Search NASA⌕ Search

SEARCH · Search NASA

Results for “scaling theory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

Zinc Nucleation and Growth in Microgravity

We report our experiences with zinc nucleation in a microgravity environment aboard NASA's Reduced Gravity Research Facility. Zinc vapor is produced by a heater in a vacuum chamber containing argon gas. Nucleation is induced by cooling and its onset is easily detected visually by the appearance of a cloud of solid, at least partially crystalline zinc particles. Size distribution of these particles is monitored in situ by photon correlation spectroscopy. Samples of particles are also extracted for later analysis by SEM. The initially rapid increase in particle size is followed by a slower period of growth. We apply Scaled Nucleation Theory to our data and find that the derived critical temperature of zinc, the critical cluster size at nucleation, and the surface tension values are all in reasonably good agreement with their accepted literature values.

Michael, B. Patrick↗
NASA NTRS2000

An Estimation of Turbulent Kinetic Energy and Energy Dissipation Rate Based on Atmospheric Boundary Layer Similarity Theory

Algorithms are developed to extract atmospheric boundary layer profiles for turbulence kinetic energy (TKE) and energy dissipation rate (EDR), with data from a meteorological tower as input. The profiles are based on similarity theory and scalings for the atmospheric boundary layer. The calculated profiles of EDR and TKE are required to match the observed values at 5 and 40 m. The algorithms are coded for operational use and yield plausible profiles over the diurnal variation of the atmospheric boundary layer.

Han, Jongil↗
NASA NTRS2001

Estimating Bias Error Distributions

This paper formulates the general methodology for estimating the bias error distribution of a device in a measuring domain from less accurate measurements when a minimal number of standard values (typically two values) are available. A new perspective is that the bias error distribution can be found as a solution of an intrinsic functional equation in a domain. Based on this theory, the scaling- and translation-based methods for determining the bias error distribution arc developed. These methods are virtually applicable to any device as long as the bias error distribution of the device can be sufficiently described by a power series (a polynomial) or a Fourier series in a domain. These methods have been validated through computational simulations and laboratory calibration experiments for a number of different devices.

Liu, Tian-Shu↗
NASA NTRS2004

Transformations in Air Transportation Systems For the 21st Century

Globally, our transportation systems face increasingly discomforting realities: certain of the legacy air and ground infrastructures of the 20th century will not satisfy our 21st century mobility needs. The consequence of inaction is diminished quality of life and economic opportunity for those nations unable to transform from the 20th to 21st century systems. Clearly, new thinking is required regarding business models that cater to consumers value of time, airspace architectures that enable those new business models, and technology strategies for innovating at the system-of-networks level. This lecture proposes a structured way of thinking about transformation from the legacy systems of the 20th century toward new systems for the 21st century. The comparison and contrast between the legacy systems of the 20th century and the transformed systems of the 21st century provides insights into the structure of transformation of air transportation. Where the legacy systems tend to be analog (versus digital), centralized (versus distributed), and scheduled (versus on-demand) for example, transformed 21st century systems become capable of scalability through technological, business, and policy innovations. Where air mobility in our legacy systems of the 20th century brought economic opportunity and quality of life to large service markets, transformed air mobility of the 21st century becomes more equitable available to ever-thinner and widely distributed populations. Several technological developments in the traditional aircraft disciplines as well as in communication, navigation, surveillance and information systems create new foundations for 21st thinking about air transportation. One of the technological developments of importance arises from complexity science and modern network theory. Scale-free (i.e., scalable) networks represent a promising concept space for modeling airspace system architectures, and for assessing network performance in terms of robustness, resilience, and other metrics. The lecture offers an air transportation system topology and a scale-free network linkage graphic as framework for transportation system innovation. Successful outcomes of innovation in air transportation could lay the foundations for new paradigms for aircraft and their operating capabilities, air transportation system topologies, and airspace architectures and procedural concepts. These new paradigms could support scalable alternatives for the expansion of future air mobility to more consumers in more parts of the world.

