Search NASA⌕ Search

SEARCH · Search NASA

Results for “response theory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Effect of damage on elastically tailored composite laminates

A variationally consistent theory is derived in order to predict the response of anisotropic thin-walled closed sections subjected to axial load, torsion and bending. The theory is valid for arbitrary cross-sections made of laminated composite materials with variable thickness and stiffness. Closed form expressions for the stiffness coefficients are provided as integrals in terms of lay-ups parameters and cross-sectional geometry. A comparison of stiffness coefficients and response with finite element predictions and a closed form solution is performed. The theory is applied to the investigation of the effect of damage on the extension-twist coupling in a thin-walled closed section beam. The damage is simulated as a progressive ply-by-ply failure. Results show that damage can have a significant effect on the extension-twist coupling.

Armanios, Erian↗

Temperature dependent nonlinear metal matrix laminae behavior

An analytical method is described for computing the nonlinear thermal and mechanical response of laminated plates. The material model focuses upon the behavior of metal matrix materials by relating the nonlinear composite response to plasticity effects in the matrix. The foundation of the analysis is the unidirectional material model which is used to compute the instantaneous properties of the lamina based upon the properties of the fibers and matrix. The unidirectional model assumes that the fibers properties are constant with temperature and assumes that the matrix can be modelled as a temperature dependent, bilinear, kinematically hardening material. An incremental approach is used to compute average stresses in the fibers and matrix caused by arbitrary mechanical and thermal loads. The layer model is incorporated in an incremental laminated plate theory to compute the nonlinear response of laminated metal matrix composites of general orientation and stacking sequence. The report includes comparisons of the method with other analytical approaches and compares theoretical calculations with measured experimental material behavior. A section is included which describes the limitations of the material model.

Barrett, D. J.↗

Vibroacoustic Response of Pad Structures to Space Shuttle Launch Acoustic Loads

This paper presents a deterministic theory for the random vibration problem for predicting the response of structures in the low-frequency range (0 to 20 hertz) of launch transients. Also presented are some innovative ways to characterize noise and highlights of ongoing test-analysis correlation efforts titled the Verification Test Article (VETA) project.

Margasahayam, R. N.↗

Validation of a Deterministic Vibroacoustic Response Prediction Model

This report documents the recently completed effort involving validation of a deterministic theory for the random vibration problem of predicting the response of launch pad structures in the low-frequency range (0 to 50 hertz). Use of the Statistical Energy Analysis (SEA) methods is not suitable in this range. Measurements of launch-induced acoustic loads and subsequent structural response were made on a cantilever beam structure placed in close proximity (200 feet) to the launch pad. Innovative ways of characterizing random, nonstationary, non-Gaussian acoustics are used for the development of a structure's excitation model. Extremely good correlation was obtained between analytically computed responses and those measured on the cantilever beam. Additional tests are recommended to bound the problem to account for variations in launch trajectory and inclination.

Caimi, Raoul E.↗

Modelling Greenland Outlet Glaciers

The objective of this project was to develop simple yet realistic models of Greenland outlet glaciers to better understand ongoing changes and to identify possible causes for these changes. Several approaches can be taken to evaluate the interaction between climate forcing and ice dynamics, and the consequent ice-sheet response, which may involve changes in flow style. To evaluate the icesheet response to mass-balance forcing, Van der Veen (Journal of Geophysical Research, in press) makes the assumption that this response can be considered a perturbation on the reference state and may be evaluated separately from how this reference state evolves over time. Mass-balance forcing has an immediate effect on the ice sheet. Initially, the rate of thickness change as compared to the reference state equals the perturbation in snowfall or ablation. If the forcing persists, the ice sheet responds dynamically, adjusting the rate at which ice is evacuated from the interior to the margins, to achieve a new equilibrium. For large ice sheets, this dynamic adjustment may last for thousands of years, with the magnitude of change decreasing steadily over time as a new equilibrium is approached. This response can be described using kinematic wave theory. This theory, modified to pertain to Greenland drainage basins, was used to evaluate possible ice-sheet responses to perturbations in surface mass balance. The reference state is defined based on measurements along the central flowline of Petermann Glacier in north-west Greenland, and perturbations on this state considered. The advantage of this approach is that the particulars of the dynamical flow regime need not be explicitly known but are incorporated through the parameterization of the reference ice flux or longitudinal velocity profile. The results of the kinematic wave model indicate that significant rates of thickness change can occur immediately after the prescribed change in surface mass balance but adjustments in flow rapidly diminish these rates to a few cm/yr at most. The time scale for adjustment is of the order of a thousand years or so.

