Search NASA⌕ Search

SEARCH · Search NASA

Results for “sector”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Source sector and fuel contributions to ambient PM 2.5 and attributable mortality across multiple spatial scales

Ambient fine particulate matter (PM 2.5 ) is the world’s leading environmental health risk factor. Reducing the PM 2.5 disease burden requires specific strategies that target dominant sources across multiple spatial scales. We provide a contemporary and comprehensive evaluation of sector- and fuel-specific contributions to this disease burden across 21 regions, 204 countries, and 200 sub-national areas by integrating 24 global atmospheric chemistry-transport model sensitivity simulations, high-resolution satellite-derived PM 2.5 exposure estimates, and disease-specific concentration response relationships. Globally, 1.05 (95% Confidence Interval: 0.74–1.36) million deaths were avoidable in 2017 by eliminating fossil-fuel combustion (27.3% of the total PM 2.5 burden), with coal contributing to over half. Other dominant global sources included residential (0.74 [0.52–0.95] million deaths; 19.2%), industrial (0.45 [0.32–0.58] million deaths; 11.7%), and energy (0.39 [0.28–0.51] million deaths; 10.2%) sectors. Our results show that regions with large anthropogenic contributions generally had the highest attributable deaths, suggesting substantial health benefits from replacing traditional energy sources.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Impacts of climate change, population growth, and power sector decarbonization on urban building energy use

Climate, technologies, and socio-economic changes will influence future building energy use in cities. However, current low-resolution regional and state-level analyses are insufficient to reliably assist city-level decision-making. Here we estimate mid-century hourly building energy consumption in 277 U.S. urban areas using a bottom-up approach. The projected future climate change results in heterogeneous changes in energy use intensity (EUI) among urban areas, particularly under higher warming scenarios, with on average 10.1–37.7% increases in the frequency of peak building electricity EUI but over 110% increases in some cities. For each 1 °C of warming, the mean city-scale space-conditioning EUI experiences an average increase/decrease of ~14%/ ~ 10% for space cooling/heating. Heterogeneous city-scale building source energy use changes are primarily driven by population and power sector changes, on average ranging from –9% to 40% with consistent south–north gradients under different scenarios. Across the scenarios considered here, the changes in city-scale building source energy use, when averaged over all urban areas, are as follows: –2.5% to –2.0% due to climate change, 7.3% to 52.2% due to population growth, and –17.1% to –8.9% due to power sector decarbonization. Our findings underscore the necessity of considering intercity heterogeneity when developing sustainable and resilient urban energy systems.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Corrigendum: A review of trends and drivers of greenhouse gas emissions by sector from 1990 to 2018 (2021 Environ. Res. Lett. 16 073005)

This corrigendum resolves an error in figure 17 and clarifies the scope of the cement sector in figure 2. Figure 17 in the original published manuscript depicts a Kaya identity for the agriculture, forestry and other land uses (AFOLU) sector. We unintentionally excluded land-use CO 2 emissions from total greenhouse gas (GHG) emissions in this identity, and depicted only agricultural GHG emissions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Mirror dark sector solution of the Hubble tension with time-varying fine-structure constant

Here we explore a model introduced by Cyr-Racine et al. that resolves the Hubble tension by invoking a “mirror world” dark sector with energy density a fixed fraction of the “ordinary” sector of Λ+ cold dark matter. Although it reconciles cosmic microwave background and large-scale structure observations with local measurements of the Hubble constant, H 0 , the model requires a value of the primordial helium mass fraction, Y p = 0.170 ± 0.025, that is discrepant with observations and with the predictions of big bang nucleosynthesis. We consider a variant of the model with standard helium mass fraction but with the value of the electromagnetic fine-structure constant, α, slightly different during photon decoupling from its present value. If α at that epoch is lower than its current value by Δα ≃ -2 x 10 -5 , then we can achieve the same Hubble tension resolution as in the work by Cyr-Racine et al. but with consistent helium abundance. As an example of such time evolution of α, we consider a toy model of an ultralight scalar field, with mass m < 4 x 10 -29 eV, coupled to electromagnetism, which evolves after photon decoupling at redshift z ≃ 10 3 , and that with appropriate coupling appears to be consistent with late-time constraints on α variation and the weak equivalence principle.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Neutrino-dark sector equilibration and primordial element abundances

After neutrinos decouple from the photon bath, they can populate a thermal dark sector. If this neutrino cooling occurs at a temperature above ∼ 100 keV , it can impact light element abundances. We calculate the changes to the Y P and D / H abundances in this scenario with a suitably customized version of the public big bang nucleosynthesis code PRIMAT. If electron neutrinos significantly participate in the cooling, we find limits down to temperatures as low as 100 keV. And if the dark sector undergoes a “step” in N eff , there can be additional, ω b -dependent constraints. Published by the American Physical Society 2025

