Search NASA⌕ Search

SEARCH · Search NASA

Results for “species diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Facilitation of the growth of protein crystals by heterogeneous/epitaxial nucleation

A preliminary exploration has been made of the effect of inorganic crystals on the nucleation of protein crystals. Four representative proteins were crystallized by the vapor diffusion technique in the presence of fifty species of inorganic crystals. A substantial decrease in critical supersaturation was caused by thirty nucleants for canavalin and by seven to fifteen nucleants for the other proteins. Several cases of anomalous morphology were observed, as well as one instance of epitaxy, i.e., lysozyme on apophyllite. It has thus been shown that inorganic crystals can be used as heterogeneous nuclei or epitaxial substrates for facilitating reliable and controlled nucleation in automated protein crystal growth experiments.

Mcpherson, Alexander↗

A two-component volatile atmosphere for Pluto. I - The bulk hydrodynamic escape regime

The seasonal effects on Pluto's atmosphere of a simplified system of CH4 and N2 saturated over a solid solution are investigated, and the results are compared with previous CH4 models. It is found that bulk escape occurs for CH4 mole fractions less than 0.7 of Pluto's volatile reservoir. Greater CH4 abundance leads to diffusive separation during the escape of both species and an atmospheric mixing ratio of about Xc(0). If Xc(0) is in the range 0.02-0.10, Pluto's atmosphere remains largely intact at aphelion rather than virtually freezing out as it does for Xc(0) greater than 0.3 or less than 0.001, or form an atmosphere with only a single volatile gas. An upper limit for the CH4 mixing ratio is about 0.07 if N2 is the second gas. On the other hand, CH4 is the dominant surface constituent of the volatile deposit if Xc(0) is greater than 0.0001.

Trafton, L.↗

MOCVD of GaAs in a horizontal reactor - Modeling and growth

A two-dimensional model for metalorganic chemical vapor deposition of GaAs in a horizontal reactor is presented. The model is characterized by the following parameters: reactor geometry and operating pressure, thermal boundary conditions, ratio of reactants, chemical reactions, total inlet gas flow rate, as well as molecular weights, thermal conductivities, heat capacities, viscosities, and binary diffusion coefficients of the gas-phase species. Film thickness profiles predicted by the model are compared with those of GaAs thin films grown in the modeled reactor. Results obtained show a good agreement between the predictions and data over the entire length of the deposition region for the low pressure and high flow rate run. Attention is also given to the reactor design and growth conditions.

Clark, Ivan O.↗

A model for heterogeneous chemical processes on the surfaces of ice and nitric acid trihydrate particles

The study presents a model that incorporates the physics and physical chemistry of ice surfaces relevant to polar stratospheric clouds. Surface concentrations of H2O, HCl, HOCl, ClONO2, and N2O5 on ice and nitric acid trihydrate (NAT) crystals are computed, and surface reaction rates and reaction probabilities (sticking coefficients) are determined. For gas pressures of about 10 exp -7 torr and temperatures in the range of 180-200 K, HCl completely coats ice and water-rich NAT surfaces, while HOCl, ClOHO2, and N2O5 may cover 0.01-1 percent of these surfaces. The energy parameters are used to calculate surface temperatures such as adsorption and desorption constants, surface coverages, reaction rate coefficients, surface diffusion coefficients, and reaction probabilities for various species and chemical interactions on ice and NAT surfaces. Implications for chemical processing on polar stratospheric clouds are discussed.

Tabazadeh, Azadeh↗

Characteristics of Non-Premixed Turbulent Flames in Microgravity

The overall objectives of this research are: (1) to obtain and analyze experimental data on flame images, and the spatial and temporal distributions of temperature, radiation, velocity and gas-phase species in microgravity turbulent gas-jet diffusion flames; and (2) to utilize these data to validate and refine the existing predictive capabilities. Work on this project commenced in June 1996. The first investigations on turbulent gas-jet diffusion flames in microgravity were initiated by Bahadori and co-workers in 1991. These studies have shown that significant differences exist in the transition processes in normal-gravity and microgravity flames, and that the turbulent flames in microgravity behave very differently as compared to their buoyancy-dominated normal-gravity counterparts. For example, in the transition regime while the visible flame height, for given fuel and nozzle size, in normal gravity decreases, the height of the microgravity flame increases. In the fully developed turbulent regime, the normal-gravity flame height is independent of injection velocity, whereas the microgravity flame height continues to increase, although at a lower rate than in the laminar and transitional regimes. Other differences between the normal-gravity and microgravity flames arise in the jet shear-layer instability characteristics, extent of the transitional regime and blow-off limit characteristics.

