SEARCH · Search NASA

Results for “shaped boom”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

NASA NTRSDate not supplied

A Solar Sail Shape Modeling Approach for Attitude Control Design and Analysis

Solar sails operating in the space environment experience deformations in sail shape that result in relatively large disturbance torques which dictate the required performance of the spacecraft attitude control and momentum management systems. These deformations are driven by thermal loads on the booms (due to uneven solar heating), manufacturing and assembly tolerances, and variations in membrane tension. The Solar Cruiser spacecraft utilizes a four-quadrant sail design with four 30-meter length booms and four triangular sail membranes, creating a square sail structure of >1600 m2. Medium-fidelity mesh models were developed based on a characteristic deformed shape. A series of parametric studies were conducted using this shape paradigm to determine worst-case deformed sail shapes which produce bounding disturbance torques. A large database of shapes was produced, and the forces and moments induced by each individual shape were calculated using a Rios-Reyes reduced order generalized sail model. Two were selected as reference worst-case shapes for the Solar Cruiser mission: one which produced the highest pitch/yaw root-sum-squared (RSS) torque, and one which produced the highest roll torque. The results showed that the worst-case shapes at high solar incidence angles induce significantly higher (2-10x) disturbance torques than an ideal, flat-plate sail. Even with considerable safety margins, assuming an ideal sail is unlikely to sufficiently bound the disturbances, which is critical when designing the attitude control system and sizing actuators. Accurate sail shape modeling methodologies should therefore be employed on future solar sail missions.

Solar Sail↗

NASA NTRSDate not supplied

A Solar Sail Shape Modeling Approach for Attitude Control Design and Analysis

Solar sails operating in the space environment experience deformations in sail shape that result in relatively large disturbance torques which dictate the required performance of the spacecraft attitude control and momentum management systems. These deformations are driven by thermal loads on the booms (due to uneven solar heating), manufacturing and assembly tolerances, and variations in membrane tension. The Solar Cruiser spacecraft utilizes a four-quadrant sail design with four 30-meter length booms and four triangular sail membranes, creating a square sail structure of >1600 m2. Medium-fidelity mesh models were developed based on a characteristic deformed shape. A series of parametric studies were conducted using this shape paradigm to determine worst-case deformed sail shapes which produce bounding disturbance torques. A large database of shapes was produced, and the forces and moments induced by each individual shape were calculated using a Rios-Reyes reduced order generalized sail model [1]. Two were selected as reference worst-case shapes for the Solar Cruiser mission: one which produced the highest pitch/yaw root-sum-squared (RSS) torque, and one which produced the highest roll torque. The results showed that the worst-case shapes at high solar incidence angles induce significantly higher (2-10x) disturbance torques than an ideal, flat-plate sail. Even with considerable safety margins, assuming an ideal sail is unlikely to sufficiently bound the disturbances, which is critical when designing the attitude control system and sizing actuators. Accurate sail shape modeling methodologies should therefore be employed on future solar sail missions. References [1] L. Rios-Reyes and D. J. Scheeres, “Generalized Model for Solar Sails,” Journal of Spacecraft and Rockets, Vol. 42, Jan. 2005, pp. 182–185, 10.2514/1.9054.

Solar Sail↗

NASA NTRS2009

Integration of Engine, Plume, and CFD Analyses in Conceptual Design of Low-Boom Supersonic Aircraft

This paper documents an integration of engine, plume, and computational fluid dynamics (CFD) analyses in the conceptual design of low-boom supersonic aircraft, using a variable fidelity approach. In particular, the Numerical Propulsion Simulation System (NPSS) is used for propulsion system cycle analysis and nacelle outer mold line definition, and a low-fidelity plume model is developed for plume shape prediction based on NPSS engine data and nacelle geometry. This model provides a capability for the conceptual design of low-boom supersonic aircraft that accounts for plume effects. Then a newly developed process for automated CFD analysis is presented for CFD-based plume and boom analyses of the conceptual geometry. Five test cases are used to demonstrate the integrated engine, plume, and CFD analysis process based on a variable fidelity approach, as well as the feasibility of the automated CFD plume and boom analysis capability.

Li, Wu↗

NASA NTRS2018

Bistable Collapsible Tubular Mast Booms

A promising candidate for deployable composite structures is the two-shelled Collapsible Tubular Mast (CTM) boom, which is to be employed on future solar sail and interplanetary small satellite platforms by the National Aeronautics and Space Administration (NASA). This is due to its two omega-shaped shells forming a closed-section which yields large stiffnesses that allowed for high dimensional stability. An inextensional analytical model describing the bending deformation mechanics of CTM booms was used to determine how design variables induce bistability, or the existence of two strain energy wells. Bistable booms were favorable due to low strain energy requirements for the coiled state and had more controllable deployment when compared to monostable booms. The effects of varying lamina material, laminate layup, and shell arc geometries between different inner and outer shell segments on the second strain energy well and stiffness properties were determined for cross-sections formed by circular segments. The full design space for two-shelled composite CTM booms was explored to evaluate the validity of the simple analytical model developed. Optimal CTM boom designs were manufactured and experimentally characterized for comparisons against model results. The model under-predicted the second stable coiled diameter of the complete two-shelled booms by 27-33% and as low as 3-8% for the individual shells wrapped alone.

