Search NASA⌕ Search

SEARCH · Search NASA

Results for “scattering patterns”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Various facets of magnetic charge correlation: Micromagnetic and distorted-wave Born approximation simulations study

The emergent concept of the magnetic charge quasiparticle provides a new realm to study the evolution of magnetic properties in two-dimensional artificially frustrated magnets. Here we report on the exploration of magnetic phases due to various magnetic charge correlation using the complementary numerical techniques of micromagnetic and distorted-wave Born approximation simulations in artificial permalloy honeycomb lattice. The honeycomb element length varies between 10 nm and 100 nm, while the width and thickness are kept within the single domain limit. In addition to the charge ordered loop state, we observe disordered charge arrangement, characterized by the random distribution of ±Q charges, in single domain size honeycomb lattice. As the length of the honeycomb element increases, low multiplicity magnetic charges tend to form contiguous bands in thinner lattice. Thin honeycomb lattice with 100 nm element length exhibits a perfect spin ice pattern, which remains unaffected by the modest increase in the width of element size. We simulate scattering profiles under the pretext of distorted-wave Born approximation formalism for the micromagnetic phases. The results are expected to provide useful guidance in the experimental investigation of magnetic phases in an artificial honeycomb magnet.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Biochemical and structural insights into SARS-CoV-2 polyprotein processing by Mpro

SARS-CoV-2, a human coronavirus, is the causative agent of the COVID-19 pandemic. Its genome is translated into two large polyproteins subsequently cleaved by viral papain-like protease and main protease (Mpro). Polyprotein processing is essential yet incompletely understood. We studied Mpro-mediated processing of the nsp7-11 polyprotein, whose mature products include cofactors of the viral replicase, and identified the order of cleavages. Integrative modeling based on mass spectrometry (including hydrogen-deuterium exchange and cross-linking) and x-ray scattering yielded a nsp7-11 structural ensemble, demonstrating shared secondary structural elements with individual nsps. The pattern of cross-links and HDX footprint of the C145A Mpro and nsp7-11 complex demonstrate preferential binding of the enzyme active site to the polyprotein junction sites and additional transient contacts to help orient the enzyme on its substrate for cleavage. Last, proteolysis assays were used to characterize the effect of inhibitors/binders on Mpro processing/inhibition using the nsp7-11 polyprotein as substrate.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Deeply learning deep inelastic scattering kinematics

We study the use of deep learning techniques to reconstruct the kinematics of the neutral current deep inelastic scattering (DIS) process in electron–proton collisions. In particular, we use simulated data from the ZEUS experiment at the HERA accelerator facility, and train deep neural networks to reconstruct the kinematic variables Q 2 and x. Our approach is based on the information used in the classical construction methods, the measurements of the scattered lepton, and the hadronic final state in the detector, but is enhanced through correlations and patterns revealed with the simulated data sets. We show that, with the appropriate selection of a training set, the neural networks sufficiently surpass all classical reconstruction methods on most of the kinematic range considered. Rapid access to large samples of simulated data and the ability of neural networks to effectively extract information from large data sets, both suggest that deep learning techniques to reconstruct DIS kinematics can serve as a rigorous method to combine and outperform the classical reconstruction methods.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Determination of the Structures of Lignin Subunits and Nanoparticles in Solution by Small‐Angle Neutron Scattering: Towards Improving Lignin Valorization

Abstract Lignin nanoparticles (LNPs) are usually produced from lignin solution through supersaturation. The structure of the lignin in solution is still poorly understood due to structural variability of isolated lignins. Here, lignins were extracted from different plants to establish a general pattern of their structure in several lignin solvents. Lignin molecules (lignin subunits) and larger aggregates were observed in dimethyl sulfoxide (DMSO), ethylene glycol (EG) and 0.1 N NaOD solutions by small‐angle neutron scattering (SANS). It was proposed that the aggregates were composed of lignin subunits with a higher molecular weight and a higher ratio of the aliphatic to phenolic hydroxyl groups. The size, shape, and compactness are important factors that affect the uses of the LNPs, which were obtained from the SANS data for the first time. A discrepancy in the radius between SANS and DLS was discovered, pointing to a large hydration shell around the LNPs in aqueous solutions. The cytotoxicity of the corncob lignin, kraft lignin, and their LNPs were measured and compared.