Holmes, Bruce J.↗
NASA NTRS2004

Einstein Inflationary Probe (EIP)

I will discuss plans to develop a concept for the Einstein Inflation Probe: a mission to detect gravity waves from inflation via the unique signature they impart to the cosmic microwave background (CMB) polarization. A sensitive CMB polarization satellite may be the only way to probe physics at the grand-unified theory (GUT) scale, exceeding by 12 orders of magnitude the energies studied at the Large Hadron Collider. A detection of gravity waves would represent a remarkable confirmation of the inflationary paradigm and set the energy scale at which inflation occurred when the universe was a fraction of a second old. Even a strong upper limit to the gravity wave amplitude would be significant, ruling out many common models of inflation, and pointing to inflation occurring at much lower energy, if at all. Measuring gravity waves via the CMB polarization will be challenging. We will undertake a comprehensive study to identify the critical scientific requirements for the mission and their derived instrumental performance requirements. At the core of the study will be an assessment of what is scientifically and experimentally optimal within the scope and purpose of the Einstein Inflation Probe.

Hinshaw, Gary↗
DOE OSTI2023

Evaluating Scaling Effects of Steam Condensation Physics-based Model for Small Modular Reactor

This study focused on assessing condensation heat transfer (CHT) models for enhancing the passive safety of small modular reactors (SMRs). It also encompassed a review of the theoretical and semi-theoretical CHT models and correlations. Condensation models such as the degradation factor, heat and mass transfer analogy (HMTA), and boundary layer models are used to study advanced nuclear reactor PCCS. The previous CHT models were developed for small tube geometries, which differ from the containment of SMR. This study examined the scaled relations of a physics-based CHT model for analyzing laminar and turbulent film condensation downward flow conditions inside scaled tube geometries.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2023

Presentation: Evaluating scaling effects of steam condensation physics-based model for small modular reactors safety

This study focused on assessing condensation heat transfer (CHT) models for enhancing the passive safety of small modular reactors (SMRs). It also encompassed a review of the theoretical and semi-theoretical CHT models and correlations. Condensation models such as the degradation factor, heat and mass transfer analogy (HMTA), and boundary layer models are used to study advanced nuclear reactor PCCS. The previous CHT models were developed for small tube geometries, which differ from the containment of SMR. This study examined the scaled relations of a physics-based CHT model for analyzing laminar and turbulent film condensation downward flow conditions inside scaled tube geometries.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

N 5 -Scaling Excited-State-Specific Perturbation Theory

In this paper, we show that by working in a basis similar to that of the natural transition orbitals and using a modified zeroth-order Hamiltonian, the cost of a recently introduced perturbative correction to excited-state mean field theory can be reduced from seventh to fifth order in the system size. The (occupied) 2 (virtual) 3 asymptotic scaling matches that of ground-state second-order Møller-Plesset theory but with a significantly higher prefactor because the bottleneck is iterative: it appears in the Krylov-subspace-based solution of the linear equation that yields the first-order wave function. Here, we discuss the details of the modified zeroth-order Hamiltonian we use to reduce the cost and the automatic code generation process we used to derive and verify the cost scaling of the different terms. Overall, we find that our modifications have little impact on the method's accuracy, which remains competitive with singles and doubles equation-of-motion coupled cluster.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Graph-based quantum response theory and shadow Born–Oppenheimer molecular dynamics