Hegde, Uday↗

Corrosion of metal particle and metal evaporated tapes

Very high coercivity metal particle (MP) and metal evaporated (ME) tapes are being used in 8mm video and digital audio tape applications, and more recently in digital data recording applications. In view of the inherent susceptibility of such media to environmental corrosion, a number of recent studies have addressed their long term stability and archivability. These studies have used an accelerated corrosion test based either on elevated temperature-humidity or polluting gas atmospheres known as Battelle tests. A comparison of the Battelle test results performed at different laboratories reveals a large variation from one location to another, presumably due to incorrect replication of the Battelle condition. Furthermore, when the Battelle tests are performed on enclosed cartridges, it is quite possible that diffusion limits the penetration of the extremely low concentration polluting gaseous species to the inner layers of the tapes during the short time of the accelerated test, whereas in real life these diffusion limitations may not apply. To avoid this uncertainty, the corrosion behavior of commercial 8mm MP and ME tapes when cassettes without their external plastic cases were exposed to 50 deg C and 80 percent RH for 7.5 weeks is investigated.

Speliotis, Dennis E.↗

Recent Advances in Organic Cosmochemistry

The Astrochemistry Laboratory at NASA's Ames Research Center pursues a variety of activities, most of which center around the use of spectroscopy (ultraviolet to far-infrared) for the interpretation of astronomical and meteoritic data. One of our key activities is the study of the chemical and physical properties of cometary, interstellar, and planetary ice analogs and matrix-isolated molecules of astrophysical interest. As a result of these studies it is now known that a significant fraction of the carbon in the interstellar medium (ISM) is in reasonably complex forms, some of which are clearly of interest for exobiology. Examples of compounds known or suspected to be present in space include polycyclic aromatic hydrocarbons (PAHs), microdiamonds, an aliphatic-rich component found in the diffuse interstellar medium, and a variety of molecular species produced by the irradiation of mixed molecular ices in dense clouds. A number of the species produced by irradiation contain nitrogen and appear to offer an additional means of producing some of the amino acids found in meteorites. I will review these complex carbonaceous materials and discuss how they are connected with each other and the organic materials that ultimately ended up as part of our own Solar System. Specific points that will probably be covered include: (1) the composition of the ices in interstellar dense molecular clouds; (2) the more complex organic compounds produced when these ices are irradiated and/or warmed; (3) the detection of microdiamonds in space; (4) the discovery that aliphatic materials may constitute as much as 15% of all the carbon in the diffuse ISM, appears to be present everywhere in the galaxy, and yet seems to be present everywhere in the galaxy, and yet seems to be significantly concentrated towards the center of the galaxy.

Sandford, Scott A.↗

Laser-saturated fluorescence measurements in laminar sooting diffusion flames

The hydroxyl radical is known to be one of the most important intermediate species in the combustion processes. The hydroxyl radical has also been considered a dominant oxidizer of soot particles in flames. In this investigation the hydroxyl concentration profiles in sooting diffusion flames were measured by the laser-saturated fluorescence (LSF) method. The temperature distributions in the flames were measured by the two-line LSF technique and by thermocouple. In the sooting region the OH fluorescence was too weak to make accurate temperature measurements. The hydroxyl fluorescence profiles for all four flames presented herein show that the OH fluorescence intensities peaked near the flame front. The OH fluorescence intensity dropped sharply toward the dark region of the flame and continued declining to the sooting region. The OH fluorescence profiles also indicate that the OH fluorescence decreased with increasing height in the flames for all flames investigated. Varying the oxidizer composition resulted in a corresponding variation in the maximum OH concentration and the flame temperature. Furthermore, it appears that the maximum OH concentration for each flame increased with increasing flame temperature.

