Search NASA⌕ Search

SEARCH · Search NASA

Results for “rock fractures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Results of analyses performed on basalt adjacent to penetrators emplaced into volcanic rock at Amboy, California, April 1976

The physical and chemical modifications found in the basalt after impact of four penetrators were studied. Laboratory analyses show that mineralogical and elemental changes are produced in the powdered and crushed basalt immediately surrounding the penetrator. Optical microscopy studies of material next to the skin of the penetrator revealed a layer, 0-2 mm thick, of glass and abraded iron alloy mixed with fractured mineral grains of basalt. Elemental analysis of the 0-2 mm layer revealed increased concentrations of Fe, Cr, Ni, No, and Mn, and reduced concentrations of Mg, Al, Si, and Ca. The Fe, Cr, Ni, and Mo were in fragments abraded from the penetrator. Mineralogical changes occurring in the basalt sediment next to the penetrator include the introduction of micron-size grains of alpha-iron, magnetite, and hematite. The newly formed silicate minerals include metastable phases of silica (tridymite and cristobalite). An increased concentration of Fe, Cr, Ni, and Mo occurred in the 2-mm to 1-cm layer of penetrator no. 1, which impacted at the highest velocity. No elemental concentration increase was noted for penetrators nos. 2 and 3 in the 2-mm to 1-cm layer. Contaminants introduced by the penetrator occur up to 1 cm away from the penetrator's skin. Although volatile elements do migrate and new minerals are formed during the destruction of host minerals in the crushed rock, no changes were observed beyond the 1-cm distance.

Blanchard, M.↗

Thermal evolution of a differentiated Ganymede and implications for surface features

Thermodynamic models are developed for the processes which controlled the evolution of the surface Ganymede, an icy Jovian satellite assumed to have a rock-rich core surrounded by a water-ice mantle. Account is taken of a heat pulse which would have arisen from a Rayleigh-Taylor instability at a deep-seated liquid-solid water interface, rapid fracturing from global stresses imposed by warm ice diapiric upwelling, impacts by large meteorites, and resurfacing by ice flows (rather than core formation). Comparisons are made with existing models for the evolution of Callisto, and the difficulties in defining a mechanism which produced the groove terrain of Ganymede are discussed.

Kirk, R. L.↗

Comparison of the compositions of Venusian surface rocks with those of the terrestrial ocean floor

A statistical comparison of data on the composition of the Venusian surface obtained with Venera and Vega lander X-ray fluorescence spectrometers and data on the composition of the terrestrial ocean floor indicates that the Venera 14 data correspond to certain thoeiitic basalts of the Kane fracture zone in the Middle-Atlantic ridge (22-25 deg N). It is suggested that deep magma storage regions exist on Venus and that the separation of tholeiitic and alkali magmas from a single primitive parent magma is an important process on Venus.

Garvin, J. B.↗

Imaging radar investigations of the Sudbury structure

This paper reports preliminary results of airborne imaging radar studies of the Sudbury structure carried out in preparation for a CCRS European Remote Sensing Satellite (ERS-1) investigation. The data used were synthetic aperture radar (SAR) C-band (5.66 cm) images acquired from about 6 km altitude in 1987. They cover the Sudbury area in both wide and narrow swath modes, with east-west flight paths and north-south illumination directions. Narrow swath resolution is 6 m in range and azimuth; wide swath resolution is 20 m in range and 10 m in azimuth. The STAR imagery has proven highly effective for field use, providing excellent rendition of topography and topographically expressed structure. Reasons for this include the illumination geometry, notably the look azimuth normal to the long axis of the Sudbury structure and Penokean fold axes, the good spatial resolution, and the short wavelength. Forested areas in the Sudbury area tend to be uniformly rough at C-band wavelength, with backscatter dominated by local incidence angle (i.e., topography). Field work using the SAR imagery has to date been concentrated in the North Range and Superior Province as far north as the Benny greenstone belt. This area was chosen for initial investigation of the original size and shape of the Sudbury structure because the effects of the Penokean Orogeny were minimal there. Field work using SAR indicates that there has been little postimpact deformation of the North Range or adjacent Superior Province rock. There appears to be no evidence for an outer ring concentric with the North Range as indicated by early Landsat imagery. The apparent ring shown by Landsat is visible on the SAR imagery as the intersection of two regional fracture patterns not related to the Sudbury structure. There is no outer ring visible southwest of the structure. This can reasonably be explained by Penokean deformation, but there is no outer ring to the northeast cutting the relatively undeformed Huronian sediments of the Cobalt Embayment.