Fernandez, Juan M.↗

NASA NTRS1971

The vibration of a box-type structure. II - Response to a travelling pressure wave.

A finite element method is formulated for determining the transient response of a box-type structure to a traveling, arbitrarily shaped pressure wave. The method is illustrated by considering an example of practical concern - the sonic boom. The acceleration-time histories of a closed box are compared with those obtained experimentally from a simulated boom. Satisfactory agreement is obtained with only four rectangular elements per individual face and a simplified loading of the box.

Popplewell, N.↗

NASA NTRS1979

Effects of fuselage forebody geometry on low-speed lateral-directional characteristics of twin-tail fighter model at high angles of attack

Low-speed, static wind-tunnel tests were conducted to explore the effects of fighter fuselage forebody geometry on lateral-directional characteristics at high angles of attack and to provide data for general design procedures. Effects of eight different forebody configurations and several add-on devices (e.g., nose strakes, boundary-layer trip wires, and nose booms) were investigated. Tests showed that forebody design features such as fineness ratio, cross-sectional shape, and add-on devices can have a significant influence on both lateral-directional and longitudinal aerodynamic stability. Several of the forebodies produced both lateral-directional symmetry and strong favorable changes in lateral-directional stability. However, the same results also indicated that such forebody designs can produce significant reductions in longitudinal stability near maximum lift and can significantly change the influence of other configuration variables. The addition of devices to highly tailored forebody designs also can significantly degrade the stability improvements provided by the clean forebody.

Carr, P. C.↗

NASA NTRSDate not supplied

NASA’s Quesst Community Survey Campaign with the X-59 Aircraft

In its mission to expand knowledge and improve aviation, NASA conducts research to address sonic boom noise, the prime barrier to overland supersonic flight. For half a century, civilian aircraft have been required to fly slower than the speed of sound when over land to prevent sonic boom disturbances to communities under the flight path. However, lower noise levels may be achieved via new aircraft shaping techniques that reduce the merging of shockwaves generated during supersonic flight. As part of its Quesst mission, NASA is building a piloted, research aircraft called the X-59 to demonstrate low noise supersonic flight. After initial flight testing to ensure the aircraft performs as designed, NASA will begin a national campaign of supersonic flights over communities to collect data on how people perceive the sounds from this new design. The data collected will support the efforts of national and international noise regulators to develop new standards that would allow supersonic flight over land at low noise levels. This presentation summarizes the NASA Quesst community survey campaign.

supersonic flight↗

NASA NTRSDate not supplied

NASA’s Quesst Community Survey Campaign with the X-59 Aircraft

sonic boom↗

NASA NTRSDate not supplied

Scope and Goals of NASA's Quesst Community Test Campaign with the X-59 Aircraft

In its mission to expand knowledge and improve aviation, NASA conducts research to address sonic boom noise, the prime barrier to overland supersonic flight. For half a century, civilian aircraft have been required to fly slower than the speed of sound when over land to prevent sonic boom disturbances to communities under the flight path. However, lower noise levels may be achieved via new aircraft shaping techniques that reduce the merging of shockwaves generated during supersonic flight. As part of its Quesst mission, NASA is building a piloted, experimental aircraft called the X-59 to demonstrate low noise supersonic flight. After initial flight testing to ensure the aircraft performs as designed, NASA will begin a national campaign of supersonic flights over communities to collect data on how people perceive the sounds from this new design. The data collected will support the efforts of national and international noise regulators to develop new standards that would allow supersonic flight over land at low noise levels. This paper provides an update on the planned experimental scope and key goals of the community test campaign.

sonic boom↗

NASA NTRSDate not supplied

Scope and Goals of the NASA Quesst Community Test Campaign With the X-59 Aircraft

In its mission to expand knowledge and improve aviation, NASA conducts research to address sonic boom noise, the prime barrier to overland supersonic flight. For half a century, civilian aircraft have been required to fly slower than the speed of sound when over land to prevent sonic boom disturbances to communities under the flight path. However, lower noise levels may be achieved via new aircraft shaping techniques that reduce the merging of shockwaves generated during supersonic flight. As part of its Quesst mission, NASA is building a piloted, experimental aircraft called the X-59 to demonstrate low noise supersonic flight. After initial flight testing to ensure the aircraft performs as designed, NASA will begin a national campaign of supersonic flights over communities to collect data on how people perceive the sounds from this new design. The data collected will support the efforts of national and international noise regulators to develop new standards that would allow supersonic flight over land at low noise levels. This paper provides an update on the planned experimental scope and key goals of the community test campaign.

sonic boom↗

NASA NTRS1972

New design goals and a new shape for the SST.

Considerations are given to demonstrate that a wing which pivots as a whole would permit supersonic aircraft which avoid sonic boom and reduce noise around airports. Several such wing designs are discussed. Wind-tunnel tests results are given to support the soundness of this wing design.

Jones, R. T.↗

NASA NTRS1971

Non-asymptotic effects in the approach to the far field sonic boom.