Zhang, Xin↗
DOE OSTI2021

Quantitative agreement between dynamical rocking curves in ultrafast electron diffraction for x-ray lasers

Electron diffraction through a thin patterned silicon membrane can be used to create complex spatial modulations in electron distributions. By precisely varying parameters such as crystallographic orientation and wafer thickness, the intensity of reflections in the diffraction plane can be controlled and by placing an aperture to block all but one spot, we can form an image with different parts of the patterned membrane, as is done for bright-field imaging in microscopy. The patterned electron beams can then be used to control phase and amplitude of subsequent x-ray emission, enabling novel coherent x-ray methods. Furthermore, the electrons themselves can also be used for femtosecond time resolved diffraction and microscopy. As a first step toward patterned beams, we demonstrate experimentally and through simulation the ability to accurately predict and control diffraction spot intensities. We simulate MeV transmission electron diffraction patterns using the multislice method for various crystallographic orientations of a single crystal Si(001) membrane near beam normal. The resulting intensity maps of the Bragg reflections are compared to experimental results obtained at the Accelerator Structure Test Area Ultrafast Electron Diffraction (ASTA UED) facility at SLAC. Furthermore, the fraction of inelastic and elastic scattering of the initial charge is estimated along with the absorption of the membrane to determine the contrast that would be seen in a patterned version of the Si(001) membrane.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Flower‐Type Organized Trade‐Wind Cumulus: A Multi‐Day Lagrangian Large Eddy Simulation Intercomparison Study

Shallow cumulus cloud fields in subtropical marine trade wind environments, particularly over the tropical Atlantic Ocean, show distinct organizational patterns. Among these, Flower‐type clouds are characterized by expansive stratiform cloud patches surrounded by regions of scattered convection. The objectives of this study were (a) to construct a case study of a time period during the EUREC 4 A/ATOMIC field campaign when Flower‐type organization was observed, (b) to evaluate the fidelity of a multi‐model ensemble of large eddy simulations of that case, and (c) to analyze the interaction between cloud and precipitation processes and mesoscale organization in the simulations. The simulations follow a quasi‐Lagrangian trajectory, allowing mesoscale features to develop over time in a domain that follows the boundary‐layer airmass. The results show a broad agreement in simulated thermodynamic properties across different LES codes, with Flower‐type cloud patches appearing within hours of each other. The consensus among models is consistent with observations made during the EUREC 4 A/ATOMIC field campaign on the specific day of interest. The cloud structure reveals three distinct peaks in the joint probability densities of cloud base and cloud top height, with the dominant peak at any given time influenced by the stage of cloud organization. The simulated cloud system evolution reveals consistent occurrence of maxima in liquid water path and rain rate before Flower reaches its maximum length scale. Targeted sensitivity tests reveal a weak relationship between Cloud Droplet Number concentration and the extent/degree/type of organization.

EUREC4A↗
DOE OSTI2023

Probing three-dimensional mesoscopic interfacial structures in a single view using multibeam X-ray coherent surface scattering and holography imaging

Abstract Visualizing surface-supported and buried planar mesoscale structures, such as nanoelectronics, ultrathin-film quantum dots, photovoltaics, and heterogeneous catalysts, often requires high-resolution X-ray imaging and scattering. Here, we discovered that multibeam scattering in grazing-incident reflection geometry is sensitive to three-dimensional (3D) structures in a single view, which is difficult in conventional scattering or imaging approaches. We developed a 3D finite-element-based multibeam-scattering analysis to decode the heterogeneous electric-field distribution and to faithfully reproduce the complex scattering and surface features. This approach further leads to the demonstration of hard-X-ray Lloyd’s mirror interference of scattering waves, resembling dark-field, high-contrast surface holography under the grazing-angle scattering conditions. A first-principles calculation of the single-view holographic images resolves the surface patterns’ 3D morphology with nanometer resolutions, which is critical for ultrafine nanocircuit metrology. The holographic method and simulations pave the way for single-shot structural characterization for visualizing irreversible and morphology-transforming physical and chemical processes in situ or operando .