vanderVeen, Cornelis↗

Response of middle atmosphere to short-term solar ultraviolet variations. I - Observations. II - Theory

The effects of solar UV variability on ozone and temperature are studied using Nimbus 7 stratospheric and mesospheric ozone, temperature, and 205-nm solar UV data, and Solar Mesosphere Explorer 1.27-micron ozone and 121.6-nm solar UV data. Consideration is given to the temperature/UV relation, the O3/UV relation with and without temperature feedback, and the responses of HNO3 and NO2 to solar UV variability. It is observed that the response times of temperature to solar UV variability are 6 days at 2 mbar and 1 day at 0.01 mbar. The stratospheric ozone response (with no correction for temperature effects) increases, while in the mesosphere a decrease is detected. The responses of ozone and temperature to solar variability are examined and calculated using a one-dimensional chemical-radiative time-dependent model. The comparison of the model results with the satellite-observed responses reveals generally good correlation between the data; however, the model predicts a larger time lag of the temperature response and a larger stratospheric HNO3 mixing ratio than the satellite data. It is noted that the relation between short-term variations in the solar UV radiation and stratospheric ozone is affected by the coupling between ozone and temperature.

Keating, G. M.↗

Convergence of finite difference transient response computations for thin shells.

Numerical studies pertaining to the limits of applicability of the finite difference method in the solution of linear transient shell response problems are performed, and a computational procedure for the use of the method is recommended. It is found that the only inherent limitation of the finite difference method is its inability to reproduce accurately response discontinuities. This is not a serious limitation in view of natural constraints imposed by the extension of Saint Venant's principle to transient response problems. It is also found that the short wavelength limitations of thin shell (Bernoulli-Euler) theory create significant convergence difficulties in computed response to certain types of transverse excitations. These difficulties may be overcome, however, through proper selection of finite difference mesh dimensions and temporal smoothing of the excitation.

Sobel, L. H.↗

Control theory handbook

Motion equations and basic control theory applied to stability and response analyses of flexible launch vehicle using unified coordinate system and notation

COORDINATE SYSTEM↗

PAET entry heating and heat protection experiment.

A description is given of the thermal characterization of two low-density (270 and 450 kg/cu cm) elastomeric silicone ablators determined during the entry of the NASA Ames Planetary Atmosphere Experiments Test (PAET) vehicle into the earth's atmosphere. The spacecraft configuration, entry parameters, and associated trajectory variables are presented. Measurements of both the surface convective heat transfer rate and pressure on the beryllium nose cap are shown to be within 5% of theory. The predicted and measured internal temperatures are compared at various depths in the forebody and afterbody heat shields. Significant differences observed between experiment and theory for the afterbody thermal response are examined in relation to existing laboratory data.

Vojvodich, N. S.↗

The pseudonoise test set: Communication system's performance evaluation based upon RMS error testing

A pseudonoise (PN) test set was built to provide a relatively easy means of accurately determining the end-to-end rms error introduced by a communication system when subjected to wideband data. It utilizes a filtered pseudorandom sequence generator as a wideband data source, providing a convenient means for digitally delaying the input reference signal for comparison with the distorted test communication system output. In addition to providing a means to measure the end-to-end rms error and the average delay of a communication system, the PN test set also provides a means to determine the tested system's impulse response and correlation function. The theory of PN testing is discussed in detail along with the most difficult aspects of implementation, the building of matched filter pairs. Both analytical and empirical results are reported which support the contentions that this is an accurate and practical way to acquire figures of merit for complete communication systems.

