Search NASA⌕ Search

SEARCH · Search NASA

Results for “shock simulation test”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

The Impact of the 8–10 March 2012 Geomagnetic Storm on Inner Zone Protons as Measured by Van Allen Probes

The Relativistic Electron Proton Telescope (REPT) instrument on the Van Allen Probes observed a double-peaked inner zone proton population throughout the 7 year lifetime of the mission. M. Hudson et al. (2023) showed that a strong SEP event accompanied by a CME-shock in early March 2012 provided the Solar Energetic Proton (SEP) source for the higher L trapped proton population, which then diffused radially inward to be observed by REPT at L = 2. The study followed trajectories of SEP protons launched isotropically from a sphere at 7 Re for 2.5 hr in fields calculated by the LFM-RCM global MHD model, which includes electric fields needed to model the transport and trapping of the protons by the shock, and then a radial diffusion simulation was run for 2 years using the result from the test-particle simulation as the initial condition. The simulation result was compared with REPT measurement in November 2013 and showed reasonable agreement. However, the simulation overestimated the Phase Space Density by a factor of four due to lack of field line curvature scattering during the storm in the model. In this study, a test-particle simulation is performed for 2 days following the injection and trapping of protons in March 2012 using TS05 fields to simulate the field line curvature scattering of the trapped SEP due to the buildup of the ring current during the geomagnetic storm. The resulting sample distribution was then weighted using the flux at the end of the two-hour MHD-test particle simulation. A radial diffusion simulation is then run using the initial profile that included the loss effect, with improved comparison with REPT measurements after 2 years.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1976

Hot interstellar tunnels. 1: Simulation of interacting supernova remnants

The theory required to build a numerical simulation of interacting supernova remnants is developed. The hot cavities within a population of remnants will become connected, with varying ease and speed, for a variety of assumed conditions in the outer shells of old remnants. Apparently neither radiative cooling nor thermal conduction in a large-scale galactic magnetic field can destroy hot cavity regions, if they grow, faster than they are reheated by supernova shock waves, but interstellar mass motions disrupt the contiguity of extensive cavities necessary for the dispersal of these shocks over a wide volume. Monte Carlo simulations show that a quasi-equilibrium is reached in the test space within 10 million yrs of the first supernova and is characterized by an average cavity filling fraction of the interstellar volume. Aspects of this equilibrium are discussed for a range of supernova rates. Two predictions are not confirmed within this range: critical growth of hot regions to encompass the entire medium, and the efficient quenching of a remnant's expansion by interaction with other cavities.

Smith, B. W.↗
NASA NTRS1988

Numerical analysis of pulse facility transient flow through a supersonic combustion model

The supersonic high enthalpy flow from a shock tunnel facility flowing through a two-dimensional duct simulating a combustor has been computed for two test conditions for both steady and transient inflow. The nominal test conditions had stagnation enthalpies of 4.3 and 12.1 MJ/kg, with corresponding flight Mach numbers of 9 and 16, respectively. A full Navier-Stokes code (SPARK) was used to compute the flow development and the mixing of a hydrogen jet injected from the base of a central strut. Results of the calculations are presented and compared with wall pressure data. Additional comparisons of the transient and steady inflow results are presented to assess the effect of transient flow on the data. This paper presents a status of the progress in applying CFD codes to analyze the transient flow from a pulse facility.

