Search NASA⌕ Search

SEARCH · Search NASA

Results for “simultaneous optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

NASA's Human Mission to a Near-Earth Asteroid: Landing on a Moving Target

This paper describes a Bayesian approach for comparing the productivity and cost-risk tradeoffs of sending versus not sending one or more robotic surveyor missions prior to a human mission to land on an asteroid. The expected value of sample information based on productivity combined with parametric variations in the prior probability an asteroid might be found suitable for landing were used to assess the optimal number of spacecraft and asteroids to survey. The analysis supports the value of surveyor missions to asteroids and indicates one launch with two spacecraft going simultaneously to two independent asteroids appears optimal.

precursor decision making↗
NASA NTRS1985

Optimal Sensor Locations for Structural Identification

The optimum sensor location problem, OSLP, may be thought of in terms of the set of systems, S, the class of input time functions, I, and the identification algorithm (estimator) used, E. Thus, for a given time history of input, the technique of determining the OSL requires, in general, the solution of the optimization and the identification problems simultaneously. A technique which uncouples the two problems is introduced. This is done by means of the concept of an efficient estimator for which the covariance of the parameter estimates is inversely proportional to the Fisher Information Matrix.

Udwadia, F. E.↗
NASA NTRS1990

Integrated Aerodynamic and Control System Design of Oblique Wing Aircraft

An efficient high speed aircraft design must achieve a high lift to drag ratio at transonic and supersonic speeds. In 1952 Dr. R. T. Jones proved that for any flight Mach number minimum drag at a fixed lift is achieved by an elliptic wing planform with an appropriate oblique sweep angle. Since then, wind tunnel tests and numerical flow models have confirmed that the compressibility drag of oblique wing aircraft is lower than similar symmetrical sweep designs. At oblique sweep angles above thirty degrees the highly asymmetric planform gives rise to aerodynamic and inertia couplings which affect stability and degrade the aircraft's handling qualities. In the case of the NASA-Rockwell Oblique Wing Research Aircraft, attempts to improve the handling qualities by implementing a stability augmentation system have produced unsatisfactory results because of an inherent lack of controllability in the proposed design. The present work focuses on improving the handling qualities of oblique wing aircraft by including aerodynamic configuration parameters as variables in the control system synthesis to provide additional degrees of freedom with which to further decouple the aircraft's response. Handling qualities are measured using a quadratic cost function identical to that considered in optimal control problems, but the controller architecture is not restricted to full state feedback. An optimization procedure is used to simultaneously solve for the aircraft configuration and control gains which maximize a handling qualities measure, while meeting imposed constraints on trim. In some designs wing flexibility is also modeled and reduced order controllers are implemented. Oblique wing aircraft synthesized by this integrated design method show significant improvement in handling qualities when compared to the originally proposed closed loop aircraft. The integrated design synthesis method is then extended to show how handling qualities may be traded for other types of mission performance (drag, weight, etc.). Examples are presented which show how performance can be maximized while maintaining a desired level of handling quality.

Morris, Stephen James↗
NASA NTRS1988

On-orbit parametric identification methodology

On-orbit system identification (ID) of large space systems is essential for various reasons. For example, the complex composite structure of such systems cannot be ground-tested; their structural dynamic characteristics must be known accurately in order to accomplish active control. Furthermore, such capability can be used to characterize/identify various disturbances. The identification process is consisted of four principal elements: (1) modeling, (2) the estimation algorithm, (3) input system, and (4) measurement system. These elements are highly correlated and all togerher determine the success of the identification problem. Accurate modeling of large space systems is the most important element of the identification process. Large flexible structures are non-linear and infinite dimensional systems with highly coupled parameters and low frequency packed modes. In addition, these systems are subject to stochastic and time-varying disturbances, they have structural parameters which can vary due to on-orbit assembly deployment, and operations. These systems are generally; however, represented by constant coefficient, finite order differential equations. The non-linearities, coupling and noise effects are also often neglected. Moreover, identification experiment designs which lead to highly complex optimization problems usually require the simultaneous choice of ID algorithm, sensor, and actuator type and placement. On-orbit bandwidth and power restrictions on excitation, limited data window, and restrictions on sensor/actuator type, placement and number, has led to practical questions of implementations.

