Search NASA⌕ Search

SEARCH · Search NASA

Results for “success”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Feeding from the sun—Successes and prospects in bioengineering photosynthesis for food security

There is an urgent need for increased crop productivity to reduce food insecurity and improve sustainability. Photosynthesis converts sunlight energy into carbohydrates, providing the source of nearly all of humanity’s food. Photosynthesis is a key target for improvement, owing to inherent inefficiencies in the biochemical process. Over the last decade of advancements in bioengineering, strategies to increase the efficiency of photosynthesis were tested with proven enhancements to crop yields in field trials. Simple strategies like increasing the content of photosynthetic proteins have reliably increased photosynthesis and productivity in crops, as have more complex strategies such as bypassing photorespiration. While insertion of carbon-concentrating mechanisms into C3 plants remains an engineering challenge, modeling suggests that achieving that would have the greatest gain for crop improvement. This review discusses the many successes in improving photosynthesis achieved over the past decade and quantifies the potential for future engineering targets to increase crop productivity.

Long, Stephen P. [University of Illinois, Urbana, ↗
DOE OSTI2022

Intra-annual variation in microclimatic conditions in relation to vegetation type and structure in two tropical dry forests undergoing secondary succession

Microclimate acts as a strong filter on species performance in restored and regenerating forests, particularly in seasonally dry tropical forests (SDTF). Yet few studies have measured microclimate patterns across succession in SDTF. Furthermore, although dynamic vegetation models simulate microclimate, evaluation of these simulated variables with field observations has been relatively uncommon. Here, we investigated the seasonal patterns of soil temperature and soil water in naturally regenerated and planted successional vegetation in SDTF in Costa Rica and Puerto Rico, using complementary approaches of intensive field observations and simulation modeling with the Ecosystem Demography model. We found that plots representing later successional stages were wetter on average, but only during the dry season. During the wet season, mean soil water did not differ across vegetation types, but open, early successional vegetation experienced more frequent extreme wet and dry conditions than older forest and plantations. Soil temperature tended to decline with forest structure, and later successional vegetation also experienced less extreme daily temperature fluctuations. Basal area and leaf area index were the best predictors of differences in soil water and temperature across plots. Model simulations were consistent with observations of wet season soil temperature and soil water, but the model failed to reproduce dry season soil moisture dynamics, suggesting that further work is needed to reduce model biases in microclimate variables. Collectively, our results imply that common assumptions about how microclimates influence successional processes in SDTF should be revisited.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Measuring Success: A Refined Methodology for Estimating Long-term Continuous Improvement

Successful resource management systems require current and detailed feedback on operational and corporate-level performance. As corporate accountability concerns intensify, the precision and reliability of these performance metrics have become crucial. Traditional savings estimation methods can be difficult to understand, particularly linear regression, and can provide varying results. This paper reviews common efficiency metrics and highlights underlying mathematical inconsistencies when estimating total and percent savings with current methods. A refined approach to calculating long-term utility savings is proposed that simplifies current methodologies utilizing ratios to define an adjusted baseline, allowing for consistent and fair aggregation of results across multiple scales from resources to corporate performance. A simplified example demonstrates how the proposed methodology improves upon existing methods, especially in intermediate years. This paper’s major contributions are the simplified approach for converting modeled utility usage into estimated savings and the consistent roll-up methodology enabling more comparable, aggregable, and actionable results across scales.

Price, Chris [ORNL] (ORCID:0000000202007906)↗
DOE OSTI2026

>24% screen printed Cu contacted n-TOPCon solar cells with successful implementation of LECO process

In this paper, we report the successful fabrication of >24.0 % efficiency n-TOPCon Si solar cells with screen-printed, fire-through Cu contact to n-TOPCon on the rear side and Ag contacted boron emitter on the front side by implementing optimized firing and LECO conditions. The highest efficiency (24.3%) Cu contacted n-TOPCon cell in this study showed excellent cell performance parameters with V oc >730 mV, J sc of 41.1 mA/cm 2 and FF of 80.8%, resulting in an absolute efficiency gap of 0.2% between Cu-contacted and fully Ag contacted n-TOPCon cells (24.5%). The mini-module fabricated with the Cu contacted n-TOPCon cell showed excellent reliability and durability of open-circuit voltage (V oc ), pseudo fill factor (pFF) and efficiency after prolonged damp-heat tests. Such high efficiency screen printed Cu contacted n-TOPCon cells provide unique opportunity to replace very expensive Ag contact on n-TOPCon with cheaper screen printable Cu metal pastes.

