Search NASA⌕ Search

SEARCH · Search NASA

Results for “saturation temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Advanced rocket engine cryogenic turbopump bearing thermal model

A lumped node thermal model was developed representing the Space Shuttle Main Engine (SSME) liquid oxygen (LOX) turbopump turbine end bearings operating in a cryogenically cooled bearing tester. Bearing elements, shaft, carrier, housing, cryogen flow characteristics, friction heat, and fluid viscous energy are included in the model. Heat transfer characteristics for the regimes of forced convection boiling are modeled for liquid oxygen (LOX) and liquid nitrogen (LN2). Large temperature differences between the cryogenic fluid and baring contact surfaces require detailed nodal representation in these areas. Internal loads and friction heat are affected by temperature dependent operating clearances requiring iterations between bearing thermal and mechanical models. Analyses indicate a thermal-mechanical coupling resulting in reduced operating clearances, increased loading and heating which can contribute to premature bearing failure. Contact surfaces operate at temperatures above local saturation resulting in vapor rather than liquid in the contacts, precluding possible liquid film lubrication. Elevated temperatures can reduce lubrication, increase friction, and reduce surface hardness supporting a surface failure mode rather than subsurface fatigue.

Cody, J. C.↗
NASA NTRS1994

Cyclogenesis in a saturated environment

The dynamics of baroclinic wave growth in a saturated environment is examined using linear and nonlinear models employing a parameterization of latent heat release that assumes all rising air is saturated, and saturation equivalent potential temperature is conserved on ascent. Piecewise potential vorticity (PV) diagnostics are used to interpret the results. When the stability to vertical displacements in saturated air is allowed to increase with height, as it must in an atmosphere with a constant, positive lapse rate of potential temperature, the growth rates of the most unstable modes of the Eady problem grow only marginally faster than the modes of the dry problem. The vertical variation of moist static stability produces a gradient of moist potential vorticity in the rising air, eliminating the short-wave cutoff present in the dry Eady problem. The destabilization of the short waves is shown to be associated with the interaction between surface potential temperature anomalies and diabatically generated lower-tropospheric potential vorticity anomalies. Nonlinear primitive equation simulations, starting from normal-mode initial conditions, show that while the dry wave grows at nearly the linear growth rate until maximum amplitude is reached, the moist wave grows significantly faster than the linear growth rate at finite amplitude. This enhanced growth is associated with the rapid amplification of a mesoscale PV anomaly generated by latent heat release at the warm front. The rapid amplification of the surface cyclone results from the superposition of the circulation associated with this misoscale PV anomaly upon the circulation associated with the surface and upper boundary potential temperature anomalies. Additional integrations with finite-amplitude initial conditions more typical of atmospheric conditions exhibit similar behavior. It is suggested that many of the rapid cyclogenesis events that occur as upper-troposheric PV anomalies cross the east coasts of continents may arise from the rapid generation of PV anomalies by condensational heating in the moist maritime lower troposphere.

Whitaker, Jeffrey S.↗
DOE OSTI2026

Structural, magnetic and electrical transport properties of YMnAl

The intermetallic compound YMnAl, crystallizing in the cubic C-15 (MgCu 2 -type) structure, was prepared using arc-melting and annealing. Rietveld refinement of the XRD pattern yields a lattice parameter of a = 7.816(1) Å⁠. The system exhibits antiferromagnetic order with a transition temperature of approximately 38 K, along with indications of a spin-glass–like phase. The effective magnetic moment, estimated from Curie–Weiss fitting of the susceptibility versus temperature curve, is 6.06 μ B /f.u. and the Curie–Weiss temperature of −79 K confirming the antiferromagnetic nature. Isothermal magnetization measurements below and above the Néel temperature show no saturation, with a maximum magnetization of 0.09 μ B /f.u observed at an applied field of 9 T. The temperature dependence of resistivity exhibits a negative temperature coefficient, characteristic of dirty metals. Hall effect measurements indicate the absence of an anomalous Hall contribution. The Hall coefficient RH, carrier concentration n, and mobility μ estimated from R XY (H) are -1.05×10 -8 m 3 /C, 5.92×10 26 m -3 and 1.05×10 -3 m 2 /V.s, respectively. Our first-principles calculations indicate that YMnAl in the orthorhombic (Imma) structure has the lowest energy; however, the substitutional disorder occurring during experimental synthesis may favor the formation of the cubic Laves phase.

