Search NASA⌕ Search

SEARCH · Search NASA

Results for “synergistical optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Development of NDE/NDT Tools for High-Volume & High-Speed Inspection of CFRP Structures in Automotive Manufacturing

Main advantages of the air-coupled ultrasound testing (ACUT) and electromagnetic testing (EMT) techniques for NDE of CFRP composites were non-contact sensing, scalability for high-speed inspection, cost-effectiveness, and non-hazardous operation. Despite these advantages, no systems that would satisfy the project requirements were commercially available. Hence, one of the major efforts of the Michigan State University (MSU) team at the initial stage of the project was to close this technological gap by developing, optimizing, and validating array sensors that would provide sufficient sensitivity, spatial coverage, and resolution for robust defect detection. Optimization of the ACUT and EMT sensor designs was performed using experimentally validated finite element models. Initial experiments using array probes were conducted on relatively flat CFRP samples. In parallel, the MSU team designed and assembled a portable platform with two robotic arms. The robots were equipped with newly designed sensors that enabled high-speed NDE of curved CFRP parts. Presently, the developed robotic platform can be used as a demo/template NDE system, which is easily adaptable to manufacturing environments and in-line NDE. The ACUT NDE system developed by the MSU team used a high-power 4-channel pulser receiver for parallel data acquisition. The array probes were designed by stacking commercially available ACUT transducers, which operated in the frequency range between 100 kHz and 500 kHz. MSU optimized the excitation procedure and developed wave focusing cones so as to reduce the crosstalk between the transducers and to provide higher pulse repletion frequency (PRF). The through-transmission (TT) and single-side access (SSA) inspection modes were successfully implemented. In the TT-ACUT, structural defects in CFRP were detected by passing ultrasonic waves through the test part. Hence, the ACUT transmitters and receivers needed to be placed on the opposite sides of the test part. In the SSA-ACUT, guided waves (GW) were excited in the test part using the transmitters and were sensed by the receivers from the same side. Multi-channel TT-ACUT and SSA-ACUT provided high-speed NDE, and were successfully validated on CFRP test samples with interlaminar delaminations and other embedded defects The EM techniques developed by the MSU team included: 1) eddy current testing (ECT), 2) capacitive imaging (CI) and hybrid dual-mode imaging. In ECT, structural damage was detected in CFRP using coils sensor arrays. In ECT, the excitation magnetic field is generated by passing an alternating current through a coil, which is placed above the test sample. The excitation field penetrates the conductive sample and induces the eddy currents in its transect. In turn, the eddy currents generate the reaction field, which affects the total field sensed by a coil. Hence, the presence of structural flaws will alter the eddy current flow and the picked-up signal. ECT is mostly sensitive to local changes of the electric conductivity of the test sample, and CFRPs are mostly conductive in the direction of carbon fibers. Hence, ECT was well suited for the detection of fiber damage/fiber irregularities. The MSU team developed printed circuit boards (PCB) with coil sensor arrays optimized for NDE of CFRP. Unlike most commercial probes designed for ECT of metallic structures, the MSU array probes were designed for operation in [1-10] MHz frequency range, which was optimal for low-conductive CFRP. Multiple sensing topologies (coil groups excitation/sensing arrangements) were implemented and successfully validated. Capacitive Imaging (CI) technique developed by MSU was complementary to ECT. In contrast to ECT, which was sensitive to local changes of the electrical conductivity, the CI was sensitive to local changes of the dielectric constant. Therefore, CI could provide information about matrix damage/matrix irregularities in CFRP. The MSU CI sensor arrays were made of multiple circular or rectangular open-plate capacitors printed on PCB. Sensors of this type are not commercially available. In addition to ECT and CI, the MSU team developed a hybrid (dual-mode) inductive/capacitive measurement technique that synergistically combined the benefits of inductive and capacitive sensing for rapid NDE of fiber reinforced polymer (FRP) composite structures. Fiber damage and fiber irregularities in FRPs were detected by configuring hybrid sensors as coil sensors. Similarly, matrix damage, matrix irregularities and interlaminar delaminations were detected by configuring hybrid sensors as capacitive sensors. ECT and CI were performed sequentially by means of electronic switching. Hence, eliminating the need for mounting two separate sensor arrays on the probe. Portable robotic platform was developed by MSU for multi-technique high-speed NDE of CFRP test parts. The platform had two 6-axis robots, which enabled inspection of curved parts in approximately a 6×6×6 ft 3 active scan area. On the software side, the MSU team integrated scripts for NDE hardware control with scripts for robot motion control. MSU also implemented automated path planning for the robots, reconstruction of part’s surfaces via stereovision, 3D rendering of inspection data, and image processing algorithms for enhanced defect detection. Automotive composite parts manufactured by Plasan Composites from Phase I were used to validate the ACUT and EMT techniques on representative testbeds. Among those parts were three X-braces for a Dodge Viper, one composite calibration plaque with known defects at known locations, and four other test sections, including sections from a front splitter, a corner section from a composite hood, and a high-pressure RTM panel made using non crimp fabric. Other test samples included CFRP and GFRP calibration plates with fiber/matrix defects fabricated at MSU/CVRC.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Distinctive features of structural evolution and thermodynamic response in wide-bandgap semiconductors driven by intense electronic excitation