Lowman, P. D.↗

Asteroid collisions: Target size effects and resultant velocity distributions

To study the dynamic fragmentation of rock to simulate asteroid collisions, we use a 2-D, continuum damage numerical hydrocode which models two-body impacts. This hydrocode monitors stress wave propagation and interaction within the target body, and includes a physical model for the formation and growth of cracks in rock. With this algorithm we have successfully reproduced fragment size distributions and mean ejecta speeds from laboratory impact experiments using basalt, and weak and strong mortar as target materials. Using the hydrocode, we have determined that the energy needed to fracture a body has a much stronger dependence on target size than predicted from most scaling theories. In addition, velocity distributions obtained indicate that mean ejecta speeds resulting from large-body collisions do not exceed escape velocities.

Ryan, Eileen V.↗

Original Size and Shape of the Sudbury Structure

This paper presents new evidence bearing on the original size and shape of the Sudbury impact structure. Current opinion is almost unanimous that the structure is a multiring basin with an original diameter of about 200 km and a circular shape that has since been shortened in a northwest-southeast direction by Penokean deformation Evidence for this interpretation, collected chiefly from north of the Sudbury Igneous Complex (SIC), includes supposed outer rings on Landsat imagery, distant occurrences of "Sudbury breccia" (generally defined as pseudotachylite), shatter cone occurrences, and outliers of Huronian sedimentary rock thought to be down-faulted rings. New data from imaging radar and field work north of the SIC, however, contradict this evidence. Radar imagery shows no signs of the supposed outer rings mapped by earlier workers on Landsat images. The most prominent ring has been found to be a chance alignment of two independent fracture sets. Radar imagery from the CCRS Convair 580, with look direction almost normal to the north rim of the SIC, shows no evidence of the rings despite strong look azimuth highlighting. Radar imagery has shown many unmapped diabase dikes north of the SIC. Several exposures of supposed Sudbury breccia are associated with these dikes or with Nipissing diabase intrusions, in some cases actually inside the dikes or directly continuous with them. They appear to be igneous intrusion breccias with no relation to impact. Shock-wave interaction at lithologic contacts cannot be invoked for most of these, because they are part of a northwest trending swarm cutting the SIC in the North Range, and hence too young for an impact origin. Similar diabase-related breccias and pseudotachylite-like veins have been found far outside the Sudbury area between Chapleau and Thessalon. Shatter cones north of the SIC are few and poorly developed, perhaps due to the coarse-grained Footwall rock, and cannot be considered a continuous zone analogous to their occurrence on the South Range in Huronian rocks. Supposed down-faulted outliers of Huronian rocks north of the SIC show no consistent relation to faulting, and the Huronian/Archean contact is locally erosional. Radar imagery and field-checking confirm Rousell's conclusion that the North Range has undergone little or no Penokean deformation. T'his implies that the plan view outline of the crater (floor of the SIC) is original. Extrapolation of the North Range as part of a circular arc leads to an impossibly great diameter. It is concluded that although Penokean deformation largely accounts for the structure's shape, the original crater was not circular and was much smaller than 200 km across.

Lowman, P. D., Jr.↗

Searching for an Acidic Aquifer in the Rio Tinto Basin: First Geobiology Results of MARTE Project

Among the conceivable modern habitats to be explored for searching life on Mars are those potentially developed underground. Subsurface habitats are currently environments that, under certain physicochemical circumstances, have high thermal and hydrochemical stability [1, 2]. In planets like Mars lacking an atmospheric shield, such systems are obviously protected against radiation, which strongly alters the structure of biological macromolecules. Low porosity but fractured aquifers currently emplaced inside ancient volcano/sedimentary and hydrothermal systems act as excellent habitats [3] due to its thermal and geochemical properties. In these aquifers the temperature is controlled by a thermal balance between conduction and advection processes, which are driven by the rock composition, geological structure, water turnover of aquifers and heat generation from geothermal processes or chemical reactions [4]. Moreover, microbial communities based on chemolithotrophy can obtain energy by the oxidation of metallic ores that are currently associated to these environments. Such a community core may sustain a trophic web composed of non-autotrophic forms like heterotrophic bacteria, fungi and protozoa.