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

IMS Rapid Response FY21 Summary Report for: Integrating Patterned Probes with Four-Dimensional Scanning Transmission Electron Microscopy for Unrivaled Crystallographic Structure Determination in Nanomaterials

The initial goal of our 4-dimensional scanning transmission electron microscopy (4D-STEM)-based project was to develop strain resolution two orders of magnitude better than what is now currently possible with electron-based scattering techniques, all while collecting scattering information from 7 different tilt axes at one time [multi-beam electron diffraction (MBED)1 ] through the development of a new electron probe-forming aperture with non-circular features (patterned probes 2 ). We set out to accomplish this through a collaboration with Drs. Colin Ophus and Ben Savitsky at Lawrence Berkeley Laboratory (they are the world-leading experts in developing the complex computational codes required to perform orientation analysis and quantitative strain mapping on our 4D-STEM data sets. We are motivated to invest in this area as it will be the only technique sensitive enough to perform three- dimensional automated crystallographic orientation mapping (ACOM) and strain mapping for materials exposed to external stimulus (a focus of our larger efforts).

36 MATERIALS SCIENCE↗
DOE OSTI2026

Projective imaging of high-energy nuclei via coherent exclusive vector meson production in electron-nucleus collisions

One of the major goals of modern nuclear experiments is to study the distributions of gluons inside nuclei at high energy. A key measurement is the coherent exclusive vector meson (VM) production in diffractive electron-nucleus collisions, where the gluon spatial distribution inside the nucleus can be obtained through a Fourier transform of the squared nuclear momentum transfer (|t|) distribution. This research aims to overcome the two main obstacles of the |t| measurement: limited precision in measuring |t| arising from the momentum resolution of the outgoing electron and the overwhelming incoherent background. We demonstrate that by measuring the projected |t| distribution along the direction perpendicular to the electron scattering plane, the effect of the outgoing electron’s momentum resolution can be effectively mitigated, and the diffractive pattern is largely restored. Furthermore, we propose to measure the angular distribution of the VM’s decay daughters to statistically remove the incoherent background.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Statistical Study of the Nonthermal Continuum Radiation Beaming Angle Measured by the High Frequency Receiver on Van Allen Probes-A

The nonthermal continuum (NTC) radiation beaming angle is computed over the entire Van Allen Probes-A mission when the spacecraft was in the dawn sector. The conditions in the dawn sector are favorable for the wave vector to lie near/in the spacecraft's spin plane allowing a favorable estimate of the beaming angle, and the dawn sector is also advantageous in that previous studies show NTC occurrence to peak in this sector. We found that scatter plots, over the entire mission, of beaming angle versus magnetic latitude form a distinct inverted-V pattern, with the apex at/near the magnetic equator. This pattern was sharpest for frequencies ( f ) ≲ 100 kHz. Using the NTC beaming formula from the linear mode conversion theory (LMCT), we show that such an inverted-V pattern is expected due to the large variation in the plasmapause location over the entire mission. The theoretical derived pattern qualitatively reproduces the observed pattern but not quantitatively. The lack of quantitative agreement is discussed and is attributed to several factors, one factor is off-centered emissions from the radio window. The qualitative agreement strongly supports LMCT as being the dominant mechanism generating NTC for f ≲ 100 kHz. For f ≳ 100 kHz, the inverted-V pattern becomes less distinct, and strong near-equatorial beaming is observed. Finally, after considering contamination of our selections by left-handed polarized AKR, our study suggests that besides LMCT another unidentified NTC generation mechanism becomes important for f ≳ 100 kHz.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Emergent interlayer magnetic order via strain-induced orthorhombic distortion in the 5 d Mott insulator Sr 2 IrO 4

In this letter, we report a La 2 CuO 4 -like interlayer antiferromagnetic order in Sr2IrO4 films with large orthorhombic distortion (>1.5%). The biaxial lattice strain in epitaxial heterostructures of Sr 2 IrO 4 /Ca 3 Ru 2 O 7 lowers the crystal symmetry of Sr 2 IrO 4 from tetragonal ($C_4$) to orthorhombic ($C_2$), guiding the Ir $5d J_{text{eff}}$ = 1/2 pseudospin moment parallel to the elongated b axis via magnetic anisotropy. From resonant x-ray scattering experiments, we observed an antiferromagnetic order in the orthorhombic Sr 2 IrO 4 film whose interlayer stacking pattern is inverted from that of the tetragonal Sr 2 IrO 4 crystal. This interlayer stacking is similar to that of the orthorhombic La 2 CuO 4 , implying that the asymmetric interlayer exchange interactions between $\textit{a}$ and $\textit{b}$ directions exceed the anisotropic interlayer pseudodipolar interaction. Our result suggests that strain-induced distortion can provide a delicate knob for tuning the long-range magnetic order in quasi-two-dimensional systems by evoking the competition between the interlayer exchange coupling and the pseudodipolar interaction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Shell structure in 32P

