Search NASA⌕ Search

SEARCH · Search NASA

Results for “site selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Wind turbine siting: A summary of the state of the art

The process of siting large wind turbines may be divided into two broad steps: site selection, and site evaluation. Site selection is the process of locating windy sites where wind energy development shows promise of economic viability. Site evaluation is the process of determining in detail for a given site the economic potential of the site. The state of the art in the first aspect of siting, site selection is emphasized. Several techniques for assessing the wind resource were explored or developed in the Federal Wind Energy Program. Local topography and meteorology will determine which of the techniques should be used in locating potential sites. None of the techniques can do the job alone, none are foolproof, and all require considerable knowledge and experience to apply correctly. Therefore, efficient siting requires a strategy which is founded on broad based application of several techniques without relying solely on one narrow field of expertise.

Hiester, T. R.↗
NASA NTRS2017

Multi-Modal Active Perception for Autonomously Selecting Landing Sites on Icy Moons

Selecting suitable landing sites is fundamental to achieving many mission objectives in planetary robotic lander missions. However, due to sensing limitations, landing sites which are both safe and scientifically valuable often cannot be determined reliably from orbit, particularly, in icy moon missions where orbital sensing data is noisy and incomplete. This paper presents an active perception approach to Entry Descent and Landing (EDL) which enables the lander to autonomously plan informative descent trajectories, acquire high quality sensing data during descent and exploit this additional information to select higher utility landing sites. Our approach consists of two components: probabilistic modeling of landing site features and approximate trajectory planning using a sampling based planner. The proposed framework allows the lander to plan long horizons paths and remain robust to noisy data. Results in simulated environments show large performance improvements over alternative approaches and show promise that our approach has strong potential to improve science return of not only icy moon missions but EDL systems in general.

autonomy↗
DOE OSTI2020

Update on the Status of Deep Borehole Disposal of High-Level Radioactive Waste in Germany - 20285

The phase-out of nuclear energy in Germany will take place in 2022. A site for final disposal of high level radioactive waste (HLRW) has not yet been found, but a site selection process was restarted by Act on the Search for and Selection of a Site for a Disposal Facility for High-Level Radioactive Waste (Site Selection Act - StandAG 2017). This act was based on a recommendation by a commission which also advised to follow up the development of deep borehole disposal (DBD) as an alternative option for final disposal of HLRW. This paper summarizes briefly the status of DBD in Germany and if this option should be pursued in Germany. Although there are some merits of DBD, it can only be a real option if research and development is supported. The technical equipment for boreholes of the required size will only be developed if there is funding and a feasibility test. Furthermore, any concept of DBD and technology must be detailed further, and some requirements of the act must be reconsidered. The paper concludes that despite the possible merits of DBD, the political and financial support for R and D will only be provided for the time being if DBD is pushed by interested parties. Alternatively, if the site selection procedure is not progressing well, then the alternative option of DBD may find greater interest in the future. However, its availability will be severely limited due to the missing development of detailed concepts and its demonstration of feasibility. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1983

A correlation analysis of percent canopy closure versus TMS spectral response for selected forest sites in the San Juan National Forest, Colorado

The correlation of canopy closure with the signal response of individual thematic mapper simulator (TMS) bands for selected forest sites in the San Juan National Forest, Colorado was investigated. Ground truth consisted of a photointerpreted determination of percent canopy closure of 0 to 100 percent for 32 sites. The sites selected were situated on plateaus at an elevation of approximately 3 km with slope or = 10 percent. The predominant tree species were ponderosa pine and aspen. The mean TMS response per band per site was calculated from data acquired by aircraft during mid-September, 1981. A correlation analysis of TMS response vs. canopy closure resulted in the following correlation coefficients for bands 1 through 7, respectively: -0.757, -0.663, -0.666, -0.088, -0.797, -0.763. Two model regressions were applied to the TMS data set to create a map of predicted percent forest canopy closure for the study area. Results indicated percent predictive accuracies of 71, 74, and 57 for percent canopy closure classes of 0-25, 25-75, and 75-100, respectively.