Rogers, R. Clayton↗
NASA NTRS1993

Thermal coatings for titanium-aluminum alloys

Titanium aluminides and titanium alloys are candidate materials for use in hot structure and heat-shield components of hypersonic vehicles because of their good strength-to-weight characteristics at elevated temperature. However, in order to utilize their maximum temperature capability, they must be coated to resist oxidation and to have a high total remittance. Also, surface catalysis for recombination of dissociated species in the aerodynamic boundary layer must be minimized. Very thin chemical vapor deposition (CVD) coatings are attractive candidates for this application because of durability and very light weight. To demonstrate this concept, coatings of boron-silicon and aluminum-boron-silicon compositions were applied to the titanium-aluminides alpha2 (Ti-14Al-21Nb), super-alpha2 (Ti-14Al-23-Nb-2V), and gamma (Ti-33Al-6Nb-1Ta) and to the titanium alloy beta-21S (Ti-15Mo-3Al-3Nb-0.2Si). Coated specimens of each alloy were subjected to a set of simulated hypersonic vehicle environmental tests to determine their properties of oxidation resistance, surface catalysis, radiative emittance, and thermal shock resistance. Surface catalysis results should be viewed as relative performance only of the several coating-alloy combinations tested under the specific environmental conditions of the LaRC Hypersonic Materials Environmental Test System (HYMETS) arc-plasma-heated hypersonic wind tunnel. Tests were also conducted to evaluate the hydrogen transport properties of the coatings and any effects of the coating processing itself on fatigue life of the base alloys. Results are presented for three types of coatings, which are as follows: (1) a single layer boron silicon coating, (2) a single layer aluminum-boron-silicon coating, and (3) a multilayer coating consisting of an aluminum-boron-silicon sublayer with a boron-silicon outer layer.

Cunnington, George R.↗
NASA NTRS2016

Coronal Magnetic Field Profiles from Shock-CME Standoff Distances

Coronagraphs observe coronal mass ejections (CMEs) and driven shocks in white light images.From these observations the shocks speed and the shocks standoff distance from the CMEs leading edge can be derived. Using these quantities, theoretical relationships between the shocks Alfvenic Mach number MA and standoff distance, and empirical radial profiles for the solar wind velocity and number density, the radial magnetic field profile upstream of the shock can be calculated. These profiles cannot be measured directly. We test the accuracy of this method for estimating the radial magnetic field profile upstream of the shock by simulating a sample CME that occurred on 29 November 2013 using the three-dimensional (3-D) magnetohydrodynamic Block-Adaptive-Tree-Solar wind-Roe-Upwind-Scheme code, retrieving shock-CME standoff distances from the simulation, and comparing the estimated and simulated radial magnetic field profiles. We find good agreement between the two profiles (within +/-30%) between 1.8 and 10R.Our simulations confirm that a linear relationship exists between the standoff distance and the inverse compression ratio at the shock. We also find very good agreement between the empirical and simulated radial profiles of the number density and speed of the solar wind and inner corona.

Schmidt, J. M.↗
NASA NTRS2002

X-38 Bolt Retractor Subsystem Separation Demonstration

The Flight Robotics Laboratory FRL successfully demonstrated the X-38 bolt retractor subsystem (BRS). The BRS design was proven safe by testing in the Pyrotechnic Shock Facility (PSI) before being demonstrated in the FRL. This Technical Memorandum describes the BRS, FRL, PSF, and interface hardware. Bolt retraction time, spacecraft simulator acceleration, and a force analysis are also presented. The purpose of the demonstration was to show the FRL capability for spacecraft separation testing using pyrotechnics. Although a formal test was not performed due to schedule and budget constraints, the data will show that the BRS is a successful design concept and the FRL is suitable for future separation tests.

Rugless, Fedoria↗
NASA NTRS1974

Shock shapes of blunt bodies in hypersonic helium, air, and CO2 flows

A primary factor governing hypersonic flowfield characteristics of blunt vehicles entering planetary atmospheres is the normal shock density ratio. Hence, a means of duplicating or simulating the high density ratios experienced during planetary entry is needed. One facility having the capability of generating a range of hypersonic-hypervelocity flow conditions in arbitrary test gases is the expansion tube. Preliminary shock shape results obtained in the Langley 6-in. expansion tube at hypersonic conditions are presented. Normal shock density ratios from approximately 4 to 19 were generated using helium, air, and CO2 test gases at freestream velocities from 5 to 7 km/sec. Test models were a flat-faced cylinder and the Viking aeroshell.