14 SOLAR ENERGY↗
DOE OSTI2026

Decorated Honeycomb Lattice and Successive Magnetic Transitions of the Delafossite Derivative K 4 Ni 5 Te 3 O 16

Here, we report the synthesis and characterization of the delafossite derivative K 4 Ni 5 Te 3 O 16 , which hosts a decorated honeycomb Ni 2+ lattice. Single-crystal X-ray diffraction, electron microscopy, and neutron diffraction establish a noncentrosymmetric Pmm2 crystal structure that combines regular honeycomb units with elongated motifs formed by Ni 2+ trimers along extended edges. Magnetic susceptibility reveals strong antiferromagnetic interactions, while heat capacity measurements identify two successive magnetic transitions at 30 and 12 K. Neutron diffraction shows that these transitions correspond to a progression from partial to full long-range magnetic order on distinct Ni sites, reflecting competition among the various exchange interactions. The resulting magnetic point group, mm2.1′, inherits the lattice polarity and permits high-order magnetoelectric coupling. Consistent with this symmetry, a quadratic magnetic-field-induced polarization is experimentally observed below the magnetic ordering temperature, likely arising from exchange-driven magnetostriction coupled to the polar lattice. These results establish K 4 Ni 5 Te 3 O 16 as an interesting platform for engineering B-site ordering in delafossite derivatives to realize complex quantum magnetism and functional responses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Adsorption of ethylenediamine on Cu surfaces: attributes of a successful capping molecule using first-principles calculations

The shape-controlled synthesis of Cu nanocrystals can benefit a wide range of applications, though challenges exist in achieving high and selective yields to a particular shape. Capping agents play a pivotal role in controlling shape, but their exact role remains ambiguous. In this study, the adsorption of ethylenediamine (EDA) on Cu(100) and Cu(111) was investigated with quantum density functional theory (DFT) to reveal the complex roles of EDA in promoting penta-twinned Cu nanowire growth. We find EDA has stronger binding on Cu(100) than on Cu(111), which agrees the general expectation that penta-twinned Cu nanowires express facets with stronger capping-molecule binding. Despite this stronger binding, ab initio thermodynamics reveals the surface energy of EDA-covered Cu(111) is lower than that EDA-covered Cu(100) at all solution-phase EDA chemical potentials, so there is no thermodynamic driving force for penta-twinned nanowires. We also investigated the capability of EDA to protect Cu surfaces from oxidation in water by quantifying energy barriers for a water molecule to diffuse through EDA layers on Cu(100) and Cu(111). The energy barrier on Cu(100) is significantly lower, which supports observations of faster oxidation of Cu(100) in electrochemical experiments. Thus, we elucidate another possible function of a capping agent – to enable selective oxidation of crystal facets. This finding adds to the general understanding of successful attributes of capping agents for shape-selective nanocrystal growth.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Towards an IPv6-only WLCG: More successes in reducing IPv4

The Worldwide Large Hadron Collider Computing Grid (WLCG) community’s deployment of dual-stack IPv6/IPv4 on its worldwide storage infrastructure has been very successful. Dual-stack is not, however, a viable longterm solution; the HEPiX IPv6 Working Group has focused on studying where and why IPv4 is still being used, and how to flip such traffic to IPv6. The agreed end goal is to turn IPv4 off and run IPv6-only over the wide-area network to simplify both operations and security management.This paper reports our work since the CHEP2023 conference. Firstly, we present our campaign to deploy IPv6 on CPU services and Worker Nodes, with a deadline of end of June 2024. Then, the WLCG Data Challenge (DC24) performed in February 2024 was an excellent opportunity to observe the percentage of data transfers carried by IPv6. We observed the predominance of IPv6 in data transfers during DC24 and were able to understand yet more reasons for the use of IPv4 and areas for remedial action.The paper ends with the working group’s plans for moving WLCG to “IPv6- only”. One aspect of this is the possible automated use of IPv6-only clients configured with a customer-side translator, or CLAT, together with a deployment of NAT64 using what is often known as “IPv6-Mostly”, enabling IPv6-only sites to connect to non-WLCG IPv4-only services.

Attebury, Garhan [U. Nebraska, Lincoln]↗
DOE OSTI2020

Physics successfully implements Lagrange multiplier optimization

Optimization is a major part of human effort. While being mathematical, optimization is also built into physics. For example, physics has the Principle of Least Action; the Principle of Minimum Power Dissipation, also called Minimum Entropy Generation; and the Variational Principle. Physics also has Physical Annealing, which, of course, preceded computational Simulated Annealing. Physics has the Adiabatic Principle, which, in its quantum form, is called Quantum Annealing. Thus, physical machines can solve the mathematical problem of optimization, including constraints. Binary constraints can be built into the physical optimization. In that case, the machines are digital in the same sense that a flip–flop is digital. A wide variety of machines have had recent success at optimizing the Ising magnetic energy. We demonstrate in this paper that almost all those machines perform optimization according to the Principle of Minimum Power Dissipation as put forth by Onsager. Further, we show that this optimization is in fact equivalent to Lagrange multiplier optimization for constrained problems. We find that the physical gain coefficients that drive those systems actually play the role of the corresponding Lagrange multipliers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Electronic signatures of successive itinerant, antiferromagnetic transitions in hexagonal La 2 Ni 7

