Search NASA⌕ Search

SEARCH · Search NASA

Results for “spectrograms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Improving Chirped Fiber Bragg Grating Resolution for Position-Sensitive Sensors in Shock- and Detonation-Driven Experiments

Chirped fiber Bragg gratings (CFBGs) are robust diagnostic sensors that are widely used to track detonation-driven and shock wave propagation. CFBGs are inscribed with a linearly chirped periodic index of refraction changes that alter the Bragg wavelength along the length of the probe. The light return of each individual Bragg element is captured by a detector at a unique time to map the full reflected spectrum. The CFBG spectrum is measured with a dispersive Fourier transform of the reflected light that temporally stretches the spectrum to increase spatial resolution and make a one-to-one map of the wavelength on a time axis. Here, we propose an improvement of CFBG temporal resolution by incorporating two co-linear laser pulses with orthogonal polarization states and a 5 ns time offset. The two separate signals were split and tracked by two separate detectors. An oscilloscope captured good separation in the signals, and two separate spectrograms were generated and interleaved in the post-processing of the data. This novel technique doubled the CFBG temporal resolution and led to a doubled location resolution. As a proof-of-concept of this technique, the resolution improvement was compared between standard CFBG measurements and the two polarization states method on a position-sensitive CFBG sensor. CFBG resolution doubling will advance sensor capabilities and will have a direct impact on improving capture and analysis in dynamic, high-explosive experiments.

42 ENGINEERING↗

FLARE STARS—A FAVORABLE OBJECT FOR STUDYING MECHANISMS OF NONTHERMAL ASTROPHYSICAL PHENOMENA

We present a spectroscopic method for diagnosing a low-frequency electrostatic plasma turbulence (LEPT) in plasmas of flare stars. This method had been previously developed by one of us and successfully applied to diagnosing the LEPT in solar flares. In distinction to our previous applications of the method, here we use the latest advances in the theory of the Stark broadening of hydrogen spectral lines. By analyzing observed emission Balmer lines, we show that it is very likely that the LEPT was developed in several flares of AD Leo, as well as in one flare of EV Lac. We found the LEPT (though of different field strengths) both in the explosive/impulsive phase and at the phase of the maximum, as well as at the gradual phase of the stellar flares. While for solar flares our method allows diagnosing the LEPT only in the most powerful flares, for the flare stars it seems that the method allows revealing the LEPT practically in every flare. It should be important to obtain new and better spectrograms of stellar flares, allowing their analysis by the method outlined in the present paper. This can be the most favorable way to the detailed understanding of the nature of nonthermal astrophysical phenomena.

79 ASTRONOMY AND ASTROPHYSICS↗

THE BEAMING STRUCTURES OF JUPITER’S DECAMETRIC COMMON S-BURSTS OBSERVED FROM THE LWA1, NDA, AND URAN2 RADIO TELESCOPES

On 2015 February 21, simultaneous observations of Jupiter's decametric radio emission between 10 and 33 MHz were carried out using three powerful low-frequency radio telescopes: the Long Wavelength Array Station One in the USA, the Nançay Decameter Array in France, and the URAN2 telescope in Ukraine. We measured the lag times of short-bursts (S-bursts) for 105 minutes of data over effective baselines of up to 8460 km by using cross-correlation analysis of the spectrograms from each instrument. Of particular interest is the measurement of the beaming thickness of S-bursts, testing if either flashlight- or beacon-like beaming is emanating from Jupiter. We find that the lag times for all pairs drift slightly as time elapses, in agreement with expectations from the flashlight-like beaming model. This leads to a new constraint of the minimum beaming thickness of 2.″66. Also, we find that most of the analyzed data abound with S-bursts, whose occurrence probability peaks at 17–18 MHz.

79 ASTRONOMY AND ASTROPHYSICS↗

THE TWO CENTRAL STARS OF NGC 1514: CAN THEY ACTUALLY BE RELATED?

The central star of the planetary nebula NGC 1514 is among the visually brightest central stars in the sky ( V = 9.5). It has long been known to show a composite spectrum, consisting of an A-type star and a much hotter star responsible for the ionization of the surrounding nebula. These two stars have always been assumed to form a binary system. High-resolution spectrograms obtained with Espadons at the Canada–France–Hawaii Telescope on Maunakea have allowed us to measure good radial velocities for both stars: they differ by 13 ± 2 km s{sup −1}. The stellar velocities were unchanged after 500 days. We have also estimated the metallicity of the cooler star. Combining these data with other information available in the literature, we conclude that, unless all the published nebular radial velocities are systematically wrong, the cooler star is just a chance alignment, and the two stars are not orbiting each other. The cooler star cannot have played any role in the formation of NGC 1514.

79 ASTRONOMY AND ASTROPHYSICS↗

The Spectrum of SS 433 in the H and K Bands

SS 433 is an X-ray binary and the source of sub-relativistic, precessing, baryonic jets. We present high-resolution spectrograms of SS 433 in the infrared H and K bands. The spectrum is dominated by hydrogen and helium emission lines. The precession phase of the emission lines from the jet continues to be described by a constant period, P{sub jet}=162.375 days. The limit on any secularly changing period is | P-dot |≲10{sup −5}. The He i λ2.0587 μm line has complex and variable P-Cygni absorption features produced by an inhomogeneous wind with a maximum outflow velocity near 900 km s{sup −1}. The He ii emission lines in the spectrum also arise in this wind. The higher members of the hydrogen Brackett lines show a double-peaked profile with symmetric wings extending more than ±1500 km s{sup −1} from the line center. The lines display radial velocity variations in phase with the radial velocity variation expected of the compact star, and they show a distortion during disk eclipse that we interpret as a rotational distortion. We fit the line profiles with a model in which the emission comes from the surface of a symmetric, Keplerian accretion disk around the compact object. The outer edge of the disk has velocities that vary from 110 to 190 km s{sup −1}. These comparatively low velocities place an important constraint on the mass of the compact star: its mass must be less than 2.2 M{sub ⊙} and is probably less than 1.6 M{sub ⊙}.