Giovanetti, Cara (ORCID:0000000316113379)↗
DOE OSTI2025

Geographic, sectoral, and constituent characteristics of US off‐site manufacturing wastewater disposal

This study employs recent US Environmental Protection Agency off-site manufacturing wastewater disposal data and a socioenvironmental assessment tool for the United States to understand the characteristics of such disposal in terms of geography, major contributing sectors and pollutants, and environmental impacts. Environmental impact analyses of manufacturing are insufficient without encompassing the extended physical boundary of waste management. Our analysis reveals that off-site manufacturing wastewater disposal occurs disproportionately in populations residing in census tracts already negatively impacted by environmental hazards (impacted populations, or IPs) with 44% of transfers and 55% of Risk Screening Environmental Indicators (RSEI) Hazard going to these areas, compared to their national share of 37%. Disposal hazard is concentrated in a small number of populations, with a Gini coefficient of 0.99 for RSEI Hazard. Four manufacturing sub-sectors are significant generators: Chemicals, Fabricated Metals, Primary Metals, and Transportation Equipment, with Chemicals off-site wastewater disposal largely occurring in IPs. For individual contaminants, chromium compounds and chromium represent more than 85% of the hazard but less than 10% of transfers. We explore transfer distances and waste generation and disposal hotspots, finding that the Midwest hosts a disproportionate share of off-site wastewater disposal. Further, RSEI Hazard steeply rises at shorter distances and plateaus over distances >500 miles, revealing opportunities to reduce hazard by reducing 20–500-mile transfers. Our findings strongly support targeted mitigation strategies like process substitutions, control technologies, on-site recycling and treatment, and minimizing transfer distances. This article met the requirements for a gold-gold JIE data openness badge described at http://jie.click/badges.

Fuchs, Heidi [Lawrence Berkeley National Laborator↗
DOE OSTI2026

Robotic automation of maintenance work in nuclear power plants a cross-sector survey and roadmap

Nuclear power plants face increasing cost pressures, workforce constraints (aging workforce and skilled labor shortages), and safety requirements that are accelerating interest in robotic systems for inspection and maintenance. We conducted semi-structured interviews with personnel from seven U.S. nuclear utilities and compared deployment models, operational use cases, and integration practices with those reported by participants in the oil, gas, and petrochemical sector. In nuclear plants, robotic use remains concentrated in inspection—particularly indoor unmanned aerial vehicles and submersible remotely operated vehicles—with limited application to physical maintenance tasks. Reported near-term value includes reduced radiological and industrial risk, reduced outage labor, and improved data for planning and condition assessment. Key barriers include integration and data-interoperability constraints, operator qualification requirements, cybersecurity review burden, and difficulty demonstrating reliability in plant-representative environments. Cross-sector benchmarking highlights organizational and deployment practices that may help nuclear plants scale from pilots to routine use. We propose a deployment-oriented roadmap emphasizing modular payload strategies, representative qualification pathways and testing environments, and improved data governance to support safe and economically justified expansion of robotics in operating nuclear power plants.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Lessons from the Ramond sector

We revisit the consistency of torus partition functions in (1+1)d fermionic conformal field theories, combining old ingredients of modular invariance/covariance with a modernized understanding of bosonization/fermionization dualities. Various lessons can be learned by simply examining the oft-ignored Ramond sector. For several extremal/kinky modular functions in the bootstrap literature, we can either rule out or identify the underlying theory. We also revisit the N = 1 Maloney-Witten partition function by calculating the spectrum in the Ramond sector, and further extending it to include the modular sum of seed Ramond characters. Finally, we perform the full N = 1 RNS modular bootstrap and obtain new universal results on the existence of relevant deformations preserving different amounts of supersymmetry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Utility Sector Impacts of Reduced Electricity Demand: Updates to Methodology and Results