Butera, M. K.↗
DOE OSTI2022

Composite Analysis Vadose Zone Transport of Selected Hanford Site Composite Analysis: Vadose Zone Transport of Selected Radionuclides Released from DOE O 435.1 Waste Sites

The main objectives of the composite analysis (CA) compliance case vadose zone (VZ) facet are to simulate transport of radionuclide releases from the surface to the water table, and to provide radionuclide transfer rates to groundwater for inclusion into the Plateau-to-River (P2R) saturated zone (SZ) model (CP-57037, Model Package Report: Plateau to River Groundwater Model, Version 8.3). The parallel exascale version of the Subsurface Transport Over Multiple Phases (eSTOMP) simulator is used to simulate flow and transport for the CA VZ models. The CA compliance case approach to address the scale and distribution of contaminant sources in the VZ facet is to subdivide the Hanford Site Central Plateau into 26 models that contain contaminant sources and liquid discharges likely to commingle during migration through the VZ to the water table.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Hanford Site Composite Analysis: Comparison of One- and Three-Dimensional Simulation of Vadose Zone Transport and Transfer to Groundwater for Selected Waste Sites

The purpose of this document is to compare 1D and 3D technetium-99 (Tc-99) VZ transport and transfer rates to groundwater for five selected waste sites (two tanks, two cribs, and one trench) to demonstrate the need to consider 3D flow and transport mechanisms and commingling of contaminant plumes originating from adjacent waste sites. The waste sites selected for the comparison evaluation are the 241-A-105 Tank in the A Farms Area model, the 216-B-18 Crib and the 216-B-25 Trench in the BC Cribs and Trenches model, the 216-B-49 Crib in the B Complex model, and the 241-SX-115 Tank in the S Farms Area model. The selected waste sites all represent different disposal or leak conditions, with and without potential impacts due to release-fluid commingling, occurring at the Hanford Site Central Plateau.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

On Temperature Limits for the Outer Surface of a Container in a Disposal Facility - 20313

The temperature in a disposal facility for high-level radioactive waste (HLRW) is an issue for safety. When the recommencement of the search for and selection of a site for a disposal facility for HLRW in Germany was stipulated by the Site Selection Act (StandAG 2017) in 2017, a precautionary temperature limit of 100 deg. C on the outer surface of the containers with high-level radioactive waste in the disposal facility section was set. This precautionary temperature limit shall be applied in preliminary safety analyses provided that the 'maximum physically possible temperatures' in the respective host rocks have not yet been determined due to pending research. Therefore, this issue is addressed and discussed in this paper, contributing to 'pending research' by a review of the literature. This paper briefly discusses a few examples of thermohydraulic, mechanical, chemical and biological processes in a disposal facility, because temperature limits are derived based on safety impacts regarding THMCB-processes. The temperature-dependent processes have been extracted from databases for features, events and processes (FEP-databases). Furthermore, it is discussed if the feasibility to retrieve and recover HLRW is hampered at high temperatures. A design temperature concerning single components of a disposal facility for the preservation of their features can be derived when a safety concept is established. However, the interactions of all relevant processes in a disposal concept must be considered to determine a specific temperature limit for the outer surface of the containers. Therefore, applicable temperature limits may vary for particular safety and disposal concepts in the following host rocks: rock salt, clay stone and crystalline rock. Technical solutions for retrieval and design options for recovery seem to be viable up to temperatures of 200 deg. C with different, sometimes severe, downsides according to expert judgement. Temperature limits regarding the outer surface of the containers can be derived specifically for each safety concept and design of the disposal facility in a host rock. General temperature limits without reference to specific safety concepts or the particular design of the disposal facility may narrow down the possibilities for optimisation of the disposal facility and could adversely affect the site selection process in finding the best suitable site. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRSDate not supplied

Hazard Boresight Relative Navigation for Safe Lunar Landing

In the area of planetary landing, hazard detection and avoidance is the act of driving a vehicle to a safe landing area using onboard resources. A hazard detection sensor is used to scan the terrain and these measurements are evaluated to determine where the safe landing sites are located. The selected site is generally not the same as the nominal target, so the vehicle must divert to the new site. This activity involves the interaction between several components, including a suite of onboard GNC algorithms that work together to efficiently choose and divert to a new site. This paper presents the Hazard Boresight Relative Navigation concept, which is a method that provides a common interface between the hazard scan, safe-site selection algorithm, size of the target-relative landing ellipse, divert offset distance and guidance targeting algorithm. After the safe-site is selected from the hazard scan, the original inertial target is replaced with a vehicle-relative target, which is initialized by a measurement from the hazard scan. The new target-relative position state is estimated over time in the navigation filter, and is fed to the guidance algorithm to perform the divert maneuver. In addition to detailing the Hazard Boresight Relative Navigation concept, this paper also presents some general landing terms that can be used in the greater discussion, as well as analysis on how to estimate and predict the vehicle footprint dispersion ellipse during flight, which is used in the safe-site selection algorithm.

