Search NASA⌕ Search

SEARCH · Search NASA

Results for “reverse rates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Calibration and validation of the foundation for a multiphase strength model for tin

In this work, the Common Model of Multi-phase Strength and Equation of State (CMMP) model was applied to tin. Specifically, calibrations of the strength-specific elements of the CMMP foundation were developed with a combination of experiments and theory, and then the model was validated experimentally. The first element of the foundation is a multi-phase analytic treatment of the melt temperature and the shear modulus for the solid phases. These models were parameterized for each phase based on ab initio calculations using the software VASP (Vienna Ab initio Simulations Package) based on density functional theory. The shear modulus model for the ambient phase was validated with ultrasonic sound speed measurements as a function of pressure and temperature. The second element of the foundation is a viscoplastic strength model for the phase, upon which strength for inaccessible higher-pressure phases can be scaled as necessary. The stress–strain response of tin was measured at strain rates of 10 -3 to 3 x 10 3 s -1 and temperatures ranging from 87 to 373 K. The Preston–Tonks–Wallace (PTW) strength model was fit to that data using Bayesian model calibration. For validation, six forward and two reverse Taylor impact experiments were performed at different velocities to measure large plastic deformation of tin at strain rates up to ⁠10 5 s -1 . The PTW model accurately predicted the deformed shapes of the cylinders, with modest discrepancies attributed to the inability of PTW to capture the effects of twinning and dynamic recrystallization. Some material in the simulations of higher velocity Taylor cylinders reached the melting temperature, thus testing the multiphase model because of the presence of a second phase, the liquid. In simulations using a traditional modeling approach, the abrupt reduction of strength upon melt resulted in poor predictions of the deformed shape and non-physical temperatures. With CMMP, the most deformed material points evolved gradually to a mixed solid–liquid but never a fully liquid state, never fully lost strength, stayed at the melt temperature as the latent heat of fusion was absorbed, and predicted the deformed shape well.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Structural Changes and Reversibility Upon Deintercalation of Li from LiCoPO 4 Derivatives

In an effort to improve the cycle life and rate capability of olivine LiCoPO 4 , Cr, Fe, and Si were added to produce nominal Li 1.025 Co 0.84 Fe 0.10 Cr 0.05 Si 0.01 (PO 4 ) 1.025 . This cathode material has an energy density comparable to LiCoPO 4 , with markedly improved electrochemical performance. Here, we apply operando X-ray diffraction to gain an understanding of the crystallographic delithiation mechanism of this new substituted electrode material, compared to both LiCo 0.75 Fe 0.25 PO 4 and LiCo 0.75 Fe 0.25 PO 4 . Throughout charging, the extent of solid-solution domains was significantly increased in Li 1.025 Co 0.84 Fe 0.10 Cr 0.05 Si 0.01 (PO 4 ) 1.025 and LiCo 0.75 Fe 0.25 PO 4 compared to LiCoPO 4 . These domains reduce the mechanical strain during electrode function, providing a clear explanation for the high durability with Co substitution. Li 1.025 Co 0.84 Fe 0.10 Cr 0.05 Si 0.01 (PO 4 ) 1.025 operated at notably higher average potential than LiCo 0.75 Fe 0.25 PO 4 , which would increase the energy density of the cell. Ex situ measurements reveal the persistence of structural irreversibilities in the substituted phase after the first cycle, identifying avenues for further improvement in durability. Overall, this finding sheds light on the strategies for judicious cation substitution in LiCoPO 4 electrodes to maximize the cycle life while preserving high energy density, especially compared to LiFePO 4 .

25 ENERGY STORAGE↗
DOE OSTI2024

Calibration and validation of the foundation for a multiphase strength model for tin

In this work, the Common Model of Multi-phase Strength and Equation of State (CMMP) model was applied to tin. Specifically, calibrations of the strength-specific elements of the CMMP foundation were developed with a combination of experiments and theory, and then the model was validated experimentally. The first element of the foundation is a 10 multi-phase analytic treatment of the melt temperature and the shear modulus for the solid phases. These models were parameterized for each phase based on ab initio calculations using the software VASP (Vienna Ab initio Simulations Package) based on density functional theory (DFT). The shear modulus model for the ambient β phase was validated with ultrasonic sound speed measurements as a function of pressure and temperature. The second element of the foundation is a viscoplastic strength model for the β phase, upon which strength for inaccessible higher-pressure phases can be scaled as necessary. The stress-strain response of tin was measured at strain rates of 10 -3 to 3 x 10 3 s -1 and temperatures ranging from 87 to 373 K. The Preston-Tonks-Wallace (PTW) strength model was fit to that data using Bayesian model calibration. For validation, six forward and two reverse Taylor impact experiments were performed at different velocities to measure large plastic deformation of tin at strain rates up to 10 5 s -1 . The PTW model accurately predicted the deformed shapes of the cylinders, with modest discrepancies attributed to the inability 20 of PTW to capture the effects of twinning and dynamic recrystallization. Some material in the simulations of higher velocity Taylor cylinders reached the melting temperature, thus testing the multiphase model because of the presence of a second phase, the liquid. In simulations using a traditional modeling approach, the abrupt reduction of strength upon melt resulted in poor predictions of the deformed shape and non-physical temperatures. With CMMP, the most deformed material points evolved gradually to a mixed solid-liquid but never fully liquid state, never fully lost strength, 25 stayed at the melt temperature as the latent heat of fusion was absorbed, and predicted the deformed shape well.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Non-topotactic reactions enable high rate capability in Li-rich cathode materials

