Search NASA⌕ Search

SEARCH · Search NASA

Results for “rotating flows”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Semidirect computations for transonic flow

A semidirect method, driven by a Poisson solver, was developed for inviscid transonic flow computations. It is an extension of a recently introduced algorithm for solving subsonic rotational flows. Shocks are captured by implementing a form of artificial compressibility. Nonisentropic cases are computed using a shock tracking procedure coupled with the Rankine-Hugoniot relationships. Results are presented for both subsonic and transonic flows. For the test geometry, an unstaggered cascade of 20 percent thick circular arc airfoils at zero angle of attack, shocks are crisply resolved in supercritical situations and the algorithm converges rapidly. In addition, the convergence rate appears to be nearly independent of the entropy and vorticity production at the shock.

Swisshelm, J. M.↗
NASA NTRS1992

A coupled Eulerian/Lagrangian method for the solution of three-dimensional vortical flows

A coupled Eulerian/Lagrangian method is presented for the reduction of numerical diffusion observed in solutions of three-dimensional rotational flows using standard Eulerian finite-volume time-marching procedures. A Lagrangian particle tracking method using particle markers is added to the Eulerian time-marching procedure and provides a correction of the Eulerian solution. In turn, the Eulerian solutions is used to integrate the Lagrangian state-vector along the particles trajectories. The Lagrangian correction technique does not require any a-priori information on the structure or position of the vortical regions. While the Eulerian solution ensures the conservation of mass and sets the pressure field, the particle markers, used as 'accuracy boosters,' take advantage of the accurate convection description of the Lagrangian solution and enhance the vorticity and entropy capturing capabilities of standard Eulerian finite-volume methods. The combined solution procedures is tested in several applications. The convection of a Lamb vortex in a straight channel is used as an unsteady compressible flow preservation test case. The other test cases concern steady incompressible flow calculations and include the preservation of turbulent inlet velocity profile, the swirling flow in a pipe, and the constant stagnation pressure flow and secondary flow calculations in bends. The last application deals with the external flow past a wing with emphasis on the trailing vortex solution. The improvement due to the addition of the Lagrangian correction technique is measured by comparison with analytical solutions when available or with Eulerian solutions on finer grids. The use of the combined Eulerian/Lagrangian scheme results in substantially lower grid resolution requirements than the standard Eulerian scheme for a given solution accuracy.

Felici, Helene Marie↗
NASA NTRS1974

The solution of three-variable duct-flow equations

This paper establishes a numerical method for the solution of three-variable problems and is applied here to rotational flows through ducts of various cross sections. An iterative scheme is developed, the main feature of which is the addition of a duplicate variable to the forward component of velocity. Two forward components of velocity result from integrating two sets of first order ordinary differential equations for the streamline curvatures, in intersecting directions across the duct. Two pseudo-continuity equations are introduced with source/sink terms, whose strengths are dependent on the difference between the forward components of velocity. When convergence is obtained, the two forward components of velocity are identical, the source/sink terms are zero, and the original equations are satisfied. A computer program solves the exact equations and boundary conditions numerically. The method is economical and compares successfully with experiments on bent ducts of circular and rectangular cross section where secondary flows are caused by gradients of total pressure upstream.

Stuart, A. R.↗
NASA NTRS1975

Asymptotic theory of two-dimensional trailing-edge flows

Problems of laminar and turbulent viscous interaction near trailing edges of streamlined bodies are considered. Asymptotic expansions of the Navier-Stokes equations in the limit of large Reynolds numbers are used to describe the local solution near the trailing edge of cusped or nearly cusped airfoils at small angles of attack in compressible flow. A complicated inverse iterative procedure, involving finite-difference solutions of the triple-deck equations coupled with asymptotic solutions of the boundary values, is used to accurately solve the viscous interaction problem. Results are given for the correction to the boundary-layer solution for drag of a finite flat plate at zero angle of attack and for the viscous correction to the lift of an airfoil at incidence. A rational asymptotic theory is developed for treating turbulent interactions near trailing edges and is shown to lead to a multilayer structure of turbulent boundary layers. The flow over most of the boundary layer is described by a Lighthill model of inviscid rotational flow. The main features of the model are discussed and a sample solution for the skin friction is obtained and compared with the data of Schubauer and Klebanoff for a turbulent flow in a moderately large adverse pressure gradient.

