Search NASA⌕ Search

SEARCH · Search NASA

Results for “shear layer turbulence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Turbulence measurements in a compressible reattaching shear layer

Detailed hot-wire measurements of the longitudinal component of the mass-flow fluctuations have been made in an approximately self-preserving free shear layer reattaching on a 20 degree ramp at Mach number of 2.9. The experimental configuration is especially designed to provide a well-defined initial condition for the reattachment process. The absolute mass-flow turbulence intensity increases dramatically through the compression in the reattachment region, which is in sharp contrast to similar subsonic reattachments. It is clear that the mean dilatation contributes significantly to the turbulence amplification. In addition, the length scale is affected strongly by the presence of extra strain rates. Prediction of this flow will require some sophisticated modelling, and the challenge to the predictor is clear.

Hayakawa, K.↗
NASA NTRS1980

Interaction between a normal shock wave and a turbulent boundary layer at high transonic speeds. II - Wall shear stress

Asymptotic methods are used to calculate the shear stress at the wall for the interaction between a normal shock wave and a turbulent boundary layer on a flat plate. A mixing length model is used for the eddy viscosity. The shock wave is taken to be strong enough that the sonic line is deep in the boundary layer and the upstream influence is thus very small. It is shown that unlike the result found for laminar flow an asymptotic criterion for separation is not found; however, conditions for incipient separation are computed numerically using the derived solution for the shear stress at the wall. Results are compared with available experimental measurements.

Liou, M. S.↗
NASA NTRS1987

The simulation of coherent structures in a laminar boundary layer

Coherent structures in turbulent shear flows were studied extensively by several techniques, including the VITA technique which selects rapidly accelerating or decelerating regions in the flow. The evolution of a localized disturbance in a laminar boundary layer shows strong similarity to the evolution of coherent structures in a turbulent-wall bounded flow. Starting from a liftup-sweep motion, a strong shear layer develops which shares many of the features seen in conditionally-sampled turbulent velocity fields. The structure of the shear layer, Reynolds stress distribution, and wall pressure footprint are qualitatively the same, indicating that the dynamics responsible for the structure's evolution are simple mechanisms dependent only on the presence of a high mean shear and a wall and independent of the effects of local random fluctuations and outer flow effects. As the disturbance progressed, the development of streak-like-high- and low-speed regions associated with the three-dimensionality.

Breuer, Kenny↗
NASA NTRS1973

A model of wind shear and turbulence in the surface boundary layer

A model of wind and turbulence has been described for the surface boundary layer. The wind structure in the surface layer is considered to be a function of the surface parameters, stability, and height. The surface parameters considered are: (1) the surface roughness length; (2) the surface friction velocity; and (3) the zero plane displacement height. The stability parameter, Z/L, where L is the Monin-Obukov stability length, describes the thermal effect on the wind profile. The logarithmic wind profile is used to describe the mean wind field in the neutral boundary layer, and a logarithmic profile with a stability defect is used to describe the stable and unstable atmospheric conditions. For the very stable conditions, the logarithmic wind law does not hold. Under this condition, the layers of the atmosphere become disconnected and large scale frontal motions are the predominate factor in defining the wind profile. Figures are presented which represent some typical wind profiles in the very stable condition.

Luers, J. K.↗
NASA NTRS1986

Turbulent solutions of the Navier-Stokes equations

Analytical and numerical approaches to the mechanics of turbulent flow are examined in a general introduction and illustrated with graphs. Topics discussed include the averaged and unaveraged basic equations, numerical solutions and methods, homogeneous fluctuations and turbulence with no mean flow, uniformly sheared fluctuations and turbulence, inhomogeneous fluctuations and turbulence in a developing shear layer, and steady-state homogeneous turbulence with a spatially periodic body force.

Deissler, R. G.↗
NASA NTRS1990

A linear shock cell model for non-circular jets using conformal mapping with a pseudo-spectral hybrid scheme

The shock structure in non-circular supersonic jets is predicted using a linear model. This model includes the effects of the finite thickness of the mixing layer and the turbulence in the jet shear layer. A numerical solution is obtained using a conformal mapping grid generation scheme with a hybrid pseudo-spectral discretization method. The uniform pressure perturbation at the jet exit is approximated by a Fourier-Mathieu series. The pressure at downstream locations is obtained from an eigenfunction expansion that is matched to the pressure perturbation at the jet exit. Results are presented for a circular jet and for an elliptic jet of aspect ratio 2.0. Comparisons are made with experimental data.

Bhat, Thonse R. S.↗
NASA NTRS1973

The turbulence structure in the plane two-stream mixing layer.