Fernandez-Remolar, D. C.↗

Chocolate tablet aspects of cytherean Meshkenet Tessera

Meshkenet Tessera structures were mapped from Magellan data and several resemblances to chocolate tablet boudinage were found. The complex fault sets display polyphase tectonic sequences of a few main deformation phases. Shear and tension have contributed to the areal deformation. Main faults cut the 1600-km long Meshkenet Tessera highland into bar-like blocks which have ridge and groove pattern oriented along or at high angles to the faults. The first approach to the surface block deformation is an assumption of initial parallel shear faulting followed by a chocolate tablet boudinage. Major faults which cut Meshkenet Tessera into rectangular blocks have been active repetitively while two progressive or superposed boudinage set formations have taken place at high angles during the relaxational or flattening type deformation of the area. Chocolate tablet boudinage is caused by a layer-parallel two-dimensional extension resulting in fracturing of the competent layer. Such structures, defined by two sets of boudin neck lines at right angles to each other, have been described by a number of authors. They develop in a flattening type of bulk deformation or during superposed deformation where the rock is elongated in two dimensions parallel to the surface. This is an attempt to describe and understand the formation and development of structures of Meshkenet Tessera which has complicated fault structures.

Raitala, J.↗

Apollo 14 rock samples

Petrographic descriptions of all Apollo 14 samples larger than 1 cm in any dimension are presented. The sample description format consists of: (1) an introductory section which includes information on lunar sample location, orientation, and return containers, (2) a section on physical characteristics, which contains the sample mass, dimensions, and a brief description; (3) surface features, including zap pits, cavities, and fractures as seen in binocular view; (4) petrographic description, consisting of a binocular description and, if possible, a thin section description; and (5) a discussion of literature relevant to sample petrology is included for samples which have previously been examined by the scientific community.

Carlson, I. C.↗

Rotary Percussive Sample Acquisition Tool (SAT): Hardware Development and Testing

In support of a potential Mars Sample Return (MSR) mission an Integrated Mars Sample Acquisition and Handling (IMSAH) architecture has been proposed to provide a means for Rover-based end-to-end sample capture and caching. A key enabling feature of the architecture is the use of a low mass sample Acquisition Tool (SAT) that is capable of drilling and capturing rock cores directly within a sample tube in order to maintain sample integrity and prevent contamination across the sample chain. As such, this paper will describe the development and testing of a low mass rotary percussive SAT that has been shown to provide a means for core generation, fracture, and capture.

Integrated Mars Sample Acquisition and Handling (I↗

Martian surface and crust - Review and synthesis.

The nature of the classical marking of Mars are studied on the basis of Mariner 9 data and some earlier data. The analysis leads to a model of the Martian crust. Evidence for petrologic distinctions between surface materials in dark and light regions is obtained. It is shown that the classical markings are a complex result of three factors: (1) availability of two types of rock material transportable by wind, (2) topographic control of deposition, and (3) prevailing winds producing quasi-permanent preferential deposition patterns. The crust, especially in the Tharsis region, bears strong evidence of mantle-induced uplift of a type existing on earth. Such uplifts have obliterated ancient craters, caused fractures and graben systems, and have resulted in intense volcanism.

Hartmann, W. K.↗

Deformational sequence of a portion of the Michipicoten greenstone belt, Chabanel Township, Ontario

Detailed mapping at a scale of one inch = 400 feet is being carried out within a fume kill, having excellent exposure, located in the southwestern portion of the Michipicoten Greenstone Belt near Wawa, Ontario. The rocks are metasediments and metavolcanics of lower greenschist facies. U-Pb geochronology indicates that they are at least 2698 + or - 11 Ma old. The lithologic packages strike northeast to northwest, but the dominant strike is approximately east-west. Sedimentary structures and graded bedding are well preserved, aiding in the structural interpretation of this multiply deformed area. At least six phases of deformation within a relatively small area of the Michipicoten Greenstone Belt have been tentatively identified. These include the following structural features in approximate order of occurrence: (0) soft-sediment structures; (1) regionally overturned rocks, flattened pebbles, bedding parallel cleavage, and early, approximately bedding parallel faults; (2) northwest to north striking cleavage; (3) northeast striking cleavage and associated folds, and at least some late movement on approximately bedding parallel faults; (4) north-northwest and northeast trending faults; and (5) diabase dikes and associated fracture cleavages. Minor displacement of the diabase dikes occurs on faults that appear to be reactivated older structures.

Shrady, C. H.↗

A Mars 2020 Perseverance SuperCam Perspective on the Igneous Nature of the Máaz Formation at Jezero Crater, Mars

The Mars2020 Perseverance rover landed in Jezero crater in February 2020,and first encountered the Máaz formation (or Crater floor-fractured rough(Cf-fr) unit previously mapped based on orbital data[1]).In this study, we use data from the SuperCam instrument(SCAM) to show that the Máaz formation has an igneous origin. SuperCam is a remote-sensing instrument onboard Perseverance, and investigates the texture, mineralogy, and chemistry of rocks and soils, as well as atmospheric features [2,3]. SuperCam comprises the Remote Micro Imager (RMI) to provide high-resolution images, laser-induced breakdown spectroscopy (LIBS)to investigate the major and minor element chemistry of materials, Raman, and passive visible-near infrared (VISIR) spectroscopy to analyze the mineralogy of targets, and time-resolved luminescence spectroscopy (TRLS)to measure organic fluorescence and inorganic luminescence. In addition, the microphone (MIC) can constrain the rock hardness through measurements of the shockwave of LIBS shots. In this study, we use LIBS-based major-oxide compositions (MOC),quantified using the calibration in [2].