Radiation-tolerant material selection requires balancing lattice rigidity, defect dynamics, and electronic stability, as shown by covalent SiC outperforming ionic Ga 2 O 3 and GaN under extreme environments. Responding to intense electronic excitation, irradiation-driven phase segregation (β → δ/κ in Ga 2 O 3 ) and core–shell track (disordered structure in GaN), accompanied by elemental redistribution, contrastingly, exceptional radiation tolerance manifested by comparatively minimal lattice distortion (0.17 % strain variation) was demonstrated in SiC. These differential responses are primarily attributed to two fundamental mechanisms: (i) thermodynamic driving forces governing defect migration and phase separation, and (ii) the synergistic effects of robust covalent bonding composition coupled with efficient defect recombination processes. Here, the stronger electron–phonon (e-ph) coupling in Ga 2 O 3 (4.34 × 1018 W m −3 K −1 ) and GaN (3.55 × 10 18 W m −3 K −1 ) enhances lattice energy deposition, triggering thermal spikes (ΔT ≫ T m ) and structural transition behaviors, whereas weaker e-ph coupling in SiC (3.69 × 10 18 W m −3 K −1 ), relatively high thermodynamic parameters and efficient energy dissipation suppress thermal spikes to maintaining lattice integrity. The photoresponse degradation driven by enhanced radiative recombination is dominant in N-doped SiC, while V-doped systems achieve defect-mediated photoconduction optimization characterized by abrupt current transitions, matching fluorescence yield evolutions, and directly connecting defect engineering to optoelectronic performance.

Intense electronic excitation↗
DOE OSTI2024

Proof-of-concept studies with a computationally designed M pro inhibitor as a synergistic combination regimen alternative to Paxlovid

As the SARS-CoV-2 virus continues to spread and mutate, it remains important to focus not only on preventing spread through vaccination but also on treating infection with direct-acting antivirals (DAA). The approval of Paxlovid, a SARS-CoV-2 main protease (M pro ) DAA, has been significant for treatment of patients. A limitation of this DAA, however, is that the antiviral component, nirmatrelvir, is rapidly metabolized and requires inclusion of a CYP450 3A4 metabolic inhibitor, ritonavir, to boost levels of the active drug. Serious drug–drug interactions can occur with Paxlovid for patients who are also taking other medications metabolized by CYP4503A4, particularly transplant or otherwise immunocompromised patients who are most at risk for SARS-CoV-2 infection and the development of severe symptoms. Developing an alternative antiviral with improved pharmacological properties is critical for treatment of these patients. By using a computational and structure-guided approach, we were able to optimize a 100 to 250 μM screening hit to a potent nanomolar inhibitor and lead compound, Mpro61. In this study, we further evaluate Mpro61 as a lead compound, starting with examination of its mode of binding to SARS-CoV-2 M pro . In vitro pharmacological profiling established a lack of off-target effects, particularly CYP450 3A4 inhibition, as well as potential for synergy with the currently approved alternate antiviral, molnupiravir. Development and subsequent testing of a capsule formulation for oral dosing of Mpro61 in B6-K18-hACE2 mice demonstrated favorable pharmacological properties, efficacy, and synergy with molnupiravir, and complete recovery from subsequent challenge by SARS-CoV-2, establishing Mpro61 as a promising potential preclinical candidate.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Finch: Toxicity Dose Response Curve Prediction of Chemical Compounds and Mixtures