High-rate cathode materials for Li-ion batteries require fast Li transport kinetics, which typically rely on topotactic Li intercalation/de-intercalation because it minimally disrupts Li transport pathways. In contrast to this conventional view, here we demonstrate that the rate capability in a Li-rich cation-disordered rocksalt cathode can be significantly improved when the topotactic reaction is replaced by a non-topotactic reaction. The fast non-topotactic lithiation reaction is enabled by facile and reversible transition metal octahedral-to-tetrahedral migration, which improves rather than impedes Li transport. Using this concept, we show that high-rate performance can be achieved in Mn- and Ni-based cation-disordered rocksalt materials when some of the transition metal content can reversibly switch between octahedral and tetrahedral sites. Overall, this study provides a new perspective on the design of high-performance cathode materials by demonstrating how the interplay between Li and transition metal migration in materials can be conducive to fast non-topotactic Li intercalation/de-intercalations.

25 ENERGY STORAGE↗
DOE OSTI2024

Fully Scalable Randomized Benchmarking Without Motion Reversal

We introduce , a protocol that streamlines traditional RB by using circuits consisting almost entirely of independent identically distributed (IID) layers of gates. BiRB reliably and efficiently extracts the average error rate of a Clifford gate set by sending tensor-product eigenstates of random Pauli operators through random circuits with IID layers. Unlike existing RB methods, BiRB does not use motion reversal circuits—i.e., circuits that implement the identity (or a Pauli) operator—which simplifies both the method and the theory proving its reliability. Furthermore, this simplicity enables scaling BiRB to many more qubits than the most widely used RB methods. Published by the American Physical Society 2024

Hines, Jordan (ORCID:0000000151267256)↗
DOE OSTI2021

Oxygen redox chemistry in P2-Na 0.6 Li 0.11 Fe 0.27 Mn 0.62 O 2 cathode for high-energy Na-ion batteries

Owing to the abundance of raw material reserves and low cost, Na-ion batteries (NIBs) have successfully gained widespread attention from academic and industrial communities in the past few decades. However, the insufficient cathode energy density is still one of the critical bottlenecks restricting the development of NIBs. Following a strategy of introducing Li+ into the transition-metal (TM) layer to enhance the oxygen redox reaction, a novel layered cathode material P2-Na 0.6 Li 0.11 Fe 0.27 Mn 0.62 O 2 (NLFMO) was designed and successfully synthesized. This NLFMO cathode not only delivers a large initial reversible capacity of 207.3 mA h g -1 , but also shows a good cycling performance (104.2 mA h g -1 after 80 cycles) and rate capability (126.2 mA h g -1 at 1C). The ultrahigh capacity is contributed by both cationic (Fe 3+ /Fe 4+ and Mn 3+ /Mn 4+ ) and partially reversible anionic redox (O 2- /O n- ) reactions, revealed by in situ X-ray absorption spectroscopy (XAS) and X-ray photoelectron spectroscopy (XPS) techniques. Moreover, no detrimental P2–O2 phase transition was observed in ex situ X-ray diffraction (XRD) patterns, confirming the high structural stability during Na + deintercalation/intercalation processes. These results provide valuable information about the high-energy density layered cathode materials based on anionic redox reactions for NIBs.