Mars 2020↗

The nakhlite meteorites: Augite-rich igneous rocks from Mars

The seven nakhlite meteorites are augite-rich igneous rocks that formed in flows or shallow intrusions of basaltic magma on Mars. They consist of euhedral to subhedral crystals of augite and olivine (to 1 cm long) in fine-grained mesostases. The augite crystals have homogeneous cores of Mg' = 63% and rims that are normally zoned to iron enrichment. The core-rim zoning is cut by iron-enriched zones along fractures and is replaced locally by ferroan low-Ca pyroxene. The core compositions of the olivines vary inversely with the steepness of their rim zoning - sharp rim zoning goes with the most magnesian cores (Mg' = 42%), homogeneous olivines are the most ferroan. The olivine and augite crystals contain multiphase inclusions representing trapped magma. Among the olivine and augite crystals is mesostasis, composed principally of plagioclase and/or glass, with euhedra of titanomagnetite and many minor minerals. Olivine and mesostasis glass are partially replaced by veinlets and patches of iddingsite, a mixture of smectite clays, iron oxy-hydroxides and carbonate minerals. In the mesostasis are rare patches of a salt alteration assemblage: halite, siderite, and anhydrite/ gypsum. The nakhlites are little shocked, but have been affected chemically and biologically by their residence on Earth. Differences among the chemical compositions of the nakhlites can be ascribed mostly to different proportions of augite, olivine, and mesostasis. Compared to common basalts, they are rich in Ca, strongly depleted in Al, and enriched in magmaphile (incompatible) elements, including the LREE. Nakhlites contain little pre-terrestrial organic matter. Oxygen isotope ratios are not terrestrial, and are different in anhydrous silicates and in iddingsite. The alteration assemblages all have heavy oxygen and heavy carbon, while D/H values are extreme and scattered. Igneous sulfur had a solar-system isotopic ratio, but in most minerals was altered to higher and lower values. High precision analyses show mass-independent fractionations of S isotopes. Nitrogen and noble gases are complex and represent three components: two mantle sources (Chas-E and Chas-S), and fractionated Martian atmosphere. The nakhlites are igneous cumulate rocks, formed from basaltic magma at approx.1.3 Ga, containing excess crystals over what would form from pure magma. After accumulation of their augite and olivine crystals, they were affected (to various degrees) by crystallization of the magma, element diffusion among minerals and magma, chemical reactions among minerals and magma, magma movement among the crystals, and post-igneous chemical equilibration. The extent of these modifications varies, from least to greatest, in the order: MIL03346, NWA817, Y000593, Nakhla = Governador Valadares, Lafayette, and NWA998. Chemical, isotopic, and chronologic data confirm that the nakhlites formed on Mars, most likely in thick lava flows or shallow intrusions. Their crystallization ages, referenced to crater count chronologies for Mars, suggest that the nakhlites formed on the large volcanic constructs of Tharsis, Elysium, or Syrtis Major. The nakhlites were suffused with liquid water, probably at approx.620 ma. This water dissolved olivine and mesostasis glass, and deposited iddingsite and salt minerals in their places. The nakhlites were ejected from Mars at approx.10.75Ma by an asteroid impact and fell to Earth within the last 10,000 years. Although the nakhlites are enriched in incompatible elements, their source mantle was strongly depleted. This depletion event was ancient, as the nakhlites source mantle was fractionated while short-lived radionuclides (e.g., t(sub 1/2 = 9 my) were still active. This differentiation event may have been core formation coupled with a magma ocean, as is inferred for the moon.