Hadaegh, Fred Y.↗
NASA NTRS2005

Aerodynamic Parameter Estimation for the X-43A (Hyper-X) from Flight Data

Aerodynamic parameters were estimated based on flight data from the third flight of the X-43A hypersonic research vehicle, also called Hyper-X. Maneuvers were flown using multiple orthogonal phase-optimized sweep inputs applied as simultaneous control surface perturbations at Mach 8, 7, 6, 5, 4, and 3 during the vehicle descent. Aerodynamic parameters, consisting of non-dimensional longitudinal and lateral stability and control derivatives, were estimated from flight data at each Mach number. Multi-step inputs at nearly the same flight conditions were also flown to assess the prediction capability of the identified models. Prediction errors were found to be comparable in magnitude to the modeling errors, which indicates accurate modeling. Aerodynamic parameter estimates were plotted as a function of Mach number, and compared with estimates from the pre-flight aerodynamic database, which was based on wind-tunnel tests and computational fluid dynamics. Agreement between flight estimates and values computed from the aerodynamic database was excellent overall.

Morelli, Eugene A.↗
NASA NTRS2019

Real-Time Estimation of Bare-Airframe Frequency Responses from Closed-Loop Data and Multisine Inputs

A method is presented for computing frequency responses of multiple-input multiple-output bare-airframe dynamics from flight test data containing feedback control and/or mixing of control effectors. Orthogonal phase-optimized multisines are used to simultaneously excite each input with unique harmonic frequencies, at which frequency responses are computed as ratios of output-to-input Fourier transform data. The confounding effects of feedback and mixing for frequency response estimation are resolved by interpolating the frequency responses among all the harmonic frequencies. The method can be run in batch for post-flight analysis, or in real time as the aircraft is flying. The effectiveness of the method was verified using closed-loop simulations of the subscale NASA T-2 generic transport airplane. The method was also demonstrated using flight test data from the X-56A MUTT aeroelastic airplane, which was flown with feedback control and mixing.

Jared A Grauer↗
NASA NTRSDate not supplied

PyroCbs from Australia Fires and its Impact Using Satellite Observations from CrIS and TROPOMI and Reanalysis Data

Pyrocumulonimbus (pyroCb) clouds are thunder clouds created by intense heat from the Earth’s surface. They are formed similarly to cumulonimbus clouds, but the intense heat that results in the vigorous updraft comes from fire, either large wildfires or volcanic eruptions. Australia’s unprecedented fire disasters at the end of 2019 to early 2020 emitted huge amounts of carbon monoxide (CO) and fire aerosol particles to the atmosphere, particularly during the pyroCb outbreak that occurred in southeast Australia between 29 December 2019 and 4 January 2020. It was estimated that at least 18 pyroCbs were generated during this episode, and some of them injected ice, smoke, and biomass burning gases above the local tropopause. An unprecedented abundance of H2O and CO in the stratosphere, and the displacement of background ozone (O3) and N2O from rapid ascent of air from the troposphere and lower stratosphere were found from satellite observations. Some other studies also found that the fire emissions and their long-range transport resulted in stratospheric aerosol, temperature, and O3 anomalies after the 2020 Australian bushfires and altered the Antarctic ozone and vortex, posing great impact to local air quality and climate change. Further study on the atmospheric thermodynamic status of atmosphere associated with these pyroCbs, and the change of the cloud properties and trace gases during this unprecedented Australia fires will be made using a new single Field of View (SFOV) Sounder Atmospheric Products (SiFSAP). SiFSAP was developed by NASA using the Cross-track Infrared Sounder (CrIS) and Advanced Technology Microwave Sounder (ATMS) onboard SNPP and JPSS-1, and will soon be available to the public at NASA DAAC. Since this product has a spatial resolution of 15 km at nadir, which is better than most global weather and climate models and other current operational sounding products, a process-oriented analysis of the dynamic transport of CO and fire plumes during this unprecedented fire disasters will be made in this study. Based on a Principal Component Radiative Transfer Model (PCRTM) and an optimized estimation retrieval algorithm, a simultaneously retrieval is made using the whole spectral information measured by CrIS, and the derived SiFSAP include temperature, water vapor, trace gases (such as O3, CO2, CO, CH4 and N2O), cloud properties and surface properties. Use of ATMS together with CrIS allows SiFSAP to get accurate retrieval products under thick pyroCb conditions, and an algorithm to detect pyroCb based on the hyperspectral infrared sounder spectrum from CrIS will be developed and verified. In addition to SiFSAP sounding products, other products like CO, O3, NO2 from TROPOMI, O3 from OMPS will be used for retrospective analysis. The wind fields from the NASA’s Modern-Era Retrospective Analysis for Research and Applications Version-2 (MERRA-2) and ERA5 will be used to characterize the transport, and the SiFSAP temperature and water vapor profiles within and around pyroCbs will be compared with MERRA-2 and ERA5 products.