25 ENERGY STORAGE↗
DOE OSTI2019

Conversion of acenaphthalene to phenalene via methylation: A theoretical study

Ab initio calculations of the C 13 H 10 and C 13 H 9 potential energy surfaces related to the reaction of 1-acenaphthyl and methyl radicals and secondary isomerization of C 13 H 9 primary radical products have been performed at the chemically accurate G3(MP2,CC)//B3LYP/6-311G** level of theory to unravel the mechanism of conversion of acenaphthalene to phenalene or phenalenyl radical + H. The computed energetics and molecular parameters were utilized in Rice-Ramsperger-Kassel-Marcus Master Equation (RRKM-ME) calculations of reaction rate constants and relative product yields. The 1-acenaphthyl + CH 3 reaction is predicted to proceed by a fast radical-radical recombination mechanism and to predominantly produce collisionally stabilized 1-methylacenaphthalene B1 or a C 13 H 9 benzylic radical A1 + H with exothermicities of 106.8 and 25.2 kcal/mol, respectively. The A1 + H channel is preferable at higher temperatures, whereas the stabilization of 1-methylacenaphthalene is favored at higher pressures. The radical A1 can nearly irreversibly interconvert to phenalenyl radical AP via a 22.7 kcal/mol exothermic isomerization process involving formal insertion of the CH 2 group into a C-C bond of the five-member ring leading to the expansion of this ring to a six-member ring. The rate constants for the H addition reaction to phenalenyl radical to form phenalene and the reverse H loss from phenalene were also computed and the strength of the weakest C-H bond in the CH 2 group of phenalene is evaluated as 62.2 kcal/mol. The analysis of the reaction kinetics allowed us to deduce a mechanism for the conversion of 1-acenaphthyl radical to phenalene or phenalenyl radical + H via methylation involving the formation of A1 via a well-skipping channel or stabilization and dissociation of (or H abstraction from) B1 followed by isomerization of A1 to phenalenyl AP, which can add an H atom producing phenalene. As a result, rate constants for the significant elementary reactions are fitted to modified Arrhenius expressions and are proposed for kinetic modeling of the expansion of a five-member ring on a zigzag edge of PAH to a six-member ring by methylation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Ultralow-Strain Zn-Substituted Layered Oxide Cathode with Suppressed P2–O2 Transition for Stable Sodium Ion Storage

Layered transition metal oxides have drawn much attention as a promising candidate cathode material for sodium-ion batteries. However, their performance degradation originating from strains and lattice phase transitions remains a critical challenge. Herein, a high-concentration Zn-substituted Na x MnO 2 cathode with strongly suppressed P2–O2 transition is investigated, which exhibits a volume change as low as 1.0% in the charge/discharge process. Additionally, such ultralow strain characteristics ensure a stable host for sodium ion storage, which significantly improves the cycling stability and rate capability of the cathode material. Also, the strong coupling between the highly reversible capacity and the doping content of Zn in Na x MnO 2 is investigated. It is suggested that a reversible anionic redox reaction can be effectively triggered by Zn ions and is also highly dependent on the Zn content. Such an ion doping strategy could shed light on the design and construction of stable and high-capacity sodium ion host.

25 ENERGY STORAGE↗
DOE OSTI2023

Electrochemical properties of Gd(III) ions in LiCl-KCl-GdCl 3 at 723–1023 K

Electrochemical behavior of Gd(III) ions in molten LiCl-KCl-GdCl 3 was investigated at 723–1023 K via cyclic voltammetry using tungsten as a working electrode, Gd-Bi (mole fraction, x Gd = 0.16) as a reference electrode, and Gd-Bi (x Gd = 0.02) as a counter electrode. A single reduction–oxidation wave was observed, confirming a single-step, 3-electron transfer Gd(III)/Gd transition. The cathodic peak potential exhibited minimal change (<13 mV) over a wide range of scan rates (0.05–0.30 V s –1 ), indicating facile charge transfer kinetics (i.e., a reversible electrode process). A nucleation overpotential associated with solid Gd deposition was observable at low temperatures (T < 823 K). The mass transport properties of Gd(III) ions were estimated using the Berzins and Delahay relation based on diffusion-limiting peak current. The diffusivity values were determined to be D Gd(III) = 0.5–2.7 × 10 –5 cm 2 s –1 at 723–1023 K with an associated activation energy of E a = 33.9 (±1.0) kJ mol –1 . Finally, the two-phase [liquid + GdBi] Gd-Bi alloy reference electrode experienced less than 0.5 mV of drift over 5 days of repeated electrochemical measurements, indicating high stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Understanding Photovoltage Deficits in Electrochemically Grown Tin Sulfide (SnS) Thin-Film Photovoltaic Devices