Treiman, Allan H.↗

Petrology and Geochemistry of New Ureilites and Ureilite Genesis

Ureilites are C-bearing, basalt-depleted olivine+pyroxene achondrites from a differentiated asteroid. The group is heterogeneous, exhibiting ranges in O isotopic composition, Fe/Mg, Fe/Mn, pyx/ol, siderophile and lithophile trace element content, and C content and isotopic composition [1]. Some of these characteristics are nebular in origin; others were strongly overprinted by asteroidal igneous processes. The consensus view is that most ureilites are melt-residues, but some are partial cumulates or have interacted with a melt [1,2]. An "unroofing" event occurred while the parent asteroid was hot that froze in mineral core com-positions and resulted in FeO reduction at olivine grain margins. We have studied several new ureilites, but will focus here on two anomalous stones; LAR 04315 and NWA 1241. LAR 04315 is texturally unusual. It contains olivine with angular subdomains, and low-Ca pyroxene riddled with wormy inclusions of metal+troilite, graphite, and possibly other phases, and irregular inclusions of high-Ca pyroxene. Reduction occurred along olivine grain margins and internal fractures, but not along subdomain boundaries. Although texturally odd, LAR 04351 is a typical ureilite in mineral and bulk composition. The olivine is Fo80.8 and falls on the ureilite Fe/Mn-Fe/Mg trend. Its olivine composition falls within the range of the majority of ureilites, and it is typical of these ureilites in bulk rock lithophile and siderophile element contents.

Mittlefehldt, David W.↗

Structural geology investigation on Massif Central and Parisian Basin (France)

The author has identified the following significant results. Band 5 gives the most information concerning the fracturing in the Massif Central and Parisian Basins. Band 6 and 7 show the fractures emphasized by forest boundaries and by the linear trace of water courses. The most remarkable information drawn from the preliminary investigation of two ERTS-1 images covering two different landscapes, a regular relief of shelving plateau bounded by cuestas having a sedimentary origin and a mountainous region built in crystalline and volcanic rocks, is that the deep structural elements under a thick sedimentary cover can be translated on the surface by indirect criteria. MSS imagery has permitted the Metz fault to be extended towards the west and shows clearly, through land use on the Rhone Valley fluvial deposit, the continuation towards the east of the carboniferous basin of St. Etienne.

Weecksteen, G.↗

The relationship of extensional and compressional tectonics to a Precambrian fracture system in the eastern overthrust belt, USA

The central and southern Appalachians have a long history of interrelated extensional and compressional tectonics. It is proposed that each episode was controlled by a reactivation of a fracture system in the Precambrian basement. Proprietary seismic-reflection profiles show a system of down-to-the-east Precambrian extensional faults. When under renewed extension, these faults produce features such as the western border faults of Mesozoic basins, and when under compression, probably produce tectonic ramps in the overlying sedimentary cover rocks as well as the spatially and genetically related Alleghenian folds. This system, which parallels the Appalachian trend, is cut by a system of cross-strike hinge or scissors faults that have probable strike-slip movements. Reactivation of this cross-strike system appears to have produced lateral ramps that connect decollements at different stratigraphic levels and caused abrupt changes in fold wavelength along strikes. Continued reactivation of this cross-strike system is suggested by east-west border faults and Precambrian highs between Mesozoic basins. The present activity of this system is suggested by the fact that more than 35% of recent earthquakes are coincident with cross-strike faults and lateral ramps.

Pohn, H.↗

Large impacts in the Baltic shield with special attention to the Uppland structure

Within the Baltic Shield several very large structures have been identified and are suspected to be of meteorite impact origin. Some of these deeply eroded circular features are presented with special attention to the Uppland structure, where several indications point toward an impact origin in the mid-Proterozoic. The structures exceed 100 km in diameter and the topographic expression is inferior or absent. An arcuate arrangement of lithologies occurs around the margin of the structures and the central regions show conform magnetic and positive gravity anomalies. The Uppland structure is approximately 320 km in diameter as expressed by morphological, geological, and geophysical concentric patterns. The central part is topographically remarkably flat and is characterized by an unusual irregular fracture pattern. A subcircular central tonalite with density of 2.81 Mg(sup -3) gives a positive gravity anomaly of 35 mgal and the gravimetric profile is very similar to that of Manicouagan and Vredefort. The tonalite constitutes a huge antiform, 80 km in diameter, probably representing a 12-km structural uplift of infracrustal rocks. The flancs of the tonalite are characterized by recrystallized pseudotachylitic breccia dykes and breccia zones. Around the central parts amphibolite-grade metamorphic rocks appear as large fragments within a fine-grained granite interpreted as a thermally annealed melt rock. Several occurrences of breccia dykes and breccia-bearing melts have been identified about 100 km from the gravimetric center of the structure. Impact-related ore deposits are located around the margin of the structure and are interpreted as preexisting downfaulted iron formations, and deposits formed from remobilization of these preimpact occurrences. The so-called ball ores are interpreted to have formed by fluid injection similar to the formation of breccia dykes. The extensive hydrothermal alteration along the outer margin of the structure have created extreme soda and K-enriched rocks ('leptites') from preexisting gneiss granites and supracrustal sedimentary gneisses.

Henkel, H.↗