Melnik, R. E.↗
NASA NTRS1951

Applicability of the Hypersonic Similarity Rule to Pressure Distributions which Include the Effects of Rotation for Bodies of Revolution at Zero Angle of Attack

The analysis of Technical Note 2250, 1950, is extended to include the effects of flow rotation. It is found that the theoretical pressure distributions over drive cylinders can be related by the hypersonic similarity rule with sufficient accuracy for most engineering purposes. The error introduced into pressure distributions and drag effective cylinders by ignoring the rotation term in the characteristic equations is investigated.

Rossow, Vernon J↗
NASA NTRS1953

The similarity law for hypersonic flow and requirements for dynamic similarity of related bodies in free flight

The similarity law for nonsteady, inviscid, hypersonic flow about slender three-dimensional shapes is derived. Conclusions drawn are shown to be valid for rotational flow. Requirements for dynamic similarity of related shapes in free flight are obtained. The law is examined for steady flow about related three-dimensional shapes. Results of an experimental investigation of the pressures acting on two inclined cones are found to check the law as it applies to bodies of revolution.

Hamaker, Frank M↗
NASA NTRS1987

Laminar mixing in a small floating zone

The relationship between the flow and solute fields during steady mass transfer of a dilute component is analyzed for multi-cellular rotating flows in the floating zone process of semiconductor growth. When the recirculating flows are weak in relation to the rate of crystal growth, a closed-form solution clearly shows the link between the convection pattern in the melt and the solute distribution across the surface of the growing solid. In the limit of strong convection, finite element calculations demonstrate the tendency of the composition to become uniform over the majority of the melt. The solute segregation in the product crystal is greatest when the recirculating motion is comparable to the rate of crystal growth, and points to the danger in attempting to grow compositionally uniform materials from a nearly convectionless melt.

Harriott, George M.↗
NASA NTRS1991

A study of high speed flows in an aircraft transition duct

The study of circular-to-rectangular transition duct flows with and without inlet swirl is presented. A method was devised to create a swirling, solid body rotational flow with minimal associated disturbances. Details of the swirl generator design and construction are discussed. Coefficients based on velocities and total and static pressures measured in cross stream planes at four axial locations within the transition duct along with surface static pressures and surface oil film visualization are presented for both nonswirling and swirling incoming flows. A method was developed to acquire trace gas measurements within the transition duct at high flow velocities. Statistical methods are used to help interpret the trace gas results.

Reichert, Bruce A.↗
NASA NTRS1952

The linearized characteristics method and its application to practical nonlinear supersonic problems

The methods of characteristics has been linearized by assuming that the flow field can be represented as a basic flow field determined by nonlinearized methods and a linearized superposed flow field that accounts for small changes of boundary conditions. The method has been applied to two-dimensional rotational flow where the basic flow is potential flow and to axially symmetric problems where conical flows have been used as the basic flows. In both cases the method allows the determination of the flow field to be simplified and the numerical work to be reduced to a few calculations. The calculations of axially symmetric flow can be simplified if tabulated values of some coefficients of the conical flow are obtained. The method has also been applied to slender bodies without symmetry and to some three-dimensional wing problems where two-dimensional flow can be used as the basic flow. Both problems were unsolved before in the approximation of nonlinear flow.

Ferri, Antonio↗
NASA NTRS1976

Simulation of three-dimensional separated flows with vortex filaments

A Lagrangian vorticity method for numerical simulation of three-dimensional separated flows with vortex filaments, about solid bodies, is discussed. The method is an extension of an earlier one for three-dimensional rotational flows away from solid boundaries e.g., jets, vortex rings, and aircraft trailing vortices after initial rollup. In this method an harmonic contribution to the velocity field is computed at each time step to ensure tangency of the velocity field at the boundary. The mechanics of the boundary layer are approximated with sufficient accuracy so that the separation lines are located correctly on the surface of the body.

Leonard, A.↗
NASA NTRS2010

Near Stall Flow Analysis in the Transonic Fan of the RTA Propulsion System

Turbine-based propulsion systems for access to space have been investigated at NASA Glenn Research center. A ground demonstrator engine for validation testing has been developed as a part of the program. The demonstrator, the Revolutionary Turbine Accelerator (RTA-1), is a variable cycle turbofan ramjet designed to transition from an augmented turbofan to a ramjet that produces the thrust required to accelerate the vehicle to Mach 4. The RTA-1 is designed to accommodate a large variation in bypass ratio from sea level static to Mach 4 flight condition. A key component of this engine is a new fan stage that accommodates these large variations in bypass ratio and flow ranges. In the present study, unsteady flow behavior in the fan of the RTA-1 is studied in detail with large eddy simulation (LES) and the numerical results are compared with measured data. During the experimental study of the fan stage, humming sound was detected at 100 % speed near stall operation. The main purpose of the study is to investigate details of the unsteady flow behavior at near stall operation and to identify a possible cause of the hum. The large eddy simulation of the current flow field reproduces main features of the measured flow very well. The LES simulation indicates that non-synchronous flow instability develops as the fan operates toward the stall limit. The FFT analysis of the calculated wall pressure shows that the rotating flow instability has the characteristic frequency that is about 50% of the blade passing frequency.

