Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Structural stability of thin overhanging walls during material extrusion additive manufacturing of thermoset-based ink

Recent developments have enabled material extrusion additive manufacturing of thermoset-based composite inks on the large scale. In addition, printing out-of-plane components is of broad interest to the polymer material extrusion community. Here, we address some of the challenges associated with both large-scale and out-of-plane thermoset material extrusion additive manufacturing by studying the height at which thin overhanging walls collapse. Walls at a range of overhang angles were printed until they collapsed. An optical camera captured the profile of each wall throughout the print, allowing the collapse height to be identified and the geometric fidelity to the programmed angle to be evaluated. Using previously measured rheological properties, predictive models were generated to approximate the collapse height and profile of the deflected walls. First, an analytical model was created to predict the height at which the walls would yield. The analytical model assumes the walls exhibit a perfectly linear profile; however, experiments proved this assumption to be false. Therefore, a finite element simulation was developed to account for the elastic deflection that occurs during printing. The finite element simulation predicts both the yield height and the deflected profile after the deposition of each layer. For the properties of the thermoset ink used here, the yield height predicted by the analytical model and finite element simulation are virtually identical. These predictions match experimental data reasonably well, but minor errors are observed. Accounting for the fully plastic moment appears to explain the small mismatch between experimental data and predictions. Additionally, the finite element simulation provides an excellent prediction of the deflected profile before the wall begins to collapse. Finally, by demonstrating that the collapse height and deflected profile of thin overhanging walls can be predicted, this work illustrates how the soft viscoelastic properties of thermoset-based composite inks limit the scale of a key feature required to print some nonplanar components. It also provides a basis to tailor in-process curing systems to suppress deflection and collapse of thin overhanging walls.

36 MATERIALS SCIENCE↗

Low Temperature Propane Oxidation over Co 3 O 4 based Nano-array Catalysts. Ni Dopant Effect, Reaction Mechanism and Structural Stability

Low temperature propane oxidation has been achieved by Co 3 O 4 -based nano-array catalysts featuring low catalytic materials loading. The Ni doping into the Co 3 O 4 lattice has led to enhanced reaction kinetics at low temperature by promoting the surface lattice oxygen activity. In situ DRIFTS investigation in tandem with isotopic oxygen exchange reveals that the propane oxidation proceeds via Mars-van Krevelen mechanism where surface lattice oxygen acts as the active site whereas O 2 in the reaction feed does not directly participate in CO 2 formation. The Ni doping promotes the formation of less stable carbonates on the surface to facilitate the CO 2 desorption. The thermal stability of Ni doped Co 3 O 4 decreases with increased Ni concentration while catalytic activity increases. A balance between enhanced activity and compromised thermal stability shall be considered in the Ni doped Co 3 O 4 nano-array catalysts for low temperature hydrocarbon oxidation. This study provides useful and timely guidance for rational catalyst design toward low temperature catalytic oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Co-substitution at the Mn-site in YMnO{sub 3}: Structural stability and physical properties

Highlights: Black-Right-Pointing-Pointer Solid state synthesis of several series of hexagonal co-substituted YMn{sub 1-x}(M Prime ,M Double-Prime ){sub x}O{sub 3}. Black-Right-Pointing-Pointer Evidencing the critical parameters which govern the stabilization of the hexagonal phase. Black-Right-Pointing-Pointer Inducing a decrease of the antiferromagnetic ordering temperature by co-substitutions. -- Abstract: The YMnO{sub 3} oxide, crystallizing in the P6{sub 3}cm space group is one of the most studied multiferroic material. While these properties can be modified by substitutions at the Mn-site, the peculiar fivefold coordination appears to limit the M solubility range in YMn{sub 1-x}M{sub x}O{sub 3}. This motivated the preparation by solid state reaction of several series of co-substituted YMn{sub 1-x}(M Prime ,M Double-Prime ){sub x}O{sub 3}, which were studied using both powder X-ray diffraction and transmission electron microscopy. The cation pairs have been chosen for their ability to adopt a fivefold coordination similar to that of Mn{sup 3+} in YMnO{sub 3}, to keep a constant average trivalent oxidation state and to maintain an average cationic radius similar to that of Mn{sup 3+}. For YMn{sub 1-x}(Cu{sub 1/2}Ti{sub 1/2}){sub x}O{sub 3}, a complete solid solution is observed without cation ordering. For all other studied cation pairs, the solubility range is always reaching a minimum value of 25% for the Zn containing pairs (Zn{sub 2/3}V{sub 1/3} and Zn{sub 3/4}Mo{sub 1/4}), a maximum of 50% being reached for the Cu containing pairs (Cu{sub 2/3}V{sub 1/3}, Cu{sub 2/3}Nb{sub 1/3} and Cu{sub 3/4}W{sub 1/4}). Interestingly, the non-centrosymmetric P6{sub 3}cm space group is retained within the solubility range without generating cation ordering phenomena. These co-substitutions at the Mn{sup 3+} are found to induce a decrease of the antiferromagnetic ordering temperature, the T{sub N} variations being similar to the temperature decrease of the dielectric anomaly. Thus, these oxides are interesting candidates for the study of the multiferroic behavior of YMnO{sub 3} derivatives.

36 MATERIALS SCIENCE↗