Crystallography↗
NASA NTRS2013

The Scaling of Broadband Shock-Associated Noise with Increasing Temperature

A physical explanation for the saturation of broadband shock-associated noise (BBSAN) intensity with increasing jet stagnation temperature has eluded investigators. An explanation is proposed for this phenomenon with the use of an acoustic analogy. To isolate the relevant physics, the scaling of BBSAN peak intensity level at the sideline observer location is examined. The equivalent source within the framework of an acoustic analogy for BBSAN is based on local field quantities at shock wave shear layer interactions. The equivalent source combined with accurate calculations of the propagation of sound through the jet shear layer, using an adjoint vector Green's function solver of the linearized Euler equations, allows for predictions that retain the scaling with respect to stagnation pressure and allows for saturation of BBSAN with increasing stagnation temperature. The sources and vector Green's function have arguments involving the steady Reynolds- Averaged Navier-Stokes solution of the jet. It is proposed that saturation of BBSAN with increasing jet temperature occurs due to a balance between the amplication of the sound propagation through the shear layer and the source term scaling.

Miller, Steven A. E.↗
DOE OSTI2022

The solubility of titanite in silicate melt determined from growth and dissolution experiments

The solubility of titanite (CaTiSiO 5 ) in Si-rich melts was measured experimentally through growth experiments at 800–1000 °C, 0.5–1.0 GPa, log fO 2 ~ CCO–0.8, t = 72–168 h, and H 2 O = 0 to 4 wt.%, and in dissolution experiments at 925–1300 °C, 0.8 GPa, t = 18–118 h, and H 2 O = 1–10 wt.% in a piston-cylinder apparatus. Run product glasses in growth experiments were homogeneous, and iron loss suppressed ilmenite crystallization. Saturation concentrations in dissolution experiments were estimated by fitting measured diffusion profiles. Titanite solubility increases with increasing temperature and melt composition parameter \(M = {\text{ molar }}\left( {{\text{Na }} + {\text{ K }} + {\text{ 2Ca}}} \right)/\left( {{\text{Al }} \times {\text{ Si}}} \right)\) . Multiple linear regression of glass composition data from growth and dissolution experiments ( n = 29) plus 39 experiments from the LEPR database (Hirschmann et al. 2008 ) yielded the titanite solubility equation (adj. r 2 = 0.95): \(\left( {TiO_{2} } \right)^{melt} \left( {wt.\% } \right) = 0.978 \times M + 0.0048 \times T\left( K \right){-}5.90\) . This model correctly predicted undersaturation in 95% of 2344 experiments from the LEPR database that did not have titanite or rutile. Application to natural rocks yields saturation temperatures that are similar to independent temperature estimates. Finally, this equation should be useful for constraining the temperatures of titanite-saturated melts, for determining whether titanite saturation in magmatic source regions is likely, and for determining when titanite can crystallize and begin to exert an influence on melt geochemistry.

58 GEOSCIENCES↗
NASA NTRS1982

Sulfide saturation of basalt and andesite melts at high pressures and temperatures

When the sulfur content of an Fe-bearing magma exceeds the saturation limit for the bulk composition, an immiscible iron sulfide melt fraction separates. For an understanding of the geochemistry of sulfur-bearing magmatic systems, more information is needed regarding the solubility of metal sulfide in silicate melt at its source and the solubility changes as a function of changing intensive and extensive variables. In the present investigation, the sulfur saturation surface is determined for the pressure range from 12.5 to 30 kbar and the temperature range from 1300 to 1460 C for three silicate melt compositions representing a range of SiO2 and FeO compositions.

Wendlandt, R. F.↗
NASA NTRS1977

Equations for the determination of humidity from dewpoint and psychrometric data

A general expression based on the Claperon-Clausius differential equation that relates saturation vapor pressure, absolute temperature, and the latent heat of transformation was derived that expresses saturation vapor pressure as a function of absolute temperature. This expression was then used to derive general expressions for vapor pressure, absolute humidity, and relative humidity as functions of either dewpoint and ambient temperature or psychrometric parameters. Constants for all general expressions were then evaluated to give specific expressions in both the international system of units and U.S. customary units for temperatures above and below freezing.