Experimental data on the turbulent structure of free shear layers is examined in incompressible air streams. Both single-point and two-point data are used to examine the large coherent structure of the mixing layer. The use of spatial scales to define this large structure is explored. Application of these scales to modeling of free shear layers to show the similarity of such flows is demonstrated. Comparison of the statistical structure with observations from shadowgraph displays of plane shear layer flows shows good qualitative and quantitative agreement.

Jones, B. G.↗
DOE OSTI2020

Experimental investigation of turbulent wake flows in a helically wrapped rod bundle in presence of localized blockages

In nuclear sodium fast reactors, bundles of rods are tightly packed into a triangular lattice, enclosed in a hexagonal duct, and each pin is spirally wrapped with a thin wire. Flow blockages can potentially impact the local flow characteristics and heat transfer mechanisms in the bundle due to its small subchannel size. The effects of the blockage on the flow structures and heat transfer mechanisms are important aspects that require an accurate investigation. In this study, the flow-field characteristics in the vicinity of a blockage located in the exterior subchannel of rod bundles with helically wrapped wires were experimentally investigated. The velocity fields in the exterior subchannel were acquired by applying matched-index-of-refraction and time-resolved particle image velocimetry (TR-PIV) techniques for Reynolds numbers of Re 1 = 4000 and Re 2 = 17 000, i.e., equivalent to Rew 1 = 19 600 and Rew 2 = 83 200, respectively, based on the blockage width. The results from the TR-PIV measurements revealed an arch-shaped vortex with a large flow recirculation and a pair of counter-rotating vortices in the wake region downstream of the blockage, which is commonly observed in the wake flow of bluff bodies. The relative lateral distance and angle between the two vortices decreased when the Reynolds numbers increased. Profiles of maximum turbulence intensity along the shear layers illustrated the transition process including the growth, peak, and decay along the flow direction. From the spectral analysis of the turbulent velocities extracted at points along the shear layer, the Strouhal numbers ( St ) representing the vortex shedding frequency were found to be St = 0.25 and St = 0.56 for the left and right shear layers, respectively. Characteristics of shear layers generated by the blockage in the exterior subchannel were investigated via the two-point cross correlation of fluctuating velocities. The patiotemporal cross correlations of turbulent velocities, computed at points in the region where the left shear layer exhibited rolling effects and vortex breakdowns, were considerably wider and longer. The convection velocity U c was estimated to be ~0.82 U m to 0.93 U m . Proper orthogonal decomposition (POD) analysis was applied to the instantaneous velocity fields to extract the statistically dominant flow structures. It was found that POD modes 2–3 and 4–5 formed the pair modes when the corresponding POD temporal coefficients depicted sinusoidal shapes and exhibited nearly circular orbits in the phase space. Spectral analysis of the POD temporal coefficients confirmed the vortex shedding frequencies detected in the analysis of turbulent velocities.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1976

Diffusivity in turbulent fluid containing two dominant scales, and compressible shear layer according to a kinetic theory

The solution of the two nonequilibrium-degree kinetic equation was first determined for the effective length scale and turbulence energy for a spatially homogeneous turbulence field with two characteristic length scales, where the source for one family of eddies exists. This solution was applied to the evaluation of the eddy diffusivity in the combustion chamber of an internal combustion engine. The result was compared with another existing solution. This was carried out to demonstrate the feasibility of obtaining an effective length-scale equation within the context of the kinetic theory. A formulation and partial solution of the compressible plane shear layer are also presented.

Chung, P. M.↗
NASA NTRS1982

Second order closure for variable density free shear layer

A full second order closure turbulence model for the prediction of free shear flows with variable density is developed. The importance of density fluctuations due to inhomogeneities in fluid composition is emphasized. Some simplicity is achieved by using density weighted averaging to account implicitly for density fluctuation effects. Transport equations for various second order correlations - such as Reynolds stress, turbulent mass fluxes or density velocity correlations - are derived, modelled and solved, together with the mean equations for momentum and species conservation. Solutions of these equations are compared with the two different sets of experimental data for low speed free mixing layers (helium into nitrogen and freon 12 into air).

