Search NASA⌕ Search

SEARCH · Search NASA

Results for “temperature programmed desorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

H-D Exchange of Simple Aromatics as a Measure of Brønsted-Acid Site Strengths in Solids

The relative Brønsted-acid strengths of H-[Al]ZSM-5, H-[Fe]ZSM-5, H-[B]ZSM-5, silicalite, P-SPP, tungstated zirconia, ZrO2, and γ-Al2O3 were studied using H-D exchange with toluene and chlorobenzene. Temperature programmed desorption (TPD) of toluene-h8 and chlorobenzene-h5 from the deuterated forms of H-[Al]ZSM-5, H-[Fe]ZSM-5, and P-SPP demonstrated that the temperature at which H-D exchange rates become significant change with the proton affinity of the aromatic molecule and the strength of the Brønsted sites. The steady-state, gas-phase reaction between D2O and the aromatic molecules were consistent with the TPD results and allowed the Brønsted-acid site strengths to be ordered as follows: H-[Al]ZSM-5 > H-[Fe]ZSM-5 > tungstated zirconia > P-SPP > H-[B]ZSM-5. H-D exchange was also observed at high temperatures with ZrO2 and γ-Al2O3 but it appears that the reaction mechanism with these Lewis acids is different because reaction with toluene and chlorobenzene occur at nearly the same temperature. It is suggested that the H-D exchange reaction with simple aromatic molecules is a useful way to probe Brønsted acidity in solids

bio-inspired↗

Conversion of Formic Acid on Single- and Nano-Crystalline Anatase TiO 2 (101)

Understanding thermochemical transformations of formic acid (FA) on metal oxide surfaces is important for many catalytical reactions. Here we study thermally induced reactions of FA on a single-crystalline and nanocrystalline anatase TiO 2 (101). We employ a combination of scanning tunneling microscopy (STM), temperature-programmed desorption (TPD), infrared reflection absorption spectroscopy (IRAS), diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and density functional theory (DFT) to follow the FA surface intermediates and reaction products above room temperature. We find that the primary reaction products desorbing at about 300, 480, and 515 K are molecular water, carbon monoxide, and formaldehyde, respectively. Bidentate (BD) formate and bridging hydroxyl (HO b ) are identified as central intermediates in the FA transformations. Bridging oxygen vacancies (V O ) are also likely participants despite their low stability at the surface. In conclusion, the parallel studies on single crystals and faceted TiO 2 (101) nanoparticles reveal the spectroscopic commonalities of surface species and of the thermal conversion of molecular and deprotonated forms of FA.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxygen diffusion and reactivity at low temperature on bare amorphous olivine-type silicate

The mobility of O atoms at very low temperatures is not generally taken into account, despite O diffusion would add to a series of processes leading to the observed rich molecular diversity in space. We present a study of the mobility and reactivity of O atoms on an amorphous silicate surface. Our results are in the form of reflection absorption infrared spectroscopy and temperature-programmed desorption spectra of O{sub 2} and O{sub 3} produced via two pathways: O + O and O{sub 2} + O, investigated in a submonolayer regime and in the range of temperature between 6.5 and 30 K. All the experiments show that ozone is formed efficiently on silicate at any surface temperature between 6.5 and 30 K. The derived upper limit for the activation barriers of O + O and O{sub 2} + O reactions is ∼150 K/k{sub b}. Ozone formation at low temperatures indicates that fast diffusion of O atoms is at play even at 6.5 K. Through a series of rate equations included in our model, we also address the reaction mechanisms and show that neither the Eley–Rideal nor the hot atom mechanisms alone can explain the experimental values. The rate of diffusion of O atoms, based on modeling results, is much higher than the one generally expected, and the diffusive process proceeds via the Langmuir-Hinshelwood mechanism enhanced by tunnelling. In fact, quantum effects turn out to be a key factor that cannot be neglected in our simulations. Astrophysically, efficient O{sub 3} formation on interstellar dust grains would imply the presence of huge reservoirs of oxygen atoms. Since O{sub 3} is a reservoir of elementary oxygen, and also of OH via its hydrogenation, it could explain the observed concomitance of CO{sub 2} and H{sub 2}O in the ices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interaction of Formaldehyde with the Rutile TiO 2 (110) Surface: A Combined Experimental and Theoretical Study