Hah, Chunill↗
NASA NTRSDate not supplied

USM3D-ME Solutions for RANS Test Suite of High-Fidelity CFD Verification Workshop 2024

USM3D-ME solutions for the High-Fidelity CFD Verification Workshop 2024 are presented. Solutions are computed for the Reynolds-Averaged Navier-Stokes equations using the Spalart-Allmaras one equation turbulence model, SA-neg-QCR2000-R, that is enhanced with a nonlinear correction to the turbulence stresses and a correction for flow rotation. USM3D-ME solutions have been computed for the three verification cases, namely, a Joukowski airfoil, a subsonic three-dimensional flow around an extruded NACA 0012 wing in tunnel, and subsonic flow around a high-lift wing-body configuration. Iterative convergence of USM3D-ME solutions on several grids within various grid families is demonstrated. Grid convergence of integrated forces, pitching moment and sectional variations of surface pressure and skin friction are also presented.

CFD↗
NASA NTRS1983

Flow Through a Rotating Turbomachinery Blade Row

Computer program, QSONIC, developed for calculating full potential transonic quasi-three dimensional flow through rotating turbomachinery blade row. QSONIC written in FORTRAN IV.

Farrell, C. A., Jr.↗
NASA NTRS1983

An analytic solution for the response of the neutral atmosphere to the high-latitude convection pattern

The analytic solutions to a two-dimensional, shallow-water model of the high-latitude thermosphere are developed. The equations are a linearized representation of the response of the neutral atmosphere to the momentum source due to the plasma convection pattern. The obtained results show how the neutral winds depend on the Pedersen and Hall ion drag coefficients and the horizontal wave number. The response depends on the dimensionless scale as it appears in the product of the Rossby radius of deformation and the wave number. The flow pattern is shifted in local time from the plasma flow pattern by an amount that depends on the average electron density. At the largest scales there is a 180 deg phase shift between the rotational flow components in the E and F regions. The model applies to quiet magnetic conditions and below 200 km of altitude.

Mikkelsen, I. S.↗
NASA NTRS1984

The effects of interplanetary magnetic field orientation on dayside high-latitude ionospheric convection

The Atmosphere Explorer C data base of Northern Hemisphere ionospheric convection signatures at high latitudes is examined during times when the interplanetary magnetic field orientation is relatively stable. It is found that when the interplanetary magnetic field (IMF) has its expected garden hose orientation, the center of a region where the ion flow rotates from sunward to antisunward is displaced from local noon toward dawn irrespective of the sign of By. Poleward of this rotation region, called the cleft, the ion convection is directed toward dawn or dusk depending on whether By is positive or negative, respectively. The observed flow geometry can be explained in terms of a magnetosphere solar wind interaction in which merging is favored in either the prenoon Northern Hemisphere or the prenoon Southern Hemisphere when the IMF has a normal sector structure that is toward or away, respectively.

Heelis, R. A.↗
NASA NTRS1980

Self-excited rotor whirl due to tip-seal leakage forces

The limitations in the performance of turbomachines which arise as a result of selfexcited vibration were investigated. Bearing forces, elastic hysteresis, and forces from fluid flow through clearances were considered as possible origins. A theoretical evaluation was made to determine the dependence of the forces form the leakage losses and from rotating flow in radial gaps.

Leie, B.↗
NASA NTRS1985

Steady inviscid three-dimensional flows

The present analysis combines some of the theoretical concepts suggested by Hawthorne (1955) with a numerical integration procedure suggested by Martin (1978). The resulting algorithm is for inviscid subsonic flows. Thus, it is restricted to high Reynolds number flows. Chang and Adamczyk (1983) have provided a detailed derivation of the present algorithm along with a discussion of its stability bounds. The present paper represents a summary of this work. The integration of the continuity equation is considered along with an evaluation of the entropy, total temperature, and vorticity field. Attention is given to the shear-flow algorithm construction, and an application to a shear flow in a turning channel. A description of numerical results is also provided. The discussed algorithm represents a new procedure for solving inviscid subsonic three-dimensional rotational flows.

Adamczyk, J. J.↗