We use high-resolution angle-resolved photoemission spectroscopy (ARPES) and density functional theory (DFT) calculations to study the electronic and magnetic properties of La 2 Ni 7 , an itinerant magnetic system with a series of three magnetic transition temperatures upon cooling, which end in a small moment antiferromagnetic (smAFM) ground state. Our APRES data reveal several electron and hole pockets that have hexagonal symmetry near the Γ point. We observe significant reconstruction of the band structure upon successive magnetic transitions at T 1 ~ 61 K, T 2 ~ 57 K and T 3 ~ 42 K. Several features observed in ARPES data were reasonably well reproduced by DFT calculations, while others were not. In particular, the flat band near E f predicted by DFT in AFM state, was seemingly absent in ARPES data. Our results detail the effects of magnetic ordering on the electronic structure in a Ni-based small moment antiferromagnet and highlight challenges of current computational methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Successful νp -process in neutrino-driven outflows in core-collapse supernovae

The origin of the solar system abundances of several proton-rich isotopes, especially 92,94 Mo and 96,98 Ru, has been an enduring mystery in nuclear astrophysics. An attractive proposal to solve this problem is the νp-process, which can operate in neutrino-driven outflows in a core-collapse supernova after the shock is launched. Years of detailed studies, however, have cast doubt over the ability of this process to generate sufficiently high absolute and relative amounts of various p-nuclei. The νp-process is also thought to be excluded by arguments based on the long-lived radionuclide 92 Nb. Here, we present explicit calculations, in which both the abundance ratios and the absolute yields of the p-nuclei up to A ≲ 105 are successfully reproduced, even when using the modern (medium enhanced) triple-α reaction rates. The process is also shown to produce the necessary amounts of 92 Nb. The models are characterized by subsonic outflows and by the protoneutron star masses in the ≳ 1.7 M ⊙ range. In conclusion, this suggests that the Mo and Ru p-nuclides observed in the Solar System were made in CCSN explosions characterized by an extended accretion stage.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Experimental confirmation of efficient island divertor operation and successful neoclassical transport optimization in Wendelstein 7-X

We present recent highlights from the most recent operation phases of Wendelstein 7-X, the most advanced stellarator in the world. Stable detachment with good particle exhaust, low impurity content, and energy confinement times exceeding 100 ms, have been maintained for tens of seconds. Pellet fueling allows for plasma phases with reduced ion-temperature-gradient turbulence, and during such phases, the overall confinement is so good (energy confinement times often exceeding 200 ms) that the attained density and temperature profiles would not have been possible in less optimized devices, since they would have had neoclassical transport losses exceeding the heating applied in W7-X. This provides proof that the reduction of neoclassical transport through magnetic field optimization is successful. W7-X plasmas generally show good impurity screening and high plasma purity, but there is evidence of longer impurity confinement times during turbulence-suppressed phases.

neoclassical optimization↗
DOE OSTI2024

Successful prediction of tokamak transport in the L-mode regime

A long standing shortfall in the predicted L-mode edge energy transport by reduced quasi-linear models of gyrokinetic turbulent transport has been resolved. The improved model TGLF-SAT2 has higher fidelity to gyrokinetic simulations of the electron-scale contribution to the electron energy transport and the ion-scale flux surface shape dependence of energy transport. The success of TGLF-SAT2 in predicting the L-mode and Ohmic edge profiles is critical to whole pulse simulation and opens the door to prediction of the H-mode power threshold.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Genomic insights into local adaptation and migration success in reintroduced Coho Salmon of the Wenatchee River basin

ABSTRACT Objective Reintroduction of salmonids into regions where they have been extirpated is a common conservation strategy that is often implemented through natural recolonization, translocation of natural populations, or hatchery-based programs. Locally adapting to specific environmental conditions is critical for long-term population viability, particularly for species like Coho Salmon Oncorhynchus kisutch, which face diverse selective pressures during their migration. This study focused on the mid-Columbia River Coho Salmon reintroduction program managed by Yakama Nation Fisheries, which has successfully reintroduced Coho Salmon into the Wenatchee and Methow River basins, Washington. Notably, these populations have adapted to the longer migration route than those in the founding stock, with selection favoring individuals with an earlier arrival time and that can navigate a 15-km, high-gradient canyon to reach optimal spawning grounds. The objectives of this study were to investigate whether specific genomic regions are under selection for traits associated with return location and timing in Coho Salmon. Methods Low-coverage whole-genome resequencing data were used to screen for genomic regions associated with the phenotypes of interest. Results A weak polygenic signal in female Coho Salmon was found to be associated with return group, with a subset of candidate adaptive regions occurring across eight chromosomes. Conclusions These findings provide insights into the genomic mechanisms underlying local adaptation in reintroduced salmon populations and inform broodstock selection strategies aimed at promoting natural production and long-term population sustainability.