A paradigm shift in chemical risk assessment is emphasizing mixture testing over single compound analysis, eliminating animal testing, and adopting advanced modeling approaches to understand mixture activity profiles. However, existing computational models largely focus on single chemicals, with few effective solutions for modeling complex mixtures that account for synergistic or antagonistic effects and multiple Modes of Action (MoA). Conventional methods like concentration addition (CA) and independent action (IA) are insufficient for this task as they are designed for simplistic interactions and struggle to account for the dynamic and multifaceted nature of chemical mixtures, such as overlapping MoA and non-linear interactions. Finch offers a novel approach utilizing deep learning (DL) embeddings and multi-task quantitative structure-activity relationship (QSAR) models to improve chemical exposure prediction. By leveraging molecular descriptors, physiochemical properties, and large language model (LLM) embeddings from SMILES inputs, Finch preserves critical information in a latent space thereby enhancing predictive accuracy. The multi-task learning aspect of Finch is highly advantageous, as it simultaneously optimizes multiple loss functions, leveraging all available data across tasks to develop generalized representations that effectively capture complex ingredient interactions within mixtures.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Combined Techno-Economic Analysis and Life Cycle Assessment of an Integrated Direct Air Capture System with Advanced Algal Biofuel Production

The continuous increase in carbon dioxide (CO2) concentration in the atmosphere since the First Industrial Revolution correlates convincingly with the ongoing rise of the Earth's global average temperature contributing to climate change. As a response, carbon capture and sequestration (CCS) technologies are being implemented to mitigate anthropogenic CO2 emissions by capturing CO2 from high emitting point sources, such as power plants, refineries, and cement factories, and subsequently buried in geological formations underground for long term storage. Recently direct air capture (DAC) has emerged as a promising alternative technology that captures CO2 directly from the atmosphere for use or sequestration. This study investigates the potential synergistic benefits of integrating a solid amine-based DAC system with advanced algal biofuel production in photobioreactors (PBRs). DAC utilization allows the removal of atmospheric CO2 while also decoupling algae production facilities from anthropogenic point CO2 sources and avoiding the cost and logistics challenges of transporting CO2 long distances to remote facilities. Techno-economic analysis and life cycle assessment are performed to assess the economic and environmental benefits of heat and mass integration between the DAC and the PBR for biofuel production. The DAC-PBR system integration also considers on-site flue gas handling options, DAC capital utilization, the tradeoff between centralization or decentralization of key unit operations, and the PBR array. This presentation will discuss how optimizing DAC-PBR process integration can enhance the algal biofuel's economic and environmental sustainability and the prospect of DAC enabling the circular carbon economy.

algal biofuel production↗
DOE OSTI2026

Synergistic cellulase–xylanase formulations for enhanced dewatering and fiber bonding toward energy-efficient and sustainable paper and packaging production

A mechanistic understanding of the synergistic effects of enzymes on cellulosic fibers dewatering and fiber bonding is essential for advancing energy-efficiency and lightweight production of paper and packaging materials. This study investigates the impact of varying cellulase and xylanase formulations on equilibrium moisture content (EMC) after pressing and tensile strength of cellulosic fiber webs using a factorial experimental design. Nine custom enzyme formulations were evaluated at controlled dosages ranging from ∼20 to 76 FPU/mL cellulase and ∼500–1130 IU/mL xylanase. Response surface modeling revealed a significant synergy, particularly at 20–40 FPU/mL cellulase combined with ≥ 1000 IU/mL xylanase. Under these conditions, EMC decreased by up to 3.6% compared with the untreated refined control, while tensile index gains of up to 16% were statistically significant for optimized blends (p < 0.05). The interaction between cellulase and xylanase was also significant for the tensile response (p = 0.010). Protein efficiency analysis showed that optimized formulations containing 30–40% less protein outperformed the commercial benchmark. The nonlinear synergy between cellulase and xylanase is attributed to their complementary substrate specificities. Endoglucanase- and β‑glucosidase‑rich cellulases hydrolyze internal β‑1,4‑glycosidic bonds in amorphous cellulose, loosening fiber walls and increasing flexibility, while xylanases target hemicellulose, primarily xylan-rich domains, enhancing porosity and improve cellulase accessibility. Tailoring enzyme formulations at low loadings overcomes traditional trade-offs between strength and dewatering, enabling cost-effective, energy-efficient, low-carbon solutions for sustainable packaging and hygiene products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Heterovalent Substitution of K 2 SrP 2 O 7 :Cr 3+ to Achieve Anti-Thermal-Quenching Broadband Near-Infrared Luminescence