Tin­(II) sulfide (SnS) is an earth-abundant semiconductor with a direct optical bandgap of ca. 1.1 eV, which makes it a promising absorber material for thin-film photovoltaic (PV) devices. However, existing devices have significant photovoltage deficits, which may be related to the anisotropic structure of the layered Herzenbergite SnS crystal structure. Here, we explore electrochemical deposition as a near room temperature path to oriented SnS crystal films on Mo and FTO substrates and employ vibrating Kelvin probe surface photovoltage (SPV) spectroscopy and J–V measurements to identify conversion losses in them. According to grazing-incidence X-ray diffraction and SEM, the SnS films consist of crystalline microplates with preferred orientation in the [111] and [001] directions. The bare SnS films produce only small and irreversible surface photovoltage signals, due charge trapping and recombination at the SnS surfaces, but addition of a CdS buffer layer lowers the charge recombination rate by 2 orders of magnitude and increases both the photovoltage and its reversibility due to the formation of a p-SnS/n-CdS junction. According to SPV, the FTO/SnS back interface (but not the Mo/SnS interface) forms a detrimental p–n junction that hinders hole transfer. Additional shunting through the relatively open microcrystal SnS layers and a lower conductivity of the FTO substrate explain the low power conversion efficiencies of the final devices (0.18 and 0.10% for the Mo and FTO substrates). Altogether, this work establishes a low-temperature path for the fabrication of crystalline SnS film-based solar cells and identifies the bottlenecks that limit high photoconversion efficiency.

deposition↗
DOE OSTI2023

Enhanced Electrochemical Performance of Disordered Rocksalt Cathodes Enabled by a Graphite Conductive Additive

Cobalt-free cation-disordered rocksalt (DRX) cathodes are a promising class of materials for next-generation Li-ion batteries. Although they have high theoretical specific capacities (>300 mA h/g) and moderate operating voltages (~3.5 V vs Li/Li + ), DRX cathodes typically require a high carbon content (up to 30 wt %) to fully utilize the active material which has a detrimental impact on cell-level energy density. To assess pathways to reduce the electrode’s carbon content, the present study investigates how the carbon’s microstructure and loading (10–20 wt %) influence the performance of DRX cathodes with the nominal composition Li 1.2 Mn 0.5 Ti 0.3 O 1.9 F 0.1 . While electrodes prepared with conventional disordered carbon additives (C65 and ketjenblack) exhibit rapid capacity fade due to an unstable cathode/electrolyte interface, DRX cathodes containing 10 wt % graphite show superior cycling performance (e.g., reversible capacities ~260 mA h/g with 85% capacity retention after 50 cycles) and rate capability (~135 mA h/g at 1000 mA/g). Furthermore, a suite of characterization tools was employed to evaluate the performance differences among these composite electrodes. Overall, these results indicate that the superior performance of the graphite-based cathodes is largely attributed to the: (i) formation of a uniform graphitic coating on DRX particles which protects the surface from parasitic reactions at high states of charge and (ii) homogeneous dispersion of the active material and carbon throughout the composite cathode which provides a robust electronically conductive network that can withstand repeated charge–discharge cycles. Overall, this study provides key scientific insights on how the carbon microstructure and electrode processing influence the performance of DRX cathodes. Based on these results, exploration of alternative routes to apply graphitic coatings is recommended to further optimize the material performance.

25 ENERGY STORAGE↗
DOE OSTI2024

Ketjenblack-Supported and Unsupported ZrO 2 –ZrN Nanoparticle Systems for Enabling Efficient Electrochemical Nitrogen Reduction to Ammonia

Artificial N 2 fixation via the electrocatalytic nitrogen (N 2 ) reduction reaction (NRR) has been recently promoted as a rational route toward reducing energy consumption and CO 2 emission as compared with the traditional Haber–Bosch process. Nevertheless, optimizing NRR relies on developing highly efficient electrocatalysts. Herein, we report on the reliable and reproducible synthesis of two promising electrocatalysts in either the presence or absence of Ketjenblack (KB), namely, ZrO 2 –ZrN@KB and ZrO 2 –ZrN systems, synthesized through the nitriding of Zr. Both materials had never previously been considered for NRR, to the best of our knowledge. Nevertheless, both of these electrocatalysts incorporated a combination of tetragonal ZrO 2 , ZrON, and cubic ZrN and showed excellent activity and durability toward NH 3 formation. Moreover, the maximum NH3 production rate of 84.1 μg h –1 mg –1 at -0.7 V vs a reversible hydrogen electrode (RHE) was achieved with the ZrO 2 –ZrN electrocatalyst with an impressive Faradaic efficiency of 21.2% at -0.6 V vs RHE, indicating a high selectivity associated with the NRR. Additionally, the catalysts demonstrated excellent stability during the electrolysis process and recycling tests. Here we postulate that the combination of exposed active sites of ZrN and ZrO 2 likely contributes to the enhanced NRR performance attributed to ZrO 2 –ZrN.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Electrolyte Regulating toward Stabilization of Cobalt-Free Ultrahigh-Nickel Layered Oxide Cathode in Lithium-Ion Batteries