Wey, Changlie↗

The C4H radical and the diffuse interstellar bands. An ab initio study

An ab initio study of the low-lying electronic states of C4H has been presented where the species studied has a chi(2)sigma(+) ground state and two low lying pi states. Based on the vertical and adiabatic excitation energies between those states it is suggested that the 4428 A diffuse interstellar band is not carried by C4H. The application of the particle in a box model shows strong coincidences between the strong DIB's and predicted wavelengths of pi-pi transitions in C(2n)H series. Based on those coincidences, it is suggested the C(2n)H species as good candidates for carriers of diffuse interstellar bands.

Kolbuszewski, Marcin↗

Troposphere-stratosphere interactions in a one-dimensional model of Jovian photochemistry

The case of a chemically unreactive species flowing downward through the stratosphere and troposphere with a constant flux is presently treated by a one-dimensional Jovian atmosphere model which encompasses the coupling between a rapidly mixed troposphere and a stagnant stratosphere, so that the contrast between the peak stratosphere and tropopause concentrations is reflective of the variation between the lower stratosphere and upper troposphere eddy diffusion coefficients. Numerical simulations of unreactive CO and C2H6 species indicate that upper troposphere abundances may possess a substantial photochemical contribution. The implications of these modeling results for higher spectral resolution observations are noted.

Landry, Bridget↗

Sulfidation of 310 stainless steel at sulfur potentials encountered in coal conversion systems

The sulfidation of SAE 310 stainless steel was carried out in gas mixtures of hydrogen and hydrogen sulfide over a range of sulfur potentials anticipated in advanced coal gasification processes. The kinetics, composition, and morphology of sulfide scale formation were studied at a fixed temperature of 1,065 K over a range of sulfur potentials from .00015 Nm to the -2nd power to 900 Nm to the -2nd power. At all sulfur potentials investigated, the sulfide scales were found to be multilayered. The relative thickness of the individual layers as well as the composition was found to depend on the sulfur potential. The reaction was found to obey the parabolic rate law after an initial transient period. Considerably longer transient periods were found to be due to unsteady state conditions resulting from compositional variations in the spinel layer. The sulfur pressure dependence on the parabolic rate constant was found to best fit the equation K sub p equals const. (P sub S2) to the 1/nth power, where n equals 3.7. The growth of the outer layers was found to be primarily due to the diffusion of metal ions, iron being the predominant species. The inner layer growth was due to the dissociation of the primary product at the alloy scale interface and depended on the activity of chromium.

Rao, D. B.↗

Pulsed Excimer Laser Processing for Cost-Effective Solar Cells

Residual lattice damage by 5 keV ion implantation and surface flaws induced by wafer cleaning are proven to affect the V sub oc more adversely for laser annealed cells than conventional thermal diffusion. However, an alternative, molecular implantation of molecular species holds potential. The first experimental results are encouraging. The lack of a commercially available mass analyzed implantation with low energy, high fluence ions is constraining.

Wong, D.↗

Experimental study of lunar and SNC (Mars) magmas

The overall objectives of this research were to evaluate the role of C-O-S-Cl degassing processes in explaining vesiculation, oxidation state and fire-fountaining of lunar magmas by analysis of individual lunar glass spherules, and by experimental determination of equilibrium abundances and diffusion rates of C, S and Cl melt species in lunar glass compositions; and to determine possible primitive SNC magma compositions and the mineralogy of the mantle from which they were derived, and to evaluate P, T, XH2O etc. conditions at which they crystallize to form the SNC meteorites. After funding for one year, a project on the A15 volcanic green glass has been completed to the point of writing a first manuscript. Carbon-oxygen species C-O and CO2 are below detection limits (20 ppm) in these glasses, but there is up to 500 ppm S with concentrations both increasing and decreasing toward the spherule margins. Calculations and modeling indicate that C species could have been present in the volcanic gases, however. In a second project, experiments with low PH2O have resulted in refined estimates of the early intercumulus melt composition in the Chassigny meteorite which is generally accepted as a sample from Mars.