Broadband near-infrared (NIR) light sources based on phosphor-converted light-emitting diodes are highly desirable for biochemical analysis and medical diagnosis applications. However, thermal quenching remains a demanding challenge for developing efficient NIR phosphors. Herein, we report the enhancement of both quantum efficiency and thermal stability in Cr 3+ -activated K 2 SrP 2 O 7 phosphors through a heterovalent substitution strategy by replacing Sr 2+ with Al 3+ in K 2 Sr 1–x Al x P 2 O 7 (0.05 ≤ x ≤ 0.2) to obtain optimized broadband NIR emission. Structural modulation via Al 3+ substitution leads to the optimized composition, K 2 Sr 0.88 Al 0.1 P 2 O 7 :0.02Cr 3+ , which emits across a broad NIR range of 650–1100 nm peaking at 807 nm with a full width at half-maximum of ∼130 nm under 448 nm excitation. Remarkably, its emission intensity at 150 °C remains 120% of the initial value at room temperature, demonstrating a rare antithermal-quenching behavior. Temperature-dependent XRD studies further reveal that Al 3+ substitution effectively suppresses lattice expansion at elevated temperatures, indicating enhanced lattice stability under thermal excitation. Detailed structural and spectral analyses show that the substitution enhances local site symmetry, reduces electron–phonon coupling, increases thermally induced absorption probability, and fortifies energetic barriers against nonradiative transitions. These synergistic effects collectively endow this NIR phosphor with a superior thermal stability. Furthermore, NIR light-emitting diodes fabricated with this phosphor exhibit strong potential for applications in information identification, nondestructive detection, and night vision technologies. This study demonstrates a local structure engineering strategy for designing thermally robust Cr 3+ -activated NIR phosphors, offering valuable insights into material discovery and NIR spectroscopy device development.

Cr3+↗
DOE OSTI2022

Advances and perspectives on mass transfer and enzymatic hydrolysis in the enzyme-mediated lignocellulosic biorefinery: A review

We report enzymatic hydrolysis is a critical process for the cellulase-mediated lignocellulosic biorefinery to produce sugar syrups that can be converted into a whole range of biofuels and biochemicals. Such a process operating at high-solid loadings (i.e., scarcely any free water or roughly ≥ 15% solids, w/w) is considered more economically feasible, as it can generate a high sugar concentration at low operation and capital costs. However, this approach remains restricted and incurs “high-solid effects”, ultimately causing the lower hydrolysis yields with increasing solid loadings. The lack of available water leads to a highly viscous system with impaired mixing that exhibits strong transfer resistance and reaction limitation imposed on enzyme action. Evidently, high-solid enzymatic hydrolysis involves multi-scale mass transfer and multi-phase enzyme reaction, and thus requires a synergistic perspective of transfer and biotransformation to assess the interactions among water, biomass components, and cellulase enzymes. Porous particle characteristics of biomass and its interface properties determine the water form and distribution state surrounding the particles, which are summarized in this review aiming to identify the water-driven multi-scale/multi-phase bioprocesses. Further aided by the cognition of rheological behavior of biomass slurry, solute transfer theories, and enzyme kinetics, the coupling effects of flow-transfer-reaction are revealed under high-solid conditions. Based on the above basic features, this review lucidly explains the causes of high-solid hydrolysis hindrances, highlights the mismatched issues between transfer and reaction, and more importantly, presents the advanced strategies for transfer and reaction enhancements from the viewpoint of process optimization, reactor design, as well as enzyme/auxiliary additive customization.