The adsorption and reaction of formaldehyde (CH 2 O) on the oxidized rutile TiO 2 (110) surface were studied by temperature programmed desorption (TPD), scanning tunneling microscopy (STM), infrared reflection-absorption spectroscopy (IRRAS) and density functional theory (DFT) calculations. The experimental and theoretical data reveal the presence of various species depending on the temperature and coverage. After formaldehyde adsorption on TiO 2 (110) at 65 K, the multilayer CH 2 O was detected, which desorbs completely upon heating to 120 K. The isolated CH 2 O monomer was identified after submonolayer adsorption at low temperatures (45-65 K), in which CH 2 O is bound to the surface Ti5c sites via σ-donation and adopts a tilted geometry. With heating to higher temperatures the CH 2 O monomers remain stable up to 70 K and then undergo coupling reactions to form paraformaldehyde (polyoxymethylene, POM) at the Ti 5c rows. The POM chain is oriented primarily along the [001] direction in a slightly disordered configuration. POM becomes the predominant species at 120 K and is decomposed releasing CH 2 O at about 250 K. In addition, dioxymethylene (DOM) was detected as minority species formed via reaction of Ti 5c -bound CH 2 O with both neighboring O 2c along the [1-10] direction and oxygen adatoms (Oad) at Ti 5c sites along [001] on the oxidized TiO 2 (110) surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxidation of CO by NO on planar and faceted Ir(210)

Oxidation of CO by pre-adsorbed NO has been studied on planar Ir(210) and nanofaceted Ir(210) with average facet sizes of 5 nm and 14 nm by temperature programmed desorption (TPD). Both surfaces favor oxidation of CO to CO 2 , which is accompanied by simultaneous reduction of NO with high selectivity to N 2 . At low NO pre-coverage, the temperature (T i ) for the onset of CO 2 desorption as well as CO 2 desorption peak temperature (T p ) decreases with increasing CO exposure, and NO dissociation is affected by co-adsorbed CO. At high NO pre-coverage, T i and T p are independent of CO exposure, and co-adsorbed CO has no influence on dissociation of NO. Moreover, at low NO pre-coverage, planar Ir(210) is more active than faceted Ir(210) for oxidation of CO to CO 2 : T i and T p are much lower on planar Ir(210) than that on faceted Ir(210). In addition, faceted Ir(210) with an average facet size of 5 nm is more active for oxidation of CO to CO 2 than faceted Ir(210) with an average facet size of 14 nm, i.e., oxidation of CO by pre-adsorbed NO on faceted Ir(210) exhibits size effects on the nanometer scale. In comparison, at low O pre-coverage planar Ir(210) is more active than faceted Ir(210) for oxidation of CO to CO 2 but no evidence has been found for size effects in oxidation of CO by pre-adsorbed oxygen on faceted Ir(210) for average facet sizes of 5 nm and 14 nm. The TPD data indicate the same reaction pathway for CO 2 formation from CO + NO and CO + O reactions on planar Ir(210). Lastly, the adsorption sites of CO, NO, O, CO + O, and CO + NO on Ir are characterized by density functional theory.

36 MATERIALS SCIENCE↗

Adsorption, Desorption, and Displacement Kinetics of H2O and CO2 on Forsterite, Mg2SiO4(011)

We have examined the adsorbate-substrate interaction kinetics of CO2 and H2O on a natural forsterite crystal surface, Mg2SiO4(011), with 10-15% of substitutional Fe2+. We use temperature programmed desorption (TPD) and molecular beam techniques to determine the adsorption, desorption, and displacement kinetics for H2O and CO2. Neither CO2 nor H2O has distinct sub-monolayer desorption peaks but instead both have a broad continuous desorption feature that evolve smoothly into multilayer desorption. Inversion of the monolayer coverage spectra for both molecules reveals that the corresponding binding energies for H2O are greater than that for CO2 on all sites. The relative strength of these interactions is the dominant factor in the competitive adsorption/displacement kinetics. In experiments where the two adsorbates are co-dosed, H2O always binds to the highest energy binding sites available and displaces CO2. The onset of CO2 displacement by H2O occurs between 65 and 75 K.