This report presents revisions to the methodology for estimating the utility sector impacts associated with electricity demand reductions, first published in our 2014 study. The earlier report described how to calculate utility impact factors based on data from the Energy Information Agency's Annual Energy Outlook (AEO) projections of electricity supply and demand. The 2014 methodology relied on data from the AEO Reference case, and side cases implementing demand-side policies with a substantial impact on total demand. Beginning in 2015, the AEO publication schedule was revised to limit the number of side cases published with each AEO, and no suitable demand-focused side cases have been released since 2014. Hence, this paper presents a generalization of the methodology that allows a uniform approach irrespective of the nature of the side cases published with the AEO. The impact factors we calculate represent coeffcients of variation between a unit reduction to site electricity demand and corresponding supply-side changes, including reductions to electric power generation and primary fuel consumption by fuel type, emissions of criteria pollutants (Hg, NO x and SO 2 ) and greenhouse gases (CO 2 , N 2 O and CH 4 ), and total installed capacity by plant type. The impact factors are time-dependent, and also depend on the demand sector and end use. In this report, we apply the methodology to all AEO publications from 2014-2019, and all scenarios. We quantify the variation in factors across different side cases within each AEO, and across different AEO publications, and compare this to the variation due to changes in methodology.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

Dragonstone Strategy – State of Cybersecurity in the Oil & Natural Gas Sector

The oil & natural gas (ONG) system touches every corner of the nation and increased communications & control capabilities have not only allowed for greater efficiency of system operation, but have also created a massive target for adversaries to launch cyber-attacks. Like any other heavy industrial process, the ONG system relies on a complex system of information technology (IT) and operational technology (OT) devices. The current state of cyber-preparedness across the ONG industry varies from organization to organization. Among the most common challenges that ONG companies face are remote locations, longlived field assets, and lacking capabilities to find and track malware on their systems. ONG companies tend to be concerned with lack of cyber-awareness from employees, risk stemming from remote access for operations & maintenance, and software vulnerabilities within third-party equipment. Various industry and government organizations are performing research and development activities to address some of these challenges, but in many cases industry stakeholders are not aware of solutions that already exist. It is clear that a need exists for a coherent, comprehensive, multi-layered strategy for assuring the security and resilience of the nation's pipeline infrastructure against cyber threats. For a variety of reasons, the general consensus from stakeholders interviewed by LLNL is that the state of cyber-security within the electric grid is currently outpacing its ONG cousin. Existing strategies for the resilience and cyber-security of the electric grid can and should be leveraged to provide immediate benefits to the ONG system. In LLNL’s view, there are two key factors currently limiting the development of necessary cyber-practices within the ONG industry: The sheer number of differing regulatory bodies and trade groups offering both standards and best-practice recommendations for ONG cyber-security makes it difficult to create a comprehensive, directed, and coherent strategy that is applicable to all players within the ONG industry. The ONG industry is unaware of potentially useful technologies that have been developed for ensuring cyber-security of other infrastructure systems, such as the electric grid. Leveraging these technologies—and the science and engineering behind them—can provide some low-hanging fruit that can greatly improve cyber-security in the ONG industry without significant investments in terms of time and money. In the months following this report, LLNL will continue to perform outreach to key oil & gas industry stakeholders in a continual effort to identify the most pressing cyber-resilience issues in the industry. This outreach will be supplemented with LLNL’s threat intelligence capabilities to begin painting a clearer picture of the overall threat landscape faced by this sector. This assessment will be threat-informed and while the strategy itself will not be classified we will leverage intelligence analysis and adversary capabilities to identify gaps in current cybersecurity practices for oil & gas pipeline systems. Recommended efforts will be compiled into a cyber-resilience roadmap for the oil & gas pipeline sector, in which LLNL will highlight priority activities to immediately improve the state of cyber-resilience in the industry.

02 PETROLEUM↗
DOE OSTI2020

Western sector in-situ chemical oxidation project: Supplemental results after injection activities

The purpose of the Western Sector ISCO project is to inject chemical oxidants (i.e., potassium permanganate and sodium persulfate) into the eight injections wells (i.e., WSI001B, WSI001C, WSI002B, WSI002C, WSI003B, WSI003C, WSI004B, and WSI004C) and evaluate the effectiveness of the chemical oxidants at degrading indiscriminate DNAPL that is present in the subsurface. Fifteen monitoring wells (i.e., WSM001BB, WSM001B, WSM001CC, WSM001C, WSM002BB, WSM002B, WSM002CC, WSM002C, WSM003BB, WSM003B, WSM003CC, WSM003C, MSB107B, MSB107CC, and MSB107C) are currently being used by SRS to monitor the effect of the oxidant injections on the VOC plume of the Western Sector of the M-Area HWMF. Figure 1 shows the project location in reference to the M-Area Settling Basin. This is the second of three planned interim reports to track the performance of the project. The purpose of this document is to report groundwater monitoring data collected during the baseline monitoring before oxidant injections occurred and the fifteen months after oxidant injections were completed.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Load Forecasting for the Moroccan Electricity Sector