45 multi-scale, multi-phase, enzymatic reaction↗
DOE OSTI2023

Synergistic Co-Ir/Ru Composite Electrocatalysts Impart Efficient and Durable Oxygen Evolution Catalysis in Acid

Exploring highly active and robust catalysts, which have low precious metal content, to boost the kinetically sluggish oxygen evolution reaction (OER) is a key concern for hydrogen production via proton exchange membrane water electrolysis (PEMWE). Here, in this work, rational engineering of the morphology and the local geometric ligand environment of Ir and Ru catalysts are presented by using defect-rich, lanthanum- and lithium-doped Co 3 O 4 nanofiber (LLCF) as substrate that promotes the electrocatalytic OER. Two catalysts, IrCoOx@LLCF and RuCoOx@LLCF, achieve mass activities of 1013.5 A g Ir –1 and 1911.4 A g Ru –1 in 0.1 M HClO 4 at 300 mV overpotential, respectively, which are 26 and 50 times higher than that of commercial IrO 2 and RuO 2 . Operando X-ray absorption spectroscopy unveils the reversible structure of IrCoOx during the OER and the suppression of over-oxidation of Co and Ir, giving rise to high stability. Density functional theory calculations reveal that the local geometric ligand engineering optimizes the binding of oxygenated species to the active sites, resulting in strongly enhanced catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

From thermal catalysis to plasma catalysis: a review of surface processes and their characterizations

The use of atmospheric pressure plasma to enhance catalytic chemical reactions involves complex surface processes induced by the interactions of plasma-generated fluxes with catalyst surfaces. Industrial implementation of plasma catalysis necessitates optimizing the design and realization of plasma catalytic reactors that enable chemical reactions that are superior to conventional thermal catalysis approaches. This requires the fundamental understanding of essential plasma-surface interaction mechanisms of plasma catalysis from the aspect of experimental investigation and theoretical analysis or computational modeling. In addition, experimental results are essential to validate the relative theoretical models and hypotheses of plasma catalysis that was rarely understood so far, compared to conventional thermal catalysis. This overview focuses on two important application areas, nitrogen fixation and methane reforming, and presents a comparison of important aspects of the state of knowledge of these applications when performed using either plasma-catalysis or conventional thermal catalysis. We discuss the potential advantage of plasma catalysis over thermal catalysis from the aspects of plasma induced synergistic effect and in situ catalyst regeneration. In-situ/operando surface characterization of catalysts in plasma catalytic reactors is a significant challenge since the high pressure of realistic plasma catalysis systems preclude the application of many standard surface characterization techniques that operate in a low-pressure environment. Here, we present a review of the status of experimental approaches to probe gas-surface interaction mechanisms of plasma catalysis, including an appraisal of demonstrated approaches for integrating surface diagnostic tools into plasma catalytic reactors.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Achievements of actively controlled divertor detachment compatible with sustained high confinement core in DIII-D and EAST

The compatibility of efficient divertor detachment with high-performance core plasma is vital to the development of magnetically controlled fusion energy. The joint research on the EAST and DIII-D tokamaks demonstrates successful integration of divertor detachment with excellent core plasma confinement quality, a milestone towards solving the critical plasma–wall-interaction (PWI) issue and core-edge integration for ITER and future reactors. In EAST, actively controlled partial detachment with T et,div ~ 5 eV around the strike point and H 98 > 1 in different H-mode scenarios including the high β P H-mode scenario have been achieved with ITER-like tungsten divertor, by optimizing the detachment access condition and performing detailed experiments for core-edge integration. For active long-pulse detachment feedback control, a 30 s H-mode operation with detachment-control duration being 25 s has been successfully achieved in EAST. DIII-D has achieved actively controlled fully detached divertor with low plasma electron temperature (T et,div ≤ 5 eV across the entire divertor target) and low particle flux (degree of detachment, DoD > 3), simultaneously with very high core performance (β N ~3, β P > 2 and H 98 ~ 1.5) in the high βP scenario being developed for ITER and future reactors. The high-β P high confinement scenario is characterized by an internal transport barrier (ITB) at large radius and a weak edge transport barrier (ETB, or pedestal), which are synergistically self-organized. Both the high-β P scenario and impurity seeding facilitate divertor detachment. The detachment access leads to the reduction of ETB, which facilitates the development of an even stronger ITB at large radius in the high β P scenario. Thus, this strong large radius ITB enables the core confinement improvement during detachment. In conclusion, these significant joint DIII-D and EAST advances on the compatibility of high confinement core and detached divertor show a great potential for achieving a high-performance core plasma suitable for long-pulse operation of fusion reactors with controllable steady-state PWIs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Synergistic Electrocatalytic Syngas Production from Carbon Dioxide by Bi‐Metallic Atomically Dispersed Catalysts