Miller, C. G.↗
NASA NTRS1994

Electron acceleration at nearly perpendicular collisionless shocks. 3: Downstream distributions

Spacecraft observations at the Earth's bow shock and at interplanetary shocks have established that the largest fluxes of accelerated suprathermal electrons occur in so-called shock spike events immediately downstream of the shock ramp. Previous theoretical efforts have mainly focused on explaining upstream energetic electron beams. Here we investigate the general motion and acceleration of energetic electrons in a curved, nearly perpendicular shock by numerically integrating the orbits of solar wind halo electrons in shock fields generated by a hybrid simulation (core electron fluid and kinetic ions). Close to the angle Theta(sub Bn) = 90 degs between the upstream magnetic field and shock normal, the calculations result in a (perpendicular) temperature increase proportional to the magnetic field ratio and give the highest phase space densities in the overshoot. For a steep distribution, the temperature change can correspond to an enhancement of the distribution by several orders of magnitude. These results are in agreement with predictions from adiabatic mapping. With smaller angles Theta(sub Bn), the overshoot and downstream densities fall off quickly, because the adiabatic energy gain is less and fewer electrons transmit. The shock curvature also leads to an accumulation of electrons close to 90 degs. Without pitch angle scattering, energization is only significant within a few (approximately 5 to 10 degs) degrees of the point of tangency. However, shock spike events appear to be observed more easily and farther away from 90 degs. Given that over a region of several degrees around 90 degs the theory gives enhancements of up to approximately 4 orders of magnitude, such electrons could in principle account for the typically observed enhancements of 1 to 2 orders of magnitude, if they were distributed over Theta(sub Bn). To test the idea that scattering could efficiently redistribute the energetic electrons, we have conducted test particle simulations in which artificial pitch angle scattering is included. We find that such a process can indeed be very efficient and can explain observations of shock spike events far away from Theta(sub Bn) is approximately 90 degs. The scattering naturally leads to much higher phase space densities at smaller Theta(sub Bn) than what a local one-dimensional mapping would predict and thus can account for an observed discrepancy with adiabatic theory stated in the literature.

Krauss-Varban, D.↗
NASA NTRS1954

Behavior of Materials Under Conditions of Thermal Stress

A review is presented of available information on the behavior of brittle and ductile materials under conditions of thermal stress and thermal shock. For brittle materials, a simple formula relating physical properties to thermal-shock resistance is derived and used to determine the relative significance of two indices currently in use for rating materials. For ductile materials, thermal-shock resistance depends upon the complex interrelation among several metallurgical variables which seriously affect strength and ductility. These variables are briefly discussed and illustrated from literature sources. The importance of simulating operating conditions in tests for rating materials is especially to be emphasized because of the importance of testing conditions in metallurgy. A number of practical methods that have been used to minimize the deleterious effects of thermal stress and thermal shock are outlined.

Manson, S S↗
NASA NTRS1981

Acoustic and aerodynamic performance investigation of inverted velocity profile coannular plug nozzles

The results of model scale parametric static and wind tunnel aerodynamic performance tests on unsuppressed coannular plug nozzle configurations with inverted velocity profile are discussed. The nozzle configurations are high-radius-ratio coannular plug nozzles applicable to dual-stream exhaust systems typical of a variable cycle engine for Advanced Supersonic Transport application. In all, seven acoustic models and eight aerodynamic performance models were tested. The nozzle geometric variables included outer stream radius ratio, inner stream to outer stream ratio, and inner stream plug shape. When compared to a conical nozzle at the same specific thrust, the results of the static acoustic tests with the coannular nozzles showed noise reductions of up to 7 PNdB. Extensive data analysis showed that the overall acoustic results can be well correlated using the mixed stream velocity and the mixed stream density. Results also showed that suppression levels are geometry and flow regulation dependent with the outer stream radius ratio, inner stream-to-outer stream velocity ratio and inner stream velocity ratio and inner stream plug shape, as the primary suppression parameters. In addition, high-radius ratio coannular plug nozzles were found to yield shock associated noise level reductions relative to a conical nozzle. The wind tunnel aerodynamic tests showed that static and simulated flight thrust coefficient at typical takeoff conditions are quite good - up to 0.98 at static conditions and 0.974 at a takeoff Mach number of 0.36. At low inner stream flow conditions significant thrust loss was observed. Using an inner stream conical plug resulted in 1% to 2% higher performance levels than nozzle geometries using a bent inner plug.