Graph-based linear scaling electronic structure theory for quantum-mechanical molecular dynamics simulations [A. M. N. Niklasson et al., J. Chem. Phys. 144, 234101 (2016)] is adapted to the most recent shadow potential formulations of extended Lagrangian Born–Oppenheimer molecular dynamics, including fractional molecular-orbital occupation numbers [A. M. N. Niklasson, J. Chem. Phys. 152, 104103 (2020) and A. M. N. Niklasson, Eur. Phys. J. B 94, 164 (2021)], which enables stable simulations of sensitive complex chemical systems with unsteady charge solutions. The proposed formulation includes a preconditioned Krylov subspace approximation for the integration of the extended electronic degrees of freedom, which requires quantum response calculations for electronic states with fractional occupation numbers. For the response calculations, we introduce a graph-based canonical quantum perturbation theory that can be performed with the same natural parallelism and linear scaling complexity as the graph-based electronic structure calculations for the unperturbed ground state. Further, the proposed techniques are particularly well-suited for semi-empirical electronic structure theory, and the methods are demonstrated using self-consistent charge density-functional tight-binding theory both for the acceleration of self-consistent field calculations and for quantum-mechanical molecular dynamics simulations. Graph-based techniques combined with the semi-empirical theory enable stable simulations of large, complex chemical systems, including tens-of-thousands of atoms.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Nonparametric extensions of nuclear equations of state: Probing the breakdown scale of relativistic mean-field theory

Phenomenological calculations of the properties of dense matter, such as relativistic mean-field theories, represent a pathway to predicting the microscopic and macroscopic properties of neutron stars. However, such theories do not generically have well-controlled uncertainties and may break down within neutron stars. To faithfully represent the uncertainty in this breakdown scale, we develop a hybrid representation of the dense-matter equation of state, which assumes the form of a relativistic mean-field theory at low densities, while remaining agnostic to any nuclear theory at high densities. To achieve this, we use a nonparametric equation of state model to incorporate the correlations of the underlying relativistic mean-field theory equation of state at low pressures and transition to more flexible correlations above some chosen pressure scale. We perform astrophysical inference under various choices of the transition pressure between the theory-informed and theory-agnostic models. Here, we further study whether the chosen relativistic mean-field theory breaks down above some particular pressure and find no such evidence. Using simulated data for future astrophysical observations at about two-to-three times the precision of current constraints, we show that our method can identify the breakdown pressure associated with a potential strong phase transition.

Equations of state of nuclear matter↗
NASA NTRS1993

Structural similitude and design of scaled down laminated models

The excellent mechanical properties of laminated composite structures make them prime candidates for wide variety of applications in aerospace, mechanical and other branches of engineering. The enormous design flexibility of advanced composites is obtained at the cost of large number of design parameters. Due to complexity of the systems and lack of complete design based informations, designers tend to be conservative in their design. Furthermore, any new design is extensively evaluated experimentally until it achieves the necessary reliability, performance and safety. However, the experimental evaluation of composite structures are costly and time consuming. Consequently, it is extremely useful if a full-scale structure can be replaced by a similar scaled-down model which is much easier to work with. Furthermore, a dramatic reduction in cost and time can be achieved, if available experimental data of a specific structure can be used to predict the behavior of a group of similar systems. This study investigates problems associated with the design of scaled models. Such study is important since it provides the necessary scaling laws, and the factors which affect the accuracy of the scale models. Similitude theory is employed to develop the necessary similarity conditions (scaling laws). Scaling laws provide relationship between a full-scale structure and its scale model, and can be used to extrapolate the experimental data of a small, inexpensive, and testable model into design information for a large prototype. Due to large number of design parameters, the identification of the principal scaling laws by conventional method (dimensional analysis) is tedious. Similitude theory based on governing equations of the structural system is more direct and simpler in execution. The difficulty of making completely similar scale models often leads to accept certain type of distortion from exact duplication of the prototype (partial similarity). Both complete and partial similarity are discussed. The procedure consists of systematically observing the effect of each parameter and corresponding scaling laws. Then acceptable intervals and limitations for these parameters and scaling laws are discussed. In each case, a set of valid scaling factors and corresponding response scaling laws that accurately predict the response of prototypes from experimental models is introduced. The examples used include rectangular laminated plates under destabilizing loads, applied individually, vibrational characteristics of same plates, as well as cylindrical bending of beam-plates.