Parish, O. O.↗
NASA NTRS1990

Liquid Transfer Cryogenic Test Facility: Initial hydrogen and nitrogen no-vent fill data

The Liquid Transfer Cryogenic Test Facility is a versatile testbed for ground-based cryogenic fluid storage, handling, and transfer experimentation. The test rig contains two well instrumented tanks, and a third interchangeable tank, designed to accommodate liquid nitrogen or liquid hydrogen testing. The internal tank volumes are approx. 18, 5, and 1.2 cu. ft. Tank pressures can be varied from 2 to 30 psia. Preliminary no vent fill tests with nitrogen and hydrogen were successfully completed with the test rig. Initial results indicate that no vent fills of nitrogen above 90 percent full are achievable using this test configuration, in a 1-g environment, and with inlet liquid temperatures as high as 143 R, and an average tank wall temperature of nearly 300 R. This inlet temperature corresponds to a saturation pressure of 19 psia for nitrogen. Hydrogen proved considerably more difficult to transfer between tanks without venting. The highest temperature conditions resulting in a fill level greater than 90 percent were with an inlet liquid temperature of 34 R, and an estimated tank wall temperature of slightly more than 100 R. Saturation pressure for hydrogen at this inlet temperature is 10 psia. All preliminary no vent fill tests were performed with a top mounted full cone nozzle for liquid injection. The nozzle produces a 120 degree conical droplet spray at a differential pressure of 10 psi. Pressure in the receiving tank was held to less than 30 psia for all tests.

Moran, Matthew E.↗
NASA NTRS1991

Physics of heavy ions (1989-1990)

The results from studies on polar wind ion heating due to kinetic ion beam instabilities and the effects of such ion heating on the outflow of O(+) in the polar wind are presented and discussed. First, the linear instabilities associated with an O(+) and H(+) polar wind plasma in the presence of O(+) and H(+) beams for a range of O(+)/H(+) beam densities, T(sub e)/T(sub i), and ion beam speeds were examined. Then, nonlinear heating of the polar wind ions was studied, using numerical simulations. The O(+) and H(+) polar wind ions were modeled by isotropic Maxwellian distributions, and the electrons, O(+) beams, and H(+) beams were modeled by drifting Maxwellian distributions. The effects of the kinetic ion heating on the outflow of the polar wind ions were examined from the ionosphere, using a time-dependent hydrodynamic model. A numerical code to solve the O(+) and H(+) continuity and momentum equations in a flux tube from ionospheric to magnetospheric altitudes were developed. The effects of ion heating were included by allowing for the altitudinal variation of the ion temperatures in the momentum equation. The ion temperature profiles were specified based on the ion heating characteristics found from previous kinetic simulations. It was assumed that heating occurred above 1500 km and increased to a saturated value of temperature that was obtained directly from the kinetic simulation study. The characteristics of the dynamical polar wind without ion heating were studied, and a flux tube on closed field lines that suddenly became open at t = 0 was simulated. Then, the effects of ion heating were included. To gain some physical insight, two limiting cases were considered: preferential H(+) heating and preferential O(+) heating. How O(+) heating can lead to enhanced polar wind O(+) fluxes in the polar magnetosphere is shown.

Ashour-Abdalla, M.↗
NASA NTRS1977

The atmosphere of Jupiter from earth-based and spacecraft observations in the thermal infrared

The temperature and cloud structure, relative abundances of H2 and He, and the global climatology of Jupiter's atmosphere have been deduced from Pioneer 10 and 11 infrared radiometer data, along with earth-based observations of the spectrum at 8-14 and 12-24 microns. The H2 and He abundances are near those expected from 'solar' composition. The effective planetary temperature is 125 + or - 3 K. Temperatures at 1.0 bar are near 165 K and drop to 100-110 K at 0.1 bar; an overlying thermal inversion reaches 133-145 K near 0.03 bar. Temperature profiles for various regions of the planet may be quite similar, with differences due to the presence or absence of a thick cloud near 0.7 bar, close to the temperature where NH3 saturation is expected. Remaining problems in the remote sounding of Jupiter's atmosphere are accurate calibration of the global energy balance, sounding in the presence of significant heterogeneity, and temperature recovery of the thermally inverted stratosphere.