Stephen R. Steffes↗
NASA NTRSDate not supplied

Hazard Boresight Relative Navigation for Safe Lunar Landing

In the area of planetary landing, hazard detection and avoidance is the act of driving a vehicle to a safe landing area using onboard resources. A hazard detection sensor is used to scan the terrain and these measurements are evaluated to determine where the safe landing sites are located. The selected site is generally not the same as the nominal target, so the vehicle must divert to the new site. This activity involves the interaction between several components, including a suite of onboard GNC algorithms that work together to efficiently choose and divert to a new site. This paper presents the Hazard Boresight Relative Navigation concept, which is a method that provides a common interface between the hazard scan, safe-site selection algorithm, size of the target-relative landing ellipse, divert offset distance and guidance targeting algorithm. After the safe-site is selected from the hazard scan, the original inertial target is replaced with a vehicle-relative target, which is initialized by a measurement from the hazard scan. The new target-relative position state is estimated over time in the navigation filter, and is fed to the guidance algorithm to perform the divert maneuver. In addition to detailing the Hazard Boresight Relative Navigation concept, this paper also presents some general landing terms that can be used in the greater discussion, as well as analysis on how to estimate and predict the vehicle footprint dispersion ellipse during flight, which is used in the safe-site selection algorithm.

Stephen Steffes↗
DOE OSTI2025

Accelerating nuclear-integrated data center pursuits in the USA: SWOT analysis, power-thermal management strategies and demonstration plan

Here, this study explores the increasing interest in leveraging nuclear power to meet the escalating energy demands of data centers in the United States (U.S.) by focusing on key factors that contribute to accelerated deployment. The study highlights the importance of N+1/N+2 power supplies (where N is the required number of units), outlines research and innovations in nuclear-integrated data center thermal management and demonstration plan. It also provides updates about status and costing of various reactor system designs. A summarized strengths, weaknesses, opportunities, and threats (SWOT) analysis shows the potential options for grid connectivity, reactors, and site selection. Suitable site discussions consider land and water availability, grid access, and optical fiber connectivity, and the study presents graded prospects for Department of Energy (DOE) sites with a specific example. Community engagement and partnerships are emphasized, particularly the roles of local government, federal agencies, utilities, and data center industry partners, which are crucial for accelerating deployment, business outreach, and approvals. The study provides actionable insights for stakeholders to accelerate the deployment of nuclear-powered data centers.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗
DOE OSTI2023

Extrapolation Domains for Aggregating Environmental Outcomes from Local to Regional Levels

Billions of dollars are invested every year to run field experiments to quantify the response of crops to new technologies and associated environmental outcomes. Given the diversity of environments where crop production occurs, conducting these research studies without a robust framework for research site selection and upscaling results to larger spatial scales is inefficient. In this project, researchers from the University of Nebraska-Lincoln used their unique Technology Extrapolation Domains framework (TED) as a tool to guide the selection of experimental sites and as basis for aggregating and validating environmental outcomes from local to regional levels. In the present project, we first used the TED framework to evaluate the current distribution and area coverage of the current SMARTFARM sites. The purpose was to showcase how it is possible to use the TED framework to guide site selection and extrapolate results over space. Additionally, the original TED framework was expanded to account for other factors influencing environmental outcomes by inclusion of three additional variables: soil organic matter, soil texture, and topographic wetness index. The resulting expanded framework (TED-E) was validated using nitrogen (N) losses from corn in the United States as a case study. To do so, we used N balance as a proxy to N losses and we evaluated the capacity of the framework to explain variation in N balance across fields and across countries. We found that the TED-E has substantially higher predictive power than the original TED framework to explain spatial variation in N balance. However, improvements in predictive power with the TED-E tool come at the expense of a higher number of TEDs needed to achieve a given crop area coverage compared with the original TED framework. We conclude that the new TED-E framework can help aggregate and extrapolate environmental outcomes from research sites to regional levels and improve the visualization of their spatial patterns across the United States. An online version of the framework is available at: https://www.toolted.org/

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Probing the Effects of Dimethyl Aluminum Isopropoxide Surface Reaction Byproducts on Atomic Layer Deposition Nucleation