The Moroccan electricity sector is undergoing rapid transformation as it seeks to increase its utilization of renewable energy from its abundant domestic supply. Key to implementing variable renewable energy is understanding current electricity demand and forecasting this demand on the long, medium, and short timescales. This report leverages existing Moroccan electricity sector data to build basic load forecasts on these timescales. Taking these forecasts, the report recommends next steps in terms of additional algorithms, mathematical models, data collection, and scenarios (such as vehicle electrification or high levels of distributed generation) that should be examined for advanced load forecasts.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Tariff Setting in the District Heating Sector: Recommendations Based on International Experience

Ukraine’s district heating (DH) system is an essential resource for the country and has the potential to provide efficient, local, and renewable energy to a large share of the population. However, inefficient regulation and management have caused the sector to experience a vicious cycle of financial, operational, and technological problems. Overcoming these challenges and building a sustainable DH system requires comprehensive reforms, which could attract significant investment, improve the quality of services, and increase the efficiency of DH. One of the key elements of a comprehensive reform program should be a comprehensive reform of the tariff system. The purpose of this report is to provide analysis of European models for tariff regulation and recommendations for reforms to Ukraine’s DH tariff system. The report presents several case studies from European countries, followed by analysis of the current tariff system in Ukraine and barriers to effective regulation. Based on these findings, the report proposes actions Ukraine could take to improve the tariff regulatory system and promote a sustainable DH sector.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Sustainability of the U.S. Manufacturing Sector: Use of the United Nations Sustainable Development Goals

The United Nations' 17 Sustainable Development Goals (SDGs) aim to improve health and education, reduce inequality, and encourage economic growth, while also preserving or improving the conditions of our oceans and forests. Pursuing these SDGs would mean $12 trillion in economic opportunities for companies, while also improving the lives of all people and bettering the planet. Some manufacturing companies are already focusing on sustainability, but not all. In 2019, almost 30% of National Association of Manufacturers members did not have a sustainable policy, goals, or program in place. Business drivers for sustainability and the SDGs are similar, with focuses on economic growth and consumer demands. Despite the shortcomings of the SDGs, they represent an opportunity for manufacturing companies to further improve energy, material efficiency, and productivity. This report evaluates the SDGs and the manufacturing sector. The manufacturing sector was analyzed using the technology assessments (TAs) introduced in the 2015 Quadrennial Technology Review (QTR) review, which focused on concepts, challenges, and solutions to meet the United States' energy needs. Annual or sustainability reporting of companies performing work in one of those TAs were analyzed for mentions of the SDGs. The call-out boxes throughout this report provide examples of companies making progress toward the SDGs. The possible overlap between the SDGs and the Advanced Manufacturing Office (AMO) was also evaluated. The TAs in the 2015 QTR Review were furthered with detailed targets in the draft Multi-Year Program Plan (MYPP) for Fiscal Years 2017-2021. Direct and likely relationships between the SDGs and the TAs were established. Positives, challenges, SDG-related literature, and future steps are also discussed in this report.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Summary Report for the Virtual Summit on Decarbonizing the Agriculture Sector

A virtual summit on decarbonizing the agriculture sector was organized on September 21-22, 2021, by Oak Ridge National Laboratory (ORNL) in anticipation of federal activities surrounding a greater role for the US Department of Energy (DOE) in support of the US Department of Agriculture (USDA) in areas related to climate and carbon impacts on the US agriculture sector. A series of thought-provoking talks were presented by leaders from industry, academia, and DOE (see attachment—final agenda, Appendix A). About 50 to 70 scientists and engineers actively participated at any one time during the summit in the talks and in the topical breakouts (Appendix B).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Business models to assure availability of advanced superconductors for the accelerator sector and promote stewardship of superconducting magnet technology for the US economy

Stakeholders representing concerns of national and global leadership, industries that use superconducting magnets in products, manufacturers of superconducting wires and tapes that supply to industries, and innovation generators from small businesses and universities came together to address stewardship of superconducting magnet technology and assurance of supply of advanced superconductors to the accelerator sector. This report outlines potential public-private partnerships that develop and enhance domestic capabilities to meet the needs of science facilities in the accelerator systems sector and in the broader commercial ecosystem.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Biofuel Viability for the Ocean-Going Marine Sector

Marine transport contributes significantly to global carbon dioxide emissions but is one of the most difficult sectors to decarbonize because full electrification is infeasible. Renewable, low–carbon biofuels offer a potential path to decarbonization of the marine sectors but the understanding of the effects of new biofuels on engine performance and emissions is limited. In this document we report on the results of a series of studies on the techno-economic, life cycle and technical feasibility of biofuels as replacements for heavy fuel oils currently used to fuel large ocean-going vessels.

09 BIOMASS FUELS↗