Simitses, G. J.↗
NASA NTRSDate not supplied

Progressive Damage Response of 3D Woven Composites via the Multiscale Recursive Micromechanics Solution with Tailored Fidelity

Progressive failure simulations have been performed for orthogonal 3D woven composites consisting of RTM6 resin matrix and AS4 carbon fibers. The Multiscale Recursive Micromechanics approach has been used, which, while being computationally efficient, captures the primary effects of the microstructure at each considered length scale. This approach also enables use of any micromechanics theory at any length scale, and herein, the fidelity of the chosen theories across the scales has been tailored to strike a balance with computational efficiency. The Mori-Tanaka method is employed at the lowest length scale, the Generalized Method of Cells is used at intermediate scales, and the High-Fidelity Generalized Method of Cells is used at the highest woven composite repeating unit cell scale. Furthermore, two different damage models, also with different levels of fidelity and efficiency, have been used for the resin material at the lowest length scale. Results for the mechanical behavior in response to loading in various directions are compared for the two damage models and with available test data.

3D woven↗
DOE OSTI2019

A finite scale model for shock structure

In this paper we explore the use of a finite scale model of fluid dynamics to predict the finite structure of a shock wave in a perfect gas. We begin by documenting the history and issues that have arisen when Navier–Stokes theory is applied to the shock structure problem, and continue by motivating the improvement that finite scale theory might provide from its representation of inviscid (anomalous) dissipation. Furthermore, our primary results include the formulation of a traveling wave equation from finite scale theory, an analysis of the solutions of that equation as regards shock width and monotonicity properties, and an estimation of the critical parameter of the theory from experimental data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS2000

Measurement of the Heat Capacity of He-II Under a Heat Current Near the Lambda Transition

We present preliminary measurements of the heat capacity of superfluid helium-4 under an applied heat current near the lambda transition. The calorimeter is a standard cylindrical thermal conductivity cell with a 0.6 mm gap between two copper endplates. The sidewall is made of stainless steel. A heat current density in the range of 1 to 4 microW/sq cm is applied through the helium sample while a pulse method is used to measure the heat capacity. Temperature changes are recorded with high-resolution thermometers (HRTs) located on the top and bottom endplates. Corrections are made to the readings of the HRTs to account for the Kapitza boundary resistance and the anomalous Kapitza boundary resistance. After the corrections, both the top and the bottom HRTs. give the same heat capacity values. The heat capacity is found to be much larger than the prediction of recent theories. We also plotted our data on a scaled plot to test the prediction of scaling by the theories. The result and its interpretation will be presented. The cell height was deliberately made to be thin to reduce the effects of gravity. Nonetheless, gravity is expected to have significant effects on the heat capacity data in the temperature range of our measurement. A space experiment would remove this unwanted gravity effect and allow the true physics to be examined. Moreover, in the absence of gravity, a deeper cell can be used allowing HRTs to be mounted on to the sidewall providing direct measurements of the helium temperature, unaffected by the anomalous Kapitza boundary resistance.

Harter, Alexa W.↗
DOE OSTI2025

A species scale-driven breakdown of effective field theory in time-dependent string backgrounds

We present a novel way in which effective field theory (EFT) can break down in cosmological string backgrounds depending on the behavior of the quantum gravity cutoff in infinite distance limits, known as the species scale $Λ_s$. Namely, EFT can break down if the species scale $Λ_s$ falls off so rapidly as the Friedmann-Robertson-Walker (FRW) scale factor grows from some initial value $a_i$ to some final value $a_f$ that the physical momentum of an initial Hubble-sized perturbation $\sim H_i^{-1}$ grows to exceed the species scale. For EFT to remain valid, a new condition $H_i \frac{a_i}{a_f} \ll Λ_{s,f}$ must hold, which is distinct from Trans-Planckian conditions discussed in the literature. Using the universal relation $\frac{\nabla m}{m} \cdot \frac{\nabla Λ_s}{Λ_s} = \frac{1}{d-2}$ in the infinite distance limits of moduli space where $m$ is the mass scale of the lightest tower and $\nabla$ measures variations with respect to the canonical metric on moduli space, we show that spatially flat FRW solutions in the string landscape violate this condition or at best marginally satisfy it. However, we find that sufficiently large negative spatial curvature always avoids a breakdown. To avoid EFT breakdown, we derive an upper bound on the duration of quasi-de Sitter expansion that classically evolves to decelerated expansion. Our bound is proportional to the Trans-Planckian Censorship Conjecture (TCC) bound, with the advantage that it applies to any FRW solution in the string landscape. Finally, we distinguish EFT breakdown from TCC violation, the latter being a quantum gravity constraint rather than an EFT limitation. Perhaps our most surprising finding is that in any flat FRW solution that develops a weakly coupled string at future infinity the EFT inevitably breaks down.