Abstract The production of syngas by traditional processes such as steam methane reforming is energetically intensive and produces a large amount of CO 2 emissions. In contrast, the electrochemical CO 2 reduction reaction (CO 2 RR) enables the carbon neutral production of syngas at ambient conditions. Among non‐precious metal catalysts, metal‐nitrogen‐carbon electrocatalysts are inexpensive and highly selective towards syngas production. This study examined the selectivity of mono‐ and bi‐metallic (M−N−C, M=Fe, Mo or FeMo) electrocatalysts towards syngas production. The ratio of the CO : H 2 in the syngas was tuned by modifying the ratio of the metallic precursors in the bi‐metallic FeMo−N−C catalysts, tailoring the catalysts’ selectivity towards the CO 2 RR or the hydrogen evolution reaction (HER). The catalyst synthesis temperature(s) were considered as they influence the catalyst morphology and activity. Further, the dependence of the ratio of CO : H 2 in the syngas as a function of the potential was explored for the different bi‐metallic catalysts. This work showed that by tailoring both the ratio of Fe : Mo in the bi‐metallic catalyst and optimizing the reductive potential, a CO : H 2 ratio between 0.25 to 5 was achievable. This study demonstrated a novel approach in which the ratio of the product syngas composition could be tailored in a single reaction, without the need for further downstream processing to reach a desired composition.

Delafontaine, Laurent↗
DOE OSTI2020

Review—Development of Highly Active and Durable Hybrid Compressive Platinum Lattice Catalysts for Polymer Electrolyte Membrane Fuel Cells: Mathematical Modeling and Experimental Work

This review provides a comprehensive overview on the development of highly active and durable platinum catalysts with ultra-low Pt loadings for polymer electrolyte membrane fuel cells (PEMFCs) through a combined mathematical modeling and experimental work. First, simulation techniques were applied to evaluate the validity of the Tafel approximation for the calculation of the mass activity (MA) and specific activity (SA). A one-dimensional agglomeration model was developed and solved to understand the effects of exchange current density, porosity, agglomerate size, Nafion ® film thickness, and Pt loading on the MA and SA. High porosity (> 60%) and agglomerations at high Pt loadings cause the loss of the Tafel approximation and consequently the decrease in MA and SA. A new structure parameter was introduced to estimate the real porous structure using the fractal theory. The volumetric catalyst density was corrected by the fractal dimension (measured by Hg porosimetry), which gave a good agreement with the experimental values. The loading-dependent Tafel equation was then derived, which contains both the utilization and the non-linear scaling factor. Second, activated carbon composite support (ACCS) with optimized surface area, porosity, pore size, and pore size distribution was developed. The hydrophilic/hydrophobic ratio, structural properties (amorphous/crystalline ratio), and the number of active sites were optimized through metal-catalyzed pyrolysis. Stability of ACCS and Pt/ACCS were evaluated using an accelerated stress test (AST). The results indicated that Pt/ACCS showed no significant loss of MA and power density after 5,000 cycles at 1.0–1.5 V, while the commercial Pt/C catalysts showed drastic losses of MA and power density. Finally, monolayers of compressed Pt (core–shell-type Pt 3 Co 1 ) catalysts were structured by diffusing Co atoms (previously embedded in ACCS) into Pt. Compressive Pt lattice (Pt * ) catalysts were synthesized through an annealing procedure developed at the University of South Carolina (USC). The Pt * /ACCS catalyst showed high initial power density (rated) of 0.174 g Pt kW −1 and high stability (24 mV loss) at 0.8 A cm −2 after 30,000 cycles (0.6–1.0 V). The outstanding performance of Pt * /ACCS is due to the synergistic effect of ACCS and compressive Pt * lattice.

