Search NASA⌕ Search

SEARCH · Search NASA

Results for “selective oxidation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Interaction of Methane with Calcium Ferrite in the Chemical Looping Partial Oxidation Application: Experimental and DFT Study

In this study, experimental studies using mass spectroscopy, thermogravimetric analysis, in situ X-ray diffraction (XRD), and theoretical density functional theory calculations were carried out to investigate the mechanism of methane partial oxidation over a CaFe 2 O 4 oxygen carrier. The XRD analysis revealed the formation of the calcium ferrite phases during methane reduction occurred in the sequence CaFe 2 O 4 →CaFe 3 O 5 + Ca 2 Fe 2 O 5 →FeO + Fe + CaO→Fe + CaO. Each of these phases was modeled using periodic density functional theory to study the activity of these phases for the reactivity with CH 4 , CO, and H 2 along with the adsorbed surface species to help elucidate the effect that phase changes during reduction have on the chemical looping products CO and H 2 . Mass spectroscopic analysis revealed the formation of H 2 O and CO 2 occurred prior to the formation of CO and H 2 , and these products may be due to the removal of lattice oxygen bound in the discrete primary phase, which contributes to a small portion (~16%) of the total transferable oxygen in the solid. The density functional theory (DFT) results suggest that the gaseous CO and H 2 are not thermodynamically favorable to react with the Ca 2 Fe 2 O 5 where the release of CO and H 2 led to an increase in selectivity for these products. The DFT results suggest that some of the adsorbed atomic hydrogen combined to form adsorbed H 2 and then gaseous H 2 on the CaFe 2 O 4 surface, while the carbon deposition and some adsorbed atomic hydrogen react to form the CaFe 3 O 5 and Ca 2 Fe 2 O 5 phases simultaneously. DFT simulations suggest that both the gaseous H 2 and adsorbed atomic H are less thermodynamically favorable to drive the deep reduction of Ca 2 Fe 2 O 5 to CaO and Fe0. The deep reduction of the calcium ferrite therefore favors the generation of syngas products (CO and H 2 ) through mechanisms of methane dehydrogenation and selective oxidation of carbon to CO. The significant difference in mechanisms for partial oxidation of methane to syngas with the CaFe 2 O 4 carrier can be correlated to the differences in the oxide phases present during the reduction process, concentration of oxygen species, and bonding in the lattice structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Engineering Ultrathin Alloy Shell in Au@AuPd Core-Shell Nanoparticles for Efficient Plasmon-Driven Photocatalysis

Bimetallic core-shell nanoparticles (NPs) possessing a synergetic coupling of plasmonic and catalytic metals have emerged as promising prototypes for efficient plasmon-driven photocatalysis. Here, Au@AuPd core-shell NPs composed of Au core NP and ultrathin AuPd shell are introduced to acquire improved light utilization efficiency in photocatalytic selective oxidation. With systematical control of the composition of the ultrathin alloy shell, it reveals that the Au@AuPd core-shell NPs with 10 at% Pd (in the single-atom alloy regime) is an effective nanostructure capable of maximizing the quantum yield of plasmon-induced light absorption and optimizing the surface electronic structure for catalytic reactions. This controlled system provides new insights into shell engineering for enhancing photocatalytic performance via the regulation of energy funneling processes in core-shell nanocatalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Photoelectrochemical materials for solar energy conversion

Research and development on semiconductors for applications in solar energy conversion has witnessed rapid growth over the past several decades. With the aim of producing chemical fuels from sunlight, intense research efforts have focused on the discovery of semiconductors with crystalline structures and chemical compositions that have the potential to satisfy the complex set of required photoelectrochemical properties. This chapter focuses on the foundational structure-property relationships of selected oxide and nitride semiconductors relevant to their uses as n-/p-type photoelectrodes and as photocatalysts. Their solid-state structures and compositions are described, with a special emphasis on strategies proven effective at targeting suitable band gaps with strong visible-light absorption, efficient charge separation and diffusion of charge carriers, and optimal band edge energies for driving surface redox reactions for water splitting.