An extension is described for the Whitham theory (1952, 1954) which indicates small deviations from the ultimate N-wave for bodies with a continuous or discontinuous tangent. Some simple formulas are derived which yield a good reduction in the sonic boom intensity. The theory is elucidated by some numerical examples for a class of simple theoretically relevant shapes.

Henderson, L. F.↗

NASA NTRS2016

Thermal Deformation of Very Slender Triangular Rollable and Collapsible Booms

Metallic triangular rollable and collapsible (TRAC) booms have deployed two Cubesat-based solar sails in low Earth orbit, making TRAC booms the most popular solar sail deployment method in practice. This paper presents some concerns and solutions surrounding the behavior of these booms in the space thermal environment. A 3.5-cm-tall, 4-meter-long TRAC boom of Elgiloy cobalt alloy, when exposed to direct sunlight in a 1 AU deep space environment, has a predicted tip motion of as much as 0.5 meters. Such large thermal deflections could generate unacceptable distortions in the shape of a supported solar sail, making attitude control of the solar sail spacecraft difficult or impossible. As a possible means of mitigating this issue, the thermal distortion behaviors of three alternative material TRAC booms are investigated and compared with the uncoated Elgiloy baseline boom. A tenfold decrease in induced curvature is shown to be possible relative to the baseline boom. Potential thermal distortions of the LightSail-A solar sail TRAC booms are also examined and compared, although inconclusively, with available on-orbit camera imagery.

Stohlman, Olive R.↗

NASA NTRS1988

Aerodynamic technology opportunities for a high-speed civil transport

A NASA-sponsored study has undertaken the definition of SST and HST configurations resulting in substantial reductions relative to current technology in takeoff gross weight, sonic boom overpressures, and airport-vicinity propulsion and aerodynamic noise. CFD methods have been applied to vehicle-shaping and laminar boundary layer flow area-maximizing configurational studies. Various planforms and active boundary-layer control methods are considered. Computer-managed wing control surface deflections are identified as substantial contributors to wing aerodynamic load and structural weight reduction, while correcting undesirable aerodynamic-pitching characteristics.

Welge, H. Robert↗

NASA NTRSDate not supplied

An Overview of the NASA Quesst Community Test Campaign with the X-59 Aircraft

In its mission to expand knowledge and improve aviation, NASA conducts research to address sonic boom noise, the prime barrier to overland supersonic flight. For half a century civilian aircraft have been required to fly slower than the speed of sound when over land to prevent sonic boom disturbances to communities under the flight path. However, lower noise levels may be achieved via new aircraft shaping techniques that reduce the merging of shockwaves generated during supersonic flight. As part of its Quesst mission, NASA is building a piloted, experimental aircraft called the X-59 to demonstrate low noise supersonic flight. After initial flight testing to ensure the aircraft performs as designed, NASA will begin a national campaign of community overflight tests to collect data on how people perceive the sounds from this new design. The data collected will support national and international noise regulators’ efforts as they consider new standards that would allow supersonic flight over land at low noise levels. This presentation provides an overview of the community test campaign, including the scope, key objectives, stakeholders, and challenges.

Jonathan Rathsam↗

NASA NTRS2014

Conceptual Design of Low-Boom Aircraft with Flight Trim Requirement

A new low-boom target generation approach is presented which allows the introduction of a trim requirement during the early conceptual design of supersonic aircraft. The formulation provides an approximation of the center of pressure for a presumed aircraft configuration with a reversed equivalent area matching a low-boom equivalent area target. The center of pressure is approximated from a surrogate lift distribution that is based on the lift component of the classical equivalent area. The assumptions of the formulation are verified to be sufficiently accurate for a supersonic aircraft of high fineness ratio through three case studies. The first two quantify and verify the accuracy and the sensitivity of the surrogate center of pressure corresponding to shape deformation of lifting components. The third verification case shows the capability of the approach to achieve a trim state while maintaining the low-boom characteristics of a previously untrimmed configuration. Finally, the new low-boom target generation approach is demonstrated through the early conceptual design of a demonstrator concept that is low-boom feasible, trimmed, and stable in cruise.

Ordaz, Irian↗

NASA NTRS1985

F-8 refueling boom ground vibration test

A ground vibration test was conducted on a simulated refueling boom mounted on an F-8 airplane. The ground vibration test was conducted to determine if the refueling boom modal frequencies were close to the airplane frequencies. The data presented in this report include modal frequencies, mode shape data, and structural damping coefficients.

Kahoe, M. W.↗

NASA NTRS1992

A numerical model for sonic boom propagation through an inhomogeneous, windy atmosphere

The ZEPHYRUS computer model calculates sonic boom distortion during propagation through the atmosphere. The model includes the effects of nonlinear distortion, attenuation, dispersion, and wind. Trial runs with the model indicate that, in general, stable shocks have not formed when the sonic boom reaches the ground. Also, the rise time of the lead shock may strongly depend on the overall waveform shape, and may be significantly increased by purely dispersive effects when matching occurs between the rise time and the characteristic oxygen molecular relaxation time.

Robinson, Leick D.↗