U.S. Space Shuttle Orbiter Thermal Protection System (TPS). The analysis applies to the High-temperature Reusable Surface Insulation (HRSI) on the lower fuselage and wing acreage, as well as the critical Reinforced Carbon-Carbon on the nose cap, chin panel and the wing leading edge. The object of the analysis was to use a modified two-layer approach to predict the catalytic heating effects on the Orbiter windward HRSI tile acreage, nose cap, and wing leading edge assuming localized highly catalytic or fully catalytic surfaces. The method incorporated the Boundary Layer Integral Matrix Procedure Kinetic (BLIMPK) code with streamline inputs from viscous Navier-Stokes solutions to produce heating rates for localized fully catalytic and highly catalytic surfaces as well as for nominal partially catalytic surfaces (either Reinforced Carbon-Carbon or Reaction Cured Glass) with temperature-dependent recombination coefficients. The highly catalytic heating results showed very good correlation with Orbiter Experiments STS-2, -3, and -5 centerline and STS-5 wing flight data for the HRSI tiles. Recommended catalytic heating factors were generated for use in future Shuttle missions in the event of quick-time analysis of damaged or repaired TPS areas during atmospheric reentry. The catalytic factors are presented along the streamlines as well as a function of stagnation enthalpy so they can be used for arbitrary trajectories.

Marichalar, Jeremiah J.↗
NASA NTRS1979

The prediction of two-dimensional airfoil stall progression

A generalized boundary condition potential flow calculation method was combined with a momentum integral boundary layer method and a base flow theory of separation to predict airfoil viscous-inviscid interference up to and beyond stall. The resultant program considers laminar and turbulent separation and is, therefore, applicable to thin or thick airfoil stall. The calculated flow field includes the airfoil and the separation bubble recombination region behind the airfoil. Calculated pressure distributions and equivalent airfoil shapes, including the displacement thickness of the viscous regions, are compared with flow field measurements for several airfoils. The measured displacement thicknesses and wake centerlines corroborate the calculated shape. The comparison also suggests the use of the analytical solution to evaluate the measurements.

Gross, L. W.↗