Xiaozhen (Shawn) Xiong↗
NASA NTRS1987

Robust eigenstructure assignment by a projection method: Application using multiple optimization criteria

New ideas which lead to feedback control laws for large flexible structures which are insensitive to model uncertainty are presented. A pole placement method is presented which leads to near-unitary closed loop eigenvectors, and a new method is introduced to design the control while simultaneously considering three competing measures of optimality. Robustness versus Integral algorithms are applicable to at least moderately high-dimensioned systems. In the present discussion, controls for two coupled flexible bodies are considered. A 6x24 gain matrix is designed to control a 12 modes system using 6 actuators. Researchers also developed control laws for the R2P2 simulator at Martin Marietta; in this case 3 actuators are used to control a 12th order system. Simulation studies indicate that researchers indeed achieved robust designs without significant difficulties associated with spillover into the uncontrolled modes. Here, several key ideas and numerical results are given. In the references, details of the formulation, discussions of salient features, and connection to the availiable literature are given.

Junkins, J. L.↗
NASA NTRS1986

Propeller design by optimization

The feasibility of designing propellers by an optimization procedure is investigated. A scheme, which solves the full potential flow equation about a propeller by line relaxation, is modified so that the iterative solutions of the flow equation and the design parameters are updated simultaneously. Some technical problems in using optimization for designing propellers with maximum efficiency are identified. Approaches for overcoming these problems are presented.

Rizk, M. H.↗
NASA NTRS1989

Expansion and orthogonalization of measured modes for structure identification

The purpose was to investigate a new simultaneous expansion/orthogonalization method in comparison with two previously published expansion methods and a widely used orthogonalization technique. Each expansion method uses data from an analytical model of the structure to complete the estimate of the mode shape vectors. Berman and Nagy used Guyan expansion in their work with improving analytical models. In this method, modes are expanded one at a time, producing a set not orthogonal with respect to the mass matrix. Baruch and Bar Itzhack's optimal orthogonalization procedure was used to subsequently adjust the expanded modes. A second expansion technique was presented by O'Callahan, Avitabile, and Reimer and separately by Kammer. Again, modes are expanded individually and orthogonalized after expansion with the same optimal technique as above. Finally, a simultaneous expansion/orthogonalization method was developed from the orthogonal Procrustes problem of computational mathematics. In this method modes are optimally expanded as a set and orthogonal with respect to the mass matrix as a result. Two demonstation problems were selected for the comparison of the methods described. The first problem is an 8 degree of freedom spring-mass problem first presented by Kabe. Several conditions were examined for expansion method including the presence of errors in the measured data and in the analysis models. As a second demonstration problem, data from tests of laboratory scale model truss structures was expanded for system identification. Tests with a complete structure produced a correlated analysis model and the stiffness and mass matrices. Tests of various damaged configurations produced measured data for 6 modes at 14 dof locations.

Smith, Suzanne Weaver↗
NASA NTRS1983

Optimal design and use of retry in fault tolerant real-time computer systems

A new method to determin an optimal retry policy and for use in retry of fault characterization is presented. An optimal retry policy for a given fault characteristic, which determines the maximum allowable retry durations to minimize the total task completion time was derived. The combined fault characterization and retry decision, in which the characteristics of fault are estimated simultaneously with the determination of the optimal retry policy were carried out. Two solution approaches were developed, one based on the point estimation and the other on the Bayes sequential decision. The maximum likelihood estimators are used for the first approach, and the backward induction for testing hypotheses in the second approach. Numerical examples in which all the durations associated with faults have monotone hazard functions, e.g., exponential, Weibull and gamma distributions are presented. These are standard distributions commonly used for modeling analysis and faults.

Lee, Y. H.↗
NASA NTRSDate not supplied

Parametric Optimization of Rigid Wheels for Planetary Surface Mobility Applications

Design-Build-Test approaches for spaceflight hardware are time and cost intensive, which can result in suboptimal mechanism designs. Optimization-based approaches that utilize high-fidelity models and physics simulation could overcome these limitations while simultaneously speeding up the mechanical design process and reducing cost. In this work, we present a toolchain that enables the multi-objective optimization of rigid rover wheels for planetary surface mobility applications. The toolchain uses Chrono’s Continuous Representation Model (CRM) functionality to simulate granular soil and performs multi-objective parametric optimization on candidate rover wheels to meet a desired performance criterion. The resulting wheel design is then evaluated experimentally using a single-wheel testbed. We end with a discussion of how the toolchain can be extended to simultaneously co-optimize other system parameters, such as system power consumption and feedback control gains.