Horn, Rebekah L.↗
DOE OSTI2020

Success and breakdown of the T-matrix approximation for phonon-disorder scattering

Here, we examine the validity of the widely used T-matrix approximation for treating phonon-disorder scattering by implementing an unfolding algorithm that allows simulation of disorder up to tens of millions of atoms. The T-matrix approximation breaks down for low-energy flexure phonons that play an important role in thermal transport in two-dimensional materials. Furthermore, insights are developed into the success of the T-matrix approximation in describing maximally mass disordered systems. To achieve this, the phonon unfolding formalism is generalized to describe mass disorder and strongly nonperturbative features of the spectrum are connected to the Boltzmann quasiparticle picture.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Successive magnetic orderings in the Ising spin chain magnet DyNi 5 Ge 3

In this report, we investigated a new rare-earth-based one-dimensional Ising spin chain magnet DyNi 5 Ge 3 by means of magnetization, specific heat, and powder neutron diffraction measurements. Due to the crystalline electrical field splitting, the magnetic Dy ions share an Ising-like ground doublet state. Owning to the local point symmetry, these Ising moments form into two canted magnetic sublattices, which were further confirmed by the angle-dependent magnetization measurement. In zero fields, two successive antiferromagnetic phase transitions were found at temperatures T N1 =6K and T N2 =5K, respectively. Only part of the moments are statically ordered in this intermediate state between T N1 and T N2 . Powder neutron diffraction experiments at different temperatures were performed as well. Further, an incommensurate magnetic propagation vector of k m =(0.5,0.4,0.5) was identified. The refined spin configurations through the irreducible representation analysis confirmed that these Ising spins are canted in the crystal ab plane.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Preparing for successful protein crystallization experiments

Crystal-based structural methods, including X-ray crystallography, are frequently utilized for the determination of high-resolution structures of biomolecules. All crystal-based diffraction methods first require the preparation of biomolecular crystals, and careful sample preparation for crystallization experiments can increase the frequency of success. In this article, strategies to optimize factors that can impact crystallization are presented, from which buffers and reducing agents are most favorable to which crystallization techniques could be used.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Pathways and Insights from Community Solar: A Guide to Community Energy Storage Success

Community energy assets bring the benefits of renewables to all energy system stakeholders, not just those with sufficient capital, land ownership, and resources. As the price of energy storage continues to decline and energy equity and justice principles are incorporated into policies and planning activities, Community Energy Storage (CES) is poised to follow in the footsteps of Community Solar’s (CS) success. Though CES is in its early stages and faces many unique challenges, it is an invaluable tool on the pathway to decarbonization, with the potential to increase renewable access, energy affordability, resilience, energy independence, wealth creation, and community empowerment. This paper provides a brief review of the history of CS, comparing the market and regulatory advances of CS to the current state of CES. The lessons learned from the rise of CS are then adapted to support those working to increase CES adoption in pursuit of a more equitable and sustainable energy system for all.

community energy planning, community solar, commun↗
DOE OSTI2025

Composition, Growth, Succession, and Function in the Cladophora Microbiome: Insights From Quantitative Stable Isotope Probing and NanoSIMS Imaging

The branching green macroalga Cladophora glomerata and its epiphytic microbiome dominate summer biomass in the Eel River, a Northern California river under Mediterranean (summer drought, winter rain) seasonality. Green Cladophora streamers proliferate in early summer, then change to yellow and then red-brown as epiphyte loads increase. Here, we characterised successional changes in epiphytic bacteria on Cladophora, examining both community composition and growth rates, using quantitative Stable Isotope Probing (qSIP) and 16S rRNA gene amplicon sequencing. The number of bacterial taxa increased with succession while growth rates peaked in the middle stage. NanoSIMS imaging confirmed high sulphur (S) concentrations in Cladophora cell walls relative to surrounding biomass, coinciding with a bloom of sulphur bacteria (bacteria that reduce or oxidise sulphur/sulphates). In general, relative abundances and growth rates were independent, indicating that either metric alone is insufficient for understanding how taxonomy and functional groups affect ecosystem processes. For instance, the relative abundance of nitrogen fixers peaked in the late summer when their relative growth rates were slowest. Such patterns may be driven by space competition limiting growth. Together, changes in abundance and relative growth rates suggest different limiting factors for different functional groups in the Cladophora microbiome at multiple successional stages.

Biological and medical sciences↗