Environmental Molecular Sciences Laboratory↗

Probing direct carbon-carbon acylation of furans and long-chain acids over H-ZSM-5

The acylation of furan and 2-methylfuran (2-MF) with acetic acid (AA) and 1-hexanoic acid (HA) was studied over an H-ZSM-5 catalyst. Temperature-programmed desorption (TPD) measurements showed evidence that AA adsorbs strongly at Brønsted sites, with reaction to CO 2 and acetone beginning at 523 K, while both furan and 2-MF oligomerize upon adsorption at room temperature. Steady-state, flow-reactor measurements demonstrate that selectivities for the acylation reactions can approach 100% below 523 K when reactions are operated in excess organic acids, with maximum conversion limited by equilibrium. Coking becomes important when the reaction is operated in excess furan or 2-MF and at high reactant concentrations, while ketonization products are observed when the reaction is performed above 523 K. Lastly, potential uses for the reactions are discussed.

1-Hexanoic Acid↗

Chemistry of Cu(acac){sub 2} on Ni(110) and Cu(110) surfaces: Implications for atomic layer deposition processes

The thermal chemistry of copper(II)acetylacetonate, Cu(acac){sub 2}, on Ni(110) and Cu(110) single-crystal surfaces was probed under vacuum by using x-ray photoelectron spectroscopy (XPS) and temperature programmed desorption (TPD). Some data for acetylacetone (Hacac, CH{sub 3}COCH{sub 2}COCH{sub 3}) adsorbed on Ni(110) are also reported as reference. Chemical transformations were identified in several steps covering a temperature range from 150 K to at least 630 K. The desorption of Hacac and a 3-oxobutanal (CH{sub 3}COCH{sub 2}CHO) byproduct was observed first at 150 and 180 K on Ni(110) and at 160 and 185 K on Cu(110), respectively. Partial loss of the acetylacetonate (acac) ligands and a likely change in adsorption geometry are seen next, with the possible production of HCu(acac), which desorbs at 200 and 235 K from the nickel and copper surfaces, respectively. Molecular Cu(acac){sub 2} desorption is observed on both surfaces at approximately 300 K, probably from recombination of Cu(acac) and acac surface species. The remaining copper atoms on the surface lose their remaining acac ligands to the substrate and become reduced directly to metallic copper. At the same time, the organic ligands follow a series of subsequent surface reactions, probably involving several C-C bond-scissions, to produce other fragments, additional Hacac and HCu(acac) in the gas phase in the case of the copper surface, and acetone on nickel. A significant amount of acac must nevertheless survive on the surface to high temperatures, because Hacac peaks are seen in the TPD at about 515 and 590 K and the C 1s XPS split associated with acac is seen up to close to 500 K. In terms of atomic layer deposition processes, this suggests that cycles could be design to run at such temperatures as long as an effective hydrogenation agent is used as the second reactant to remove the surface acac as Hacac. Only a small fraction of carbon is left behind on Ni after heating to 800 K, whereas more carbon and additional oxygen remains on the surface in the case of Cu.

36 MATERIALS SCIENCE↗

CO Adsorption on Au Nanoparticles Grown on Hexagonal Boron Nitride/Rh(111)

CO adsorption on size-controlled Au nanoparticles grown on an $h$-BN/Rh(111) nanomesh surface has been examined to probe their potential catalytic properties. A combination of high-resolution electron energy loss spectroscopy (HREELS), temperature-programmed desorption (TPD), and density functional theory (DFT) calculations demonstrate that the CO adsorption strength depends heavily on the Au deposition coverage and particle morphology. Particles resulting from low Au coverages deposited at the liquid nitrogen temperature exhibit significantly enhanced CO binding relative to bulk crystalline Au. The resulting CO TPD spectra, and the significantly red-shifted C–O stretching frequency and negative charging of the Au nanoparticles as evidenced by HREELS and DFT, all correspond to those reported for catalytically active Au nanoparticles grown on reactive metal oxides, even though the h-BN/Rh(111) surface is free of carbon, oxygen, or defects. DFT modeling further suggests that the enhanced CO adsorption occurs at highly undercoordinated Au atoms on the perimeters of the nanoparticles. As the Au coverage is increased, the CO adsorption energy and C–O stretching frequency converge toward values associated with bulk Au. Annealing to 600 K results in bulk-like CO adsorption characteristics at any Au coverage. These results suggest that the $h$-BN/Rh(111) surface represents a potential platform for evaluating the role of Au vs support in low-temperature CO oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SPIN TEMPERATURE OF WATER MOLECULES DESORBED FROM THE SURFACES OF AMORPHOUS SOLID WATER, VAPOR-DEPOSITED AND PRODUCED FROM PHOTOLYSIS OF A CH{sub 4}/O{sub 2} SOLID MIXTURE