O’Donnell, Shaun↗
DOE OSTI2021

Ab-Initio Simulation Studies of Cr Solvation in Fluoride Molten Salts

Understanding molten salt chemistry is essential in ongoing research of the molten salt nuclear reactor (MSR). In this context, detailed understanding of the mechanisms underlying selective oxidation of metal species, such as Cr, is required to guide the design of effective corrosion mitigation strategies in molten salts. An important starting point for such mechanistic understanding is knowledge of the solvation structure and its role in controlling metal speciation. In this work, we use ab initio molecular dynamics simulations to study the short-range (on the scale of the nearest-neighbor bond lengths) and medium-range (over length scales of several neighbor spacings) structure in three different fluoride melts with and without Cr addition; namely, 2KF-NaF, 2LiF-BeF 2 , and 3LiF-AlF3. We find that Cr 0 ,Cr 2+ ,Cr 3+ can each be coordinated by different numbers of F-, with the variance in coordination number decreasing as oxidation state increases, and that these coordination geometries are largely independent of solvent. The manner by which Cr changes the medium-range structure, however, is found to be solvent-dependent. While 2KF-NaF melts show short and medium range order that is highly dynamic, 2LiF-BeF 2 and 3LiF-AlF 3 are characterized by molecular associates that are relatively long-lived that organize into oligomer structures on larger length scales. Rather than being solvated by F- ions alone, we find that Cr can incorporate into and be solvated within this oligomer structure. Fluoroacidity, alone, may therefore prove too simple a metric for assessing the corrosivity of molten fluorides. As our work suggests, the ability of Cr to solvate must be understood in the context of the short- and medium-range structure of the solvent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Tyrosinase-Mediated Synthesis of Nanobody–Cell Conjugates

A convenient enzymatic strategy is reported for the modification of cell surfaces. Using a tyrosinase enzyme isolated from Agaricus bisporus, unique tyrosine residues introduced at the C-termini of nanobodies can be site-selectively oxidized to reactive o-quinones. These reactive intermediates undergo rapid modification with nucleophilic thiol, amine, and imidazole residues present on cell surfaces, producing novel nanobody–cell conjugates that display targeted antigen binding. We extend this approach toward the synthesis of nanobody–NK cell conjugates for targeted immunotherapy applications. The resulting NK cell conjugates exhibit targeted cell binding and elicit targeted cell death.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Heterometallic Ce IV / V V Oxo Clusters with Adjustable Catalytic Reactivities

Heterometallic Ce IV /M oxo clusters are underexplored yet and can benefit from synergistic properties from combining cerium and other metal cations to produce efficient redox catalysts. Herein, we designed and synthesized a series of new Ce 12 V 6 oxo clusters with different capping ligands: Ce 12 V 6 -SO 4 , Ce 12 V 6 -OTs (OTs: toluenesulfonic acid), and Ce 12 V 6 -NBSA (NBSA: nitrobenzenesulfonic acid). Single crystal X-ray diffraction (SCXRD) for all three structures reveals a Ce 12 V 6 cubane core formulated [Ce 12 (VO) 6 O 24 ] 18+ with cerium on the edges of the cube, vanadyl capping the faces, and sulfate on the corners. While infrared spectroscopy (IR), ultraviolet–visible spectroscopy (UV–vis), electrospray ionization mass spectrometry (ESI-MS), and proton nuclear magnetic resonance ( 1 H NMR) proved the successful coordination of the organic ligands to the Ce 12 V 6 core, liquid phase 51 V NMR and small-angle X-ray scattering (SAXS) confirmed the integrity of the clusters in the organic solutions. Furthermore, functionalization of the Ce 12 V 6 core with organic ligands both provides increased solubility in term of homogeneous application and introduces porosity to the assemblies of Ce 12 V 6 -OTs and Ce 12 V 6 -NBSA in term of heterogeneous application, thus allowing more catalytic sites to be accessible and improving reactivity as compared to the nonporous and less soluble Ce 12 V 6 -SO 4 . Meanwhile, the coordinated ligands also influenced the electronic environment of the catalytic sites, in turn affecting the reactivity of the cluster, which we probed by the selective oxidation of 2-chloroethyl ethyl sulfide (CEES). Furthermore, this work provides a strategy to make full use of the catalytic sites within a class of inorganic sulfate capped clusters via organic ligand introduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Mechanical-Bond-Enabled Highly Efficient Charge Separation in a Light-Harvesting Hetero[2]Catenane