Knott, P. R.↗
NASA NTRS1981

Materials characterization study of conductive flexible second surface mirrors

The status of prequalification and qualification work on conductive flexible second surface mirrors is described. The basic material is FEP Teflon witn either aluminium or silver vacuum deposited reflectors. The top layer has been made conductive by deposition of layer of a indium oxide. The results of a prequalification program comprised of decontamination, humidity, thermal cycling, thermal shock and vibration tests are presented. Thermo-optical and electrical properties. The results of a prequalification program comprised of decontamination, humidity, thermal cycling, thermal shock and vibration tests are presented. Thermo-optical and electrical properties, the electrostatic behavior of the materials under simulated substorm environment and electrical conductivity at low temperatures are characterized. The effects of simulated ultra violet and particles irradiation on electrical and thermo-optical properties of the materials are also presented.

Levadou, F.↗
NASA NTRS1991

Accuracy of the Burnett equations for hypersonic real gas flows

Burnett solutions for the structure of normal shock waves for Mach numbers ranging from 1.1 to 50 have been obtained by using the time-dependent equation set in conjunction with modern computational fluid dynamic techniques. The current work seeks to provide corrected and improved high-resolution direct simulation Monte Carlo (DSMC) results for hypersonic shocks in monatomic gases. These DSMC results will serve as a reliable test base for assessing the accuracy of various continuum equations more advanced than Navier-Stokes, such as the Burnett equations. The main conclusion of Fisko and Chapman (1988) that the Burnett equations are more accurate than the Navier-Stokes equations for all gases and at all Mach numbers in matching DSMC shock wave results is reassesed by comparing the improved and corrected DSMC results with continuum Burnett results. Various Burnett results for shocks in a diatomic gas, nitrogen, which include improvements to the work of Lumpkin and Chapman (1989) are presented. It is concluded that the Burnett equations represent a significant improvement over Navier-Stokes equations for flows exhibiting translational nonequilibrium.

Lumpkin, Forrest E., III↗
NASA NTRS1996

High Resolution Euler Solvers Based on the Space-Time Conservation Element and Solution Element Method

The I-D, quasi I-D and 2-D Euler solvers based on the method of space-time conservation element and solution element are used to simulate various flow phenomena including shock waves, Mach stem, contact surface, expansion waves, and their intersections and reflections. Seven test problems are solved to demonstrate the capability of this method for handling unsteady compressible flows in various configurations. Numerical results so obtained are compared with exact solutions and/or numerical solutions obtained by schemes based on other established computational techniques. Comparisons show that the present Euler solvers can generate highly accurate numerical solutions to complex flow problems in a straightforward manner without using any ad hoc techniques in the scheme.

Wang, Xiao-Yen↗
NASA NTRS2010

Ablative Rocket Deflector Testing and Computational Modeling

A deflector risk mitigation program was recently conducted at the NASA Stennis Space Center. The primary objective was to develop a database that characterizes the behavior of industry-grade refractory materials subjected to rocket plume impingement conditions commonly experienced on static test stands. The program consisted of short and long duration engine tests where the supersonic exhaust flow from the engine impinged on an ablative panel. Quasi time-dependent erosion depths and patterns generated by the plume impingement were recorded for a variety of different ablative materials. The erosion behavior was found to be highly dependent on the material s composition and corresponding thermal properties. For example, in the case of the HP CAST 93Z ablative material, the erosion rate actually decreased under continued thermal heating conditions due to the formation of a low thermal conductivity "crystallization" layer. The "crystallization" layer produced near the surface of the material provided an effective insulation from the hot rocket exhaust plume. To gain further insight into the complex interaction of the plume with the ablative deflector, computational fluid dynamic modeling was performed in parallel to the ablative panel testing. The results from the current study demonstrated that locally high heating occurred due to shock reflections. These localized regions of shock-induced heat flux resulted in non-uniform erosion of the ablative panels. In turn, it was observed that the non-uniform erosion exacerbated the localized shock heating causing eventual plume separation and reversed flow for long duration tests under certain conditions. Overall, the flow simulations compared very well with the available experimental data obtained during this project.