25 ENERGY STORAGE↗
DOE OSTI2022

Stabilization of Dinuclear Rhodium and Iridium Clusters on Layered Titanate and Niobate Supports

Atomically dispersed organometallic clusters can provide well-defined nuclearity of active sites for both fundamental studies as well as new regimes of activity and selectivity in chemical transformations. More recently, dinuclear clusters adsorbed onto solid surfaces have shown novel catalytic properties resulting from the synergistic effect of two metal centers to anchor different reactant species. Difficulty in synthesizing, stabilizing, and characterizing isolated atoms and clusters without agglomeration challenges allocating catalytic performance to atomic structure. Here, we explore the stability of dinuclear rhodium and iridium clusters adsorbed onto layered titanate and niobate supports using molecular precursors. Both systems maintain their nuclearity when Statistical analysis of HAADF-STEM images revealed that rhodium and iridium dimers had mean cluster-to-cluster distances very similar to what is expected from a random distribution of atoms over a large area, indicating that they are dispersed without aggregation. The stability of dinuclear rhodium clusters supported on titanate nanosheets was also investigated by X-ray absorption fine structure (EXAFS), DRIFTS, and first-principles calculations. Both X-ray absorption spectroscopy and HAADF-STEM simulations, guided by density functional theory (DFT)-optimized structure models, suggested that rhodium dimers adsorb onto the nanosheets in an end-on binding mode that is stable up to 100 degrees C under reducing conditions. Finally, this study highlights that crystalline nanosheets derived from layered metal oxides can be used as model supports to selectively stabilize dinuclear clusters, which could have implications for heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Swinging Hydrogen Evolution to Nitrate Reduction Activity in Molybdenum Carbide by Ruthenium Doping

A common challenge for electrochemical ammonia synthesis in an aqueous phase is the consumption of Faradaic charge by the competing hydrogen evolution reaction (HER), which reduces the Faradaic efficiency for the desired conversion, i.e., the nitrate reduction reaction (NO 3 RR) to ammonium. This problem is particularly severe when a single-phase catalyst is operated at high current limits, thus a cocatalyst system that works synergistically for hydrogen acquisition and deoxygenation is needed to promote NO 3 RR over HER. For this study, we select a well-known HER catalyst Mo 2 C and investigate how metal doping can switch its kinetics from HER-dominated to NO 3 RR-dominated pathways. At 3.8 wt % Ru doping of Mo 2 C, a 75% single pass conversion of nitrate (0.1 M) to ammonium in a 16 cm 2 flow electrolyzer was achieved, corresponding to an ammonium yield rate of 9.07 mmol h –1 at a full cell voltage of 2 V. As confirmed by DFT calculations and kinetic isotope experiments, ruthenium dopants in the matrix serve as the sink point for adsorbed hydrogen during NO 3 RR to promote the cooperative deoxygenation of *NO 3 and *NO 2 on the Ru–Mo cocatalytic site. Our study suggests that optimizing hydrogen acquisition and deoxygenation reactions in cocatalytic systems is an effective strategy for electrochemical synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Zero-Carbon Biofuels: An Optimized Two-Stage System for High Productivity Conversion of CO2 to Liquid Fuels

In MIT’s Zero-Carbon Biofuels work, under ARPAe’s EcoSynBio funding, we capitalized on our previously developed technology of the oleaginous yeast, Yarrowia lipolytica, engineered to produce high titer biodiesel-like lipids and alkanes, and set out to reduce or eliminate CO 2 generation during lipid production. We set out to do this by both engineering Y. lipolytica with the necessary enzymes to allow the generation of reducing equivalents from H 2 , formic acid, or methanol, and, in parallel, installing the non-oxidative glycolysis (NOG) pathway. The goal was that combination of these two would enable stoichiometric conversion of glucose and acetate to biodiesel products. Furthermore, our ARPAe Electrofuels funded research, yielded a very innovative two-stage system where gases comprising CO 2 and H 2 are used for the production of liquid fuels. Acetate is produced from CO 2 and H 2 , via acetogenic fermentation, in the first stage as the intermediary product, then fed to Y. lipolytica in the second stage, for conversion to lipids and alkanes. To increase the commercial competitiveness of the two-stage system, by improvement to the overall productivity, we recently showed that synergistic substrate co-feeding drastically enhances CO 2 fixation rates and set out to explore additional co-substrate pairs, including methanol and formic acid, in order to maximize acetate productivity. Finally, given the attractiveness as a biofuel, we also set out to attempt an important increase in the production of alkanes over lipids in Yarrowia.