Photodriven charge separation is a key process for converting solar energy into chemical energy. However, it remains a challenge to develop artificial light-harvesting materials that can simultaneously achieve ultrafast charge separation and a long-lived charge-separated state with low energy loss. In contrast to conventional strategies based on covalent or noncovalent interactions, we employed a mechanical bond to forcibly assemble two strongly electron-deficient cationic chromophores (TTzBo x4+ and PDI-C 2+ ), which have very similar reduction potentials and exhibit limited noncovalent interactions, into a hetero[2]catenane (TTzPCat 6+ ). This design provides efficient π electronic couplings, enabling ultrafast charge separation (<2.3 ps) even with a low driving force (|ΔG CS | ≈ 160 meV). Furthermore, the adaptive molecular conformation of TTzPCat 6+ , in combination with the Marcus inverted region effect, successfully prolongs the charge-separated state lifetime (k CS /k CR > 1000), surpassing the conventional trade-off between driving force and charge separation efficiency in heterogeneous donor–acceptor systems. The photocatalytic system based on TTzPCat 6+ exhibits an over 2-fold enhancement in selective oxidation of aryl sulfides under mild conditions, demonstrating the potential of mechanical bonding for preparing photocatalytic materials. This investigation not only highlights a strategy for achieving highly efficient charge separation with low energy loss but also offers fresh insights into developing efficient solar energy conversion systems.

Charge transfer↗
DOE OSTI2021

Quantifying oxygen induced surface enrichment of a dilute PdAu alloy catalyst

Dilute PdAu alloys are promising catalysts for selective oxidation and hydrogenation reactions. However, the surface composition and active site density of the minority metal, Pd, is unknown. Here, we quantitatively determine a three-fold increase in the Pd site density on the surface of a dilute Pd 0.08 Au 0.92 alloy catalyst after oxygen activation by titrating the oxidized surface with quantified pulses of CO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Surface Chemistry and Reactions for Bimetallic Au Catalysis (Final Report)

Gold-based catalysts offer tremendous opportunities for developing new technologies for selective oxidation reactions that directly use gas-phase oxygen as a benign reagent and produce either no byproducts or water as the only byproduct. These processes are urgently needed and critical for achieving the sustainable production of chemicals. While recent studies demonstrate that the catalytic properties of gold can be significantly enhanced by addition of other metals, the development of these catalysts with sufficient performance for commercialization is hindered by a lack of fundamental understanding of how the catalytic properties of gold can be controlled and tailored. This project addressed this need by synergistically combining experimental and computational studies to establish fundamental composition-structure-activity relationships for gold-based catalysts for several industrially important reactions. Results from surface spectroscopy, atomic imaging and thermal desorption experiments were combined with molecular models and reaction mechanisms from quantum chemical calculations to link observable reaction rates to the structure and composition of surfaces at the molecular level. The results were used to develop improved catalyst formulations and identify optimized reaction conditions for gold-based catalysts. For broader impacts, the developed methodology was extended to other metallic catalysts, such as silver, platinum-molybdenum and nickel-tin, for improved catalytic efficiency and sustainable production of specialty and commodity chemicals.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Institute for Catalysis in Energy Processes (ICEP) (Final Report)