Allgood, Daniel C.↗
NASA NTRS2010

Fiber-Based Measurement of Bow-Shock Spectra for Reentry Flight Testing

We demonstrated a fiber-based approach for obtaining optical spectra of a glowing bow shock in a high-enthalpy air flow. The work was performed in a ground test with the NASA Ames Aerodynamic Heating Facility (AHF) that is used for atmospheric reentry simulation. The method uses a commercial fiber optic that is embedded in the nose of an ablating bluntbody model and provides a line-of-sight view in the streamwise direction - directly upstream into the hot post-shock gas flow. Both phenolic impregnated carbon ablator (PICA) and phenolic carbon (PhenCarb 28) materials were used as thermal protection systems. Results show that the fibers survive the intense heat and operate sufficiently well during the first several seconds of a typical AHF run (20 MJ/kg). This approach allowed the acquisition of optical spectra, enabling a Boltzmann-based electronic excitation temperature measurement from Cu atom impurities (averaged over a line-of-sight through the gas cap, with a 0.04 sec integration time).

Schott, Timothy D.↗
NASA NTRS2013

Comparative Study on High-Order Positivity-preserving WENO Schemes

The goal of this study is to compare the results obtained by non-positivity-preserving methods with the recently developed positivity-preserving schemes for representative test cases. In particular the more di cult 3D Noh and Sedov problems are considered. These test cases are chosen because of the negative pressure/density most often exhibited by standard high-order shock-capturing schemes. The simulation of a hypersonic nonequilibrium viscous shock tube that is related to the NASA Electric Arc Shock Tube (EAST) is also included. EAST is a high-temperature and high Mach number viscous nonequilibrium ow consisting of 13 species. In addition, as most common shock-capturing schemes have been developed for problems without source terms, when applied to problems with nonlinear and/or sti source terms these methods can result in spurious solutions, even when solving a conservative system of equations with a conservative scheme. This kind of behavior can be observed even for a scalar case (LeVeque & Yee 1990) as well as for the case consisting of two species and one reaction (Wang et al. 2012). For further information concerning this issue see (LeVeque & Yee 1990; Griffiths et al. 1992; Lafon & Yee 1996; Yee et al. 2012). This EAST example indicated that standard high-order shock-capturing methods exhibit instability of density/pressure in addition to grid-dependent discontinuity locations with insufficient grid points. The evaluation of these test cases is based on the stability of the numerical schemes together with the accuracy of the obtained solutions.

Kotov, Dmitry V.↗
NASA NTRS2008

Production of Magnetic Turbulence by Cosmic Rays Drifting Upstream of Supernova Remnant Shocks

I will present results of our recent two- and three-dimensional Particle-In-Cell simulations of magnetic-turbulence production by cosmic-ray ions drifting upstream of supernova remnant shocks. These studies' aim is twofold: test recent predictions of strong amplification in short wavelength, non-resonant wave modes, and study the subsequent evolution of the magnetic turbulence, including its backreaction on cosmic-ray trajectories. We confirm that the drifting cosmic rays give rise to a turbulent magnetic field, but show that an oblique filamentary mode grows more rapidly than the non-resonant parallel modes found in analytical theory. The field perturbations grow more slowly than estimated using a quasi-linear analytical approach for the parallel plane-wave mode, and saturate in amplitude at deltaB/B approximately equal to 1. The backreaction of the magnetic turbulence on the particles leads to an alignment of the bulk-flow velocities of the cosmic rays and the background medium. This is an essential characteristic of cosmic ray-modified shocks: the upstream flow speed is continuously changed by the cosmic rays. The reduction of relative drift between cosmic rays and background medium accounts for the saturation of the instability at only moderate magnetic-field amplitudes. It is possible that the prolonged magnetic field growth observed in recent MHD simulations results from a cosmic-ray current assumed to be constant and thus immune to the backreaction from the turbulent field. We speculate that the parallel plane-wave mode found in analytical treatments very quickly leads co filamentation, which we observe in our PIC modeling and is also apparent in the MHD simulations.

Stroman, Thomas↗
NASA NTRS1979

Transonic airfoil codes

Computer codes for the design and analysis of transonic airfoils are considered. The design code relies on the method of complex characteristics in the hodograph plane to construct shockless airfoil. The analysis code uses artificial viscosity to calculate flows with weak shock waves at off-design conditions. Comparisons with experiments show that an excellent simulation of two dimensional wind tunnel tests is obtained. The codes have been widely adopted by the aircraft industry as a tool for the development of supercritical wing technology.

Garabedian, P. R.↗