The nuclear-spin temperature of molecules observed in interstellar space or cometary coma is an important key to understanding physical and chemical histories of the molecules. The present Letter reports measurements of nuclear-spin states and rotational temperatures of thermally desorbed H{sub 2}O molecules from amorphous solid water (ASW) by combining temperature-programmed desorption and resonance-enhanced multiphoton ionization (REMPI). REMPI spectra of desorbed H{sub 2}O molecules were measured at {approx}150 K from vapor-deposited ASW at 8 K. The nuclear-spin temperature of desorbed H{sub 2}O molecules exhibits almost an upper limit to the ortho-to-para ratio of close to 3. No discernible change was observed in the H{sub 2}O REMPI spectrum, neither after leaving the deposited ASW for 9 days in a vacuum chamber at 8 K, nor in the presence of O{sub 2} molecules, nor upon exposure of ASW to vacuum-ultraviolet (VUV) photons. Desorbed H{sub 2}O molecules were also investigated from ASW produced by VUV irradiation of a CH{sub 4}/O{sub 2} mixture at 8 K. The resulting H{sub 2}O spectrum showed a high nuclear-spin temperature. These results suggest that the nuclear-spin temperatures of gaseous H{sub 2}O molecules thermally desorbed from ice do not necessarily reflect the surface temperature at which H{sub 2}O molecules condensed or formed under some laboratory conditions. We discuss the possibility of nuclear-spin conversion of H{sub 2}O in water ice. The present study advocates the importance of further studies to give an interpretation of nuclear-spin temperatures of molecules observed in interstellar space or cometary coma.

74 ATOMIC AND MOLECULAR PHYSICS↗

General H2O Outgassing Model Applicable to Silica-Filled Silicones

Moisture-induced agining and degradation are continuing concerns in long-term storage and use of silicone materials. The silica fillers frequently used to provide mechanical reinforcement in silicone formulations have a high affinity for H2O and act as a source of moisture outgassing later when placed in dry or vacuum applications.

36 MATERIALS SCIENCE↗

Hydrogen and methoxy coadsorption in the computation of the catalytic conversion of methanol on the ceria (111) surface

Methanol decomposition to formaldehyde catalyzed by the ceria (111) surface has been investigated using the DFT + U method. Our results rationalize experimental temperature programmed desorption experiments on the fully oxidized surface. Particular attention has been paid to the model correctness of methoxy with coadsorbed hydrogen on the surface. This issue has been raised by the experimental observation of water desorption at low temperature removing hydrogen from the system. Our investigation also includes hydrogen diffusion as a means of hydrogen removal. We find that the presence of methoxy reduces the reaction energy for water formation considerably. In addition, the preference of the electron to locate at the methoxy oxygen results in a dehydrated surface that does not contain Ce 3+ ions, despite the existence of a vacancy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Desorption Kinetics and Binding Energies of Small Hydrocarbons