Cobalt (Co)-free ultrahigh-nickel (Ni) layered oxides exhibit a double-edged competitive advantages in reducing the cathode cost and boosting the energy density, promising the sustainable development of batteries for electric vehicles. However, the increased Ni content, resultantly more highly oxidative Ni 4+ , potentially induces severe capacity fading due to the aggravated side reactions, limiting the practical applications. Here, we evaluate the compatibility of two localized high-concentration electrolytes (LHCEs) with LiNi 0.96 Mg 0.02 Ti 0.02 O 2 (NMT) cathode under a high charging voltage of 4.4 V in lithium ion batteries. The LHCE with EC additive enables the formation of stable interfacial layers on both NMT cathode and graphite anode, thus realizing a capacity retention of 97.2% over 200 cycles at 25 °C and high reversible capacities of ~180.2 and ~185.8 mAh g -1 , respectively, at 5C charge rate and 5C discharge rate. This study offers a promising approach to enable Co-free ultrahigh-Ni layered oxides for practical applications.

25 ENERGY STORAGE↗
DOE OSTI2023

Development of a colloidal gold immunochromatographic assay strip using monoclonal antibody for rapid detection of porcine deltacoronavirus

Porcine deltacoronavirus (PDCoV) cause diarrhea and dehydration in newborn piglets and has the potential for cross-species transmission. Rapid and early diagnosis is important for preventing and controlling infectious disease. In this study, two monoclonal antibodies (mAbs) were generated, which could specifically recognize recombinant PDCoV nucleocapsid (rPDCoV-N) protein. A colloidal gold immunochromatographic assay (GICA) strip using these mAbs was developed to detect PDCoV antigens within 15 min. Results showed that the detection limit of the GICA strip developed in this study was 10 3 TCID 50 /ml for the suspension of virus-infected cell culture and 0.125 μg/ml for rPDCoV-N protein, respectively. Besides, the GICA strip showed high specificity with no cross-reactivity with other porcine pathogenic viruses. Three hundred and twenty-five fecal samples were detected for PDCoV using the GICA strip and reverse transcription-quantitative real-time PCR (RT-qPCR). The coincidence rate of the GICA strip and RT-qPCR was 96.9%. The GICA strip had a diagnostic sensitivity of 88.9% and diagnostic specificity of 98.5%. The specific and efficient detection by the strip provides a convenient, rapid, easy to use and valuable diagnostic tool for PDCoV under laboratory and field conditions.

Wang, Wei↗
DOE OSTI2022

Reversible electron spirals by chirped attopulses at zero time delay

A class of linear, spiral phenomena is discovered in the photoelectron momentum distribution when studying photoionization of S -state atoms by a pair of linearly chirped, oppositely circularly polarized attosecond pulses eventually delayed in time by $\tau$. This controllable effect, dubbed. reversible electron spirals because of its energy-dependent sense of rotation, is identified and can be isolated in the absence of time delay for the case of opposite chirp rates. Further, the astrophysical concept of spiral arm pitch angle is borrowed to gain a better insight into the energy dependence of the reversible spiral rotation, to determine the attochirp as well as the binding energy characteristic of an atomic target. Our results indicate potential applications in attochirpmetry and polarimetry.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Impact of large-scale effects on mass transfer and concentration polarization in Reverse Osmosis membrane systems

Here, we present well-resolved computational fluid dynamics simulations of a large-scale reverse osmosis membrane-spacer configuration (1 m). Our computational model solves the flow and transport equations with variable solute-dependent properties. We utilize a high resolution computational mesh to resolve all relevant length scales associated with spacer-induced mixing and thin concentration boundary layers. An important contribution of this work is the development of a modified mass-transfer correlation that accounts for the development of the concentration boundary layer along the channel. A set of 2D axisymmetric simulations were performed for a spiral wound module layer with varying cross-flow conditions and spacer diameters which indicate a significant entrance length effect for concentration profile development at lower flow rates while mixing effects dominate at higher flow rates. The mass-transfer correlations at higher flow rates compare well with published correlations while a surrogate model for Sherwood number was obtained that depends on an additional similarity variable that accounted for entrance length effects at lower flow rates. Finally, a large-scale membrane-spacer design relevant to high-pressure reverse osmosis is studied with a non-uniform arrangement of spacers, which indicate a substantial saving in pressure drop (~40%) compared to traditional uniformly spaced pattern with minor variations (~2%) in concentration polarization, product water quality (~1%) and water recovery (~7%) compared to a uniform spacer pattern.

97 MATHEMATICS AND COMPUTING↗