The Institute for Catalysis in Energy Processes (ICEP) was a multi-PI program located at the Northwestern University Center for Catalysis and Surface Science from 2006-2024. Over several renewal cycles and several organizing themes, ICEP addressed fundamental questions in catalysis science. In turn, the scientific questions addressed were directly relevant to the efficient use of the nation’s resources to produce fuels and commodity chemicals, harness alternate energy sources for chemical reactions such as light or electricity, reduce emissions and waste, and minimize the impact of our use of plastics. Selective oxidation, (oxidative) dehydrogenation, deNOx, CO 2 reduction, hydrogen release, polymer decomposition / depolymerization, and many other reactions of intense interest to the US Department of Energy were studied in the center. Major ICEP strengths were in catalyst synthesis, in measurements that elucidated catalyst properties, in reaction mechanisms and kinetics, and in predictive theory and modeling. ICEP researchers were often the inventors or developers of materials and methods that were brought to bear on the Institute’s catalytic systems. Key characterization tools advanced through this project included resonance Raman and related techniques, sum frequency generation, and X-ray standing wave spectroscopy. Center members relied extensively on computational tools such as density functional theory and microkinetic modeling to fully investigate catalyst structures and catalytic mechanisms. ICEP researchers were early developers of atomic layer deposition (ALD) for catalyst synthesis and were early pioneers of metal organic frameworks for catalysis. ICEP innovations are found in areas of intense research such as single-atom catalysts, catalytic deconstruction of plastics, and catalytic MOFs, to name a few. Research areas initiated by ICEP indirectly led to DOE EFRCs, startup companies, and other achievements. Over its 18 years of existence, ICEP involved two different PIs (Stair and Notestein) and 24 senior investigators across several academic disciplines at Northwestern University. There were tight collaborations with Argonne National Laboratory, including specialized equipment and experiments permanently located there. The center supported ~400 person-years of effort by graduate students and postdocs, either directly through DOE support or indirectly by leveraging independent support provided to the trainees, e.g. through the NSF GRFP or internal fellowships. The project resulted in 328 manuscripts and numerous conference presentations.

36 MATERIALS SCIENCE↗
NASA NTRS1979

Three methods for in situ cross-linking of polyvinyl alcohol films for application as ion-conducting membranes in potassium hydroxide electrolyte

Three methods of in situ cross-linking polyvinyl alcohol films are presented. They are: (1) acetalization with a dialdehyde such as glutaraldehyde, (2) acetalization with aldehyde groups formed by selective oxidative cleaving of the few percent of 1,2 diol units present in polyvinyl alcohol, and (3) cross-linking by hydrogen abstraction by reaction with hydrogen atoms and hydroxyl radicals from irradiated water. For the third method, improvement in film conductivity in KOH solution at the expense of mechanical strength is obtained by the presence of polyacrylic acid in the polyvinyl alcohol films. Resistivities in 45 percent KOH are given for in situ cross-linked films prepared by each of the three methods.

Philipp, W. H.↗
NASA NTRS1979

Method and device for the detection of phenol and related compounds

A method is described which permits the selective oxidation and potentiometric detection of phenol and related compounds in an electrochemical cell. An anode coated with a gel immobilized oxidative enzyme and a cathode are each placed in an electrolyte solution. The potential of the cell is measured by a potentiometer connected to the electrodes.

Schiller, J. G.↗
NASA NTRS1985

Carbon isotopes in bulk carbonaceous chondrites

The chemical and physical processes involved in the formation of the solar system are examined. Primitive matter has been found on a microscopic scale in a variety of meteorites: fragments of small solar system bodies that were never part of a large planet. This primitive matter has, in most cases, been identified by the presence of anomalous abundances of some isotopes of the chemical elements. Of particular interest for carbon isotope studies are the primitive meteorites known as carbonaceous chondrites. Using a selective oxidation technique to sort out the carbon contained in different chemical forms (graphite, carbonates, and organic matter), four carbonaceous chondrites are analyzed. The presence of the (13) C-rich component was confirmed and additional carbon components with different, but characteristic, isotopic signatures were resolved.