10 SYNTHETIC FUELS↗
DOE OSTI2022

Structured illumination with thermal imaging (SI-TI): A dynamically reconfigurable metrology for parallelized thermal transport characterization

The recent push for the “materials by design” paradigm requires synergistic integration of scalable computation, synthesis, and characterization. Among these, techniques for efficient measurement of thermal transport can be a bottleneck limiting the experimental database size, especially for diverse materials with a range of roughness, porosity, and anisotropy. Traditional contact thermal measurements have challenges with throughput and the lack of spatially resolvable property mapping, while non-contact pump-probe laser methods generally need mirror smooth sample surfaces and also require serial raster scanning to achieve property mapping. Here, we present structured illumination with thermal imaging (SI-TI), a new thermal characterization tool based on parallelized all-optical heating and thermometry. Experiments on representative dense and porous bulk materials as well as a 3D printed thermoelectric thick film (~50 μm) demonstrate that SI-TI (1) enables paralleled measurement of multiple regions and samples without raster scanning; (2) can dynamically adjust the heating pattern purely in software, to optimize the measurement sensitivity in different directions for anisotropic materials; and (3) can tolerate rough (~3 μm) and scratched sample surfaces. Here, this work highlights a new avenue in adaptivity and throughput for thermal characterization of diverse materials.

42 ENGINEERING↗
DOE OSTI2023

Discovery of a Hybrid System for Photocatalytic CO 2 Reduction via Attachment of a Molecular Cobalt-Quaterpyridine Complex to a Crystalline Carbon Nitride

While recent reports have demonstrated the attachment of molecular catalysts to amorphous, graphitic carbon nitrides (g-CN) for light-driven CO 2 reduction, approaches to the utilization of crystalline carbon nitrides have remained undiscovered. Herein, a functional hybrid photocatalyst system has been found using a crystalline carbon nitride semiconductor, poly(triazine imide) lithium chloride (PTI-LiCl), with a surface-attached CoCl 2 (qpy-Ph-COOH) catalyst for CO 2 reduction. The molecular catalyst attaches to PTI-LiCl at concentrations from 0.10 to 4.30 wt % and exhibits ∼96% selectivity for CO production in a CO 2 -saturated, aqueous 0.5 M KHCO 3 solution. Optimal loadings were found to be within 0.42–1.04 wt % with rates between 1,400 and 1,550 μmol CO/g·h at an irradiance of 172 mW/cm 2 (λ = 390 nm) and apparent quantum yields of ∼2%. This optimized loading is postulated to represent a balance between maximal turnover frequency (TOF; 300+ h –1 ) and excess catalyst that can limit excited-electron lifetimes, as probed via transient absorption spectroscopy. An increase in the incident irradiance yields a concomitant increase in the TOFs and CO rates only for the higher catalyst loadings, reaching up to 2,149 μmol CO/g·h with a more efficient use of the catalyst surface capacity. The lower catalyst loadings, by comparison, already function at maximal TOFs. Higher surface loadings are also found to help mitigate deactivation of the molecular catalysts during extended catalytic testing (>24 h) owing to the greater net surface capacity for CO 2 reduction, thus representing an effective strategy to extend lifetime. The hybrid particles can be deposited onto an FTO substrate to yield ∼60% Faradaic efficiency for photoelectrochemical CO production at −1.2 V vs Ag/AgCl bias. In conclusion, these results demonstrate the synergistic combination of a crystalline carbon nitride with a molecular catalyst that achieves among the highest known rates in carbon-nitride systems for the light-driven CO 2 reduction to CO in aqueous solution with >95% selectivity.

CO2 reduction↗