Wallace, G. R.↗

Pulse height response of an optical particle counter to monodisperse aerosols

The pulse height response of a right angle scattering optical particle counter has been investigated using monodisperse aerosols of polystyrene latex spheres, di-octyl phthalate and methylene blue. The results confirm previous measurements for the variation of mean pulse height as a function of particle diameter and show good agreement with the relative response predicted by Mie scattering theory. Measured cumulative pulse height distributions were found to fit reasonably well to a log normal distribution with a minimum geometric standard deviation of about 1.4 for particle diameters greater than about 2 micrometers. The geometric standard deviation was found to increase significantly with decreasing particle diameter.

Wilmoth, R. G.↗

Studies of silicon p-n junction solar cells

Single crystal silicon p-n junction solar cells made with low resistivity substrates show poorer solar energy conversion efficiency than traditional theory predicts. The physical mechanisms responsible for this discrepancy are identified and characterized. The open circuit voltage in shallow junction cells of about 0.1 ohm/cm substrate resistivity is investigated under AMO (one sun) conditions.

Lindholm, F. A.↗

Effects of moisture profiles and laminate configuration on the hygro stress in advanced composites

A theoretical investigation was performed using a recently developed integrated theory for predicting the hygrothermomechanical response to investigate the effects of three different moisture profiles on the ply hygro stresses in angleplied laminates. The moisture profiles were linear, parabolic and hyperbolic varying from 1 percent at the exposed ply to '0' percent in the protected ply. The angleplied laminates were of two generic configurations. The results obtained are summarized graphically to illustrate the effects of both moisture profile and laminate configuration.

Chamis, C. C.↗

Random array grid collimators

The paper presents a general theory which predicts the angular response of a random array grid collimator (RAGC). Attention is given to two problems with pure random arrays: (1) there are strong wings in the response function and (2) the patterns are not self-supporting. The paper suggests restrictions on the randomness of the pattern which eliminate such problems with the disadvantage of putting an upper limit on the available throughput. It is reported that even in the worst case, the upper limit for a two-dimensional collimator is as high as 23%. Finally, suggestions are presented for easing the fabrication effort of the grids.

Fenimore, E. E.↗

Kelvin wave packets and flow acceleration - A comparison of modeling and observations

Atmospheric Kelvin waves, as revealed by temperatures obtained from the recent Limb Infrared Monitor of the Stratosphere (LIMS) experiment, commonly occur in packets. A simple two-dimensional gravity-wave model is used to study the upward propagation of these packets through different zonal mean wind profiles derived from the LIMS data. The observed prevalence of high frequency waves in the lower mesosphere and low frequency waves in the lower stratosphere can be exlained by dispersion of energy associated with the range of frequencies comprising a packet. Dominant wave frequencies at upper and lower levels are more distinctly separated if the packet propagates through a layer of westerly winds. Due to dispersion and shear effects, a packet of short temporal length at low levels will have a considerably extended impact on a layer of westerly winds at higher levels. Observed and modeled westerly accelerations resulting from packet absorption occur in the same layer, and are similar in magnitude and duration. These results support the theory that Kelvin waves are responsible for the westerly phase of the semiannual oscillation.

Coy, L.↗

Life sciences and space research XXIV(1) - Gravitational biology; Proceedings of Symposia 10 and 13 of the Topical Meeting of the Interdisciplinary Scientific Commission F (Meetings F1 and F2) of the COSPAR 28th Plenary Meeting, The Hague, Netherlands, June 25-July 6, 1990

Topics presented include an introduction to theories and models of biological response to gravity, gravity effects on biological systems, the function of calcium in plant graviperception, developmental biology on unmanned spacecraft, and the effect of microgravity on the development of plant protoplasts flown on Biocosmos 9. Also presented are the mechanism by which an asymmetric distribution of plant growth hormone is attained, the perception of gravity by plants, an animal research facility for Space Station Freedom, the long-term effects of microgravity and possible countermeasures, and an experimental system for determining the influence of microgravity on B lymphocyte activation and cell fusion.

Young, R. S.↗