Orton, G. S.↗
NASA NTRS1971

Experiment S026: Ion wake measurement

Measurements of the ion-wake and electron-wake structure and other perturbations of the ambient medium produced by the Gemini spacecraft in orbit are reported. Thruster firings in the TDA-south configuration produced a decrease in the observed ion flux to the outboard ion sensor, an apparent increase in the ion flux to the inboard ion sensor, and an enhanced electron concentration to the outboard electron sensor. Visual inspection of strip-chart data was indicative that definitive wake-cone angles could be determined. It also was apparent for many cases that the electron distribution followed the ion depletion effects; this was indicative that the wake was a plasma, not an ion wake. Analysis of the data from the GATV orbits was indicative that electron and ion temperatures were higher than was estimated. The high electron temperature accounted for the sensor saturation observed during the mission. This temperature measurement was 0.3 electron volt at a 200-n. mi. altitude during daytime conditions. Spacecraft wake structure has been observed as far as 100 feet from the vehicle.

Medved, D. B.↗
DOE OSTI2023

Overview of the Langmuir probe system on the Mega Ampere Spherical Tokamak (MAST) Upgrade

A detailed description of the Langmuir probe system on Mega Ampere Spherical Tokamak Upgrade is presented. The system features 850 tile-embedded probes and 40 bespoke electronic modules that each have the capability to drive and acquire data from up to 16 probes in a time-multiplexed manner. The system provides spatiotemporal-resolved measurements (1 cm and ~1 ms, respectively) in the divertor region of ion saturation current, electron temperature, and floating potential. The standard interpretation of current-voltage (IV) characteristics is to apply a four-parameter fit, based on unmagnetized probe theory, which includes a linear model for the ion saturation region. In conclusion, to mitigate the effect of the magnetic field, analysis is restricted to the region of the IV characteristic, which is sensitive to only the tail of the electron energy distribution function.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1972

Dielectric constant of compressed gaseous and liquid oxygen.

The dielectric constants of compressed gaseous and liquid oxygen were measured on ten isoterms at temperatures between 100 and 300 K and on the saturated liquid boundary at temperatures between 55 and 154 K. Densities ranged from 0.06 to 1.30 grams per cu cm at pressures up to 33 MN per sq m. The dielectric constant measurements were combined with accurate density data to compute the Clausius-Mossotti function. This function was found to decrease for oxygen with density from a value of 0.1236 cu cm per gram at the low density limit to 0.1219 cu cm per gram near the triple point.

Younglove, B. A.↗
DOE OSTI2022

Assessing physics of ion temperature gradient turbulence via hierarchical reduced-model representations

In this work, the saturation physics of ion temperature gradient (ITG) turbulence is probed by studying how amplitudes and scalings with key parameters vary across a hierarchy of reduced models. The models derive from nonlinear fluid equations for toroidal ITG turbulence under approximations to the mode coupling interactions in wavenumber space and the representation of turbulent decorrelation. Mode coupling approximations include local-in-wavenumber treatments like the spectral density of flux in quasilinear theory, a truncation to three nonlinearly interacting waves, and the interactions in a cascade to high radial wavenumber mediated by a single zonal flow. Turbulent decorrelation treatments are based on the triplet correlation time with and without eddy damping. Model fidelity is assessed by the scalings and magnitudes of the squared amplitudes of unstable mode, stable mode, and zonal flow with respect to the flow-damping rate and temperature gradient. It is shown that all models reproduce fundamental scalings, provided they incorporate the coupling of unstable mode, stable mode, and zonal flow. Accurate amplitude prediction requires eddy damping in the triplet correlation time and proper representation of the zonal-flow drive by interactions associated with the radial wavenumber cascade.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2009

Solubility of Sulfur in Shergottitic Silicate Melts Up to 0.8 GPA: Implications for S Contents of Shergottites