Small hydrocarbons are a vital organic reservoir in protostellar and protoplanetary environments. Constraints on desorption temperatures and binding energies of such hydrocarbons are essential for accurate predictions of where these molecules exist in the ice versus gas phase during the different stages of star and planet formation. Here, through a series of temperature programmed desorption experiments, we constrain the binding energies of 2- and 3-carbon hydrocarbons (C 2 H 2 —acetylene, C 2 H 4 —ethylene, C 2 H 6 —ethane, C 3 H 4 —propyne, C 3 H 6 —propene, and C 3 H 8 —propane) to 2200–4200 K in the case of pure amorphous ices, to 2400–4400 K on compact amorphous H 2 O, and to 2800–4700 K on porous amorphous H 2 O. The 3-carbon hydrocarbon binding energies are always larger than the 2-carbon hydrocarbon binding energies. Within the 2- and 3-carbon hydrocarbon families, the alkynes (i.e., least-saturated) hydrocarbons exhibit the largest binding energies, while the alkane and alkene binding energies are comparable. Binding energies are ~5%–20% higher on water ice substrates compared to pure ices, which is a small increase compared to what has been measured for other volatile molecules such as CO and N 2 . Thus in the case of hydrocarbons, H 2 O has a less pronounced effect on sublimation front locations (i.e., snowlines) in protoplanetary disks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Desorption and sublimation kinetics for fluorinated aluminum nitride surfaces

The adsorption and desorption of halogen and other gaseous species from surfaces is a key fundamental process for both wet chemical and dry plasma etch and clean processes utilized in nanoelectronic fabrication processes. Therefore, to increase the fundamental understanding of these processes with regard to aluminum nitride (AlN) surfaces, temperature programmed desorption (TPD) and x-ray photoelectron spectroscopy (XPS) have been utilized to investigate the desorption kinetics of water (H{sub 2}O), fluorine (F{sub 2}), hydrogen (H{sub 2}), hydrogen fluoride (HF), and other related species from aluminum nitride thin film surfaces treated with an aqueous solution of buffered hydrogen fluoride (BHF) diluted in methanol (CH{sub 3}OH). Pre-TPD XPS measurements of the CH{sub 3}OH:BHF treated AlN surfaces showed the presence of a variety of Al-F, N-F, Al-O, Al-OH, C-H, and C-O surfaces species in addition to Al-N bonding from the AlN thin film. The primary species observed desorbing from these same surfaces during TPD measurements included H{sub 2}, H{sub 2}O, HF, F{sub 2}, and CH{sub 3}OH with some evidence for nitrogen (N{sub 2}) and ammonia (NH{sub 3}) desorption as well. For H{sub 2}O, two desorption peaks with second order kinetics were observed at 195 and 460 °C with activation energies (E{sub d}) of 51 ± 3 and 87 ± 5 kJ/mol, respectively. Desorption of HF similarly exhibited second order kinetics with a peak temperature of 475 °C and E{sub d} of 110 ± 5 kJ/mol. The TPD spectra for F{sub 2} exhibited two peaks at 485 and 585 °C with second order kinetics and E{sub d} of 62 ± 3 and 270 ± 10 kJ/mol, respectively. These values are in excellent agreement with previous E{sub d} measurements for desorption of H{sub 2}O from SiO{sub 2} and AlF{sub x} from AlN surfaces, respectively. The F{sub 2} desorption is therefore attributed to fragmentation of AlF{sub x} species in the mass spectrometer ionizer. H{sub 2} desorption exhibited an additional high temperature peak at 910 °C with E{sub d} = 370 ± 10 kJ/mol that is consistent with both the dehydrogenation of surface AlOH species and H{sub 2} assisted sublimation of AlN. Similarly, N{sub 2} exhibited a similar higher temperature desorption peak with E{sub d} = 535 ± 40 kJ/mol that is consistent with the activation energy for direct sublimation of AlN.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Designing Open Metal Sites in Metal–Organic Frameworks for Paraffin/Olefin Separations

Incorporating open metal sites (OMS) into metal–organic frameworks allows design of well-defined binding sites for selective molecular adsorption, which has a profound impact on catalysis and separations. We demonstrate that Cu(I) sites incorporated into MFU- 4 l preferentially adsorb olefins over paraffins. Density functional theory (DFT) calculations show that the OMS are independent, with no dependence of binding energy on olefin loading up to one olefin per Cu(I). Experimentally, increasing Cu(I) loading increased olefin uptake without affecting the binding energy, as predicted by DFT and confirmed by temperature-programmed desorption. The potential of this material for olefin/paraffin separation under ambient conditions was investigated by gas adsorption and column breakthrough experiments for an equimolar ratio of olefin/paraffin. High-grade propylene and ethylene (>99.999%) can be generated using temperature–concentration swing recycling from a Cu(I)-MFU-4l packed column with no measurable paraffin breakthrough.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