Search NASA⌕ Search

SEARCH · Search NASA

Results for “structure changes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Fractal dimension analysis of weight-bearing bones of rats during skeletal unloading

Fractal analysis was used to quantify changes in trabecular bone induced through the use of a rat tail-suspension model to simulate microgravity-induced osteopenia. Fractal dimensions were estimated from digitized radiographs obtained from tail-suspended and ambulatory rats. Fifty 4-month-old male Sprague-Dawley rats were divided into groups of 24 ambulatory (control) and 26 suspended (test) animals. Rats of both groups were killed after periods of 1, 4, and 8 weeks. Femurs and tibiae were removed and radiographed with standard intraoral films and digitized using a flatbed scanner. Square regions of interest were cropped at proximal, middle, and distal areas of each bone. Fractal dimensions were estimated from slopes of regression lines fitted to circularly averaged plots of log power vs. log spatial frequency. The results showed that the computed fractal dimensions were significantly greater for images of trabecular bones from tail-suspended groups than for ambulatory groups (p < 0.01) at 1 week. Periods between 1 and 4 weeks likewise yielded significantly different estimates (p < 0.05), consistent with an increase in bone loss. In the tibiae, the proximal regions of the suspended group produced significantly greater fractal dimensions than other regions (p < 0.05), which suggests they were more susceptible to unloading. The data are consistent with other studies demonstrating osteopenia in microgravity environments and the regional response to skeletal unloading. Thus, fractal analysis could be a useful technique to evaluate the structural changes of bone.

Non-NASA Center↗

Simultaneous Multiwavelength Monitoring of 3C66A

The radio-selected BL Lac object 3C66A was the target of an intensive multiwavelength campaign from Sept. 2003 through Feb. 2004. It was monitored by the Whole Earth Blazar Telescope (WEBT) collaboration, in tandem with 20 X-ray monitoring observations by the Rossi X-Ray Timing Explorer (RXTE), VHE gamma-ray observations by STACEE and VERITAS, and long-term monitoring at radio frequencies. In addition. 9 observations using the VLBA are being carried out during the campaign and throughout the year 2004 to follow possible structural changes of the source. 21 pointings with RXTE during the period Sept. 15 - Dec. 27, 2003. All collected data have been fully analyzed, and first results have already been published at the 8th HEAD Meeting in New Orleans, LA, in Sept. 2004, and will also be presented at the 205th AAS Meeting in San Diego, CA, in Jan. 2005. A first Journal paper, to be submitted to the Astrophysical Journal, is currently in preparation, and we plan to have it ready for submission in January 2005. A gradual brightening of the source over the course of the campaign was observed at all optical frequencies, culminating in a very bright flare at the end of January 2004. Optical light curves indicate intraday microvariability on time scales down to about 1.3 hours. No significant color-magnitude correlation for the entire data set was evident, but there is a slight indication of a gradual spectral softening in the optical over the entire duration of multi-day outbursts (in both the rising and decaying phase). The X-ray spectrum is consistent with a power-law with a photon spectral index of approx. 2.1, indicating that the RXTE energy band might be located right at the intersection of the synchrotron and the high-energy emission components. No significant flux or spectral variability at X-ray energies was detected, though there seems to be a trend of very modest brightening in tandem with the optical flux. The first 4 VLBA epochs indicate a rather smooth jet with only very moderate internal structure. After decomposition in Gaussian components, evidence for superluminal motion (11.0+/-4.7/h c) was found in only one out of 6 jet components. The radial radio brightness profile suggests a magnetic field decay infinity/r and, thus, a predominantly perpendicular magnetic field orientation.

Boettcher, M.↗

Carbon and graphite research

Structural changes accompanying creep deformation of pyrolytic carbon and electron micrography and fractography of glassy carbons

ELECTRON MICROSCOPY↗

Supersonic jet noise suppression using coaxial flow interaction.

The scope of investigations conducted with coaxial interacting supersonic jet flows covers (1) acoustic measurements in both the far noise field and near noise field, (2) surveys of mean flow properties and fluctuating pressures, optical visualization of interacting jet flows, the associated flow and shock structure changes and the noise field, (3) the effects of different geometrical parameters of the coaxial nozzles, and (4) thrust measurements. It is shown that the flow interaction between two suitable controlled interacting coaxial supersonic axisymmetric jet flows results in substantial noise reduction based on equivalent thrust considerations. This flow interaction technique appears to be potentially an attractive approach for suppression of noise from supersonic jet exhausts.

Dosanjh, D. S.↗

Effects of spanwise rotation on the structure of two-dimensional fully developed turbulent channel flow.

Experiments on fully developed turbulent flow in a channel which is rotating at a steady rate about a spanwise axis are described. The Coriolis force components in the region of two-dimensional mean flow affect both local and global stability. Three stability-related phenomena were observed or inferred: (1) the reduction (increase) of the rate of wall-layer streak bursting in locally stabilized (destabilized) wall layers; (2) the total suppression of transition to turbulence in a stabilized layer; (3) the development of large-scale roll cells on the destabilized side of the channel by growth of a Taylor-Gortler vortex instability. Local effects of rotational stabilization, such as reduction of the turbulent stress in wall layers, can be related to the local Richardson number in a simple way. This paper not only investigates this effect, but also, by methods of flow visualization, exposes some of the underlying structure changes caused by rotation.-

Johnston, J. P.↗

Studies of the performance of W-Re type thermocouples.