Halbout, J.↗
NASA NTRS1993

Stable Ni isotopes and Be-10 and Al-26 in metallic spheroids from Meteor Crater, Arizona

The Canyon Diablo spheroids, which are found around Meteor Crater, Arizona, are nickel-enriched objects with diameters from less than 0.1 to several mm. Previous studies have suggested that the enrichment of nickel resulted either from shock-melting of S-rich areas followed by solidification of the liquids under strongly non-equilibrium conditions at rapid cooling rates during flight outward from the crater or from the selective oxidation of iron. Isotopic studies are an effective tool for constraining the degree of open-system evaporation experienced by a system. The purpose of this study was to see whether Ni isotopes had been fractionated by volatilization during spheroid formation. In addition, the cosmogenic nuclides Be-10 and Al-26 were measured to try to estimate the depths in the parent meteorite from which the spheroids came.

Xue, S.↗
DOE OSTI2021

Global Gas-Phase Oxidation Rates of Select Products from the Fast Pyrolysis of Lignocellulose

The oxidation kinetics for products of fast pyrolysis at low temperatures (<600°C) are not well known. These will be important in effort to model autothermal pyrolysis, which has been recently developed to intensify the process, but which occurs at much lower temperatures than combustion. Furthermore, this study determines global oxidation rates at 400-600°C for three important products of fast pyrolysis: levoglucosan, xylose, and acetic acid. Experiments were performed in a fluidized bed pyrolyzer with the reactor modeled as a series of CSTRs and PFRs to determine reaction rates. Oxidation rates at 500°C for the three model compounds varied by a factor of ten.

09 BIOMASS FUELS↗
DOE OSTI2023

Mechanistic Insights on Permeation of Water over Iron Cations in Nanoporous Silicon Oxide Films for Selective H 2 and O 2 Evolution

Electrocatalysts encapsulated by an ultrathin and semipermeable oxide layer offer a promising avenue for efficient, selective, and cost-effective production of hydrogen through photoelectrochemical water splitting. This architecture is especially attractive for Z-scheme water splitting, for which a nanoporous oxide film can be leveraged to mitigate undesired, yet kinetically facile, reactions involving redox shuttles, such as aqueous iron cations, by limiting transport of these species to catalytically active sites. In this work, molecular dynamics simulations were combined with electrochemical measurements to provide a mechanistic understanding of permeation of water and Fe(III)/Fe(II) redox shuttles through nanoporous SiO 2 films. It is shown that even for SiO 2 pores with a width as small as 0.8 nm, water does not experience any energy barrier for permeating into the pores due to a favorable interaction with hydrophilic silanol groups on the oxide surface. In contrast, permeation of Fe(III) and Fe(II) into microporous SiO 2 pores is limited due to high energy barriers, which stem from a combination of distortion and dehydration of the second and third ion solvation shells. Furthermore, our simulations and experimental results show that SiO 2 coatings can effectively mitigate undesired Fe(III)/Fe(II) redox reactions at underlying electrodes by attenuating permeation of iron cations, while allowing water to permeate and thus participate in water splitting reactions. In a broader context, our study demonstrates that selectivity of solvated cations can be manipulated by controlling the pore size and surface chemistry of oxide films.

14 SOLAR ENERGY↗
NASA NTRS1973

Oxidation resistance of selected mechanical carbons at 650 deg C in dry flowing air

Oxidation experiments were conducted with several experimental mechanical carbons at 650 C in air flowing at 28 cu cm/sec (STP). Experiments indicate that boron carbide addition and zinc phosphate treatment definitely improved oxidation resistance. Impregnation with coal tar pitch before final graphitization had some beneficial effect on oxidation resistance and it markedly improved flexure strength and hardness. Graphitization temperature alone did not affect oxidation resistance, but with enough added boron carbide the oxidation resistance was increased although the hardness greatly decreased.

Allen, G. P.↗