The nuclear structure of 32P was investigated by detecting multi-γ coincidences along with charged light ions following the bombardment of an 18O target with a 30-MeV 16O beam from the Florida State University accelerator facility using the Clarion2-Trinity array of Clover γ spectrometers and GAGG (Gd-Al-Ga-garnet) scintillators for charged particles. A number of new states up to 12 MeV excitation and spins up to 9+ were observed by their γ decay patterns. Spins and parities were assigned by comparing measured γ angular distributions with polarizations inferred from Compton-scattering asymmetries between the Ge crystals in the Clover spectrometers. The new level scheme of 32P compares well with shell model calculations using the FSU cross-shell interaction and reasonably well with those using the sdpf-m interaction. In particular, structures with higher spin arise from promotion of more nucleons up to the f-p shell.

Allmond, James [ORNL] (ORCID:0000000165338721)↗
DOE OSTI2023

Cosmic topology. Part I. Limits on orientable Euclidean manifolds from circle searches

The Einstein field equations of general relativity constrain the local curvature at every point in spacetime, but say nothing about the global topology of the Universe. Cosmic microwave background anisotropies have proven to be the most powerful probe of non-trivial topology since, within ΛCDM, these anisotropies have well-characterized statistical properties, the signal is principally from a thin spherical shell centered on the observer (the last scattering surface), and space-based observations nearly cover the full sky. The most generic signature of cosmic topology in the microwave background is pairs of circles with matching temperature and polarization patterns. No such circle pairs have been seen above noise in the WMAP or Planck temperature data, implying that the shortest non-contractible loop around the Universe through our location is longer than 98.5% of the comoving diameter of the last scattering surface. We translate this generic constraint into limits on the parameters that characterize manifolds with each of the nine possible non-trivial orientable Euclidean topologies, and provide a code which computes these constraints. In all but the simplest cases, the shortest non-contractible loop in the space can avoid us, and be shorter than the diameter of the last scattering surface by a factor ranging from 2 to at least 6. Further, this result implies that a broader range of manifolds is observationally allowed than widely appreciated. Probing these manifolds will require more subtle statistical signatures than matched circles, such as off-diagonal correlations of harmonic coefficients.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Nanoscale dynamics during self-organized ion beam patterning of Si. II. Kr + bombardment

Understanding the self-organized ion beam nanopatterning of elemental semiconductors, particularly silicon, is of intrinsic scientific and technological interest. This is the second component of a two-part coherent x-ray scattering and x-ray photon correlation spectroscopy (XPCS) investigation of the kinetics and fluctuation dynamics of nanoscale ripple development on silicon during 1 keV Ar + (part I) and Kr + bombardment at 65° polar angle. Here it is found that the ion-enhanced viscous flow relaxation is essentially equal for Kr + -induced patterning as previously found for Ar + patterning despite the difference in ion masses. However, the magnitude of the surface curvature-dependent roughening rate in the early-stage kinetics is larger for Kr + than for Ar + , consistent with expectations that the heavier ion gives an increased mass redistributive contribution to the initial surface instability. As with the Ar + case, fluctuation dynamics in the late stage show a peak in correlation times at the length scale corresponding to the dominant structural feature on the surface—the ripples. Finally, it is shown that speckle motion during the surface evolution can be analyzed to determine spatial inhomogeneities in erosion rate and ripple velocity. This allows the direction and speed of ripple motion to be measured in a real time experiment. In the present case, ripple motion is found to be into the projected direction of the ion source, in contrast to expectations from an existing sputter erosion driven model with parameters derived from binary collision approximation simulations.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Simulation of Electron-Proton Scattering Events by a Feature-Augmented and Transformed Generative Adversarial Network (FAT-GAN)

We apply generative adversarial network (GAN) technology to build an event generator that simulates particle production in electron-proton scattering that is free of theoretical assumptions about underlying particle dynamics. The difficulty of efficiently training a GAN event simulator lies in learning the complicated patterns of the distributions of the particles physical properties. We develop a GAN that selects a set of transformed features from particle momenta that can be generated easily by the generator, and uses these to produce a set of augmented features that improve the sensitivity of the discriminator. The new Feature-Augmented and Transformed GAN (FAT-GAN) is able to faithfully reproduce the distribution of final state electron momenta in inclusive electron scattering, without the need for input derived from domain-based theoretical assumptions. The developed technology can play a significant role in boosting the science of existing and future accelerator facilities, such as the Electron-Ion Collider.