The effect of exposure of bare-wire and BeO-insulated commercial W-Re thermocouple materials to high temperatures in gaseous environments was investigated. The temperature range of interest was primarily 2000 to 2400 K, and the investigations were confined to thermocouple wires of 0.25 mm diameter. Thermoelements were examined for metallurgical structural changes and chemical changes by conventional methods. In the temperature range of interest, grain growth was inhibited in the chemically doped W-3% Re alloy, and excellent room-temperature ductility was retained subsequent to the exposure. The compatibility of high purity (in excess of 99.8%), sintered BeO insulators with the thermoelements differed, depending upon whether the BeO-insulated thermoelement assemblies were self-heated electrically or heated in a furnace; in tests in argon environments, highly reliable performance occurred when the assemblies were heated in a furnace. BeO-insulated W-3% Re vs W-25% Re thermocouples, constructed with degassed and aged materials, exhibited drifts equivalent to about 3 mK/hr during 1000 hours of exposure at 2073 K in argon while in the presence of tantalum.

Burns, G. W.↗

Electrical heating tests of uranium dioxide external fuel configuration at emitter temperature of 1900 K

Testing of two fuel clad specimens for thermionic reactor application is described. The annular UO2 fuel was clad on both sides with tungsten; heat rejection was radially inward. The tests were intended to study inner clad stability, fuel redistribution, and fuel melting problems. The specimens were tested in a vacuum chamber using electron bombardment heating. Fuel structural changes were studied using periodic gammagraphs and posttest metallography. The first specimen test was terminated at 50 hours because of a braze failure. The second specimen was tested for 240 hours when an outer clad leak developed due to a tungsten-water reaction. The fuel developed numerous cracks on cooldown but the inner clad remained dimensionally stable. The fuel cover gas did not impede the rate of fuel redistribution. Posttest examination showed the fuel had not melted during operation.

Diianni, D. C.↗

Acoustic properties of organic acid mixtures in water

The variation of the rate of propagation of ultrasounds in organic acid mixtures in water points to structural changes caused by interactions that take place under conditions of thermal agitation, at different acid concentrations. At the same time, a difference is found in the changes in velocity as a function of the length of the carbon chain of the acids in the mixture as a result of their effect on the groups of water molecules associated by hydrogen bonds.

Macavei, I.↗

Redesigned rotor for a highly loaded, 1800 ft/sec tip speed compressor fan stage 1: Aerodynamic and mechanical design

A highly loaded, high tip-speed fan rotor was designed with multiple-circular-arc airfoil sections as a replacement for a marginally successful rotor which had precompression airfoil sections. The substitution of airfoil sections was the only aerodynamic change. Structural design of the redesigned rotor blade was guided by successful experience with the original blade. Calculated stress levels and stability parameters for the redesigned rotor are within limits demonstrated in tests of the original rotor.

Halle, J. E.↗

Mechanisms of deterioration of nutrients

Methods which produce freeze dried foods of improved quality were examined with emphasis on storage stability. Specific topics discussed include: microstructure of freeze dried systems, investigation of structural changes in freeze dried systems, artificial food matrices, osmotic preconcentration to yield improved quality freeze dried fruits, and storage stability of osmotically preconcentrated freeze dried fruits.

Karel, M.↗

The quiet sun in the extreme ultraviolet

Observations of the quiet sun with an XUV spectrometer during the Skylab mission are reported for the chromosphere, transition region, and corona. The changing structure of the network is examined over the temperature range from 10,000 to 1.5 million K, and the distribution of intensities in the cell interiors and the network are examined from the standpoint of creating characteristic models. Observations of traces of periodic oscillations at 300 s in the cells for temperatures not exceeding 20,000 K are reported together with the absence of any periodic contributions at higher temperatures or periodic effects at any height in the network elements. Frequent nonperiodic brightenings are observed, and their characteristics discussed. Observations of the increased thickness of the transition region in coronal holes, as well as other properties, are discussed in limited detail. Observations of the center-to-limb behavior of transition-region and coronal lines are used to construct coronal models, and the assumptions of spherical symmetry evaluated from the intensity data. The effects of spicules on the limb and disk data are discussed in relation to the observations.

Reeves, E. M.↗

Effects of high temperature and e-beam irradiation on the stability of refractory thin films

Refractory thin films of Al2O3, ZrO2, MgO, ThO2, and BN have been investigated in situ in an UHV transmission electron microscope. The electron transparent refractory films were prepared by electron-beam evaporation, anodization, RF sputtering, and thinning of bulk crystal materials. The study concentrates on monitoring the thermal and mechanical stability of the films, phase and structural changes, and electron irradiation effects as a function of film-preparation conditions. With increasing temperatures, five different crystallographic phases were observed for both anodized and electron-beam-evaporated alumina films. Zirconia films exhibited two phase transitions upon heating to 1200 C and electron-irradiation-induced crystallization of ZrO2 even at room temperature. MgO, ThO2, and BN films did not undergo any noticeable phase transformation but ruptured due to sintering below 1200 C.

Lee, E. H.↗

Internal friction and velocity measurements

The Q of a lunar basalt sample was measured under varying vacuum conditions, and it was found that even at pressures as low as 10 to the -7th to 10 to the -10th torr, substantial increases in Q with decreasing pressure are observed, while the resonant frequency increases only slightly. This suggests that only small amounts of volatiles are sufficient to increase the internal friction (lower the Q) dramatically. The technique of vibrating encapsulated samples in the torsional mode was used to measure Q of terrestrial rocks as a function of hydrostatic pressure under lunar vacuum conditions. Young's modulus measurements in the temperature range 25-600 C under a variety of conditions including high vacuum show no evidence of any irreversibility upon temperature cycling and no indication that the high Q-values obtained are associated with any permanent structure changes such as the formation of lossless 'welded' contacts.

Tittmann, B. R.↗