Optimization↗
NASA NTRS1991

PDEMOD: Software for control/structures optimization

Because of the possibility of adverse interaction between the control system and the structural dynamics of large, flexible spacecraft, great care must be taken to ensure stability and system performance. Because of the high cost of insertion of mass into low earth orbit, it is prudent to optimize the roles of structure and control systems simultaneously. Because of the difficulty and the computational burden in modeling and analyzing the control structure system dynamics, the total problem is often split and treated iteratively. It would aid design if the control structure system dynamics could be represented in a single system of equations. With the use of the software PDEMOD (Partial Differential Equation Model), it is now possible to optimize structure and control systems simultaneously. The distributed parameter modeling approach enables embedding the control system dynamics into the same equations for the structural dynamics model. By doing this, the current difficulties involved in model order reduction are avoided. The NASA Mini-MAST truss is used an an example for studying integrated control structure design.

Taylor, Lawrence W., Jr.↗
NASA NTRS1985

Optimal cooperative control synthesis of active displays

A technique is developed that is intended to provide a systematic approach to synthesizing display augmentation for optimal manual control in complex, closed-loop tasks. A cooperative control synthesis technique, previously developed to design pilot-optimal control augmentation for the plant, is extended to incorporate the simultaneous design of performance enhancing displays. The technique utilizes an optimal control model of the man in the loop. It is applied to the design of a quickening control law for a display and a simple K/s(2) plant, and then to an F-15 type aircraft in a multi-channel task. Utilizing the closed loop modeling and analysis procedures, the results from the display design algorithm are evaluated and an analytical validation is performed. Experimental validation is recommended for future efforts.

Garg, S.↗
NASA NTRS1987

Optimal cooperative control synthesis of active displays

A technique is developed that is intended to provide a systematic approach to synthesizing display augmentation for optimal manual control in complex, closed-loop tasks. A cooperative control synthesis technique, previously developed to design pilot-optimal control augmentation for the plant, is extended to incorporate the simultaneous design of performance enhancing displays. The technique utilizes an optimal control model of the man in the loop. It is applied to the design of a quickening control law for a display and a simple K/(s squared) plant, and then to an F-15 type aircraft in a multichannel task. Utilizing the closed-loop modeling and analysis procedures, the results from the display design algorithm are evaluated and an analytical validation is performed. Experimental validation is recommended for future efforts.

Gary, Sanjay↗
NASA NTRS1986

Single step optimization of feedback-decoupled collision avoidance manipulator maneuvers

Simultaneous robot path planning and path following is shown to be achievable in the presence of motor saturation and obstacle avoidance requirements. The discrete time algorithm derived performs one step ahead mean square optimization of commanded joint accelerations, subject to present actuator force or torque constraints and N step ahead prediction of configuration constraints.

Chen, N.↗
NASA NTRS1978

Pilot-optimal augmentation synthesis

An augmentation synthesis method usable in the absence of quantitative handling qualities specifications, and yet explicitly including design objectives based on pilot-rating concepts, is presented. The algorithm involves the unique approach of simultaneously solving for the stability augmentation system (SAS) gains, pilot equalization and pilot rating prediction via optimal control techniques. Simultaneous solution is required in this case since the pilot model (gains, etc.) depends upon the augmented plant dynamics, and the augmentation is obviously not a priori known. Another special feature is the use of the pilot's objective function (from which the pilot model evolves) to design the SAS.

Schmidt, D. K.↗
NASA NTRS1995

Development of multiobjective optimization techniques for sonic boom minimization

An optimization procedure is developed for the simultaneous improvement of the aerodynamic and sonic boom characteristics of high speed aircraft. From a sonic boom perspective, it is desirable to minimize the first peak in the overpressure signal at a specified distance away from the aircraft. From aerodynamic point of view, the aerodynamic drag coefficient ratio must be minimized while maintaining the lift coefficient at desired level. The optimization procedure is applied to wing-body configurations related to high speed aircraft. The objectives of this current research are: (1) development of a multiobjective optimization procedure for aerospace vehicles with the integration of sonic boom and aerodynamic performance criteria; and (2) development of semi-analytical approach for calculating sonic boom design sensitivities.

Chattopadhyay, Aditi↗