Shergottites have high S contents (1300 to 4600 ppm; [1]), but it is unclear if they are sulfide saturated or under-saturated. This issue has fundamental implications for determining the long term S budget of the martian surface and atmosphere (from mantle degassing), as well as evolution of the highly siderophile elements (HSE) Au, Pd, Pt, Re, Rh, Ru, Ir, and Os, since concentrations of the latter are controlled by sulfide stability. Resolution of sulfide saturation depends upon temperature, pressure, oxygen fugacity (and FeO), and magma composition [2]. Expressions derived from experimental studies allow prediction of S contents, though so far they are not calibrated for shergottitic liquids [3-5]. We have carried out new experiments designed to test current S saturation models, and then show that existing calibrations are not suitable for high FeO and low Al2O3 compositions characteristic of shergottitic liquids. The new results show that existing models underpredict S contents of sulfide saturated shergottitic liquids by a factor of 2.

Righter, K.↗
NASA NTRS1988

Effects of eletron heating on the current driven electrostatic ion cyclotron instability and plasma transport processes along auroral field lines

Fluid simulations of the plasma along auroral field lines in the return current region have been performed. It is shown that the onset of electrostatic ion cyclotron (EIC) related anomalous resistivity and the consequent heating of electrons leads to a transverse ion temperature that is much higher than that produced by the current driven EIC instability (CDICI) alone. Two processes are presented for the enhancement of ion heating by anomalous resistivity. The anomalous resistivity associated with the turbulence is limited by electron heating, so that CDICI saturates at transverse temperature that is substantially higher than in the absence of resistivity. It is suggested that this process demonstrates a positive feedback loop in the interaction between CDICI, anomalous resistivity, and parallel large-scale dynamics in the topside ionosphere.

Ganguli, Supriya B.↗
DOE OSTI2020

Two-phase flow measurements and observations in a cooling panel of the reactor cavity cooling system

The analysis of the flow behavior within a cooling panel of a scaled water-cooled reactor cavity cooling system has been performed supported by high-resolution measurements of the void fraction at the risers’ outlet. The results have shown a stable, symmetric distribution of the flow through the risers during subcooled boiling conditions, characterized by small, slow bubbles with average void fraction lower than 0.3 for all risers. As the temperature increased to saturation, flow distribution appeared strongly asymmetrical and unstable, with peaks of void fraction as high as 0.9. Large, faster bubbles were observed during these peaks, immediately followed by flow of subcooled liquid water. Flow stagnation and inversion has also been observed. The high resolution void fraction results, complemented by the measurements of the coolant flow rate and temperatures, not only have further described the behavior of the system under hypothetical accident conditions, but represent a unique set of data to support the validation of system-level codes, and more advanced computational tools.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS2012

Near-Infrared Photon-Counting Camera for High-Sensitivity Observations

The dark current of a transferred-electron photocathode with an InGaAs absorber, responsive over the 0.9-to-1.7- micron range, must be reduced to an ultralow level suitable for low signal spectral astrophysical measurements by lowering the temperature of the sensor incorporating the cathode. However, photocathode quantum efficiency (QE) is known to reduce to zero at such low temperatures. Moreover, it has not been demonstrated that the target dark current can be reached at any temperature using existing photocathodes. Changes in the transferred-electron photocathode epistructure (with an In- GaAs absorber lattice-matched to InP and exhibiting responsivity over the 0.9- to-1.7- m range) and fabrication processes were developed and implemented that resulted in a demonstrated >13x reduction in dark current at -40 C while retaining >95% of the approximately equal to 25% saturated room-temperature QE. Further testing at lower temperature is needed to confirm a >25 C predicted reduction in cooling required to achieve an ultralow dark-current target suitable for faint spectral astronomical observations that are not otherwise possible. This reduction in dark current makes it possible to increase the integration time of the imaging sensor, thus enabling a much higher near-infrared (NIR) sensitivity than is possible with current technology. As a result, extremely faint phenomena and NIR signals emitted from distant celestial objects can be now observed and imaged (such as the dynamics of redshifting galaxies, and spectral measurements on extra-solar planets in search of water and bio-markers) that were not previously possible. In addition, the enhanced NIR sensitivity also directly benefits other NIR imaging applications, including drug and bomb detection, stand-off detection of improvised explosive devices (IED's), Raman spectroscopy and microscopy for life/physical science applications, and semiconductor product defect detection.

Jurkovic, Michael↗