Alanazi, Yasir↗
DOE OSTI2025

Extrusion‐Based Printing of Nanostructured Fatty Acid Gels Incorporated in Hydrogels

Soft materials with unique nanostructures such as lamellar, hexagonal, and cubic morphologies can replicate complex structures that have potential in various fields, including biomedical and industrial applications. However, a key challenge in advancing the broader applications of 3D printing for these nanostructured soft materials is insufficient mechanical properties that hinder their printability and compromise structural stability in the final product. In this study, the suitability of a fatty acid‐based lamellar gel is evaluated for direct extrusion‐based 3D printing. Here, the lamellar gel with varying water content is integrated with a photocurable hydrogel to preserve the shape and stability of the final prints. Complex 2D and 3D design patterns are used to assess extrusion behavior, structural stability, and print precision under varying pressures. Small‐angle X‐ray Scattering (SAXS) measurements reveal the formation of lamellar nanostructures and confirm their retention after photocuring in various gels. Rheological analysis confirms that these gels exhibit key properties suitable for extrusion‐based 3D printing, such as shear‐thinning behavior. Additionally, tensile testing is conducted to evaluate the mechanical properties across cured print samples. This study underscores the potential of nanostructured gels as a robust and versatile platform, facilitating the development of materials engineered for various applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Synchrotron small-angle X-ray scattering technique for battery electrode study

Structure dependent stability is a concern for the achievement of high energy density electrode with long cycling lifetime, especially for alloying-type and conversion-type anodes. Substantial alterations in volume upon discharge-discharge process leads to particle pulverization and continuous consumption of electrolyte. Moreover, the nucleation and growth mechanism of Li 2 O and Li 2 S, which determines the rate performance of Li-O 2 and Li-S batteries, are still understudy. Microstructure characterization techniques have been applied to disclose the structural changes of active material at different charge/discharge states. Synchrotron small-angle X-ray scattering (SAXS) attracts considerable attention because of the high flux, high time resolution and nondestructive characteristics. In addition, SAXS patterns provide statistics structural information of electrode at micrometer scale. The commonly used coin cell with punched holes simplifies the application of in situ/operando SAXS measurement. Here, this review discusses the research about the SAXS technique in the characterization of electrode in different batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

Non-Equilibrium Effects in Quantum Magnets

While most often the state of a material will tend toward an equilibrium determined by its environment, there are many cases of scientific and technological interest where materials are manipulated to be or are found in non-equilibrium configurations. For example, data can be stored in hard drives by deliberately altering the magnetic orientation in a material to store information in non-equilibrium pattern. In this project, the main goals were studies of non-equilibrium properties of quantum magnets using neutron scattering as the primary experimental method. Neutron scattering allows characterization of magnetic correlation lengths sensitive to the presence of defects. It can also be used to distinguish equilibrium from non-equilibrium states via energy transfer rates. Typical bulk state magnetization relaxation times are too short to perform many neutron scattering measurements of interest. To enable the study of non-equilibrium conditions, materials with longer magnetic relaxation times were targeted. CoNb 2 O 6 was used in two experiments related to non-equilibrium physics. In the first, evidence for defects created via the Kibble-Zurek mechanism (KZM) was sought by quenching across a magnetic field-dependent phase transition. Somewhat unexpectedly, clear evidence for KZM-induced defects was absent. Additional measurements of CoNb 2 O 6 were made to better characterize its crystal field and other properties to provide a better theoretical understanding to enable more effective non-equilibrium physics measurements. In another project, LiHo 0.45 Y 0.55 F 4 was used to compare a quantum annealing protocol to a thermal annealing one since magnetic fields can be used to control the thermal fluctuations in LiHo 0.45 Y 0.55 F 4 . In addition, a new pulsed magnet power supply and new techniques were developed suitable for neutron scattering experimental environments to enable faster magnetic field changes for producing non-equilibrium conditions. The power supply developed for this project has wider technological applications in addition to faster magnetic field ramps.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