79 ASTRONOMY AND ASTROPHYSICS↗

Observation of Magnetic Waves Excited by Newborn Interstellar Pickup He+ Observed by the Voyager 2 Spacecraft at 30 au

We report two observations of magnetic waves due to He{sup +} pickup ions observed by the Voyager 2 spacecraft in mid-1989 to demonstrate that such waves occur as far out as ∼30 au from the Sun. The observations are sufficiently far from planets, interplanetary shocks, and other possible sources of energetic particles to make newborn interstellar He{sup +} the only likely explanation for the source of the waves. Additionally, the low-frequency waves that might be expected for a variety of cometary pickup species are not seen. The events studied here were picked from a preliminary list of ∼300 events that were discovered based on polarization signatures in daily spectrograms of the magnetic field between 1977 and 1990. Analysis of those observations is ongoing. We present an analysis of these two observations using the same techniques we have employed for recently reported observations closer to the Sun.

79 ASTRONOMY AND ASTROPHYSICS↗

The Gravitational Wave Signal from Core-collapse Supernovae

We report on gravitational waves (GWs) from a set of 2D multigroup neutrino radiation hydrodynamic simulations of core-collapse supernovae (CCSNe). Our aim is to systematize the current knowledge about the post-bounce CCSN GW signal and recognize the templatable features that could be used by the ground-based laser interferometers. We demonstrate that, starting from ~400 ms after core bounce, the dominant GW signal represents the fundamental quadrupole (l = 2) oscillation mode (f-mode) of the proto–neutron star (PNS), which can be accurately reproduced by a linear perturbation analysis of the angle-averaged PNS profile. Before that, in the time interval between ~200 and ~400 ms after bounce, the dominant mode has two radial nodes and represents a g-mode. We associate the high-frequency noise in the GW spectrograms above the main signal with p-modes, while below the dominant frequency there is a region with very little power. The collection of models introduced here summarizes the dependence of the CCSN GW signal on the progenitor mass, equation of state, many-body corrections to the neutrino opacity, and rotation. Weak dependence of the dominant GW frequency on the progenitor mass motivates us to provide a simple fit for it as a function of time, which can be used as a prior when looking for CCSN candidates in the LIGO data.

79 ASTRONOMY AND ASTROPHYSICS↗

Design and implementation of a marine animal alert system to support Marine Renewable Energy

Power extracted from fast moving tidal currents has been identified as a potential commercial-scale source of renewable energy. Device developers and utilities are pursuing deployment of prototype tidal turbines to assess technology viability, site feasibility, and environmental interactions. Deployment of prototype turbines requires permits from a range of regulatory authorities. Ensuring the safety of marine animals, particularly those under protection of the Endangered Species Act of 1973 (ESA) and the Marine Mammal Protection Act of 1972 has emerged as a key regulatory challenge for initial MHK deployments. The greatest perceived risk to marine animals is from strike by the rotating blades of tidal turbines. Development of the marine mammal alert system (MAAS) was undertaken to support monitoring and mitigation requirements for tidal turbine deployments. The prototype system development focused on Southern Resident killer whales (SRKW), an endangered population of killer whales that frequents Puget Sound and is intermittently present in the part of the sound where deployment of prototype tidal turbines is being considered. Passive acoustics were selected as the primary means because of the vocal nature of these animals. The MAAS passive acoustic system consists of two-stage process involving the use of an energy detector and a spectrogram-based classifier to distinguish between SKRW’s calls and noise. A prototype consisting of two 2D symmetrical star arrays separated by 20 m center to center was built and evaluated in the waters of Sequim Bay using whale call playback.

killer whales↗

Advancing Industry 4.0: Multimodal Sensor Fusion for AI-Based Fault Detection in 3D Printing

Additive manufacturing, particularly fused deposition modeling, is transforming modern production by enabling rapid prototyping and complex part fabrication. However, its layer-by-layer process remains vulnerable to faults such as nozzle clogging, filament runout, and layer misalignment, which compromise print quality and reliability. Traditional inspection methods are costly, time-intensive, and often limited to post-process analysis, making them unsuitable for real-time intervention. In this current study, the authors developed a novel, low-cost, and portable faultdetection system that leverages multimodal sensor fusion and artificial intelligence for real-time monitoring in FDM-based 3D printing. The system integrates acoustic, vibration, and thermal sensing into a non-intrusive architecture, capturing complementary data streams that reflect both mechanical and process-related anomalies. Acoustic and thermal sensors operate in a fully contactless manner, while the vibration sensor requires minimal attachment such that it will not interfere with printer hardware, thereby preserving portability and ease of deployment. The multimodal signals are processed into spectrograms and time-frequency features, which are classified using convolutional neural networks for intelligent fault detection. The proposed system advances Industry 4.0 objectives by offering an affordable, scalable, and practical monitoring solution that improves faultdetection accuracy, reduces waste, and supports sustainable, adaptive manufacturing.

42 ENGINEERING↗