Rutherford, Malcolm J.↗

Extensional flow convecting a reactant undergoing a first order homogeneous reaction and diffusional mass transfer from a sphere at low to intermediate Peclet and Damkohler numbers

Forced convective diffusion-reaction is considered for viscous axisymmetric extensional convecting velocity in the neighborhood of a sphere. For Peclet numbers in the range 0.1 less than or equal to Pe less than or equal to 500 and for Damkohler numbers increasing with increasing Pe but in the overall range 0.02 less than or equal to Da less than or equal to 10, average and local Sherwood numbers have been computed. By introducing the eigenfunction expansion c(r, Theta) = Sum of c(n)(r)P(n)(cos Theta) into the forced convective diffusion equation for the concentration of a chemical species undergoing a first order homogeneous reaction and by using properties of the Legendre functions Pn(cos Theta), the variable coefficient PDE can be reduced to a system of N + 1 second order ODEs for the radial functions c(sub n)(r), n = 0, 1, 2,..., N. The adaptive grid algorithm of Pereyra and Lentini can be used to solve the corresponding 2(N + 1) first order differential equations as a two-point boundary value problem on 1 less than or equal to r less than or equal to r(sub infinity). Convergence of the expansion for a specific value of N can thus be established and provides 'spectral' behavior as well as the full concentration field c(r, Theta).

Shah, N. Y.↗

Dissociative recombination in planetary ionospheres

Ionization in planetary atmospheres can be produced by solar photoionization, photoelectron impact ionization, and, in auroral regions, by impact of precipitating particles. This ionization is lost mainly in dissociative recombination (DR) of molecular ions. Although atomic ions cannot undergo DR, they can be transformed locally through ion-molecule reactions into molecular ions, or they may be transported vertically or horizontally to regions of the atmosphere where such transformations are possible. Because DR reactions tend to be very exothermic, they can be an important source of kinetically or internally excited fragments. In interplanetary thermospheres, the neutral densities decrease exponentially with altitude. Below the homopause (or turbopause), the atmosphere is assumed to be throughly mixed by convection and/or turbulence. Above the homopause, diffusion is the major transport mechanism, and each species is distributed according to its mass, with the logarithmic derivative of the density with repect to altitude given approximately by -1/H, where H = kT/mg is the scale height. In this expression, T is the neutral temperature, g is the local acceleratiion of gravity, and m is the mass of the species. Thus lighter species become relatively more abundant, and heavier species less abundant, as the altitude increases. This variation of the neutral composition can lead to changes in the ion composition; furthermore, as the neutral densities decrease, dissociative recombination becomes more important relative to ion-neutral reactions as a loss mechanism for molecular ions.

Fox, J. L.↗

Freeze Tape Casting of Functionally Graded Porous Ceramics

Freeze tape casting is a means of making preforms of ceramic sheets that, upon subsequent completion of fabrication processing, can have anisotropic and/or functionally graded properties that notably include aligned and graded porosity. Freeze tape casting was developed to enable optimization of the microstructures of porous ceramic components for use as solid oxide electrodes in fuel cells: Through alignment and grading of pores, one can tailor surface areas and diffusion channels for flows of gas and liquid species involved in fuel-cell reactions. Freeze tape casting offers similar benefits for fabrication of optimally porous ceramics for use as catalysts, gas sensors, and filters.

Sofie, Stephen W.↗

Step-by-Step Simulation of Radiation of Radiation Chemistry Using Green Functions for Diffusion-Influenced Reactions

The irradiation of biological systems leads to the formation of radiolytic species such as H(raised dot), (raised dot)OH, H2, H2O2, e(sup -)(sub aq), etc.[1]. These species react with neighboring molecules, which result in damage in biological molecules such as DNA. Radiation chemistry is there for every important to understand the radiobiological consequences of radiation[2]. In this work, we discuss an approach based on the exact Green Functions for diffusion-influenced reactions which may be used to simulate radiation chemistry and eventually extended to study more complex systems, including DNA.

Plante, Ianik↗