Atomic layer deposition (ALD) processes that leverage a myriad of metal–organic and complementary reactant combinations have been identified to realize precise and conformal thin film growth. However, the effects of the ALD reaction byproducts on nucleation and growth mechanisms are rarely considered. Site-selective ALD processes provide an opportunity for the detailed investigation of uniform surface sites with atomistic accuracy. Intentional pretreatment with a known ALD reaction byproduct – isopropanol – enables a significant improvement in the nucleation rate reproducibility of dimethylaluminum isopropoxide and water ALD on rutile TiO 2 (110). In situ spectroscopic ellipsometry reveals a partially reversible byproduct binding that is site-selective for TiO 2 (110) surface oxygen vacancies. First-principles calculations reveal surface site-specific thermodynamics for adsorption of isopropanol and water that may influence ALD nucleation. In conclusion, the sensitivity of site-selective ALD motivates consideration of secondary surface reactions when designing precision deposition processes, including area- or site-selective ALD reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2009

The 50 Constellation Priority Sites

The Constellation program (CxP) has developed a list of 50 sites of interest on the Moon which will be targeted by the LRO narrow angle camera. The list has also been provided to the M~ team to supplement their targeting list. This list does not represent a "site selection" process; rather the goal was to find "representative" sites and terrains to understand the range of possible surface conditions for human lunar exploration to aid engineering design and operational planning. The list compilers leveraged heavily on past site selection work (e.g. Geoscience and a Lunar Base Workshop - 1988, Site Selection Strategy for a Lunar Outpost - 1990, Exploration Systems Architecture Study (ESAS) - 2005). Considerations included scientific, resource utilization, and operational merits, and a desire to span lunar terrain types. The targets have been organized into two "tiers" of 25 sites each to provide a relative priority ranking in the event of mutual interference. A LEAG SAT (special action team) was established to validate and recommend modifications to the list. This SAT was chaired by Dr. Paul Lucey. They provided their final results to CxP in May. Dr. Wendell Mendell will organize an on-going analysis of the data as they come down to ensure data quality and determine if and when a site has sufficient data to be retired from the list. The list was compiled using the best available data, however, it is understood that with the flood of new lunar data, minor modifications or adjustments may be required.

Noble, S.↗
NASA NTRS1976

Definition study for photovoltaic residential prototype system

A site evaluation was performed to assess the relative merits of different regions of the country in terms of the suitability for experimental photovoltaic powered residences. Eight sites were selected based on evaluation criteria which included population, photovoltaic systems performance and the cost of electrical energy. A parametric sensitivity analysis was performed for four selected site locations. Analytical models were developed for four different power system implementation approaches. Using the model which represents a direct (or float) charge system implementation the performance sensitivity to the following parameter variations is reported: (1) solar roof slope angle; (2) ratio of the number of series cells in the solar array to the number of series cells in the lead-acid battery; and (3) battery size. For a Cleveland site location, a system with no on site energy storage and with a maximum power tracking inverter which feeds back excess power to the utility was shown to have 19 percent greater net system output than the second place system. The experiment test plan is described. The load control and data acquisition system and the data display panel for the residence are discussed.

Shepard, N. F.↗
NASA NTRS1982

Near surface observations

Learning objectives include: (1) developing an understanding of the implications of the term "near surface observations"; (2) associating the appearance of large ground features as seen in satellite imagery with their appearance as seen from the ground; (3) grasping criteria and procedures for selecting training sites on the ground for use in supervised classification; (4) running through an example of training site selection; (5) becoming familiar with several methods of accuracy assessment; (6) becoming aware of the approach and value of making supporting measurements of the spectral and physical properties of materials on the ground and from aircraft; (7) taking note of the different types of instruments used in making specific ground measurements; and (8) appreciating the rationale underlying laboratory and field studies on or near the Earth's surface for the purpose of developing new sensor systems.

Source record↗
NASA NTRS2000

Hummingbird Comet Nucleus Analysis Mission

Hummingbird is a highly focused scientific mission, proposed to NASA s Discovery Program, designed to address the highest priority questions in cometary science-that of the chemical composition of the cometary nucleus. After rendezvous with the comet, Hummingbird would first methodically image and map the comet, then collect and analyze dust, ice and gases from the cometary atmosphere to enrich characterization of the comet and support landing site selection. Then, like its namesake, Hummingbird would carefully descend to a pre-selected surface site obtaining a high-resolution image, gather a surface material sample, acquire surface temperature and then immediately return to orbit for detailed chemical and elemental analyses followed by a high resolution post-sampling image of the site. Hummingbird s analytical laboratory contains instrumentation for a comprehensive molecular and elemental analysis of the cometary nucleus as well as an innovative surface sample acquisition device.

Kojiro, Daniel↗