Cosmology and Nongalactic Astrophysics (astro-ph.C↗
NASA NTRS1979

Varying G

The problem of the variation of the gravitational constant with cosmological time is critically analyzed. Since Einstein's equation does not allow G to vary on any time scale, no observational data can be analyzed within the context of the standard theory. The recently proposed scale covariant theory, which allows (but does not demand) G to vary, and which has been shown to have passed several standard cosmological tests, is employed to discuss some recent nonnull observational results which indicate a time variation of G.

Canuto, V.↗
DOE OSTI2025

Scalable phononic metamaterials: Tunable bandgap design and multi-scale experimental validation

Phononic metamaterials offer unprecedented control over wave propagation, making them essential for applications such as vibration isolation, waveguiding, and acoustic filtering. However, achieving scalable and precisely tunable bandgap properties across different length scales remains challenging. This study presents a user-friendly design framework for phononic metamaterials, enabling ultra-wide bandgap tunability (B/ω c ratios up to 172 %) across multiple frequency ranges and scales. Using finite element simulations of a Yablonovite-inspired unit cell, we establish a comprehensive parametric design space that illustrates how geometric parameters, such as sphere size and beam diameter, controls bandgap width and frequency. The scalability and robustness of the framework are validated through experimental testing on additively manufactured structures at both macro (10 mm) and micro (80 µm) scales, fabricated using Stereolithography and Two-Photon Polymerization. Transmission loss measurements, conducted with piezoelectric transducers and laser vibrometry, closely match simulations in the kHz and MHz frequency ranges, confirming the reliability and consistency of the bandgap behavior across scales. This work bridges theory and experiments at multiple scales, offering a practical methodology for the rapid design of phononic metamaterials and expanding their potential for diverse applications across a broad range of frequencies.

36 MATERIALS SCIENCE↗
NASA NTRS2012

Turbulence in a Global Magnetohydrodynamic Simulation of the Earth's Magnetosphere during Northward and Southward Interplanetary Magnetic Field

We report the results of MHD simulations of Earth's magnetosphere for idealized steady solar wind plasma and interplanetary magnetic field (IMF) conditions. The simulations feature purely northward and southward magnetic fields and were designed to study turbulence in the magnetotail plasma sheet. We found that the power spectral densities (PSDs) for both northward and southward IMF had the characteristics of turbulent flow. In both cases, the PSDs showed the three scale ranges expected from theory: the energy-containing scale, the inertial range, and the dissipative range. The results were generally consistent with in-situ observations and theoretical predictions. While the two cases studied, northward and southward IMF, had some similar characteristics, there were significant differences as well. For southward IMF, localized reconnection was the main energy source for the turbulence. For northward IMF, remnant reconnection contributed to driving the turbulence. Boundary waves may also have contributed. In both cases, the PSD slopes had spatial distributions in the dissipative range that reflected the pattern of resistive dissipation. For southward IMF there was a trend toward steeper slopes in the dissipative range with distance down the tail. For northward IMF there was a marked dusk-dawn asymmetry with steeper slopes on the dusk side of the tail. The inertial scale PSDs had a dusk-dawn symmetry during the northward IMF interval with steeper slopes on the dawn side. This asymmetry was not found in the distribution of inertial range slopes for southward IMF. The inertial range PSD slopes were clustered around values close to the theoretical expectation for both northward and southward IMF. In the dissipative range, however, the slopes were broadly distributed and the median values were significantly different, consistent with a different distribution of resistivity.

magnetohydrodynamics (MHD)↗