Vandromme, D.↗
NASA NTRS1987

Control of free shear layers

The fundamental aspects of controlled multiple coherent mode presence in turbulent shear flows is first discussed, including the supplementary averaging procedures in addition to the Reynolds average and the nonlinear energy transfer mechanisms coupling the coherent modes, mean flow and fine-grained turbulence. Then the problem of a fundamental mode and its subharmonic in a developing mixing layer, the prototype problem of subharmonic cascade, is examined. An integral method is presented which allows the determination of the coherent wave envelope or amplitude simultaneously with the mean flow growth rate and turbulence energy. This is then generalized to the presence of multiple subharmonics using a binary-frequency interaction argument. Free shear layer control is discussed in terms of initial coherent mode amplitudes, dimensionless initial frequencies, phase angle between the modes and fine-grained turbulence levels, in particular, how these parameters could enhance or suppress the shear layer spreading rate and the levels of fine-grained turbulence.

Liu, J. T. C.↗
DOE OSTI2021

Enhanced particle transport events approaching the density limit of the J-TEXT tokamak

Enhanced particle transport events are discovered and analyzed as the density limit of the J-TEXT tokamak is approached. Edge shear layer collapse is observed and the ratio of Reynolds power to turbulence production decreases. Simultaneously, the divergence of turbulence internal energy flux (i.e. turbulence spreading) increases, indicating that shear layer collapse triggers an outward spreading event. Studies of correlations show that the enhanced particle transport events are quasi-coherent, and manifested primarily in density fluctuations which exhibit positive skewness. Furthermore, electron adiabaticity emerges as the critical parameter which signals transport event onset. For α < 0.35 as density approaches the Greenwald density, both turbulence spreading and density fluctuations rise rapidly. Taken together, these results elucidate the connections between edge shear layer, density fluctuations, particle transport events, turbulence spreading and plasma edge cooling as the density limit is approached.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1993

Application of a Reynolds stress model to separating boundary layers

Separating turbulent boundary layers occur in many practical engineering applications. Nonetheless, the physics of separation/reattachment of flows is poorly understood. During the past decade, various turbulence models were proposed and their ability to successfully predict some types of flows was shown. However. prediction of separating/reattaching flows is still a formidable task for model developers. The present study is concerned with the process of separation from a smooth surface. Features of turbulent separating boundary layers that are relevant to modeling include the following: the occurrence of zero wall shear stress, which causes breakdown of the boundary layer approximation; the law of the wall not being satisfied in the mean back flow region; high turbulence levels in the separated region; a significant low-frequency motion in the separation bubble; and the turbulence structure of the separated shear layer being quite different from that of either the mixing layers or the boundary layers. These special characteristics of separating boundary layers make it difficult for simple turbulence models to correctly predict their behavior.

Ko, Sung HO↗
NASA NTRS2007

Boundary Layer Transition on an Axial Compressor Stator Blade-Wake Passing and Freestream Turbulence Effects

Quantitative observations of transitional boundary layers in regions of strong flow deceleration on an axial compressor stator blade are reported. Measurements are obtained at a fixed chordwise position, and the blade incidence was varied by changing the compressor throughflow so as to move the transition region relative to the stationary probe. It was thus possible to observe typical boundary layer behavior at various stages of transition in the turbomachine environment. The range of observations covers separating laminar flow at transition onset, and reattachment of intermittently turbulent periodically separated shear layers.

Walker, G. J.↗
DOE OSTI2025

Oceanic mixing and waves in the presence of a suspended canopy

Large-eddy simulations are analysed to determine the influence of suspended canopies, such as those formed in macroalgal farms, on ocean mixed layer (OML) deepening and internal wave generation. In the absence of a canopy, we show that Langmuir turbulence, when compared with wind-driven shear turbulence, results in a deeper OML and more pronounced internal waves beneath the OML. Subsequently, we examine simulations with suspended canopies of varying densities located in the OML, in the presence of a background geostrophic current. Intensified turbulence occurs in the shear layer at the canopy’s bottom edge, arising from the interaction between the geostrophic current and canopy drag. Structures resembling Kelvin–Helmholtz (KH) instability emerge as the canopy shear layer interacts with the underlying stratification, radiating internal waves beneath the OML. Both intensified turbulence and lower-frequency motions associated with KH-type structures are critical factors in enhancing mixing. Consequently, the OML depth increases by up to a factor of two compared with cases without a canopy. Denser canopies and stronger geostrophic currents lead to more pronounced KH-type structures and internal waves, stronger turbulence and greater OML deepening. Additionally, vertical nutrient transport is enhanced as the OML deepens due to the presence of the canopy. Considering that the canopy density investigated in this study closely represents offshore macroalgal farms, these findings suggest a mechanism for passive nutrient entrainment conducive to sustainable farming. Overall, this study reveals the intricate interactions between the suspended canopy, turbulent mixing and stratification, underscoring their importance in reshaping OML characteristics.

Bo, Tong (ORCID:0000000260300561)↗